bme680 added

1 files changed, 0 insertions, 150 deletions

diff --git a/nrfdemo/builddk/tfm/api_ns/platform/include/boot_hal.h b/nrfdemo/builddk/tfm/api_ns/platform/include/boot_hal.h
deleted file mode 100644
index 0238241..0000000
--- a/nrfdemo/builddk/tfm/api_ns/platform/include/boot_hal.h
+++ /dev/null
@@ -1,150 +0,0 @@
-/*
- * Copyright (c) 2019-2023, Arm Limited. All rights reserved.
- * Copyright (c) 2020 STMicroelectronics. All rights reserved.
- *
- * SPDX-License-Identifier: BSD-3-Clause
- *
- */
-
-#ifndef __BOOT_HAL_H__
-#define __BOOT_HAL_H__
-
-#include <stdint.h>
-#include <stddef.h>
-#include <stdbool.h>
-#include "cmsis_compiler.h"
-
-/* Include header section */
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-struct boot_arm_vector_table {
-    uint32_t msp;
-    uint32_t reset;
-};
-
-/*
- * \brief It clears that part of the RAM which was used by MCUBoot, expect the
- *        TFM_SHARED_DATA area, which is used to pass data to the TF-M runtime.
- *
- * \note  This function must be implemented per target platform by system
- *        integrator. If the bootloader has not loaded any secret to the shared
- *        RAM then this function can immediately return to shorten the boot-up
- *        time. Clearing RAM area can be done several way, it is platform
- *        dependent:
- *        - Overwritten with a pre-defined constant value (i.e.: 0).
- *        - Overwritten with a random value.
- *        - Change the secret if its location is known.
- *        - Set a register which can hide some part of the flash/RAM against
- *          next stage software components.
- *        - Etc.
- */
-void boot_clear_ram_area(void);
-
-/*
- * \brief Chain-loading the next image in the boot sequence.
- *        Can be overridden for platform specific initialization.
- * \param[in] reset_handler_addr Address of next image's Reset_Handler() in
-                                 the boot chain (TF-M SPE, etc.)
- */
-void boot_jump_to_next_image(uint32_t reset_handler_addr) __NO_RETURN;
-
-/**
- * \brief Platform peripherals and devices initialization.
- *        Can be overridden for platform specific initialization.
- *
- * \return Returns 0 on success, non-zero otherwise
- */
-int32_t boot_platform_init(void);
-
-/**
- * \brief Perform later platform specific initialization. Runs at the end of the
- *        boot initialization phase, for platform-specific code that depends on
- *        other initialization code being run beforehand.
- *
- * \return Returns 0 on success, non-zero otherwise
- */
-int32_t boot_platform_post_init(void);
-
-/**
- * \brief Platform operation to start secure image.
- *        Can be overridden for platform specific initialization.
- *
- * \param[in] vt  pointer to secure application vector table descriptor
- */
-void boot_platform_quit(struct boot_arm_vector_table *vt) __NO_RETURN;
-
-/**
- * \brief Platform operation to perform steps required before image load.
- *        Can be overridden for platform specific initialization.
- *
- * \param[in] image_id  The ID of the image that is about to be loaded.
- *
- * \return Returns 0 on success, non-zero otherwise
- */
-int boot_platform_pre_load(uint32_t image_id);
-
-/**
- * \brief Platform operation to perform steps required after image load.
- *        Can be overridden for platform specific initialization.
- *
- * \param[in] image_id  The ID of the image that has just been loaded.
- *
- * \return Returns 0 on success, non-zero otherwise
- */
-int boot_platform_post_load(uint32_t image_id);
-
-/**
- * Version of a SW component, to be encoded as "major.minor.revision+build_num".
- */
-struct boot_measurement_version {
-    uint8_t major;
-    uint8_t minor;
-    uint16_t revision;
-    uint32_t build_num;
-};
-
-struct boot_measurement_metadata {
-    uint32_t measurement_type;  /* Identifier of the measurement method
-                                 * used to compute the measurement value.
-                                 */
-    uint8_t signer_id[64];      /* Signer identity (hash of public key). */
-    size_t  signer_id_size;     /* Size of the signer's ID in bytes. */
-    char sw_type[10];           /* Representing the role of the SW component. */
-    struct boot_measurement_version sw_version; /* Version of the SW component */
-};
-
-/**
- * \brief Stores single boot measurement and associated metadata in a
- *        non-persistent storage to a known location.
- *
- * \note  The measurement values and associated metadata are stored at a known
- *        location where they can be accessed later at runtime from secure
- *        software.
- *
- * \param[in] index                 In which measurement slot to store,
- *                                  the largest allowed index is 63 (0x3F).
- * \param[in] measurement           Pointer to buffer that stores the
- *                                  measurement value.
- * \param[in] measurement_size      Size of the measurement value in bytes.
- * \param[in] metadata              Pointer to a structure, containing the
- *                                  associated metadata.
- * \param[in] lock_measurement      If true, it locks the measurement slot and
- *                                  it is not allowed the extend it anymore with
- *                                  additional measurement values.
- *
- * \return Returns 0 on success, non-zero otherwise.
- */
-int boot_store_measurement(uint8_t index,
-                           const uint8_t *measurement,
-                           size_t measurement_size,
-                           const struct boot_measurement_metadata *metadata,
-                           bool lock_measurement);
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* __BOOT_HAL_H__ */