diff options
Diffstat (limited to 'nrfdemo/builddk/tfm/api_ns/platform/ext/driver')
3 files changed, 614 insertions, 0 deletions
diff --git a/nrfdemo/builddk/tfm/api_ns/platform/ext/driver/Driver_Common.h b/nrfdemo/builddk/tfm/api_ns/platform/ext/driver/Driver_Common.h new file mode 100644 index 0000000..cdf44b3 --- /dev/null +++ b/nrfdemo/builddk/tfm/api_ns/platform/ext/driver/Driver_Common.h @@ -0,0 +1,69 @@ +/* + * Copyright (c) 2013-2016 ARM Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + * $Date: 2. Jan 2014 + * $Revision: V2.00 + * + * Project: Common Driver definitions + */ + +/* History: + * Version 2.00 + * Changed prefix ARM_DRV -> ARM_DRIVER + * Added General return codes definitions + * Version 1.10 + * Namespace prefix ARM_ added + * Version 1.00 + * Initial release + */ + +#ifndef __DRIVER_COMMON_H +#define __DRIVER_COMMON_H + +#include <stddef.h> +#include <stdint.h> +#include <stdbool.h> + +#define ARM_DRIVER_VERSION_MAJOR_MINOR(major,minor) (((major) << 8) | (minor)) + +/** +\brief Driver Version +*/ +typedef struct _ARM_DRIVER_VERSION { + uint16_t api; ///< API version + uint16_t drv; ///< Driver version +} ARM_DRIVER_VERSION; + +/* General return codes */ +#define ARM_DRIVER_OK 0 ///< Operation succeeded +#define ARM_DRIVER_ERROR -1 ///< Unspecified error +#define ARM_DRIVER_ERROR_BUSY -2 ///< Driver is busy +#define ARM_DRIVER_ERROR_TIMEOUT -3 ///< Timeout occurred +#define ARM_DRIVER_ERROR_UNSUPPORTED -4 ///< Operation not supported +#define ARM_DRIVER_ERROR_PARAMETER -5 ///< Parameter error +#define ARM_DRIVER_ERROR_SPECIFIC -6 ///< Start of driver specific errors + +/** +\brief General power states +*/ +typedef enum _ARM_POWER_STATE { + ARM_POWER_OFF, ///< Power off: no operation possible + ARM_POWER_LOW, ///< Low Power mode: retain state, detect and signal wake-up events + ARM_POWER_FULL ///< Power on: full operation at maximum performance +} ARM_POWER_STATE; + +#endif /* __DRIVER_COMMON_H */ diff --git a/nrfdemo/builddk/tfm/api_ns/platform/ext/driver/Driver_Flash.h b/nrfdemo/builddk/tfm/api_ns/platform/ext/driver/Driver_Flash.h new file mode 100644 index 0000000..287add1 --- /dev/null +++ b/nrfdemo/builddk/tfm/api_ns/platform/ext/driver/Driver_Flash.h @@ -0,0 +1,204 @@ +/* + * Copyright (c) 2013-2017 ARM Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + * $Date: 2. Feb 2017 + * $Revision: V2.1 + * + * Project: Flash Driver definitions + */ + +/* History: + * Version 2.1 + * ARM_FLASH_STATUS made volatile + * Version 2.0 + * Renamed driver NOR -> Flash (more generic) + * Non-blocking operation + * Added Events, Status and Capabilities + * Linked Flash information (GetInfo) + * Version 1.11 + * Changed prefix ARM_DRV -> ARM_DRIVER + * Version 1.10 + * Namespace prefix ARM_ added + * Version 1.00 + * Initial release + */ + +#ifndef DRIVER_FLASH_H_ +#define DRIVER_FLASH_H_ + +#ifdef __cplusplus +extern "C" +{ +#endif + +#include "Driver_Common.h" + +#define ARM_FLASH_API_VERSION ARM_DRIVER_VERSION_MAJOR_MINOR(2,1) /* API version */ + + +#define _ARM_Driver_Flash_(n) Driver_Flash##n +#define ARM_Driver_Flash_(n) _ARM_Driver_Flash_(n) + + +#define ARM_FLASH_SECTOR_INFO(addr,size) { (addr), (addr)+(size)-1 } + +/** +\brief Flash Sector information +*/ +typedef struct _ARM_FLASH_SECTOR { + uint32_t start; ///< Sector Start address + uint32_t end; ///< Sector End address (start+size-1) +} const ARM_FLASH_SECTOR; + +/** +\brief Flash information +*/ +typedef struct _ARM_FLASH_INFO { + ARM_FLASH_SECTOR *sector_info; ///< Sector layout information (NULL=Uniform sectors) + uint32_t sector_count; ///< Number of sectors + uint32_t sector_size; ///< Uniform sector size in bytes (0=sector_info used) + uint32_t page_size; ///< Optimal programming page size in bytes + uint32_t program_unit; ///< Smallest programmable unit in bytes + uint8_t erased_value; ///< Contents of erased memory (usually 0xFF) +} const ARM_FLASH_INFO; + + +/** +\brief Flash Status +*/ +typedef volatile struct _ARM_FLASH_STATUS { + uint32_t busy : 1; ///< Flash busy flag + uint32_t error : 1; ///< Read/Program/Erase error flag (cleared on start of next operation) + uint32_t reserved : 30; +} ARM_FLASH_STATUS; + + +/****** Flash Event *****/ +#define ARM_FLASH_EVENT_READY (1UL << 0) ///< Flash Ready +#define ARM_FLASH_EVENT_ERROR (1UL << 1) ///< Read/Program/Erase Error + + +// Function documentation +/** + \fn ARM_DRIVER_VERSION ARM_Flash_GetVersion (void) + \brief Get driver version. + \return \ref ARM_DRIVER_VERSION +*/ +/** + \fn ARM_FLASH_CAPABILITIES ARM_Flash_GetCapabilities (void) + \brief Get driver capabilities. + \return \ref ARM_FLASH_CAPABILITIES +*/ +/** + \fn int32_t ARM_Flash_Initialize (ARM_Flash_SignalEvent_t cb_event) + \brief Initialize the Flash Interface. + \param[in] cb_event Pointer to \ref ARM_Flash_SignalEvent + \return \ref execution_status +*/ +/** + \fn int32_t ARM_Flash_Uninitialize (void) + \brief De-initialize the Flash Interface. + \return \ref execution_status +*/ +/** + \fn int32_t ARM_Flash_PowerControl (ARM_POWER_STATE state) + \brief Control the Flash interface power. + \param[in] state Power state + \return \ref execution_status +*/ +/** + \fn int32_t ARM_Flash_ReadData (uint32_t addr, void *data, uint32_t cnt) + \brief Read data from Flash. + \param[in] addr Data address. + \param[out] data Pointer to a buffer storing the data read from Flash. + \param[in] cnt Number of data items to read. + \return number of data items read or \ref execution_status +*/ +/** + \fn int32_t ARM_Flash_ProgramData (uint32_t addr, const void *data, uint32_t cnt) + \brief Program data to Flash. + \param[in] addr Data address. + \param[in] data Pointer to a buffer containing the data to be programmed to Flash. + \param[in] cnt Number of data items to program. + \return number of data items programmed or \ref execution_status +*/ +/** + \fn int32_t ARM_Flash_EraseSector (uint32_t addr) + \brief Erase Flash Sector. + \param[in] addr Sector address + \return \ref execution_status +*/ +/** + \fn int32_t ARM_Flash_EraseChip (void) + \brief Erase complete Flash. + Optional function for faster full chip erase. + \return \ref execution_status +*/ +/** + \fn ARM_FLASH_STATUS ARM_Flash_GetStatus (void) + \brief Get Flash status. + \return Flash status \ref ARM_FLASH_STATUS +*/ +/** + \fn ARM_FLASH_INFO * ARM_Flash_GetInfo (void) + \brief Get Flash information. + \return Pointer to Flash information \ref ARM_FLASH_INFO +*/ + +/** + \fn void ARM_Flash_SignalEvent (uint32_t event) + \brief Signal Flash event. + \param[in] event Event notification mask + \return none +*/ + +typedef void (*ARM_Flash_SignalEvent_t) (uint32_t event); ///< Pointer to \ref ARM_Flash_SignalEvent : Signal Flash Event. + + +/** +\brief Flash Driver Capabilities. +*/ +typedef struct _ARM_FLASH_CAPABILITIES { + uint32_t event_ready : 1; ///< Signal Flash Ready event + uint32_t data_width : 2; ///< Data width: 0=8-bit, 1=16-bit, 2=32-bit + uint32_t erase_chip : 1; ///< Supports EraseChip operation + uint32_t reserved : 28; ///< Reserved (must be zero) +} ARM_FLASH_CAPABILITIES; + + +/** +\brief Access structure of the Flash Driver +*/ +typedef struct _ARM_DRIVER_FLASH { + ARM_DRIVER_VERSION (*GetVersion) (void); ///< Pointer to \ref ARM_Flash_GetVersion : Get driver version. + ARM_FLASH_CAPABILITIES (*GetCapabilities)(void); ///< Pointer to \ref ARM_Flash_GetCapabilities : Get driver capabilities. + int32_t (*Initialize) (ARM_Flash_SignalEvent_t cb_event); ///< Pointer to \ref ARM_Flash_Initialize : Initialize Flash Interface. + int32_t (*Uninitialize) (void); ///< Pointer to \ref ARM_Flash_Uninitialize : De-initialize Flash Interface. + int32_t (*PowerControl) (ARM_POWER_STATE state); ///< Pointer to \ref ARM_Flash_PowerControl : Control Flash Interface Power. + int32_t (*ReadData) (uint32_t addr, void *data, uint32_t cnt); ///< Pointer to \ref ARM_Flash_ReadData : Read data from Flash. + int32_t (*ProgramData) (uint32_t addr, const void *data, uint32_t cnt); ///< Pointer to \ref ARM_Flash_ProgramData : Program data to Flash. + int32_t (*EraseSector) (uint32_t addr); ///< Pointer to \ref ARM_Flash_EraseSector : Erase Flash Sector. + int32_t (*EraseChip) (void); ///< Pointer to \ref ARM_Flash_EraseChip : Erase complete Flash. + ARM_FLASH_STATUS (*GetStatus) (void); ///< Pointer to \ref ARM_Flash_GetStatus : Get Flash status. + ARM_FLASH_INFO * (*GetInfo) (void); ///< Pointer to \ref ARM_Flash_GetInfo : Get Flash information. +} const ARM_DRIVER_FLASH; + +#ifdef __cplusplus +} +#endif + +#endif /* DRIVER_FLASH_H_ */ diff --git a/nrfdemo/builddk/tfm/api_ns/platform/ext/driver/Driver_USART.h b/nrfdemo/builddk/tfm/api_ns/platform/ext/driver/Driver_USART.h new file mode 100644 index 0000000..237496b --- /dev/null +++ b/nrfdemo/builddk/tfm/api_ns/platform/ext/driver/Driver_USART.h @@ -0,0 +1,341 @@ +/* + * Copyright (c) 2013-2017 ARM Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + * $Date: 2. Feb 2017 + * $Revision: V2.3 + * + * Project: USART (Universal Synchronous Asynchronous Receiver Transmitter) + * Driver definitions + */ + +/* History: + * Version 2.3 + * ARM_USART_STATUS and ARM_USART_MODEM_STATUS made volatile + * Version 2.2 + * Corrected ARM_USART_CPOL_Pos and ARM_USART_CPHA_Pos definitions + * Version 2.1 + * Removed optional argument parameter from Signal Event + * Version 2.0 + * New simplified driver: + * complexity moved to upper layer (especially data handling) + * more unified API for different communication interfaces + * renamed driver UART -> USART (Asynchronous & Synchronous) + * Added modes: + * Synchronous + * Single-wire + * IrDA + * Smart Card + * Changed prefix ARM_DRV -> ARM_DRIVER + * Version 1.10 + * Namespace prefix ARM_ added + * Version 1.01 + * Added events: + * ARM_UART_EVENT_TX_EMPTY, ARM_UART_EVENT_RX_TIMEOUT + * ARM_UART_EVENT_TX_THRESHOLD, ARM_UART_EVENT_RX_THRESHOLD + * Added functions: SetTxThreshold, SetRxThreshold + * Added "rx_timeout_event" to capabilities + * Version 1.00 + * Initial release + */ + +#ifndef DRIVER_USART_H_ +#define DRIVER_USART_H_ + +#ifdef __cplusplus +extern "C" +{ +#endif + +#include "Driver_Common.h" + +#define ARM_USART_API_VERSION ARM_DRIVER_VERSION_MAJOR_MINOR(2,3) /* API version */ + + +/****** USART Control Codes *****/ + +#define ARM_USART_CONTROL_Pos 0 +#define ARM_USART_CONTROL_Msk (0xFFUL << ARM_USART_CONTROL_Pos) + +/*----- USART Control Codes: Mode -----*/ +#define ARM_USART_MODE_ASYNCHRONOUS (0x01UL << ARM_USART_CONTROL_Pos) ///< UART (Asynchronous); arg = Baudrate +#define ARM_USART_MODE_SYNCHRONOUS_MASTER (0x02UL << ARM_USART_CONTROL_Pos) ///< Synchronous Master (generates clock signal); arg = Baudrate +#define ARM_USART_MODE_SYNCHRONOUS_SLAVE (0x03UL << ARM_USART_CONTROL_Pos) ///< Synchronous Slave (external clock signal) +#define ARM_USART_MODE_SINGLE_WIRE (0x04UL << ARM_USART_CONTROL_Pos) ///< UART Single-wire (half-duplex); arg = Baudrate +#define ARM_USART_MODE_IRDA (0x05UL << ARM_USART_CONTROL_Pos) ///< UART IrDA; arg = Baudrate +#define ARM_USART_MODE_SMART_CARD (0x06UL << ARM_USART_CONTROL_Pos) ///< UART Smart Card; arg = Baudrate + +/*----- USART Control Codes: Mode Parameters: Data Bits -----*/ +#define ARM_USART_DATA_BITS_Pos 8 +#define ARM_USART_DATA_BITS_Msk (7UL << ARM_USART_DATA_BITS_Pos) +#define ARM_USART_DATA_BITS_5 (5UL << ARM_USART_DATA_BITS_Pos) ///< 5 Data bits +#define ARM_USART_DATA_BITS_6 (6UL << ARM_USART_DATA_BITS_Pos) ///< 6 Data bit +#define ARM_USART_DATA_BITS_7 (7UL << ARM_USART_DATA_BITS_Pos) ///< 7 Data bits +#define ARM_USART_DATA_BITS_8 (0UL << ARM_USART_DATA_BITS_Pos) ///< 8 Data bits (default) +#define ARM_USART_DATA_BITS_9 (1UL << ARM_USART_DATA_BITS_Pos) ///< 9 Data bits + +/*----- USART Control Codes: Mode Parameters: Parity -----*/ +#define ARM_USART_PARITY_Pos 12 +#define ARM_USART_PARITY_Msk (3UL << ARM_USART_PARITY_Pos) +#define ARM_USART_PARITY_NONE (0UL << ARM_USART_PARITY_Pos) ///< No Parity (default) +#define ARM_USART_PARITY_EVEN (1UL << ARM_USART_PARITY_Pos) ///< Even Parity +#define ARM_USART_PARITY_ODD (2UL << ARM_USART_PARITY_Pos) ///< Odd Parity + +/*----- USART Control Codes: Mode Parameters: Stop Bits -----*/ +#define ARM_USART_STOP_BITS_Pos 14 +#define ARM_USART_STOP_BITS_Msk (3UL << ARM_USART_STOP_BITS_Pos) +#define ARM_USART_STOP_BITS_1 (0UL << ARM_USART_STOP_BITS_Pos) ///< 1 Stop bit (default) +#define ARM_USART_STOP_BITS_2 (1UL << ARM_USART_STOP_BITS_Pos) ///< 2 Stop bits +#define ARM_USART_STOP_BITS_1_5 (2UL << ARM_USART_STOP_BITS_Pos) ///< 1.5 Stop bits +#define ARM_USART_STOP_BITS_0_5 (3UL << ARM_USART_STOP_BITS_Pos) ///< 0.5 Stop bits + +/*----- USART Control Codes: Mode Parameters: Flow Control -----*/ +#define ARM_USART_FLOW_CONTROL_Pos 16 +#define ARM_USART_FLOW_CONTROL_Msk (3UL << ARM_USART_FLOW_CONTROL_Pos) +#define ARM_USART_FLOW_CONTROL_NONE (0UL << ARM_USART_FLOW_CONTROL_Pos) ///< No Flow Control (default) +#define ARM_USART_FLOW_CONTROL_RTS (1UL << ARM_USART_FLOW_CONTROL_Pos) ///< RTS Flow Control +#define ARM_USART_FLOW_CONTROL_CTS (2UL << ARM_USART_FLOW_CONTROL_Pos) ///< CTS Flow Control +#define ARM_USART_FLOW_CONTROL_RTS_CTS (3UL << ARM_USART_FLOW_CONTROL_Pos) ///< RTS/CTS Flow Control + +/*----- USART Control Codes: Mode Parameters: Clock Polarity (Synchronous mode) -----*/ +#define ARM_USART_CPOL_Pos 18 +#define ARM_USART_CPOL_Msk (1UL << ARM_USART_CPOL_Pos) +#define ARM_USART_CPOL0 (0UL << ARM_USART_CPOL_Pos) ///< CPOL = 0 (default) +#define ARM_USART_CPOL1 (1UL << ARM_USART_CPOL_Pos) ///< CPOL = 1 + +/*----- USART Control Codes: Mode Parameters: Clock Phase (Synchronous mode) -----*/ +#define ARM_USART_CPHA_Pos 19 +#define ARM_USART_CPHA_Msk (1UL << ARM_USART_CPHA_Pos) +#define ARM_USART_CPHA0 (0UL << ARM_USART_CPHA_Pos) ///< CPHA = 0 (default) +#define ARM_USART_CPHA1 (1UL << ARM_USART_CPHA_Pos) ///< CPHA = 1 + + +/*----- USART Control Codes: Miscellaneous Controls -----*/ +#define ARM_USART_SET_DEFAULT_TX_VALUE (0x10UL << ARM_USART_CONTROL_Pos) ///< Set default Transmit value (Synchronous Receive only); arg = value +#define ARM_USART_SET_IRDA_PULSE (0x11UL << ARM_USART_CONTROL_Pos) ///< Set IrDA Pulse in ns; arg: 0=3/16 of bit period +#define ARM_USART_SET_SMART_CARD_GUARD_TIME (0x12UL << ARM_USART_CONTROL_Pos) ///< Set Smart Card Guard Time; arg = number of bit periods +#define ARM_USART_SET_SMART_CARD_CLOCK (0x13UL << ARM_USART_CONTROL_Pos) ///< Set Smart Card Clock in Hz; arg: 0=Clock not generated +#define ARM_USART_CONTROL_SMART_CARD_NACK (0x14UL << ARM_USART_CONTROL_Pos) ///< Smart Card NACK generation; arg: 0=disabled, 1=enabled +#define ARM_USART_CONTROL_TX (0x15UL << ARM_USART_CONTROL_Pos) ///< Transmitter; arg: 0=disabled, 1=enabled +#define ARM_USART_CONTROL_RX (0x16UL << ARM_USART_CONTROL_Pos) ///< Receiver; arg: 0=disabled, 1=enabled +#define ARM_USART_CONTROL_BREAK (0x17UL << ARM_USART_CONTROL_Pos) ///< Continuous Break transmission; arg: 0=disabled, 1=enabled +#define ARM_USART_ABORT_SEND (0x18UL << ARM_USART_CONTROL_Pos) ///< Abort \ref ARM_USART_Send +#define ARM_USART_ABORT_RECEIVE (0x19UL << ARM_USART_CONTROL_Pos) ///< Abort \ref ARM_USART_Receive +#define ARM_USART_ABORT_TRANSFER (0x1AUL << ARM_USART_CONTROL_Pos) ///< Abort \ref ARM_USART_Transfer + + + +/****** USART specific error codes *****/ +#define ARM_USART_ERROR_MODE (ARM_DRIVER_ERROR_SPECIFIC - 1) ///< Specified Mode not supported +#define ARM_USART_ERROR_BAUDRATE (ARM_DRIVER_ERROR_SPECIFIC - 2) ///< Specified baudrate not supported +#define ARM_USART_ERROR_DATA_BITS (ARM_DRIVER_ERROR_SPECIFIC - 3) ///< Specified number of Data bits not supported +#define ARM_USART_ERROR_PARITY (ARM_DRIVER_ERROR_SPECIFIC - 4) ///< Specified Parity not supported +#define ARM_USART_ERROR_STOP_BITS (ARM_DRIVER_ERROR_SPECIFIC - 5) ///< Specified number of Stop bits not supported +#define ARM_USART_ERROR_FLOW_CONTROL (ARM_DRIVER_ERROR_SPECIFIC - 6) ///< Specified Flow Control not supported +#define ARM_USART_ERROR_CPOL (ARM_DRIVER_ERROR_SPECIFIC - 7) ///< Specified Clock Polarity not supported +#define ARM_USART_ERROR_CPHA (ARM_DRIVER_ERROR_SPECIFIC - 8) ///< Specified Clock Phase not supported + + +/** +\brief USART Status +*/ +typedef volatile struct _ARM_USART_STATUS { + uint32_t tx_busy : 1; ///< Transmitter busy flag + uint32_t rx_busy : 1; ///< Receiver busy flag + uint32_t tx_underflow : 1; ///< Transmit data underflow detected (cleared on start of next send operation) + uint32_t rx_overflow : 1; ///< Receive data overflow detected (cleared on start of next receive operation) + uint32_t rx_break : 1; ///< Break detected on receive (cleared on start of next receive operation) + uint32_t rx_framing_error : 1; ///< Framing error detected on receive (cleared on start of next receive operation) + uint32_t rx_parity_error : 1; ///< Parity error detected on receive (cleared on start of next receive operation) + uint32_t reserved : 25; +} ARM_USART_STATUS; + +/** +\brief USART Modem Control +*/ +typedef enum _ARM_USART_MODEM_CONTROL { + ARM_USART_RTS_CLEAR, ///< Deactivate RTS + ARM_USART_RTS_SET, ///< Activate RTS + ARM_USART_DTR_CLEAR, ///< Deactivate DTR + ARM_USART_DTR_SET ///< Activate DTR +} ARM_USART_MODEM_CONTROL; + +/** +\brief USART Modem Status +*/ +typedef volatile struct _ARM_USART_MODEM_STATUS { + uint32_t cts : 1; ///< CTS state: 1=Active, 0=Inactive + uint32_t dsr : 1; ///< DSR state: 1=Active, 0=Inactive + uint32_t dcd : 1; ///< DCD state: 1=Active, 0=Inactive + uint32_t ri : 1; ///< RI state: 1=Active, 0=Inactive + uint32_t reserved : 28; +} ARM_USART_MODEM_STATUS; + + +/****** USART Event *****/ +#define ARM_USART_EVENT_SEND_COMPLETE (1UL << 0) ///< Send completed; however USART may still transmit data +#define ARM_USART_EVENT_RECEIVE_COMPLETE (1UL << 1) ///< Receive completed +#define ARM_USART_EVENT_TRANSFER_COMPLETE (1UL << 2) ///< Transfer completed +#define ARM_USART_EVENT_TX_COMPLETE (1UL << 3) ///< Transmit completed (optional) +#define ARM_USART_EVENT_TX_UNDERFLOW (1UL << 4) ///< Transmit data not available (Synchronous Slave) +#define ARM_USART_EVENT_RX_OVERFLOW (1UL << 5) ///< Receive data overflow +#define ARM_USART_EVENT_RX_TIMEOUT (1UL << 6) ///< Receive character timeout (optional) +#define ARM_USART_EVENT_RX_BREAK (1UL << 7) ///< Break detected on receive +#define ARM_USART_EVENT_RX_FRAMING_ERROR (1UL << 8) ///< Framing error detected on receive +#define ARM_USART_EVENT_RX_PARITY_ERROR (1UL << 9) ///< Parity error detected on receive +#define ARM_USART_EVENT_CTS (1UL << 10) ///< CTS state changed (optional) +#define ARM_USART_EVENT_DSR (1UL << 11) ///< DSR state changed (optional) +#define ARM_USART_EVENT_DCD (1UL << 12) ///< DCD state changed (optional) +#define ARM_USART_EVENT_RI (1UL << 13) ///< RI state changed (optional) + + +// Function documentation +/** + \fn ARM_DRIVER_VERSION ARM_USART_GetVersion (void) + \brief Get driver version. + \return \ref ARM_DRIVER_VERSION + + \fn ARM_USART_CAPABILITIES ARM_USART_GetCapabilities (void) + \brief Get driver capabilities + \return \ref ARM_USART_CAPABILITIES + + \fn int32_t ARM_USART_Initialize (ARM_USART_SignalEvent_t cb_event) + \brief Initialize USART Interface. + \param[in] cb_event Pointer to \ref ARM_USART_SignalEvent + \return \ref execution_status + + \fn int32_t ARM_USART_Uninitialize (void) + \brief De-initialize USART Interface. + \return \ref execution_status + + \fn int32_t ARM_USART_PowerControl (ARM_POWER_STATE state) + \brief Control USART Interface Power. + \param[in] state Power state + \return \ref execution_status + + \fn int32_t ARM_USART_Send (const void *data, uint32_t num) + \brief Start sending data to USART transmitter. + \param[in] data Pointer to buffer with data to send to USART transmitter + \param[in] num Number of data items to send + \return \ref execution_status + + \fn int32_t ARM_USART_Receive (void *data, uint32_t num) + \brief Start receiving data from USART receiver. + \param[out] data Pointer to buffer for data to receive from USART receiver + \param[in] num Number of data items to receive + \return \ref execution_status + + \fn int32_t ARM_USART_Transfer (const void *data_out, + void *data_in, + uint32_t num) + \brief Start sending/receiving data to/from USART transmitter/receiver. + \param[in] data_out Pointer to buffer with data to send to USART transmitter + \param[out] data_in Pointer to buffer for data to receive from USART receiver + \param[in] num Number of data items to transfer + \return \ref execution_status + + \fn uint32_t ARM_USART_GetTxCount (void) + \brief Get transmitted data count. + \return number of data items transmitted + + \fn uint32_t ARM_USART_GetRxCount (void) + \brief Get received data count. + \return number of data items received + + \fn int32_t ARM_USART_Control (uint32_t control, uint32_t arg) + \brief Control USART Interface. + \param[in] control Operation + \param[in] arg Argument of operation (optional) + \return common \ref execution_status and driver specific \ref usart_execution_status + + \fn ARM_USART_STATUS ARM_USART_GetStatus (void) + \brief Get USART status. + \return USART status \ref ARM_USART_STATUS + + \fn int32_t ARM_USART_SetModemControl (ARM_USART_MODEM_CONTROL control) + \brief Set USART Modem Control line state. + \param[in] control \ref ARM_USART_MODEM_CONTROL + \return \ref execution_status + + \fn ARM_USART_MODEM_STATUS ARM_USART_GetModemStatus (void) + \brief Get USART Modem Status lines state. + \return modem status \ref ARM_USART_MODEM_STATUS + + \fn void ARM_USART_SignalEvent (uint32_t event) + \brief Signal USART Events. + \param[in] event \ref USART_events notification mask + \return none +*/ + +typedef void (*ARM_USART_SignalEvent_t) (uint32_t event); ///< Pointer to \ref ARM_USART_SignalEvent : Signal USART Event. + + +/** +\brief USART Device Driver Capabilities. +*/ +typedef struct _ARM_USART_CAPABILITIES { + uint32_t asynchronous : 1; ///< supports UART (Asynchronous) mode + uint32_t synchronous_master : 1; ///< supports Synchronous Master mode + uint32_t synchronous_slave : 1; ///< supports Synchronous Slave mode + uint32_t single_wire : 1; ///< supports UART Single-wire mode + uint32_t irda : 1; ///< supports UART IrDA mode + uint32_t smart_card : 1; ///< supports UART Smart Card mode + uint32_t smart_card_clock : 1; ///< Smart Card Clock generator available + uint32_t flow_control_rts : 1; ///< RTS Flow Control available + uint32_t flow_control_cts : 1; ///< CTS Flow Control available + uint32_t event_tx_complete : 1; ///< Transmit completed event: \ref ARM_USART_EVENT_TX_COMPLETE + uint32_t event_rx_timeout : 1; ///< Signal receive character timeout event: \ref ARM_USART_EVENT_RX_TIMEOUT + uint32_t rts : 1; ///< RTS Line: 0=not available, 1=available + uint32_t cts : 1; ///< CTS Line: 0=not available, 1=available + uint32_t dtr : 1; ///< DTR Line: 0=not available, 1=available + uint32_t dsr : 1; ///< DSR Line: 0=not available, 1=available + uint32_t dcd : 1; ///< DCD Line: 0=not available, 1=available + uint32_t ri : 1; ///< RI Line: 0=not available, 1=available + uint32_t event_cts : 1; ///< Signal CTS change event: \ref ARM_USART_EVENT_CTS + uint32_t event_dsr : 1; ///< Signal DSR change event: \ref ARM_USART_EVENT_DSR + uint32_t event_dcd : 1; ///< Signal DCD change event: \ref ARM_USART_EVENT_DCD + uint32_t event_ri : 1; ///< Signal RI change event: \ref ARM_USART_EVENT_RI + uint32_t reserved : 11; ///< Reserved (must be zero) +} ARM_USART_CAPABILITIES; + + +/** +\brief Access structure of the USART Driver. +*/ +typedef struct _ARM_DRIVER_USART { + ARM_DRIVER_VERSION (*GetVersion) (void); ///< Pointer to \ref ARM_USART_GetVersion : Get driver version. + ARM_USART_CAPABILITIES (*GetCapabilities) (void); ///< Pointer to \ref ARM_USART_GetCapabilities : Get driver capabilities. + int32_t (*Initialize) (ARM_USART_SignalEvent_t cb_event); ///< Pointer to \ref ARM_USART_Initialize : Initialize USART Interface. + int32_t (*Uninitialize) (void); ///< Pointer to \ref ARM_USART_Uninitialize : De-initialize USART Interface. + int32_t (*PowerControl) (ARM_POWER_STATE state); ///< Pointer to \ref ARM_USART_PowerControl : Control USART Interface Power. + int32_t (*Send) (const void *data, uint32_t num); ///< Pointer to \ref ARM_USART_Send : Start sending data to USART transmitter. + int32_t (*Receive) ( void *data, uint32_t num); ///< Pointer to \ref ARM_USART_Receive : Start receiving data from USART receiver. + int32_t (*Transfer) (const void *data_out, + void *data_in, + uint32_t num); ///< Pointer to \ref ARM_USART_Transfer : Start sending/receiving data to/from USART. + uint32_t (*GetTxCount) (void); ///< Pointer to \ref ARM_USART_GetTxCount : Get transmitted data count. + uint32_t (*GetRxCount) (void); ///< Pointer to \ref ARM_USART_GetRxCount : Get received data count. + int32_t (*Control) (uint32_t control, uint32_t arg); ///< Pointer to \ref ARM_USART_Control : Control USART Interface. + ARM_USART_STATUS (*GetStatus) (void); ///< Pointer to \ref ARM_USART_GetStatus : Get USART status. + int32_t (*SetModemControl) (ARM_USART_MODEM_CONTROL control); ///< Pointer to \ref ARM_USART_SetModemControl : Set USART Modem Control line state. + ARM_USART_MODEM_STATUS (*GetModemStatus) (void); ///< Pointer to \ref ARM_USART_GetModemStatus : Get USART Modem Status lines state. +} const ARM_DRIVER_USART; + +#ifdef __cplusplus +} +#endif + +#endif /* DRIVER_USART_H_ */ |