final1

1 files changed, 3 insertions, 3 deletions

diff --git a/text/labina.tex b/text/labina.tex
index 4664183..62dee1b 100644
--- a/text/labina.tex
+++ b/text/labina.tex
@@ -129,7 +129,7 @@ Its key features are \cite{ppkdatasheet}:
 
 The measurement setup of nRF9161 DK with PPK II in EMC chamber and addition attenuators can be seen in figure \ref{fig:ppkmeas}. Antennas connected to the other end of coaxial cable can be seen in figure \ref{fig:emcant}. These development kits from Nordic enable a direct connection of serial ampere meter using special pins. This is them main reason why both boards were chosen for this measurement. 
 
-\begin{figure}[H]
+\begin{figure}[h]
 	\begin{center}
 		\includegraphics[width=0.8\textwidth]{obrazky/nrfppkemc.jpg}
 	\end{center}
@@ -137,7 +137,7 @@ The measurement setup of nRF9161 DK with PPK II in EMC chamber and addition atte
 	\label{fig:ppkmeas}
 \end{figure}
 
-\begin{figure}[H]
+\begin{figure}[h]
 	\begin{center}
 		\includegraphics[width=0.6\textwidth]{obrazky/31_anthenna3.JPG}
 	\end{center}
@@ -273,7 +273,7 @@ $$
 
 S is sensitivity in dBm, SF is LoRa speeding factor number, 2.5 is lowering of sensitivity in dB per SF and -137 is sensitivity of SX1262 for SF 12 in dBm.
 
-These data were integrated into chart with measured data for NB-IoT and LTE-M as you can see in figure \ref{complora}.
+These data were integrated into chart with measured data for NB-IoT and LTE-M as you can see in figure \ref{fig:complora}.
 
 \begin{figure}[H]
     \begin{center}