diff options
Diffstat (limited to 'nrfdemo/build/tfm/api_ns/interface')
34 files changed, 15292 insertions, 0 deletions
diff --git a/nrfdemo/build/tfm/api_ns/interface/include/RTE_Device.h b/nrfdemo/build/tfm/api_ns/interface/include/RTE_Device.h new file mode 100644 index 0000000..8dc751d --- /dev/null +++ b/nrfdemo/build/tfm/api_ns/interface/include/RTE_Device.h @@ -0,0 +1,98 @@ +/* + * Copyright (c) 2021 - 2022 Nordic Semiconductor ASA + * + * SPDX-License-Identifier: LicenseRef-Nordic-5-Clause + */ + +#ifndef __RTE_DEVICE_H +#define __RTE_DEVICE_H + +#include <autoconf.h> + +/* ARRAY_SIZE causes a conflict as it is defined both by TF-M and indirectly by devicetree.h */ +#undef ARRAY_SIZE +#include <zephyr/devicetree.h> + +#include <nrf-pinctrl.h> + +#include <nrf.h> + +#define UART_PIN_INIT(node_id, prop, idx) DT_PROP_BY_IDX(node_id, prop, idx), + +#define RTE_USART_PINS(idx) \ + { \ + DT_FOREACH_CHILD_VARGS(DT_PINCTRL_BY_NAME(DT_NODELABEL(uart##idx), default, 0), \ + DT_FOREACH_PROP_ELEM, psels, UART_PIN_INIT) \ + } + +#define RTE_FLASH0 1 + +#if DOMAIN_NS == 1U + +#ifdef NRF_UARTE0_S + +#define RTE_USART0 1 + +#else /* NRF_UARTE0_S - 54L15 devices*/ + +/* Only UART20 and UART30 are supported for TF-M tests, which are the + * Non-secure applications build via the TF-M build system + */ +#if defined(CONFIG_TFM_SECURE_UART30) +#define RTE_USART20 1 +#else +#define RTE_USART30 1 +#endif + +#endif /* NRF_UARTE0_S */ + +#endif /* DOMAIN_NS == 1U */ + +/* + * The defines RTE_USART0, RTE_USART1, etc. determine if + * Driver_USART.c instantiates UART instance 0, 1, etc.. + */ + +#if defined(CONFIG_TFM_SECURE_UART0) +#define RTE_USART0 1 +#endif + +#if defined(CONFIG_TFM_SECURE_UART1) +#define RTE_USART1 1 +#endif + +#if defined(CONFIG_TFM_SECURE_UART00) +#define RTE_USART00 1 +#endif + +#if defined(CONFIG_TFM_SECURE_UART20) +#define RTE_USART20 1 +#endif + +#if defined(CONFIG_TFM_SECURE_UART21) +#define RTE_USART21 1 +#endif + +#if defined(CONFIG_TFM_SECURE_UART22) +#define RTE_USART22 1 +#endif + +#if defined(CONFIG_TFM_SECURE_UART30) +#define RTE_USART30 1 +#endif + +/* + * Note that the defines RTE_USART0_PINS, RTE_USART1_PINS, etc. are + * used by Driver_USART.c, but only when RTE_USART0, RTE_USART1 + * etc. are defined to 1. + */ +#define RTE_USART0_PINS RTE_USART_PINS(0) +#define RTE_USART1_PINS RTE_USART_PINS(1) + +#define RTE_USART00_PINS RTE_USART_PINS(00) +#define RTE_USART20_PINS RTE_USART_PINS(20) +#define RTE_USART21_PINS RTE_USART_PINS(21) +#define RTE_USART22_PINS RTE_USART_PINS(22) +#define RTE_USART30_PINS RTE_USART_PINS(30) + +#endif /* __RTE_DEVICE_H */ diff --git a/nrfdemo/build/tfm/api_ns/interface/include/config_base.h b/nrfdemo/build/tfm/api_ns/interface/include/config_base.h new file mode 100644 index 0000000..62f25b1 --- /dev/null +++ b/nrfdemo/build/tfm/api_ns/interface/include/config_base.h @@ -0,0 +1,271 @@ +/* + * Copyright (c) 2022, Arm Limited. All rights reserved. + * Copyright (c) 2023 Cypress Semiconductor Corporation (an Infineon + * company) or an affiliate of Cypress Semiconductor Corporation. All rights + * reserved. + * + * SPDX-License-Identifier: BSD-3-Clause + * + */ + +#ifndef __CONFIG_BASE_H__ +#define __CONFIG_BASE_H__ + +/* Platform Partition Configs */ + +/* Size of input buffer in platform service */ +#ifndef PLATFORM_SERVICE_INPUT_BUFFER_SIZE +#define PLATFORM_SERVICE_INPUT_BUFFER_SIZE 64 +#endif + +/* Size of output buffer in platform service */ +#ifndef PLATFORM_SERVICE_OUTPUT_BUFFER_SIZE +#define PLATFORM_SERVICE_OUTPUT_BUFFER_SIZE 64 +#endif + +/* The stack size of the Platform Secure Partition */ +#ifndef PLATFORM_SP_STACK_SIZE +#define PLATFORM_SP_STACK_SIZE 0x500 +#endif + +/* Disable Non-volatile counter module */ +#ifndef PLATFORM_NV_COUNTER_MODULE_DISABLED +#define PLATFORM_NV_COUNTER_MODULE_DISABLED 0 +#endif + +/* Crypto Partition Configs */ + +/* + * Heap size for the crypto backend + * CRYPTO_ENGINE_BUF_SIZE needs to be >8KB for EC signing by attest module. + */ +#ifndef CRYPTO_ENGINE_BUF_SIZE +#define CRYPTO_ENGINE_BUF_SIZE 0x2080 +#endif + +/* The max number of concurrent operations that can be active (allocated) at any time in Crypto */ +#ifndef CRYPTO_CONC_OPER_NUM +#define CRYPTO_CONC_OPER_NUM 8 +#endif + +/* Enable PSA Crypto random number generator module */ +#ifndef CRYPTO_RNG_MODULE_ENABLED +#define CRYPTO_RNG_MODULE_ENABLED 1 +#endif + +/* Enable PSA Crypto Key module */ +#ifndef CRYPTO_KEY_MODULE_ENABLED +#define CRYPTO_KEY_MODULE_ENABLED 1 +#endif + +/* Enable PSA Crypto AEAD module */ +#ifndef CRYPTO_AEAD_MODULE_ENABLED +#define CRYPTO_AEAD_MODULE_ENABLED 1 +#endif + +/* Enable PSA Crypto MAC module */ +#ifndef CRYPTO_MAC_MODULE_ENABLED +#define CRYPTO_MAC_MODULE_ENABLED 1 +#endif + +/* Enable PSA Crypto Hash module */ +#ifndef CRYPTO_HASH_MODULE_ENABLED +#define CRYPTO_HASH_MODULE_ENABLED 1 +#endif + +/* Enable PSA Crypto Cipher module */ +#ifndef CRYPTO_CIPHER_MODULE_ENABLED +#define CRYPTO_CIPHER_MODULE_ENABLED 1 +#endif + +/* Enable PSA Crypto asymmetric key signature module */ +#ifndef CRYPTO_ASYM_SIGN_MODULE_ENABLED +#define CRYPTO_ASYM_SIGN_MODULE_ENABLED 1 +#endif + +/* Enable PSA Crypto asymmetric key encryption module */ +#ifndef CRYPTO_ASYM_ENCRYPT_MODULE_ENABLED +#define CRYPTO_ASYM_ENCRYPT_MODULE_ENABLED 1 +#endif + +/* Enable PSA Crypto key derivation module */ +#ifndef CRYPTO_KEY_DERIVATION_MODULE_ENABLED +#define CRYPTO_KEY_DERIVATION_MODULE_ENABLED 1 +#endif + +/* Default size of the internal scratch buffer used for PSA FF IOVec allocations */ +#ifndef CRYPTO_IOVEC_BUFFER_SIZE +#define CRYPTO_IOVEC_BUFFER_SIZE 5120 +#endif + +/* Use stored NV seed to provide entropy */ +#ifndef CRYPTO_NV_SEED +#define CRYPTO_NV_SEED 1 +#endif + +/* + * Only enable multi-part operations in Hash, MAC, AEAD and symmetric ciphers, + * to optimize memory footprint in resource-constrained devices. + */ +#ifndef CRYPTO_SINGLE_PART_FUNCS_DISABLED +#define CRYPTO_SINGLE_PART_FUNCS_DISABLED 0 +#endif + +/* The stack size of the Crypto Secure Partition */ +#ifndef CRYPTO_STACK_SIZE +#define CRYPTO_STACK_SIZE 0x1B00 +#endif + +/* FWU Partition Configs */ + +/* Size of the FWU internal data transfer buffer */ +#ifndef TFM_FWU_BUF_SIZE +#define TFM_FWU_BUF_SIZE PSA_FWU_MAX_WRITE_SIZE +#endif + +/* The stack size of the Firmware Update Secure Partition */ +#ifndef FWU_STACK_SIZE +#define FWU_STACK_SIZE 0x600 +#endif + +/* Attest Partition Configs */ + +/* Include optional claims in initial attestation token */ +#ifndef ATTEST_INCLUDE_OPTIONAL_CLAIMS +#define ATTEST_INCLUDE_OPTIONAL_CLAIMS 1 +#endif + +/* Include COSE key-id in initial attestation token */ +#ifndef ATTEST_INCLUDE_COSE_KEY_ID +#define ATTEST_INCLUDE_COSE_KEY_ID 0 +#endif + +/* The stack size of the Initial Attestation Secure Partition */ +#ifndef ATTEST_STACK_SIZE +#define ATTEST_STACK_SIZE 0x700 +#endif + +/* Set the initial attestation token profile */ +#if (!ATTEST_TOKEN_PROFILE_PSA_IOT_1) && \ + (!ATTEST_TOKEN_PROFILE_PSA_2_0_0) && \ + (!ATTEST_TOKEN_PROFILE_ARM_CCA) +#define ATTEST_TOKEN_PROFILE_PSA_IOT_1 1 +#endif + +/* ITS Partition Configs */ + +/* Create flash FS if it doesn't exist for Internal Trusted Storage partition */ +#ifndef ITS_CREATE_FLASH_LAYOUT +#define ITS_CREATE_FLASH_LAYOUT 1 +#endif + +/* Enable emulated RAM FS for platforms that don't have flash for Internal Trusted Storage partition */ +#ifndef ITS_RAM_FS +#define ITS_RAM_FS 0 +#endif + +/* Validate filesystem metadata every time it is read from flash */ +#ifndef ITS_VALIDATE_METADATA_FROM_FLASH +#define ITS_VALIDATE_METADATA_FROM_FLASH 1 +#endif + +/* The maximum asset size to be stored in the Internal Trusted Storage */ +#ifndef ITS_MAX_ASSET_SIZE +#define ITS_MAX_ASSET_SIZE 512 +#endif + +/* + * Size of the ITS internal data transfer buffer + * (Default to the max asset size so that all requests can be handled in one iteration.) + */ +#ifndef ITS_BUF_SIZE +#define ITS_BUF_SIZE ITS_MAX_ASSET_SIZE +#endif + +/* The maximum number of assets to be stored in the Internal Trusted Storage */ +#ifndef ITS_NUM_ASSETS +#define ITS_NUM_ASSETS 10 +#endif + +/* The stack size of the Internal Trusted Storage Secure Partition */ +#ifndef ITS_STACK_SIZE +#define ITS_STACK_SIZE 0x720 +#endif + +/* The size of the authentication tag used when authentication/encryption of ITS files is enabled */ +#ifndef TFM_ITS_AUTH_TAG_LENGTH +#define TFM_ITS_AUTH_TAG_LENGTH 16 +#endif + +/* The size of the nonce used when ITS file encryption is enabled */ +#ifndef TFM_ITS_ENC_NONCE_LENGTH +#define TFM_ITS_ENC_NONCE_LENGTH 12 +#endif + +/* PS Partition Configs */ + +/* Create flash FS if it doesn't exist for Protected Storage partition */ +#ifndef PS_CREATE_FLASH_LAYOUT +#define PS_CREATE_FLASH_LAYOUT 1 +#endif + +/* Enable emulated RAM FS for platforms that don't have flash for Protected Storage partition */ +#ifndef PS_RAM_FS +#define PS_RAM_FS 0 +#endif + +/* Enable rollback protection for Protected Storage partition */ +#ifndef PS_ROLLBACK_PROTECTION +#define PS_ROLLBACK_PROTECTION 1 +#endif + +/* Validate filesystem metadata every time it is read from flash */ +#ifndef PS_VALIDATE_METADATA_FROM_FLASH +#define PS_VALIDATE_METADATA_FROM_FLASH 1 +#endif + +/* The maximum asset size to be stored in the Protected Storage */ +#ifndef PS_MAX_ASSET_SIZE +#define PS_MAX_ASSET_SIZE 2048 +#endif + +/* The maximum number of assets to be stored in the Protected Storage */ +#ifndef PS_NUM_ASSETS +#define PS_NUM_ASSETS 10 +#endif + +/* The stack size of the Protected Storage Secure Partition */ +#ifndef PS_STACK_SIZE +#define PS_STACK_SIZE 0x700 +#endif + +/* The stack size of the NS Agent Mailbox Secure Partition */ +#ifndef NS_AGENT_MAILBOX_STACK_SIZE +#define NS_AGENT_MAILBOX_STACK_SIZE 0x800 +#endif + +/* SPM Partition Configs */ + +#ifdef CONFIG_TFM_CONNECTION_POOL_ENABLE +/* The maximal number of secure services that are connected or requested at the same time */ +#ifndef CONFIG_TFM_CONN_HANDLE_MAX_NUM +#define CONFIG_TFM_CONN_HANDLE_MAX_NUM 8 +#endif +#endif + +/* Disable the doorbell APIs */ +#ifndef CONFIG_TFM_DOORBELL_API +#define CONFIG_TFM_DOORBELL_API 0 +#endif + +/* Do not run the scheduler after handling a secure interrupt if the NSPE was pre-empted */ +#ifndef CONFIG_TFM_SCHEDULE_WHEN_NS_INTERRUPTED +#define CONFIG_TFM_SCHEDULE_WHEN_NS_INTERRUPTED 0 +#endif + +/* Enable OTP/NV_COUNTERS emulation in RAM */ +#ifndef OTP_NV_COUNTERS_RAM_EMULATION +#define OTP_NV_COUNTERS_RAM_EMULATION 0 +#endif + +#endif /* __CONFIG_BASE_H__ */ diff --git a/nrfdemo/build/tfm/api_ns/interface/include/config_impl.h b/nrfdemo/build/tfm/api_ns/interface/include/config_impl.h new file mode 100644 index 0000000..27b86ea --- /dev/null +++ b/nrfdemo/build/tfm/api_ns/interface/include/config_impl.h @@ -0,0 +1,58 @@ +/* + * Copyright (c) 2021-2022, Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: BSD-3-Clause + * + */ +/*********** WARNING: This is an auto-generated file. Do not edit! ***********/ + +#ifndef __CONFIG_IMPL_H__ +#define __CONFIG_IMPL_H__ + +#include "config_tfm.h" + +/* Backends */ +#define CONFIG_TFM_SPM_BACKEND_IPC 0 +#define CONFIG_TFM_SPM_BACKEND_SFN 1 + +#define CONFIG_TFM_CONNECTION_BASED_SERVICE_API 0 +#define CONFIG_TFM_MMIO_REGION_ENABLE 0 +#define CONFIG_TFM_FLIH_API 0 +#define CONFIG_TFM_SLIH_API 0 + +#if CONFIG_TFM_SPM_BACKEND_IPC == 1 +/* Trustzone NS agent working stack size. */ +#if defined(TFM_FIH_PROFILE_ON) && TFM_ISOLATION_LEVEL == 1 +#define CONFIG_TFM_NS_AGENT_TZ_STACK_SIZE 1256 +#else +#define CONFIG_TFM_NS_AGENT_TZ_STACK_SIZE 1024 +#endif + +/* SPM re-uses Trustzone NS agent stack. */ +#define CONFIG_TFM_SPM_THREAD_STACK_SIZE \ + CONFIG_TFM_NS_AGENT_TZ_STACK_SIZE + +#elif CONFIG_TFM_SPM_BACKEND_SFN == 1 +/* + * In isolation level 1 SFN model, all subsequent components work on NS agent + * stack. It is observed that half of the sum of all partition stack sizes is + * enough for working. Define a divisor factor + * CONFIG_TFM_NS_AGENT_TZ_STK_SIZE_SHIFT_FACTOR for reference, and allow + * modification of the factor based on application situation. The stack size + * value is aligned to 8 bytes. + * The minimum value is 0x400 to satisfy the SPM functional requirement. + * Manifest tool will assure this. + */ +#define CONFIG_TFM_TOTAL_STACK_SIZE (0 + CRYPTO_STACK_SIZE + PLATFORM_SP_STACK_SIZE) +#if (CONFIG_TFM_TOTAL_STACK_SIZE < 2048) +#undef CONFIG_TFM_TOTAL_STACK_SIZE +#define CONFIG_TFM_TOTAL_STACK_SIZE 2048 +#endif + +#define CONFIG_TFM_NS_AGENT_TZ_STK_SIZE_SHIFT_FACTOR 1 +#define CONFIG_TFM_NS_AGENT_TZ_STACK_SIZE \ + (((CONFIG_TFM_TOTAL_STACK_SIZE >> CONFIG_TFM_NS_AGENT_TZ_STK_SIZE_SHIFT_FACTOR) + 0x7) & (~0x7)) + +#endif /* CONFIG_TFM_SPM_BACKEND_IPC == 1 */ + +#endif /* __CONFIG_IMPL_H__ */ diff --git a/nrfdemo/build/tfm/api_ns/interface/include/config_tfm.h b/nrfdemo/build/tfm/api_ns/interface/include/config_tfm.h new file mode 100644 index 0000000..392069b --- /dev/null +++ b/nrfdemo/build/tfm/api_ns/interface/include/config_tfm.h @@ -0,0 +1,33 @@ +/* + * Copyright (c) 2022-2023, Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: BSD-3-Clause + * + */ + +#ifndef __CONFIG_TFM_H__ +#define __CONFIG_TFM_H__ + +#ifdef __cplusplus +extern "C" { +#endif + +/* + * Platform defined header file for TF-M configs. + * Path: ${TARGET_PLATFORM_PATH}/config_tfm_target.h + */ +#ifdef TARGET_CONFIG_HEADER_FILE +#include TARGET_CONFIG_HEADER_FILE +#endif + +#ifdef PROJECT_CONFIG_HEADER_FILE +#include PROJECT_CONFIG_HEADER_FILE +#endif + +#include "config_base.h" + +#ifdef __cplusplus +} +#endif + +#endif /* __CONFIG_TFM_H__ */ diff --git a/nrfdemo/build/tfm/api_ns/interface/include/device_cfg.h b/nrfdemo/build/tfm/api_ns/interface/include/device_cfg.h new file mode 100644 index 0000000..ef2bfba --- /dev/null +++ b/nrfdemo/build/tfm/api_ns/interface/include/device_cfg.h @@ -0,0 +1,55 @@ +/* + * Copyright (c) 2022 Nordic Semiconductor ASA + * + * SPDX-License-Identifier: LicenseRef-Nordic-5-Clause + */ + +#ifndef DEVICE_CFG_H__ +#define DEVICE_CFG_H__ + +#include <autoconf.h> + +/* ARRAY_SIZE causes a conflict as it is defined both by TF-M and indirectly by devicetree.h */ +#undef ARRAY_SIZE +#include <zephyr/devicetree.h> + +#if !defined(NRF54L15_ENGA_XXAA) +#if defined(CONFIG_TFM_SECURE_UART0) || DOMAIN_NS == 1U +#define TFM_UART uart0 +#endif /* defined(CONFIG_TFM_SECURE_UART0) || DOMAIN_NS == 1U */ + +#if defined(CONFIG_TFM_SECURE_UART1) && DOMAIN_NS != 1U +#define TFM_UART uart1 +#endif /* defined(CONFIG_TFM_SECURE_UART1) */ + +#else /* NRF54L15_ENGA_XXAA */ +#if defined(CONFIG_TFM_SECURE_UART00) && DOMAIN_NS != 1U +#define TFM_UART uart00 +#endif /* defined(CONFIG_TFM_SECURE_UART00) */ + +#if defined(CONFIG_TFM_SECURE_UART20) && DOMAIN_NS != 1U +#define TFM_UART uart20 +#endif /* defined(CONFIG_TFM_SECURE_UART20) */ + +#if defined(CONFIG_TFM_SECURE_UART21) && DOMAIN_NS != 1U +#define TFM_UART uart21 +#endif /* defined(CONFIG_TFM_SECURE_UART21) */ + +#if defined(CONFIG_TFM_SECURE_UART22) && DOMAIN_NS != 1U +#define TFM_UART uart22 +#endif /* defined(CONFIG_TFM_SECURE_UART22) */ + +#if defined(CONFIG_TFM_SECURE_UART30) && DOMAIN_NS != 1U +#define TFM_UART uart30 +#endif /* defined(CONFIG_TFM_SECURE_UART30) */ +#endif /* NRF54L15_ENGA_XXAA */ + +#define DEFAULT_UART_BAUDRATE DT_PROP_OR(DT_NODELABEL(TFM_UART), current_speed, 115200) + +#if DT_PROP(DT_NODELABEL(TFM_UART), hw_flow_control) +#define DEFAULT_UART_CONTROL ARM_USART_FLOW_CONTROL_RTS_CTS +#else +#define DEFAULT_UART_CONTROL 0 +#endif + +#endif /* DEVICE_CFG_H__ */ diff --git a/nrfdemo/build/tfm/api_ns/interface/include/os_wrapper/common.h b/nrfdemo/build/tfm/api_ns/interface/include/os_wrapper/common.h new file mode 100644 index 0000000..6494723 --- /dev/null +++ b/nrfdemo/build/tfm/api_ns/interface/include/os_wrapper/common.h @@ -0,0 +1,26 @@ +/* + * Copyright (c) 2017-2019, Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: BSD-3-Clause + * + */ + +#ifndef __OS_WRAPPER_COMMON_H__ +#define __OS_WRAPPER_COMMON_H__ + +#ifdef __cplusplus +extern "C" { +#endif + +#include <stdint.h> + +#define OS_WRAPPER_SUCCESS (0x0) +#define OS_WRAPPER_ERROR (0xFFFFFFFFU) +#define OS_WRAPPER_WAIT_FOREVER (0xFFFFFFFFU) +#define OS_WRAPPER_DEFAULT_STACK_SIZE (-1) + +#ifdef __cplusplus +} +#endif + +#endif /* __OS_WRAPPER_COMMON_H__ */ diff --git a/nrfdemo/build/tfm/api_ns/interface/include/os_wrapper/mutex.h b/nrfdemo/build/tfm/api_ns/interface/include/os_wrapper/mutex.h new file mode 100644 index 0000000..ffdf92c --- /dev/null +++ b/nrfdemo/build/tfm/api_ns/interface/include/os_wrapper/mutex.h @@ -0,0 +1,65 @@ +/* + * Copyright (c) 2017-2019, Arm Limited. All rights reserved. + * Copyright (c) 2023 Cypress Semiconductor Corporation (an Infineon company) + * or an affiliate of Cypress Semiconductor Corporation. All rights reserved. + * + * SPDX-License-Identifier: BSD-3-Clause + * + */ + +#ifndef __OS_WRAPPER_MUTEX_H__ +#define __OS_WRAPPER_MUTEX_H__ + +#ifdef __cplusplus +extern "C" { +#endif + +#include "os_wrapper/common.h" + +/** + * \brief Creates a mutex for mutual exclusion of resources + * + * \return The handle of the created mutex on success or NULL on error + */ +void *os_wrapper_mutex_create(void); + +/** + * \brief Acquires a mutex that is created by \ref os_wrapper_mutex_create() + * + * \param[in] handle The handle of the mutex to acquire. Should be one of the + * handles returned by \ref os_wrapper_mutex_create() + * \param[in] timeout The maximum amount of time(in tick periods) for the + * thread to wait for the mutex to be available. + * If timeout is zero, the function will return immediately. + * Setting timeout to \ref OS_WRAPPER_WAIT_FOREVER will + * cause the thread to wait indefinitely + * + * \return \ref OS_WRAPPER_SUCCESS on success or \ref OS_WRAPPER_ERROR on error + * or timeout + */ +uint32_t os_wrapper_mutex_acquire(void *handle, uint32_t timeout); + +/** + * \brief Releases the mutex acquired previously + * + + * \param[in] handle The handle of the mutex that has been acquired + * + * \return \ref OS_WRAPPER_SUCCESS on success or \ref OS_WRAPPER_ERROR on error + */ +uint32_t os_wrapper_mutex_release(void *handle); + +/** + * \brief Deletes a mutex that is created by \ref os_wrapper_mutex_create() + * + * \param[in] handle The handle of the mutex to be deleted + * + * \return \ref OS_WRAPPER_SUCCESS on success or \ref OS_WRAPPER_ERROR on error + */ +uint32_t os_wrapper_mutex_delete(void *handle); + +#ifdef __cplusplus +} +#endif + +#endif /* __OS_WRAPPER_MUTEX_H__ */ diff --git a/nrfdemo/build/tfm/api_ns/interface/include/psa/client.h b/nrfdemo/build/tfm/api_ns/interface/include/psa/client.h new file mode 100644 index 0000000..b4e8b09 --- /dev/null +++ b/nrfdemo/build/tfm/api_ns/interface/include/psa/client.h @@ -0,0 +1,197 @@ +/* + * Copyright (c) 2018-2021, Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: BSD-3-Clause + * + */ + +#ifndef __PSA_CLIENT_H__ +#define __PSA_CLIENT_H__ + +#include <stddef.h> +#include <stdint.h> + +#include "psa/error.h" + +#ifdef __cplusplus +extern "C" { +#endif + +#ifndef IOVEC_LEN +#define IOVEC_LEN(arr) ((uint32_t)(sizeof(arr)/sizeof(arr[0]))) +#endif + +/*********************** PSA Client Macros and Types *************************/ + +/** + * The version of the PSA Framework API that is being used to build the calling + * firmware. Only part of features of FF-M v1.1 have been implemented. FF-M v1.1 + * is compatible with v1.0. + */ +#define PSA_FRAMEWORK_VERSION (0x0101u) + +/** + * Return value from psa_version() if the requested RoT Service is not present + * in the system. + */ +#define PSA_VERSION_NONE (0u) + +/** + * The zero-value null handle can be assigned to variables used in clients and + * RoT Services, indicating that there is no current connection or message. + */ +#define PSA_NULL_HANDLE ((psa_handle_t)0) + +/** + * Tests whether a handle value returned by psa_connect() is valid. + */ +#define PSA_HANDLE_IS_VALID(handle) ((psa_handle_t)(handle) > 0) + +/** + * Converts the handle value returned from a failed call psa_connect() into + * an error code. + */ +#define PSA_HANDLE_TO_ERROR(handle) ((psa_status_t)(handle)) + +/** + * Maximum number of input and output vectors for a request to psa_call(). + */ +#define PSA_MAX_IOVEC (4u) + + +/** + * The minimum and maximum value in THIS implementation that can be passed + * as the type parameter in a call to psa_call(). + */ + +#define PSA_CALL_TYPE_MIN (0) +#define PSA_CALL_TYPE_MAX (INT16_MAX) + +/** + * An IPC message type that indicates a generic client request. + */ +#define PSA_IPC_CALL (0) + +typedef int32_t psa_handle_t; + +/** + * A read-only input memory region provided to an RoT Service. + */ +typedef struct psa_invec { + const void *base; /*!< the start address of the memory buffer */ + size_t len; /*!< the size in bytes */ +} psa_invec; + +/** + * A writable output memory region provided to an RoT Service. + */ +typedef struct psa_outvec { + void *base; /*!< the start address of the memory buffer */ + size_t len; /*!< the size in bytes */ +} psa_outvec; + +/*************************** PSA Client API **********************************/ + +/** + * \brief Retrieve the version of the PSA Framework API that is implemented. + * + * \return version The version of the PSA Framework implementation + * that is providing the runtime services to the + * caller. The major and minor version are encoded + * as follows: + * \arg version[15:8] -- major version number. + * \arg version[7:0] -- minor version number. + */ +uint32_t psa_framework_version(void); + +/** + * \brief Retrieve the version of an RoT Service or indicate that it is not + * present on this system. + * + * \param[in] sid ID of the RoT Service to query. + * + * \retval PSA_VERSION_NONE The RoT Service is not implemented, or the + * caller is not permitted to access the service. + * \retval > 0 The version of the implemented RoT Service. + */ +uint32_t psa_version(uint32_t sid); + +/** + * \brief Connect to an RoT Service by its SID. + * + * \param[in] sid ID of the RoT Service to connect to. + * \param[in] version Requested version of the RoT Service. + * + * \retval > 0 A handle for the connection. + * \retval PSA_ERROR_CONNECTION_REFUSED The SPM or RoT Service has refused the + * connection. + * \retval PSA_ERROR_CONNECTION_BUSY The SPM or RoT Service cannot make the + * connection at the moment. + * \retval "PROGRAMMER ERROR" The call is a PROGRAMMER ERROR if one or more + * of the following are true: + * \arg The RoT Service ID is not present. + * \arg The RoT Service version is not supported. + * \arg The caller is not allowed to access the RoT + * service. + */ +psa_handle_t psa_connect(uint32_t sid, uint32_t version); + +/** + * \brief Call an RoT Service on an established connection. + * + * \note FF-M 1.0 proposes 6 parameters for psa_call but the secure gateway ABI + * support at most 4 parameters. TF-M chooses to encode 'in_len', + * 'out_len', and 'type' into a 32-bit integer to improve efficiency. + * Compared with struct-based encoding, this method saves extra memory + * check and memory copy operation. The disadvantage is that the 'type' + * range has to be reduced into a 16-bit integer. So with this encoding, + * the valid range for 'type' is 0-32767. + * + * \param[in] handle A handle to an established connection. + * \param[in] type The request type. + * Must be zero( \ref PSA_IPC_CALL) or positive. + * \param[in] in_vec Array of input \ref psa_invec structures. + * \param[in] in_len Number of input \ref psa_invec structures. + * \param[in,out] out_vec Array of output \ref psa_outvec structures. + * \param[in] out_len Number of output \ref psa_outvec structures. + * + * \retval >=0 RoT Service-specific status value. + * \retval <0 RoT Service-specific error code. + * \retval PSA_ERROR_PROGRAMMER_ERROR The connection has been terminated by the + * RoT Service. The call is a PROGRAMMER ERROR if + * one or more of the following are true: + * \arg An invalid handle was passed. + * \arg The connection is already handling a request. + * \arg type < 0. + * \arg An invalid memory reference was provided. + * \arg in_len + out_len > PSA_MAX_IOVEC. + * \arg The message is unrecognized by the RoT + * Service or incorrectly formatted. + */ +psa_status_t psa_call(psa_handle_t handle, int32_t type, + const psa_invec *in_vec, + size_t in_len, + psa_outvec *out_vec, + size_t out_len); + +/** + * \brief Close a connection to an RoT Service. + * + * \param[in] handle A handle to an established connection, or the + * null handle. + * + * \retval void Success. + * \retval "PROGRAMMER ERROR" The call is a PROGRAMMER ERROR if one or more + * of the following are true: + * \arg An invalid handle was provided that is not + * the null handle. + * \arg The connection is currently handling a + * request. + */ +void psa_close(psa_handle_t handle); + +#ifdef __cplusplus +} +#endif + +#endif /* __PSA_CLIENT_H__ */ diff --git a/nrfdemo/build/tfm/api_ns/interface/include/psa/crypto.h b/nrfdemo/build/tfm/api_ns/interface/include/psa/crypto.h new file mode 100644 index 0000000..10480fa --- /dev/null +++ b/nrfdemo/build/tfm/api_ns/interface/include/psa/crypto.h @@ -0,0 +1,4698 @@ +/* + * Copyright (c) 2018-2023, Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: BSD-3-Clause + * + */ +/** + * \file psa/crypto.h + * \brief Platform Security Architecture cryptography module + */ + +#ifndef PSA_CRYPTO_H +#define PSA_CRYPTO_H + +/* In Mbed TLS, we would query the current config through inclusion of + * mbedtls/build_info.h, but in TF-M, we don't rely on build_info.h + * hence we just include the current configuration if it has been passed + * through command line. These config defines are required in crypto_sizes.h + * to compute macros that define sizes which depend on algorithms supported + * by the implementation + */ +#if defined(MBEDTLS_PSA_CRYPTO_CONFIG_FILE) +#include MBEDTLS_PSA_CRYPTO_CONFIG_FILE +#endif /* MBEDTLS_PSA_CRYPTO_CONFIG_FILE */ + +#if defined(MBEDTLS_PSA_CRYPTO_PLATFORM_FILE) +#include MBEDTLS_PSA_CRYPTO_PLATFORM_FILE +#else +#include "crypto_platform.h" +#endif + +#include <stddef.h> + +#ifdef __DOXYGEN_ONLY__ +/* This __DOXYGEN_ONLY__ block contains mock definitions for things that + * must be defined in the crypto_platform.h header. These mock definitions + * are present in this file as a convenience to generate pretty-printed + * documentation that includes those definitions. */ + +/** \defgroup platform Implementation-specific definitions + * @{ + */ + +/**@}*/ +#endif /* __DOXYGEN_ONLY__ */ + +#ifdef __cplusplus +extern "C" { +#endif + +/* The file "crypto_types.h" declares types that encode errors, + * algorithms, key types, policies, etc. */ +#include "crypto_types.h" + +/** \defgroup version API version + * @{ + */ + +/** + * The major version of this implementation of the PSA Crypto API + */ +#define PSA_CRYPTO_API_VERSION_MAJOR 1 + +/** + * The minor version of this implementation of the PSA Crypto API + */ +#define PSA_CRYPTO_API_VERSION_MINOR 0 + +/**@}*/ + +/* The file "crypto_values.h" declares macros to build and analyze values + * of integral types defined in "crypto_types.h". */ +#include "crypto_values.h" + +/** \defgroup initialization Library initialization + * @{ + */ + +/** + * \brief Library initialization. + * + * Applications must call this function before calling any other + * function in this module. + * + * Applications may call this function more than once. Once a call + * succeeds, subsequent calls are guaranteed to succeed. + * + * If the application calls other functions before calling psa_crypto_init(), + * the behavior is undefined. Implementations are encouraged to either perform + * the operation as if the library had been initialized or to return + * #PSA_ERROR_BAD_STATE or some other applicable error. In particular, + * implementations should not return a success status if the lack of + * initialization may have security implications, for example due to improper + * seeding of the random number generator. + * + * \retval #PSA_SUCCESS \emptydescription + * \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription + * \retval #PSA_ERROR_INSUFFICIENT_STORAGE \emptydescription + * \retval #PSA_ERROR_COMMUNICATION_FAILURE \emptydescription + * \retval #PSA_ERROR_HARDWARE_FAILURE \emptydescription + * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription + * \retval #PSA_ERROR_INSUFFICIENT_ENTROPY \emptydescription + * \retval #PSA_ERROR_STORAGE_FAILURE \emptydescription + * \retval #PSA_ERROR_DATA_INVALID \emptydescription + * \retval #PSA_ERROR_DATA_CORRUPT \emptydescription + */ +psa_status_t psa_crypto_init(void); + +/**@}*/ + +/** \addtogroup attributes + * @{ + */ + +/** \def PSA_KEY_ATTRIBUTES_INIT + * + * This macro returns a suitable initializer for a key attribute structure + * of type #psa_key_attributes_t. + */ + +/** Return an initial value for a key attributes structure. + */ +static psa_key_attributes_t psa_key_attributes_init(void); + +/** Declare a key as persistent and set its key identifier. + * + * If the attribute structure currently declares the key as volatile (which + * is the default content of an attribute structure), this function sets + * the lifetime attribute to #PSA_KEY_LIFETIME_PERSISTENT. + * + * This function does not access storage, it merely stores the given + * value in the structure. + * The persistent key will be written to storage when the attribute + * structure is passed to a key creation function such as + * psa_import_key(), psa_generate_key(), + * psa_key_derivation_output_key() or psa_copy_key(). + * + * This function may be declared as `static` (i.e. without external + * linkage). This function may be provided as a function-like macro, + * but in this case it must evaluate each of its arguments exactly once. + * + * \param[out] attributes The attribute structure to write to. + * \param key The persistent identifier for the key. + */ +static void psa_set_key_id(psa_key_attributes_t *attributes, + mbedtls_svc_key_id_t key); + +#ifdef MBEDTLS_PSA_CRYPTO_KEY_ID_ENCODES_OWNER +/** Set the owner identifier of a key. + * + * When key identifiers encode key owner identifiers, psa_set_key_id() does + * not allow to define in key attributes the owner of volatile keys as + * psa_set_key_id() enforces the key to be persistent. + * + * This function allows to set in key attributes the owner identifier of a + * key. It is intended to be used for volatile keys. For persistent keys, + * it is recommended to use the PSA Cryptography API psa_set_key_id() to define + * the owner of a key. + * + * \param[out] attributes The attribute structure to write to. + * \param owner The key owner identifier. + */ +static void mbedtls_set_key_owner_id(psa_key_attributes_t *attributes, + mbedtls_key_owner_id_t owner); +#endif + +/** Set the location of a persistent key. + * + * To make a key persistent, you must give it a persistent key identifier + * with psa_set_key_id(). By default, a key that has a persistent identifier + * is stored in the default storage area identifier by + * #PSA_KEY_LIFETIME_PERSISTENT. Call this function to choose a storage + * area, or to explicitly declare the key as volatile. + * + * This function does not access storage, it merely stores the given + * value in the structure. + * The persistent key will be written to storage when the attribute + * structure is passed to a key creation function such as + * psa_import_key(), psa_generate_key(), + * psa_key_derivation_output_key() or psa_copy_key(). + * + * This function may be declared as `static` (i.e. without external + * linkage). This function may be provided as a function-like macro, + * but in this case it must evaluate each of its arguments exactly once. + * + * \param[out] attributes The attribute structure to write to. + * \param lifetime The lifetime for the key. + * If this is #PSA_KEY_LIFETIME_VOLATILE, the + * key will be volatile, and the key identifier + * attribute is reset to 0. + */ +static void psa_set_key_lifetime(psa_key_attributes_t *attributes, + psa_key_lifetime_t lifetime); + +/** Retrieve the key identifier from key attributes. + * + * This function may be declared as `static` (i.e. without external + * linkage). This function may be provided as a function-like macro, + * but in this case it must evaluate its argument exactly once. + * + * \param[in] attributes The key attribute structure to query. + * + * \return The persistent identifier stored in the attribute structure. + * This value is unspecified if the attribute structure declares + * the key as volatile. + */ +static mbedtls_svc_key_id_t psa_get_key_id( + const psa_key_attributes_t *attributes); + +/** Retrieve the lifetime from key attributes. + * + * This function may be declared as `static` (i.e. without external + * linkage). This function may be provided as a function-like macro, + * but in this case it must evaluate its argument exactly once. + * + * \param[in] attributes The key attribute structure to query. + * + * \return The lifetime value stored in the attribute structure. + */ +static psa_key_lifetime_t psa_get_key_lifetime( + const psa_key_attributes_t *attributes); + +/** Declare usage flags for a key. + * + * Usage flags are part of a key's usage policy. They encode what + * kind of operations are permitted on the key. For more details, + * refer to the documentation of the type #psa_key_usage_t. + * + * This function overwrites any usage flags + * previously set in \p attributes. + * + * This function may be declared as `static` (i.e. without external + * linkage). This function may be provided as a function-like macro, + * but in this case it must evaluate each of its arguments exactly once. + * + * \param[out] attributes The attribute structure to write to. + * \param usage_flags The usage flags to write. + */ +static void psa_set_key_usage_flags(psa_key_attributes_t *attributes, + psa_key_usage_t usage_flags); + +/** Retrieve the usage flags from key attributes. + * + * This function may be declared as `static` (i.e. without external + * linkage). This function may be provided as a function-like macro, + * but in this case it must evaluate its argument exactly once. + * + * \param[in] attributes The key attribute structure to query. + * + * \return The usage flags stored in the attribute structure. + */ +static psa_key_usage_t psa_get_key_usage_flags( + const psa_key_attributes_t *attributes); + +/** Declare the permitted algorithm policy for a key. + * + * The permitted algorithm policy of a key encodes which algorithm or + * algorithms are permitted to be used with this key. The following + * algorithm policies are supported: + * - 0 does not allow any cryptographic operation with the key. The key + * may be used for non-cryptographic actions such as exporting (if + * permitted by the usage flags). + * - An algorithm value permits this particular algorithm. + * - An algorithm wildcard built from #PSA_ALG_ANY_HASH allows the specified + * signature scheme with any hash algorithm. + * - An algorithm built from #PSA_ALG_AT_LEAST_THIS_LENGTH_MAC allows + * any MAC algorithm from the same base class (e.g. CMAC) which + * generates/verifies a MAC length greater than or equal to the length + * encoded in the wildcard algorithm. + * - An algorithm built from #PSA_ALG_AEAD_WITH_AT_LEAST_THIS_LENGTH_TAG + * allows any AEAD algorithm from the same base class (e.g. CCM) which + * generates/verifies a tag length greater than or equal to the length + * encoded in the wildcard algorithm. + * + * This function overwrites any algorithm policy + * previously set in \p attributes. + * + * This function may be declared as `static` (i.e. without external + * linkage). This function may be provided as a function-like macro, + * but in this case it must evaluate each of its arguments exactly once. + * + * \param[out] attributes The attribute structure to write to. + * \param alg The permitted algorithm policy to write. + */ +static void psa_set_key_algorithm(psa_key_attributes_t *attributes, + psa_algorithm_t alg); + + +/** Retrieve the algorithm policy from key attributes. + * + * This function may be declared as `static` (i.e. without external + * linkage). This function may be provided as a function-like macro, + * but in this case it must evaluate its argument exactly once. + * + * \param[in] attributes The key attribute structure to query. + * + * \return The algorithm stored in the attribute structure. + */ +static psa_algorithm_t psa_get_key_algorithm( + const psa_key_attributes_t *attributes); + +/** Declare the type of a key. + * + * This function overwrites any key type + * previously set in \p attributes. + * + * This function may be declared as `static` (i.e. without external + * linkage). This function may be provided as a function-like macro, + * but in this case it must evaluate each of its arguments exactly once. + * + * \param[out] attributes The attribute structure to write to. + * \param type The key type to write. + * If this is 0, the key type in \p attributes + * becomes unspecified. + */ +static void psa_set_key_type(psa_key_attributes_t *attributes, + psa_key_type_t type); + + +/** Declare the size of a key. + * + * This function overwrites any key size previously set in \p attributes. + * + * This function may be declared as `static` (i.e. without external + * linkage). This function may be provided as a function-like macro, + * but in this case it must evaluate each of its arguments exactly once. + * + * \param[out] attributes The attribute structure to write to. + * \param bits The key size in bits. + * If this is 0, the key size in \p attributes + * becomes unspecified. Keys of size 0 are + * not supported. + */ +static void psa_set_key_bits(psa_key_attributes_t *attributes, + size_t bits); + +/** Retrieve the key type from key attributes. + * + * This function may be declared as `static` (i.e. without external + * linkage). This function may be provided as a function-like macro, + * but in this case it must evaluate its argument exactly once. + * + * \param[in] attributes The key attribute structure to query. + * + * \return The key type stored in the attribute structure. + */ +static psa_key_type_t psa_get_key_type(const psa_key_attributes_t *attributes); + +/** Retrieve the key size from key attributes. + * + * This function may be declared as `static` (i.e. without external + * linkage). This function may be provided as a function-like macro, + * but in this case it must evaluate its argument exactly once. + * + * \param[in] attributes The key attribute structure to query. + * + * \return The key size stored in the attribute structure, in bits. + */ +static size_t psa_get_key_bits(const psa_key_attributes_t *attributes); + +/** Retrieve the attributes of a key. + * + * This function first resets the attribute structure as with + * psa_reset_key_attributes(). It then copies the attributes of + * the given key into the given attribute structure. + * + * \note This function may allocate memory or other resources. + * Once you have called this function on an attribute structure, + * you must call psa_reset_key_attributes() to free these resources. + * + * \param[in] key Identifier of the key to query. + * \param[in,out] attributes On success, the attributes of the key. + * On failure, equivalent to a + * freshly-initialized structure. + * + * \retval #PSA_SUCCESS \emptydescription + * \retval #PSA_ERROR_INVALID_HANDLE \emptydescription + * \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription + * \retval #PSA_ERROR_COMMUNICATION_FAILURE \emptydescription + * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription + * \retval #PSA_ERROR_STORAGE_FAILURE \emptydescription + * \retval #PSA_ERROR_DATA_CORRUPT \emptydescription + * \retval #PSA_ERROR_DATA_INVALID \emptydescription + * \retval #PSA_ERROR_BAD_STATE + * The library has not been previously initialized by psa_crypto_init(). + * It is implementation-dependent whether a failure to initialize + * results in this error code. + */ +psa_status_t psa_get_key_attributes(mbedtls_svc_key_id_t key, + psa_key_attributes_t *attributes); + +/** Reset a key attribute structure to a freshly initialized state. + * + * You must initialize the attribute structure as described in the + * documentation of the type #psa_key_attributes_t before calling this + * function. Once the structure has been initialized, you may call this + * function at any time. + * + * This function frees any auxiliary resources that the structure + * may contain. + * + * \param[in,out] attributes The attribute structure to reset. + */ +void psa_reset_key_attributes(psa_key_attributes_t *attributes); + +/**@}*/ + +/** \defgroup key_management Key management + * @{ + */ + +/** Remove non-essential copies of key material from memory. + * + * If the key identifier designates a volatile key, this functions does not do + * anything and returns successfully. + * + * If the key identifier designates a persistent key, then this function will + * free all resources associated with the key in volatile memory. The key + * data in persistent storage is not affected and the key can still be used. + * + * \param key Identifier of the key to purge. + * + * \retval #PSA_SUCCESS + * The key material will have been removed from memory if it is not + * currently required. + * \retval #PSA_ERROR_INVALID_ARGUMENT + * \p key is not a valid key identifier. + * \retval #PSA_ERROR_BAD_STATE + * The library has not been previously initialized by psa_crypto_init(). + * It is implementation-dependent whether a failure to initialize + * results in this error code. + */ +psa_status_t psa_purge_key(mbedtls_svc_key_id_t key); + +/** Make a copy of a key. + * + * Copy key material from one location to another. + * + * This function is primarily useful to copy a key from one location + * to another, since it populates a key using the material from + * another key which may have a different lifetime. + * + * This function may be used to share a key with a different party, + * subject to implementation-defined restrictions on key sharing. + * + * The policy on the source key must have the usage flag + * #PSA_KEY_USAGE_COPY set. + * This flag is sufficient to permit the copy if the key has the lifetime + * #PSA_KEY_LIFETIME_VOLATILE or #PSA_KEY_LIFETIME_PERSISTENT. + * Some secure elements do not provide a way to copy a key without + * making it extractable from the secure element. If a key is located + * in such a secure element, then the key must have both usage flags + * #PSA_KEY_USAGE_COPY and #PSA_KEY_USAGE_EXPORT in order to make + * a copy of the key outside the secure element. + * + * The resulting key may only be used in a way that conforms to + * both the policy of the original key and the policy specified in + * the \p attributes parameter: + * - The usage flags on the resulting key are the bitwise-and of the + * usage flags on the source policy and the usage flags in \p attributes. + * - If both allow the same algorithm or wildcard-based + * algorithm policy, the resulting key has the same algorithm policy. + * - If either of the policies allows an algorithm and the other policy + * allows a wildcard-based algorithm policy that includes this algorithm, + * the resulting key allows the same algorithm. + * - If the policies do not allow any algorithm in common, this function + * fails with the status #PSA_ERROR_INVALID_ARGUMENT. + * + * The effect of this function on implementation-defined attributes is + * implementation-defined. + * + * \param source_key The key to copy. It must allow the usage + * #PSA_KEY_USAGE_COPY. If a private or secret key is + * being copied outside of a secure element it must + * also allow #PSA_KEY_USAGE_EXPORT. + * \param[in] attributes The attributes for the new key. + * They are used as follows: + * - The key type and size may be 0. If either is + * nonzero, it must match the corresponding + * attribute of the source key. + * - The key location (the lifetime and, for + * persistent keys, the key identifier) is + * used directly. + * - The policy constraints (usage flags and + * algorithm policy) are combined from + * the source key and \p attributes so that + * both sets of restrictions apply, as + * described in the documentation of this function. + * \param[out] target_key On success, an identifier for the newly created + * key. For persistent keys, this is the key + * identifier defined in \p attributes. + * \c 0 on failure. + * + * \retval #PSA_SUCCESS \emptydescription + * \retval #PSA_ERROR_INVALID_HANDLE + * \p source_key is invalid. + * \retval #PSA_ERROR_ALREADY_EXISTS + * This is an attempt to create a persistent key, and there is + * already a persistent key with the given identifier. + * \retval #PSA_ERROR_INVALID_ARGUMENT + * The lifetime or identifier in \p attributes are invalid, or + * the policy constraints on the source and specified in + * \p attributes are incompatible, or + * \p attributes specifies a key type or key size + * which does not match the attributes of the source key. + * \retval #PSA_ERROR_NOT_PERMITTED + * The source key does not have the #PSA_KEY_USAGE_COPY usage flag, or + * the source key is not exportable and its lifetime does not + * allow copying it to the target's lifetime. + * \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription + * \retval #PSA_ERROR_INSUFFICIENT_STORAGE \emptydescription + * \retval #PSA_ERROR_COMMUNICATION_FAILURE \emptydescription + * \retval #PSA_ERROR_HARDWARE_FAILURE \emptydescription + * \retval #PSA_ERROR_DATA_INVALID \emptydescription + * \retval #PSA_ERROR_DATA_CORRUPT \emptydescription + * \retval #PSA_ERROR_STORAGE_FAILURE \emptydescription + * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription + * \retval #PSA_ERROR_BAD_STATE + * The library has not been previously initialized by psa_crypto_init(). + * It is implementation-dependent whether a failure to initialize + * results in this error code. + */ +psa_status_t psa_copy_key(mbedtls_svc_key_id_t source_key, + const psa_key_attributes_t *attributes, + mbedtls_svc_key_id_t *target_key); + + +/** + * \brief Destroy a key. + * + * This function destroys a key from both volatile + * memory and, if applicable, non-volatile storage. Implementations shall + * make a best effort to ensure that the key material cannot be recovered. + * + * This function also erases any metadata such as policies and frees + * resources associated with the key. + * + * If a key is currently in use in a multipart operation, then destroying the + * key will cause the multipart operation to fail. + * + * \param key Identifier of the key to erase. If this is \c 0, do nothing and + * return #PSA_SUCCESS. + * + * \retval #PSA_SUCCESS + * \p key was a valid identifier and the key material that it + * referred to has been erased. Alternatively, \p key is \c 0. + * \retval #PSA_ERROR_NOT_PERMITTED + * The key cannot be erased because it is + * read-only, either due to a policy or due to physical restrictions. + * \retval #PSA_ERROR_INVALID_HANDLE + * \p key is not a valid identifier nor \c 0. + * \retval #PSA_ERROR_COMMUNICATION_FAILURE + * There was a failure in communication with the cryptoprocessor. + * The key material may still be present in the cryptoprocessor. + * \retval #PSA_ERROR_DATA_INVALID + * This error is typically a result of either storage corruption on a + * cleartext storage backend, or an attempt to read data that was + * written by an incompatible version of the library. + * \retval #PSA_ERROR_STORAGE_FAILURE + * The storage is corrupted. Implementations shall make a best effort + * to erase key material even in this stage, however applications + * should be aware that it may be impossible to guarantee that the + * key material is not recoverable in such cases. + * \retval #PSA_ERROR_CORRUPTION_DETECTED + * An unexpected condition which is not a storage corruption or + * a communication failure occurred. The cryptoprocessor may have + * been compromised. + * \retval #PSA_ERROR_BAD_STATE + * The library has not been previously initialized by psa_crypto_init(). + * It is implementation-dependent whether a failure to initialize + * results in this error code. + */ +psa_status_t psa_destroy_key(mbedtls_svc_key_id_t key); + +/**@}*/ + +/** \defgroup import_export Key import and export + * @{ + */ + +/** + * \brief Import a key in binary format. + * + * This function supports any output from psa_export_key(). Refer to the + * documentation of psa_export_public_key() for the format of public keys + * and to the documentation of psa_export_key() for the format for + * other key types. + * + * The key data determines the key size. The attributes may optionally + * specify a key size; in this case it must match the size determined + * from the key data. A key size of 0 in \p attributes indicates that + * the key size is solely determined by the key data. + * + * Implementations must reject an attempt to import a key of size 0. + * + * This specification supports a single format for each key type. + * Implementations may support other formats as long as the standard + * format is supported. Implementations that support other formats + * should ensure that the formats are clearly unambiguous so as to + * minimize the risk that an invalid input is accidentally interpreted + * according to a different format. + * + * \param[in] attributes The attributes for the new key. + * The key size is always determined from the + * \p data buffer. + * If the key size in \p attributes is nonzero, + * it must be equal to the size from \p data. + * \param[out] key On success, an identifier to the newly created key. + * For persistent keys, this is the key identifier + * defined in \p attributes. + * \c 0 on failure. + * \param[in] data Buffer containing the key data. The content of this + * buffer is interpreted according to the type declared + * in \p attributes. + * All implementations must support at least the format + * described in the documentation + * of psa_export_key() or psa_export_public_key() for + * the chosen type. Implementations may allow other + * formats, but should be conservative: implementations + * should err on the side of rejecting content if it + * may be erroneous (e.g. wrong type or truncated data). + * \param data_length Size of the \p data buffer in bytes. + * + * \retval #PSA_SUCCESS + * Success. + * If the key is persistent, the key material and the key's metadata + * have been saved to persistent storage. + * \retval #PSA_ERROR_ALREADY_EXISTS + * This is an attempt to create a persistent key, and there is + * already a persistent key with the given identifier. + * \retval #PSA_ERROR_NOT_SUPPORTED + * The key type or key size is not supported, either by the + * implementation in general or in this particular persistent location. + * \retval #PSA_ERROR_INVALID_ARGUMENT + * The key attributes, as a whole, are invalid, or + * the key data is not correctly formatted, or + * the size in \p attributes is nonzero and does not match the size + * of the key data. + * \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription + * \retval #PSA_ERROR_INSUFFICIENT_STORAGE \emptydescription + * \retval #PSA_ERROR_COMMUNICATION_FAILURE \emptydescription + * \retval #PSA_ERROR_DATA_CORRUPT \emptydescription + * \retval #PSA_ERROR_DATA_INVALID \emptydescription + * \retval #PSA_ERROR_STORAGE_FAILURE \emptydescription + * \retval #PSA_ERROR_HARDWARE_FAILURE \emptydescription + * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription + * \retval #PSA_ERROR_BAD_STATE + * The library has not been previously initialized by psa_crypto_init(). + * It is implementation-dependent whether a failure to initialize + * results in this error code. + */ +psa_status_t psa_import_key(const psa_key_attributes_t *attributes, + const uint8_t *data, + size_t data_length, + mbedtls_svc_key_id_t *key); + + + +/** + * \brief Export a key in binary format. + * + * The output of this function can be passed to psa_import_key() to + * create an equivalent object. + * + * If the implementation of psa_import_key() supports other formats + * beyond the format specified here, the output from psa_export_key() + * must use the representation specified here, not the original + * representation. + * + * For standard key types, the output format is as follows: + * + * - For symmetric keys (including MAC keys), the format is the + * raw bytes of the key. + * - For DES, the key data consists of 8 bytes. The parity bits must be + * correct. + * - For Triple-DES, the format is the concatenation of the + * two or three DES keys. + * - For RSA key pairs (#PSA_KEY_TYPE_RSA_KEY_PAIR), the format + * is the non-encrypted DER encoding of the representation defined by + * PKCS\#1 (RFC 8017) as `RSAPrivateKey`, version 0. + * ``` + * RSAPrivateKey ::= SEQUENCE { + * version INTEGER, -- must be 0 + * modulus INTEGER, -- n + * publicExponent INTEGER, -- e + * privateExponent INTEGER, -- d + * prime1 INTEGER, -- p + * prime2 INTEGER, -- q + * exponent1 INTEGER, -- d mod (p-1) + * exponent2 INTEGER, -- d mod (q-1) + * coefficient INTEGER, -- (inverse of q) mod p + * } + * ``` + * - For elliptic curve key pairs (key types for which + * #PSA_KEY_TYPE_IS_ECC_KEY_PAIR is true), the format is + * a representation of the private value as a `ceiling(m/8)`-byte string + * where `m` is the bit size associated with the curve, i.e. the bit size + * of the order of the curve's coordinate field. This byte string is + * in little-endian order for Montgomery curves (curve types + * `PSA_ECC_FAMILY_CURVEXXX`), and in big-endian order for Weierstrass + * curves (curve types `PSA_ECC_FAMILY_SECTXXX`, `PSA_ECC_FAMILY_SECPXXX` + * and `PSA_ECC_FAMILY_BRAINPOOL_PXXX`). + * For Weierstrass curves, this is the content of the `privateKey` field of + * the `ECPrivateKey` format defined by RFC 5915. For Montgomery curves, + * the format is defined by RFC 7748, and output is masked according to §5. + * For twisted Edwards curves, the private key is as defined by RFC 8032 + * (a 32-byte string for Edwards25519, a 57-byte string for Edwards448). + * - For Diffie-Hellman key exchange key pairs (key types for which + * #PSA_KEY_TYPE_IS_DH_KEY_PAIR is true), the + * format is the representation of the private key `x` as a big-endian byte + * string. The length of the byte string is the private key size in bytes + * (leading zeroes are not stripped). + * - For public keys (key types for which #PSA_KEY_TYPE_IS_PUBLIC_KEY is + * true), the format is the same as for psa_export_public_key(). + * + * The policy on the key must have the usage flag #PSA_KEY_USAGE_EXPORT set. + * + * \param key Identifier of the key to export. It must allow the + * usage #PSA_KEY_USAGE_EXPORT, unless it is a public + * key. + * \param[out] data Buffer where the key data is to be written. + * \param data_size Size of the \p data buffer in bytes. + * \param[out] data_length On success, the number of bytes + * that make up the key data. + * + * \retval #PSA_SUCCESS \emptydescription + * \retval #PSA_ERROR_INVALID_HANDLE \emptydescription + * \retval #PSA_ERROR_NOT_PERMITTED + * The key does not have the #PSA_KEY_USAGE_EXPORT flag. + * \retval #PSA_ERROR_NOT_SUPPORTED \emptydescription + * \retval #PSA_ERROR_BUFFER_TOO_SMALL + * The size of the \p data buffer is too small. You can determine a + * sufficient buffer size by calling + * #PSA_EXPORT_KEY_OUTPUT_SIZE(\c type, \c bits) + * where \c type is the key type + * and \c bits is the key size in bits. + * \retval #PSA_ERROR_COMMUNICATION_FAILURE \emptydescription + * \retval #PSA_ERROR_HARDWARE_FAILURE \emptydescription + * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription + * \retval #PSA_ERROR_STORAGE_FAILURE \emptydescription + * \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription + * \retval #PSA_ERROR_BAD_STATE + * The library has not been previously initialized by psa_crypto_init(). + * It is implementation-dependent whether a failure to initialize + * results in this error code. + */ +psa_status_t psa_export_key(mbedtls_svc_key_id_t key, + uint8_t *data, + size_t data_size, + size_t *data_length); + +/** + * \brief Export a public key or the public part of a key pair in binary format. + * + * The output of this function can be passed to psa_import_key() to + * create an object that is equivalent to the public key. + * + * This specification supports a single format for each key type. + * Implementations may support other formats as long as the standard + * format is supported. Implementations that support other formats + * should ensure that the formats are clearly unambiguous so as to + * minimize the risk that an invalid input is accidentally interpreted + * according to a different format. + * + * For standard key types, the output format is as follows: + * - For RSA public keys (#PSA_KEY_TYPE_RSA_PUBLIC_KEY), the DER encoding of + * the representation defined by RFC 3279 §2.3.1 as `RSAPublicKey`. + * ``` + * RSAPublicKey ::= SEQUENCE { + * modulus INTEGER, -- n + * publicExponent INTEGER } -- e + * ``` + * - For elliptic curve keys on a twisted Edwards curve (key types for which + * #PSA_KEY_TYPE_IS_ECC_PUBLIC_KEY is true and #PSA_KEY_TYPE_ECC_GET_FAMILY + * returns #PSA_ECC_FAMILY_TWISTED_EDWARDS), the public key is as defined + * by RFC 8032 + * (a 32-byte string for Edwards25519, a 57-byte string for Edwards448). + * - For other elliptic curve public keys (key types for which + * #PSA_KEY_TYPE_IS_ECC_PUBLIC_KEY is true), the format is the uncompressed + * representation defined by SEC1 §2.3.3 as the content of an ECPoint. + * Let `m` be the bit size associated with the curve, i.e. the bit size of + * `q` for a curve over `F_q`. The representation consists of: + * - The byte 0x04; + * - `x_P` as a `ceiling(m/8)`-byte string, big-endian; + * - `y_P` as a `ceiling(m/8)`-byte string, big-endian. + * - For Diffie-Hellman key exchange public keys (key types for which + * #PSA_KEY_TYPE_IS_DH_PUBLIC_KEY is true), + * the format is the representation of the public key `y = g^x mod p` as a + * big-endian byte string. The length of the byte string is the length of the + * base prime `p` in bytes. + * + * Exporting a public key object or the public part of a key pair is + * always permitted, regardless of the key's usage flags. + * + * \param key Identifier of the key to export. + * \param[out] data Buffer where the key data is to be written. + * \param data_size Size of the \p data buffer in bytes. + * \param[out] data_length On success, the number of bytes + * that make up the key data. + * + * \retval #PSA_SUCCESS \emptydescription + * \retval #PSA_ERROR_INVALID_HANDLE \emptydescription + * \retval #PSA_ERROR_INVALID_ARGUMENT + * The key is neither a public key nor a key pair. + * \retval #PSA_ERROR_NOT_SUPPORTED \emptydescription + * \retval #PSA_ERROR_BUFFER_TOO_SMALL + * The size of the \p data buffer is too small. You can determine a + * sufficient buffer size by calling + * #PSA_EXPORT_KEY_OUTPUT_SIZE(#PSA_KEY_TYPE_PUBLIC_KEY_OF_KEY_PAIR(\c type), \c bits) + * where \c type is the key type + * and \c bits is the key size in bits. + * \retval #PSA_ERROR_COMMUNICATION_FAILURE \emptydescription + * \retval #PSA_ERROR_HARDWARE_FAILURE \emptydescription + * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription + * \retval #PSA_ERROR_STORAGE_FAILURE \emptydescription + * \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription + * \retval #PSA_ERROR_BAD_STATE + * The library has not been previously initialized by psa_crypto_init(). + * It is implementation-dependent whether a failure to initialize + * results in this error code. + */ +psa_status_t psa_export_public_key(mbedtls_svc_key_id_t key, + uint8_t *data, + size_t data_size, + size_t *data_length); + + + +/**@}*/ + +/** \defgroup hash Message digests + * @{ + */ + +/** Calculate the hash (digest) of a message. + * + * \note To verify the hash of a message against an + * expected value, use psa_hash_compare() instead. + * + * \param alg The hash algorithm to compute (\c PSA_ALG_XXX value + * such that #PSA_ALG_IS_HASH(\p alg) is true). + * \param[in] input Buffer containing the message to hash. + * \param input_length Size of the \p input buffer in bytes. + * \param[out] hash Buffer where the hash is to be written. + * \param hash_size Size of the \p hash buffer in bytes. + * \param[out] hash_length On success, the number of bytes + * that make up the hash value. This is always + * #PSA_HASH_LENGTH(\p alg). + * + * \retval #PSA_SUCCESS + * Success. + * \retval #PSA_ERROR_NOT_SUPPORTED + * \p alg is not supported or is not a hash algorithm. + * \retval #PSA_ERROR_INVALID_ARGUMENT \emptydescription + * \retval #PSA_ERROR_BUFFER_TOO_SMALL + * \p hash_size is too small + * \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription + * \retval #PSA_ERROR_COMMUNICATION_FAILURE \emptydescription + * \retval #PSA_ERROR_HARDWARE_FAILURE \emptydescription + * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription + * \retval #PSA_ERROR_BAD_STATE + * The library has not been previously initialized by psa_crypto_init(). + * It is implementation-dependent whether a failure to initialize + * results in this error code. + */ +psa_status_t psa_hash_compute(psa_algorithm_t alg, + const uint8_t *input, + size_t input_length, + uint8_t *hash, + size_t hash_size, + size_t *hash_length); + +/** Calculate the hash (digest) of a message and compare it with a + * reference value. + * + * \param alg The hash algorithm to compute (\c PSA_ALG_XXX value + * such that #PSA_ALG_IS_HASH(\p alg) is true). + * \param[in] input Buffer containing the message to hash. + * \param input_length Size of the \p input buffer in bytes. + * \param[out] hash Buffer containing the expected hash value. + * \param hash_length Size of the \p hash buffer in bytes. + * + * \retval #PSA_SUCCESS + * The expected hash is identical to the actual hash of the input. + * \retval #PSA_ERROR_INVALID_SIGNATURE + * The hash of the message was calculated successfully, but it + * differs from the expected hash. + * \retval #PSA_ERROR_NOT_SUPPORTED + * \p alg is not supported or is not a hash algorithm. + * \retval #PSA_ERROR_INVALID_ARGUMENT + * \p input_length or \p hash_length do not match the hash size for \p alg + * \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription + * \retval #PSA_ERROR_COMMUNICATION_FAILURE \emptydescription + * \retval #PSA_ERROR_HARDWARE_FAILURE \emptydescription + * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription + * \retval #PSA_ERROR_BAD_STATE + * The library has not been previously initialized by psa_crypto_init(). + * It is implementation-dependent whether a failure to initialize + * results in this error code. + */ +psa_status_t psa_hash_compare(psa_algorithm_t alg, + const uint8_t *input, + size_t input_length, + const uint8_t *hash, + size_t hash_length); + +/** The type of the state data structure for multipart hash operations. + * + * Before calling any function on a hash operation object, the application must + * initialize it by any of the following means: + * - Set the structure to all-bits-zero, for example: + * \code + * psa_hash_operation_t operation; + * memset(&operation, 0, sizeof(operation)); + * \endcode + * - Initialize the structure to logical zero values, for example: + * \code + * psa_hash_operation_t operation = {0}; + * \endcode + * - Initialize the structure to the initializer #PSA_HASH_OPERATION_INIT, + * for example: + * \code + * psa_hash_operation_t operation = PSA_HASH_OPERATION_INIT; + * \endcode + * - Assign the result of the function psa_hash_operation_init() + * to the structure, for example: + * \code + * psa_hash_operation_t operation; + * operation = psa_hash_operation_init(); + * \endcode + * + * This is an implementation-defined \c struct. Applications should not + * make any assumptions about the content of this structure. + * Implementation details can change in future versions without notice. */ +typedef struct psa_hash_operation_s psa_hash_operation_t; + +/** \def PSA_HASH_OPERATION_INIT + * + * This macro returns a suitable initializer for a hash operation object + * of type #psa_hash_operation_t. + */ + +/** Return an initial value for a hash operation object. + */ +static psa_hash_operation_t psa_hash_operation_init(void); + +/** Set up a multipart hash operation. + * + * The sequence of operations to calculate a hash (message digest) + * is as follows: + * -# Allocate an operation object which will be passed to all the functions + * listed here. + * -# Initialize the operation object with one of the methods described in the + * documentation for #psa_hash_operation_t, e.g. #PSA_HASH_OPERATION_INIT. + * -# Call psa_hash_setup() to specify the algorithm. + * -# Call psa_hash_update() zero, one or more times, passing a fragment + * of the message each time. The hash that is calculated is the hash + * of the concatenation of these messages in order. + * -# To calculate the hash, call psa_hash_finish(). + * To compare the hash with an expected value, call psa_hash_verify(). + * + * If an error occurs at any step after a call to psa_hash_setup(), the + * operation will need to be reset by a call to psa_hash_abort(). The + * application may call psa_hash_abort() at any time after the operation + * has been initialized. + * + * After a successful call to psa_hash_setup(), the application must + * eventually terminate the operation. The following events terminate an + * operation: + * - A successful call to psa_hash_finish() or psa_hash_verify(). + * - A call to psa_hash_abort(). + * + * \param[in,out] operation The operation object to set up. It must have + * been initialized as per the documentation for + * #psa_hash_operation_t and not yet in use. + * \param alg The hash algorithm to compute (\c PSA_ALG_XXX value + * such that #PSA_ALG_IS_HASH(\p alg) is true). + * + * \retval #PSA_SUCCESS + * Success. + * \retval #PSA_ERROR_NOT_SUPPORTED + * \p alg is not a supported hash algorithm. + * \retval #PSA_ERROR_INVALID_ARGUMENT + * \p alg is not a hash algorithm. + * \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription + * \retval #PSA_ERROR_COMMUNICATION_FAILURE \emptydescription + * \retval #PSA_ERROR_HARDWARE_FAILURE \emptydescription + * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription + * \retval #PSA_ERROR_BAD_STATE + * The operation state is not valid (it must be inactive), or + * the library has not been previously initialized by psa_crypto_init(). + * It is implementation-dependent whether a failure to initialize + * results in this error code. + */ +psa_status_t psa_hash_setup(psa_hash_operation_t *operation, + psa_algorithm_t alg); + +/** Add a message fragment to a multipart hash operation. + * + * The application must call psa_hash_setup() before calling this function. + * + * If this function returns an error status, the operation enters an error + * state and must be aborted by calling psa_hash_abort(). + * + * \param[in,out] operation Active hash operation. + * \param[in] input Buffer containing the message fragment to hash. + * \param input_length Size of the \p input buffer in bytes. + * + * \retval #PSA_SUCCESS + * Success. + * \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription + * \retval #PSA_ERROR_COMMUNICATION_FAILURE \emptydescription + * \retval #PSA_ERROR_HARDWARE_FAILURE \emptydescription + * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription + * \retval #PSA_ERROR_BAD_STATE + * The operation state is not valid (it must be active), or + * the library has not been previously initialized by psa_crypto_init(). + * It is implementation-dependent whether a failure to initialize + * results in this error code. + */ +psa_status_t psa_hash_update(psa_hash_operation_t *operation, + const uint8_t *input, + size_t input_length); + +/** Finish the calculation of the hash of a message. + * + * The application must call psa_hash_setup() before calling this function. + * This function calculates the hash of the message formed by concatenating + * the inputs passed to preceding calls to psa_hash_update(). + * + * When this function returns successfully, the operation becomes inactive. + * If this function returns an error status, the operation enters an error + * state and must be aborted by calling psa_hash_abort(). + * + * \warning Applications should not call this function if they expect + * a specific value for the hash. Call psa_hash_verify() instead. + * Beware that comparing integrity or authenticity data such as + * hash values with a function such as \c memcmp is risky + * because the time taken by the comparison may leak information + * about the hashed data which could allow an attacker to guess + * a valid hash and thereby bypass security controls. + * + * \param[in,out] operation Active hash operation. + * \param[out] hash Buffer where the hash is to be written. + * \param hash_size Size of the \p hash buffer in bytes. + * \param[out] hash_length On success, the number of bytes + * that make up the hash value. This is always + * #PSA_HASH_LENGTH(\c alg) where \c alg is the + * hash algorithm that is calculated. + * + * \retval #PSA_SUCCESS + * Success. + * \retval #PSA_ERROR_BUFFER_TOO_SMALL + * The size of the \p hash buffer is too small. You can determine a + * sufficient buffer size by calling #PSA_HASH_LENGTH(\c alg) + * where \c alg is the hash algorithm that is calculated. + * \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription + * \retval #PSA_ERROR_COMMUNICATION_FAILURE \emptydescription + * \retval #PSA_ERROR_HARDWARE_FAILURE \emptydescription + * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription + * \retval #PSA_ERROR_BAD_STATE + * The operation state is not valid (it must be active), or + * the library has not been previously initialized by psa_crypto_init(). + * It is implementation-dependent whether a failure to initialize + * results in this error code. + */ +psa_status_t psa_hash_finish(psa_hash_operation_t *operation, + uint8_t *hash, + size_t hash_size, + size_t *hash_length); + +/** Finish the calculation of the hash of a message and compare it with + * an expected value. + * + * The application must call psa_hash_setup() before calling this function. + * This function calculates the hash of the message formed by concatenating + * the inputs passed to preceding calls to psa_hash_update(). It then + * compares the calculated hash with the expected hash passed as a + * parameter to this function. + * + * When this function returns successfully, the operation becomes inactive. + * If this function returns an error status, the operation enters an error + * state and must be aborted by calling psa_hash_abort(). + * + * \note Implementations shall make the best effort to ensure that the + * comparison between the actual hash and the expected hash is performed + * in constant time. + * + * \param[in,out] operation Active hash operation. + * \param[in] hash Buffer containing the expected hash value. + * \param hash_length Size of the \p hash buffer in bytes. + * + * \retval #PSA_SUCCESS + * The expected hash is identical to the actual hash of the message. + * \retval #PSA_ERROR_INVALID_SIGNATURE + * The hash of the message was calculated successfully, but it + * differs from the expected hash. + * \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription + * \retval #PSA_ERROR_COMMUNICATION_FAILURE \emptydescription + * \retval #PSA_ERROR_HARDWARE_FAILURE \emptydescription + * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription + * \retval #PSA_ERROR_BAD_STATE + * The operation state is not valid (it must be active), or + * the library has not been previously initialized by psa_crypto_init(). + * It is implementation-dependent whether a failure to initialize + * results in this error code. + */ +psa_status_t psa_hash_verify(psa_hash_operation_t *operation, + const uint8_t *hash, + size_t hash_length); + +/** Abort a hash operation. + * + * Aborting an operation frees all associated resources except for the + * \p operation structure itself. Once aborted, the operation object + * can be reused for another operation by calling + * psa_hash_setup() again. + * + * You may call this function any time after the operation object has + * been initialized by one of the methods described in #psa_hash_operation_t. + * + * In particular, calling psa_hash_abort() after the operation has been + * terminated by a call to psa_hash_abort(), psa_hash_finish() or + * psa_hash_verify() is safe and has no effect. + * + * \param[in,out] operation Initialized hash operation. + * + * \retval #PSA_SUCCESS \emptydescription + * \retval #PSA_ERROR_COMMUNICATION_FAILURE \emptydescription + * \retval #PSA_ERROR_HARDWARE_FAILURE \emptydescription + * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription + * \retval #PSA_ERROR_BAD_STATE + * The library has not been previously initialized by psa_crypto_init(). + * It is implementation-dependent whether a failure to initialize + * results in this error code. + */ +psa_status_t psa_hash_abort(psa_hash_operation_t *operation); + +/** Clone a hash operation. + * + * This function copies the state of an ongoing hash operation to + * a new operation object. In other words, this function is equivalent + * to calling psa_hash_setup() on \p target_operation with the same + * algorithm that \p source_operation was set up for, then + * psa_hash_update() on \p target_operation with the same input that + * that was passed to \p source_operation. After this function returns, the + * two objects are independent, i.e. subsequent calls involving one of + * the objects do not affect the other object. + * + * \param[in] source_operation The active hash operation to clone. + * \param[in,out] target_operation The operation object to set up. + * It must be initialized but not active. + * + * \retval #PSA_SUCCESS \emptydescription + * \retval #PSA_ERROR_COMMUNICATION_FAILURE \emptydescription + * \retval #PSA_ERROR_HARDWARE_FAILURE \emptydescription + * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription + * \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription + * \retval #PSA_ERROR_BAD_STATE + * The \p source_operation state is not valid (it must be active), or + * the \p target_operation state is not valid (it must be inactive), or + * the library has not been previously initialized by psa_crypto_init(). + * It is implementation-dependent whether a failure to initialize + * results in this error code. + */ +psa_status_t psa_hash_clone(const psa_hash_operation_t *source_operation, + psa_hash_operation_t *target_operation); + +/**@}*/ + +/** \defgroup MAC Message authentication codes + * @{ + */ + +/** Calculate the MAC (message authentication code) of a message. + * + * \note To verify the MAC of a message against an + * expected value, use psa_mac_verify() instead. + * Beware that comparing integrity or authenticity data such as + * MAC values with a function such as \c memcmp is risky + * because the time taken by the comparison may leak information + * about the MAC value which could allow an attacker to guess + * a valid MAC and thereby bypass security controls. + * + * \param key Identifier of the key to use for the operation. It + * must allow the usage PSA_KEY_USAGE_SIGN_MESSAGE. + * \param alg The MAC algorithm to compute (\c PSA_ALG_XXX value + * such that #PSA_ALG_IS_MAC(\p alg) is true). + * \param[in] input Buffer containing the input message. + * \param input_length Size of the \p input buffer in bytes. + * \param[out] mac Buffer where the MAC value is to be written. + * \param mac_size Size of the \p mac buffer in bytes. + * \param[out] mac_length On success, the number of bytes + * that make up the MAC value. + * + * \retval #PSA_SUCCESS + * Success. + * \retval #PSA_ERROR_INVALID_HANDLE \emptydescription + * \retval #PSA_ERROR_NOT_PERMITTED \emptydescription + * \retval #PSA_ERROR_INVALID_ARGUMENT + * \p key is not compatible with \p alg. + * \retval #PSA_ERROR_NOT_SUPPORTED + * \p alg is not supported or is not a MAC algorithm. + * \retval #PSA_ERROR_BUFFER_TOO_SMALL + * \p mac_size is too small + * \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription + * \retval #PSA_ERROR_COMMUNICATION_FAILURE \emptydescription + * \retval #PSA_ERROR_HARDWARE_FAILURE \emptydescription + * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription + * \retval #PSA_ERROR_STORAGE_FAILURE + * The key could not be retrieved from storage. + * \retval #PSA_ERROR_BAD_STATE + * The library has not been previously initialized by psa_crypto_init(). + * It is implementation-dependent whether a failure to initialize + * results in this error code. + */ +psa_status_t psa_mac_compute(mbedtls_svc_key_id_t key, + psa_algorithm_t alg, + const uint8_t *input, + size_t input_length, + uint8_t *mac, + size_t mac_size, + size_t *mac_length); + +/** Calculate the MAC of a message and compare it with a reference value. + * + * \param key Identifier of the key to use for the operation. It + * must allow the usage PSA_KEY_USAGE_VERIFY_MESSAGE. + * \param alg The MAC algorithm to compute (\c PSA_ALG_XXX value + * such that #PSA_ALG_IS_MAC(\p alg) is true). + * \param[in] input Buffer containing the input message. + * \param input_length Size of the \p input buffer in bytes. + * \param[out] mac Buffer containing the expected MAC value. + * \param mac_length Size of the \p mac buffer in bytes. + * + * \retval #PSA_SUCCESS + * The expected MAC is identical to the actual MAC of the input. + * \retval #PSA_ERROR_INVALID_SIGNATURE + * The MAC of the message was calculated successfully, but it + * differs from the expected value. + * \retval #PSA_ERROR_INVALID_HANDLE \emptydescription + * \retval #PSA_ERROR_NOT_PERMITTED \emptydescription + * \retval #PSA_ERROR_INVALID_ARGUMENT + * \p key is not compatible with \p alg. + * \retval #PSA_ERROR_NOT_SUPPORTED + * \p alg is not supported or is not a MAC algorithm. + * \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription + * \retval #PSA_ERROR_COMMUNICATION_FAILURE \emptydescription + * \retval #PSA_ERROR_HARDWARE_FAILURE \emptydescription + * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription + * \retval #PSA_ERROR_STORAGE_FAILURE + * The key could not be retrieved from storage. + * \retval #PSA_ERROR_BAD_STATE + * The library has not been previously initialized by psa_crypto_init(). + * It is implementation-dependent whether a failure to initialize + * results in this error code. + */ +psa_status_t psa_mac_verify(mbedtls_svc_key_id_t key, + psa_algorithm_t alg, + const uint8_t *input, + size_t input_length, + const uint8_t *mac, + size_t mac_length); + +/** The type of the state data structure for multipart MAC operations. + * + * Before calling any function on a MAC operation object, the application must + * initialize it by any of the following means: + * - Set the structure to all-bits-zero, for example: + * \code + * psa_mac_operation_t operation; + * memset(&operation, 0, sizeof(operation)); + * \endcode + * - Initialize the structure to logical zero values, for example: + * \code + * psa_mac_operation_t operation = {0}; + * \endcode + * - Initialize the structure to the initializer #PSA_MAC_OPERATION_INIT, + * for example: + * \code + * psa_mac_operation_t operation = PSA_MAC_OPERATION_INIT; + * \endcode + * - Assign the result of the function psa_mac_operation_init() + * to the structure, for example: + * \code + * psa_mac_operation_t operation; + * operation = psa_mac_operation_init(); + * \endcode + * + * + * This is an implementation-defined \c struct. Applications should not + * make any assumptions about the content of this structure. + * Implementation details can change in future versions without notice. */ +typedef struct psa_mac_operation_s psa_mac_operation_t; + +/** \def PSA_MAC_OPERATION_INIT + * + * This macro returns a suitable initializer for a MAC operation object of type + * #psa_mac_operation_t. + */ + +/** Return an initial value for a MAC operation object. + */ +static psa_mac_operation_t psa_mac_operation_init(void); + +/** Set up a multipart MAC calculation operation. + * + * This function sets up the calculation of the MAC + * (message authentication code) of a byte string. + * To verify the MAC of a message against an + * expected value, use psa_mac_verify_setup() instead. + * + * The sequence of operations to calculate a MAC is as follows: + * -# Allocate an operation object which will be passed to all the functions + * listed here. + * -# Initialize the operation object with one of the methods described in the + * documentation for #psa_mac_operation_t, e.g. #PSA_MAC_OPERATION_INIT. + * -# Call psa_mac_sign_setup() to specify the algorithm and key. + * -# Call psa_mac_update() zero, one or more times, passing a fragment + * of the message each time. The MAC that is calculated is the MAC + * of the concatenation of these messages in order. + * -# At the end of the message, call psa_mac_sign_finish() to finish + * calculating the MAC value and retrieve it. + * + * If an error occurs at any step after a call to psa_mac_sign_setup(), the + * operation will need to be reset by a call to psa_mac_abort(). The + * application may call psa_mac_abort() at any time after the operation + * has been initialized. + * + * After a successful call to psa_mac_sign_setup(), the application must + * eventually terminate the operation through one of the following methods: + * - A successful call to psa_mac_sign_finish(). + * - A call to psa_mac_abort(). + * + * \param[in,out] operation The operation object to set up. It must have + * been initialized as per the documentation for + * #psa_mac_operation_t and not yet in use. + * \param key Identifier of the key to use for the operation. It + * must remain valid until the operation terminates. + * It must allow the usage PSA_KEY_USAGE_SIGN_MESSAGE. + * \param alg The MAC algorithm to compute (\c PSA_ALG_XXX value + * such that #PSA_ALG_IS_MAC(\p alg) is true). + * + * \retval #PSA_SUCCESS + * Success. + * \retval #PSA_ERROR_INVALID_HANDLE \emptydescription + * \retval #PSA_ERROR_NOT_PERMITTED \emptydescription + * \retval #PSA_ERROR_INVALID_ARGUMENT + * \p key is not compatible with \p alg. + * \retval #PSA_ERROR_NOT_SUPPORTED + * \p alg is not supported or is not a MAC algorithm. + * \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription + * \retval #PSA_ERROR_COMMUNICATION_FAILURE \emptydescription + * \retval #PSA_ERROR_HARDWARE_FAILURE \emptydescription + * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription + * \retval #PSA_ERROR_STORAGE_FAILURE + * The key could not be retrieved from storage. + * \retval #PSA_ERROR_BAD_STATE + * The operation state is not valid (it must be inactive), or + * the library has not been previously initialized by psa_crypto_init(). + * It is implementation-dependent whether a failure to initialize + * results in this error code. + */ +psa_status_t psa_mac_sign_setup(psa_mac_operation_t *operation, + mbedtls_svc_key_id_t key, + psa_algorithm_t alg); + +/** Set up a multipart MAC verification operation. + * + * This function sets up the verification of the MAC + * (message authentication code) of a byte string against an expected value. + * + * The sequence of operations to verify a MAC is as follows: + * -# Allocate an operation object which will be passed to all the functions + * listed here. + * -# Initialize the operation object with one of the methods described in the + * documentation for #psa_mac_operation_t, e.g. #PSA_MAC_OPERATION_INIT. + * -# Call psa_mac_verify_setup() to specify the algorithm and key. + * -# Call psa_mac_update() zero, one or more times, passing a fragment + * of the message each time. The MAC that is calculated is the MAC + * of the concatenation of these messages in order. + * -# At the end of the message, call psa_mac_verify_finish() to finish + * calculating the actual MAC of the message and verify it against + * the expected value. + * + * If an error occurs at any step after a call to psa_mac_verify_setup(), the + * operation will need to be reset by a call to psa_mac_abort(). The + * application may call psa_mac_abort() at any time after the operation + * has been initialized. + * + * After a successful call to psa_mac_verify_setup(), the application must + * eventually terminate the operation through one of the following methods: + * - A successful call to psa_mac_verify_finish(). + * - A call to psa_mac_abort(). + * + * \param[in,out] operation The operation object to set up. It must have + * been initialized as per the documentation for + * #psa_mac_operation_t and not yet in use. + * \param key Identifier of the key to use for the operation. It + * must remain valid until the operation terminates. + * It must allow the usage + * PSA_KEY_USAGE_VERIFY_MESSAGE. + * \param alg The MAC algorithm to compute (\c PSA_ALG_XXX value + * such that #PSA_ALG_IS_MAC(\p alg) is true). + * + * \retval #PSA_SUCCESS + * Success. + * \retval #PSA_ERROR_INVALID_HANDLE \emptydescription + * \retval #PSA_ERROR_NOT_PERMITTED \emptydescription + * \retval #PSA_ERROR_INVALID_ARGUMENT + * \c key is not compatible with \c alg. + * \retval #PSA_ERROR_NOT_SUPPORTED + * \c alg is not supported or is not a MAC algorithm. + * \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription + * \retval #PSA_ERROR_COMMUNICATION_FAILURE \emptydescription + * \retval #PSA_ERROR_HARDWARE_FAILURE \emptydescription + * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription + * \retval #PSA_ERROR_STORAGE_FAILURE + * The key could not be retrieved from storage. + * \retval #PSA_ERROR_BAD_STATE + * The operation state is not valid (it must be inactive), or + * the library has not been previously initialized by psa_crypto_init(). + * It is implementation-dependent whether a failure to initialize + * results in this error code. + */ +psa_status_t psa_mac_verify_setup(psa_mac_operation_t *operation, + mbedtls_svc_key_id_t key, + psa_algorithm_t alg); + +/** Add a message fragment to a multipart MAC operation. + * + * The application must call psa_mac_sign_setup() or psa_mac_verify_setup() + * before calling this function. + * + * If this function returns an error status, the operation enters an error + * state and must be aborted by calling psa_mac_abort(). + * + * \param[in,out] operation Active MAC operation. + * \param[in] input Buffer containing the message fragment to add to + * the MAC calculation. + * \param input_length Size of the \p input buffer in bytes. + * + * \retval #PSA_SUCCESS + * Success. + * \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription + * \retval #PSA_ERROR_COMMUNICATION_FAILURE \emptydescription + * \retval #PSA_ERROR_HARDWARE_FAILURE \emptydescription + * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription + * \retval #PSA_ERROR_STORAGE_FAILURE \emptydescription + * \retval #PSA_ERROR_BAD_STATE + * The operation state is not valid (it must be active), or + * the library has not been previously initialized by psa_crypto_init(). + * It is implementation-dependent whether a failure to initialize + * results in this error code. + */ +psa_status_t psa_mac_update(psa_mac_operation_t *operation, + const uint8_t *input, + size_t input_length); + +/** Finish the calculation of the MAC of a message. + * + * The application must call psa_mac_sign_setup() before calling this function. + * This function calculates the MAC of the message formed by concatenating + * the inputs passed to preceding calls to psa_mac_update(). + * + * When this function returns successfully, the operation becomes inactive. + * If this function returns an error status, the operation enters an error + * state and must be aborted by calling psa_mac_abort(). + * + * \warning Applications should not call this function if they expect + * a specific value for the MAC. Call psa_mac_verify_finish() instead. + * Beware that comparing integrity or authenticity data such as + * MAC values with a function such as \c memcmp is risky + * because the time taken by the comparison may leak information + * about the MAC value which could allow an attacker to guess + * a valid MAC and thereby bypass security controls. + * + * \param[in,out] operation Active MAC operation. + * \param[out] mac Buffer where the MAC value is to be written. + * \param mac_size Size of the \p mac buffer in bytes. + * \param[out] mac_length On success, the number of bytes + * that make up the MAC value. This is always + * #PSA_MAC_LENGTH(\c key_type, \c key_bits, \c alg) + * where \c key_type and \c key_bits are the type and + * bit-size respectively of the key and \c alg is the + * MAC algorithm that is calculated. + * + * \retval #PSA_SUCCESS + * Success. + * \retval #PSA_ERROR_BUFFER_TOO_SMALL + * The size of the \p mac buffer is too small. You can determine a + * sufficient buffer size by calling PSA_MAC_LENGTH(). + * \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription + * \retval #PSA_ERROR_COMMUNICATION_FAILURE \emptydescription + * \retval #PSA_ERROR_HARDWARE_FAILURE \emptydescription + * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription + * \retval #PSA_ERROR_STORAGE_FAILURE \emptydescription + * \retval #PSA_ERROR_BAD_STATE + * The operation state is not valid (it must be an active mac sign + * operation), or the library has not been previously initialized + * by psa_crypto_init(). + * It is implementation-dependent whether a failure to initialize + * results in this error code. + */ +psa_status_t psa_mac_sign_finish(psa_mac_operation_t *operation, + uint8_t *mac, + size_t mac_size, + size_t *mac_length); + +/** Finish the calculation of the MAC of a message and compare it with + * an expected value. + * + * The application must call psa_mac_verify_setup() before calling this function. + * This function calculates the MAC of the message formed by concatenating + * the inputs passed to preceding calls to psa_mac_update(). It then + * compares the calculated MAC with the expected MAC passed as a + * parameter to this function. + * + * When this function returns successfully, the operation becomes inactive. + * If this function returns an error status, the operation enters an error + * state and must be aborted by calling psa_mac_abort(). + * + * \note Implementations shall make the best effort to ensure that the + * comparison between the actual MAC and the expected MAC is performed + * in constant time. + * + * \param[in,out] operation Active MAC operation. + * \param[in] mac Buffer containing the expected MAC value. + * \param mac_length Size of the \p mac buffer in bytes. + * + * \retval #PSA_SUCCESS + * The expected MAC is identical to the actual MAC of the message. + * \retval #PSA_ERROR_INVALID_SIGNATURE + * The MAC of the message was calculated successfully, but it + * differs from the expected MAC. + * \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription + * \retval #PSA_ERROR_COMMUNICATION_FAILURE \emptydescription + * \retval #PSA_ERROR_HARDWARE_FAILURE \emptydescription + * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription + * \retval #PSA_ERROR_STORAGE_FAILURE \emptydescription + * \retval #PSA_ERROR_BAD_STATE + * The operation state is not valid (it must be an active mac verify + * operation), or the library has not been previously initialized + * by psa_crypto_init(). + * It is implementation-dependent whether a failure to initialize + * results in this error code. + */ +psa_status_t psa_mac_verify_finish(psa_mac_operation_t *operation, + const uint8_t *mac, + size_t mac_length); + +/** Abort a MAC operation. + * + * Aborting an operation frees all associated resources except for the + * \p operation structure itself. Once aborted, the operation object + * can be reused for another operation by calling + * psa_mac_sign_setup() or psa_mac_verify_setup() again. + * + * You may call this function any time after the operation object has + * been initialized by one of the methods described in #psa_mac_operation_t. + * + * In particular, calling psa_mac_abort() after the operation has been + * terminated by a call to psa_mac_abort(), psa_mac_sign_finish() or + * psa_mac_verify_finish() is safe and has no effect. + * + * \param[in,out] operation Initialized MAC operation. + * + * \retval #PSA_SUCCESS \emptydescription + * \retval #PSA_ERROR_COMMUNICATION_FAILURE \emptydescription + * \retval #PSA_ERROR_HARDWARE_FAILURE \emptydescription + * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription + * \retval #PSA_ERROR_BAD_STATE + * The library has not been previously initialized by psa_crypto_init(). + * It is implementation-dependent whether a failure to initialize + * results in this error code. + */ +psa_status_t psa_mac_abort(psa_mac_operation_t *operation); + +/**@}*/ + +/** \defgroup cipher Symmetric ciphers + * @{ + */ + +/** Encrypt a message using a symmetric cipher. + * + * This function encrypts a message with a random IV (initialization + * vector). Use the multipart operation interface with a + * #psa_cipher_operation_t object to provide other forms of IV. + * + * \param key Identifier of the key to use for the operation. + * It must allow the usage #PSA_KEY_USAGE_ENCRYPT. + * \param alg The cipher algorithm to compute + * (\c PSA_ALG_XXX value such that + * #PSA_ALG_IS_CIPHER(\p alg) is true). + * \param[in] input Buffer containing the message to encrypt. + * \param input_length Size of the \p input buffer in bytes. + * \param[out] output Buffer where the output is to be written. + * The output contains the IV followed by + * the ciphertext proper. + * \param output_size Size of the \p output buffer in bytes. + * \param[out] output_length On success, the number of bytes + * that make up the output. + * + * \retval #PSA_SUCCESS + * Success. + * \retval #PSA_ERROR_INVALID_HANDLE \emptydescription + * \retval #PSA_ERROR_NOT_PERMITTED \emptydescription + * \retval #PSA_ERROR_INVALID_ARGUMENT + * \p key is not compatible with \p alg. + * \retval #PSA_ERROR_NOT_SUPPORTED + * \p alg is not supported or is not a cipher algorithm. + * \retval #PSA_ERROR_BUFFER_TOO_SMALL \emptydescription + * \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription + * \retval #PSA_ERROR_COMMUNICATION_FAILURE \emptydescription + * \retval #PSA_ERROR_HARDWARE_FAILURE \emptydescription + * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription + * \retval #PSA_ERROR_STORAGE_FAILURE \emptydescription + * \retval #PSA_ERROR_BAD_STATE + * The library has not been previously initialized by psa_crypto_init(). + * It is implementation-dependent whether a failure to initialize + * results in this error code. + */ +psa_status_t psa_cipher_encrypt(mbedtls_svc_key_id_t key, + psa_algorithm_t alg, + const uint8_t *input, + size_t input_length, + uint8_t *output, + size_t output_size, + size_t *output_length); + +/** Decrypt a message using a symmetric cipher. + * + * This function decrypts a message encrypted with a symmetric cipher. + * + * \param key Identifier of the key to use for the operation. + * It must remain valid until the operation + * terminates. It must allow the usage + * #PSA_KEY_USAGE_DECRYPT. + * \param alg The cipher algorithm to compute + * (\c PSA_ALG_XXX value such that + * #PSA_ALG_IS_CIPHER(\p alg) is true). + * \param[in] input Buffer containing the message to decrypt. + * This consists of the IV followed by the + * ciphertext proper. + * \param input_length Size of the \p input buffer in bytes. + * \param[out] output Buffer where the plaintext is to be written. + * \param output_size Size of the \p output buffer in bytes. + * \param[out] output_length On success, the number of bytes + * that make up the output. + * + * \retval #PSA_SUCCESS + * Success. + * \retval #PSA_ERROR_INVALID_HANDLE \emptydescription + * \retval #PSA_ERROR_NOT_PERMITTED \emptydescription + * \retval #PSA_ERROR_INVALID_ARGUMENT + * \p key is not compatible with \p alg. + * \retval #PSA_ERROR_NOT_SUPPORTED + * \p alg is not supported or is not a cipher algorithm. + * \retval #PSA_ERROR_BUFFER_TOO_SMALL \emptydescription + * \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription + * \retval #PSA_ERROR_COMMUNICATION_FAILURE \emptydescription + * \retval #PSA_ERROR_HARDWARE_FAILURE \emptydescription + * \retval #PSA_ERROR_STORAGE_FAILURE \emptydescription + * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription + * \retval #PSA_ERROR_BAD_STATE + * The library has not been previously initialized by psa_crypto_init(). + * It is implementation-dependent whether a failure to initialize + * results in this error code. + */ +psa_status_t psa_cipher_decrypt(mbedtls_svc_key_id_t key, + psa_algorithm_t alg, + const uint8_t *input, + size_t input_length, + uint8_t *output, + size_t output_size, + size_t *output_length); + +/** The type of the state data structure for multipart cipher operations. + * + * Before calling any function on a cipher operation object, the application + * must initialize it by any of the following means: + * - Set the structure to all-bits-zero, for example: + * \code + * psa_cipher_operation_t operation; + * memset(&operation, 0, sizeof(operation)); + * \endcode + * - Initialize the structure to logical zero values, for example: + * \code + * psa_cipher_operation_t operation = {0}; + * \endcode + * - Initialize the structure to the initializer #PSA_CIPHER_OPERATION_INIT, + * for example: + * \code + * psa_cipher_operation_t operation = PSA_CIPHER_OPERATION_INIT; + * \endcode + * - Assign the result of the function psa_cipher_operation_init() + * to the structure, for example: + * \code + * psa_cipher_operation_t operation; + * operation = psa_cipher_operation_init(); + * \endcode + * + * This is an implementation-defined \c struct. Applications should not + * make any assumptions about the content of this structure. + * Implementation details can change in future versions without notice. */ +typedef struct psa_cipher_operation_s psa_cipher_operation_t; + +/** \def PSA_CIPHER_OPERATION_INIT + * + * This macro returns a suitable initializer for a cipher operation object of + * type #psa_cipher_operation_t. + */ + +/** Return an initial value for a cipher operation object. + */ +static psa_cipher_operation_t psa_cipher_operation_init(void); + +/** Set the key for a multipart symmetric encryption operation. + * + * The sequence of operations to encrypt a message with a symmetric cipher + * is as follows: + * -# Allocate an operation object which will be passed to all the functions + * listed here. + * -# Initialize the operation object with one of the methods described in the + * documentation for #psa_cipher_operation_t, e.g. + * #PSA_CIPHER_OPERATION_INIT. + * -# Call psa_cipher_encrypt_setup() to specify the algorithm and key. + * -# Call either psa_cipher_generate_iv() or psa_cipher_set_iv() to + * generate or set the IV (initialization vector). You should use + * psa_cipher_generate_iv() unless the protocol you are implementing + * requires a specific IV value. + * -# Call psa_cipher_update() zero, one or more times, passing a fragment + * of the message each time. + * -# Call psa_cipher_finish(). + * + * If an error occurs at any step after a call to psa_cipher_encrypt_setup(), + * the operation will need to be reset by a call to psa_cipher_abort(). The + * application may call psa_cipher_abort() at any time after the operation + * has been initialized. + * + * After a successful call to psa_cipher_encrypt_setup(), the application must + * eventually terminate the operation. The following events terminate an + * operation: + * - A successful call to psa_cipher_finish(). + * - A call to psa_cipher_abort(). + * + * \param[in,out] operation The operation object to set up. It must have + * been initialized as per the documentation for + * #psa_cipher_operation_t and not yet in use. + * \param key Identifier of the key to use for the operation. + * It must remain valid until the operation + * terminates. It must allow the usage + * #PSA_KEY_USAGE_ENCRYPT. + * \param alg The cipher algorithm to compute + * (\c PSA_ALG_XXX value such that + * #PSA_ALG_IS_CIPHER(\p alg) is true). + * + * \retval #PSA_SUCCESS + * Success. + * \retval #PSA_ERROR_INVALID_HANDLE \emptydescription + * \retval #PSA_ERROR_NOT_PERMITTED \emptydescription + * \retval #PSA_ERROR_INVALID_ARGUMENT + * \p key is not compatible with \p alg. + * \retval #PSA_ERROR_NOT_SUPPORTED + * \p alg is not supported or is not a cipher algorithm. + * \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription + * \retval #PSA_ERROR_COMMUNICATION_FAILURE \emptydescription + * \retval #PSA_ERROR_HARDWARE_FAILURE \emptydescription + * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription + * \retval #PSA_ERROR_STORAGE_FAILURE \emptydescription + * \retval #PSA_ERROR_BAD_STATE + * The operation state is not valid (it must be inactive), or + * the library has not been previously initialized by psa_crypto_init(). + * It is implementation-dependent whether a failure to initialize + * results in this error code. + */ +psa_status_t psa_cipher_encrypt_setup(psa_cipher_operation_t *operation, + mbedtls_svc_key_id_t key, + psa_algorithm_t alg); + +/** Set the key for a multipart symmetric decryption operation. + * + * The sequence of operations to decrypt a message with a symmetric cipher + * is as follows: + * -# Allocate an operation object which will be passed to all the functions + * listed here. + * -# Initialize the operation object with one of the methods described in the + * documentation for #psa_cipher_operation_t, e.g. + * #PSA_CIPHER_OPERATION_INIT. + * -# Call psa_cipher_decrypt_setup() to specify the algorithm and key. + * -# Call psa_cipher_set_iv() with the IV (initialization vector) for the + * decryption. If the IV is prepended to the ciphertext, you can call + * psa_cipher_update() on a buffer containing the IV followed by the + * beginning of the message. + * -# Call psa_cipher_update() zero, one or more times, passing a fragment + * of the message each time. + * -# Call psa_cipher_finish(). + * + * If an error occurs at any step after a call to psa_cipher_decrypt_setup(), + * the operation will need to be reset by a call to psa_cipher_abort(). The + * application may call psa_cipher_abort() at any time after the operation + * has been initialized. + * + * After a successful call to psa_cipher_decrypt_setup(), the application must + * eventually terminate the operation. The following events terminate an + * operation: + * - A successful call to psa_cipher_finish(). + * - A call to psa_cipher_abort(). + * + * \param[in,out] operation The operation object to set up. It must have + * been initialized as per the documentation for + * #psa_cipher_operation_t and not yet in use. + * \param key Identifier of the key to use for the operation. + * It must remain valid until the operation + * terminates. It must allow the usage + * #PSA_KEY_USAGE_DECRYPT. + * \param alg The cipher algorithm to compute + * (\c PSA_ALG_XXX value such that + * #PSA_ALG_IS_CIPHER(\p alg) is true). + * + * \retval #PSA_SUCCESS + * Success. + * \retval #PSA_ERROR_INVALID_HANDLE \emptydescription + * \retval #PSA_ERROR_NOT_PERMITTED \emptydescription + * \retval #PSA_ERROR_INVALID_ARGUMENT + * \p key is not compatible with \p alg. + * \retval #PSA_ERROR_NOT_SUPPORTED + * \p alg is not supported or is not a cipher algorithm. + * \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription + * \retval #PSA_ERROR_COMMUNICATION_FAILURE \emptydescription + * \retval #PSA_ERROR_HARDWARE_FAILURE \emptydescription + * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription + * \retval #PSA_ERROR_STORAGE_FAILURE \emptydescription + * \retval #PSA_ERROR_BAD_STATE + * The operation state is not valid (it must be inactive), or + * the library has not been previously initialized by psa_crypto_init(). + * It is implementation-dependent whether a failure to initialize + * results in this error code. + */ +psa_status_t psa_cipher_decrypt_setup(psa_cipher_operation_t *operation, + mbedtls_svc_key_id_t key, + psa_algorithm_t alg); + +/** Generate an IV for a symmetric encryption operation. + * + * This function generates a random IV (initialization vector), nonce + * or initial counter value for the encryption operation as appropriate + * for the chosen algorithm, key type and key size. + * + * The application must call psa_cipher_encrypt_setup() before + * calling this function. + * + * If this function returns an error status, the operation enters an error + * state and must be aborted by calling psa_cipher_abort(). + * + * \param[in,out] operation Active cipher operation. + * \param[out] iv Buffer where the generated IV is to be written. + * \param iv_size Size of the \p iv buffer in bytes. + * \param[out] iv_length On success, the number of bytes of the + * generated IV. + * + * \retval #PSA_SUCCESS + * Success. + * \retval #PSA_ERROR_BUFFER_TOO_SMALL + * The size of the \p iv buffer is too small. + * \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription + * \retval #PSA_ERROR_COMMUNICATION_FAILURE \emptydescription + * \retval #PSA_ERROR_HARDWARE_FAILURE \emptydescription + * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription + * \retval #PSA_ERROR_STORAGE_FAILURE \emptydescription + * \retval #PSA_ERROR_BAD_STATE + * The operation state is not valid (it must be active, with no IV set), + * or the library has not been previously initialized + * by psa_crypto_init(). + * It is implementation-dependent whether a failure to initialize + * results in this error code. + */ +psa_status_t psa_cipher_generate_iv(psa_cipher_operation_t *operation, + uint8_t *iv, + size_t iv_size, + size_t *iv_length); + +/** Set the IV for a symmetric encryption or decryption operation. + * + * This function sets the IV (initialization vector), nonce + * or initial counter value for the encryption or decryption operation. + * + * The application must call psa_cipher_encrypt_setup() before + * calling this function. + * + * If this function returns an error status, the operation enters an error + * state and must be aborted by calling psa_cipher_abort(). + * + * \note When encrypting, applications should use psa_cipher_generate_iv() + * instead of this function, unless implementing a protocol that requires + * a non-random IV. + * + * \param[in,out] operation Active cipher operation. + * \param[in] iv Buffer containing the IV to use. + * \param iv_length Size of the IV in bytes. + * + * \retval #PSA_SUCCESS + * Success. + * \retval #PSA_ERROR_INVALID_ARGUMENT + * The size of \p iv is not acceptable for the chosen algorithm, + * or the chosen algorithm does not use an IV. + * \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription + * \retval #PSA_ERROR_COMMUNICATION_FAILURE \emptydescription + * \retval #PSA_ERROR_HARDWARE_FAILURE \emptydescription + * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription + * \retval #PSA_ERROR_STORAGE_FAILURE \emptydescription + * \retval #PSA_ERROR_BAD_STATE + * The operation state is not valid (it must be an active cipher + * encrypt operation, with no IV set), or the library has not been + * previously initialized by psa_crypto_init(). + * It is implementation-dependent whether a failure to initialize + * results in this error code. + */ +psa_status_t psa_cipher_set_iv(psa_cipher_operation_t *operation, + const uint8_t *iv, + size_t iv_length); + +/** Encrypt or decrypt a message fragment in an active cipher operation. + * + * Before calling this function, you must: + * 1. Call either psa_cipher_encrypt_setup() or psa_cipher_decrypt_setup(). + * The choice of setup function determines whether this function + * encrypts or decrypts its input. + * 2. If the algorithm requires an IV, call psa_cipher_generate_iv() + * (recommended when encrypting) or psa_cipher_set_iv(). + * + * If this function returns an error status, the operation enters an error + * state and must be aborted by calling psa_cipher_abort(). + * + * \param[in,out] operation Active cipher operation. + * \param[in] input Buffer containing the message fragment to + * encrypt or decrypt. + * \param input_length Size of the \p input buffer in bytes. + * \param[out] output Buffer where the output is to be written. + * \param output_size Size of the \p output buffer in bytes. + * \param[out] output_length On success, the number of bytes + * that make up the returned output. + * + * \retval #PSA_SUCCESS + * Success. + * \retval #PSA_ERROR_BUFFER_TOO_SMALL + * The size of the \p output buffer is too small. + * \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription + * \retval #PSA_ERROR_COMMUNICATION_FAILURE \emptydescription + * \retval #PSA_ERROR_HARDWARE_FAILURE \emptydescription + * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription + * \retval #PSA_ERROR_STORAGE_FAILURE \emptydescription + * \retval #PSA_ERROR_BAD_STATE + * The operation state is not valid (it must be active, with an IV set + * if required for the algorithm), or the library has not been + * previously initialized by psa_crypto_init(). + * It is implementation-dependent whether a failure to initialize + * results in this error code. + */ +psa_status_t psa_cipher_update(psa_cipher_operation_t *operation, + const uint8_t *input, + size_t input_length, + uint8_t *output, + size_t output_size, + size_t *output_length); + +/** Finish encrypting or decrypting a message in a cipher operation. + * + * The application must call psa_cipher_encrypt_setup() or + * psa_cipher_decrypt_setup() before calling this function. The choice + * of setup function determines whether this function encrypts or + * decrypts its input. + * + * This function finishes the encryption or decryption of the message + * formed by concatenating the inputs passed to preceding calls to + * psa_cipher_update(). + * + * When this function returns successfully, the operation becomes inactive. + * If this function returns an error status, the operation enters an error + * state and must be aborted by calling psa_cipher_abort(). + * + * \param[in,out] operation Active cipher operation. + * \param[out] output Buffer where the output is to be written. + * \param output_size Size of the \p output buffer in bytes. + * \param[out] output_length On success, the number of bytes + * that make up the returned output. + * + * \retval #PSA_SUCCESS + * Success. + * \retval #PSA_ERROR_INVALID_ARGUMENT + * The total input size passed to this operation is not valid for + * this particular algorithm. For example, the algorithm is a based + * on block cipher and requires a whole number of blocks, but the + * total input size is not a multiple of the block size. + * \retval #PSA_ERROR_INVALID_PADDING + * This is a decryption operation for an algorithm that includes + * padding, and the ciphertext does not contain valid padding. + * \retval #PSA_ERROR_BUFFER_TOO_SMALL + * The size of the \p output buffer is too small. + * \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription + * \retval #PSA_ERROR_COMMUNICATION_FAILURE \emptydescription + * \retval #PSA_ERROR_HARDWARE_FAILURE \emptydescription + * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription + * \retval #PSA_ERROR_STORAGE_FAILURE \emptydescription + * \retval #PSA_ERROR_BAD_STATE + * The operation state is not valid (it must be active, with an IV set + * if required for the algorithm), or the library has not been + * previously initialized by psa_crypto_init(). + * It is implementation-dependent whether a failure to initialize + * results in this error code. + */ +psa_status_t psa_cipher_finish(psa_cipher_operation_t *operation, + uint8_t *output, + size_t output_size, + size_t *output_length); + +/** Abort a cipher operation. + * + * Aborting an operation frees all associated resources except for the + * \p operation structure itself. Once aborted, the operation object + * can be reused for another operation by calling + * psa_cipher_encrypt_setup() or psa_cipher_decrypt_setup() again. + * + * You may call this function any time after the operation object has + * been initialized as described in #psa_cipher_operation_t. + * + * In particular, calling psa_cipher_abort() after the operation has been + * terminated by a call to psa_cipher_abort() or psa_cipher_finish() + * is safe and has no effect. + * + * \param[in,out] operation Initialized cipher operation. + * + * \retval #PSA_SUCCESS \emptydescription + * \retval #PSA_ERROR_COMMUNICATION_FAILURE \emptydescription + * \retval #PSA_ERROR_HARDWARE_FAILURE \emptydescription + * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription + * \retval #PSA_ERROR_BAD_STATE + * The library has not been previously initialized by psa_crypto_init(). + * It is implementation-dependent whether a failure to initialize + * results in this error code. + */ +psa_status_t psa_cipher_abort(psa_cipher_operation_t *operation); + +/**@}*/ + +/** \defgroup aead Authenticated encryption with associated data (AEAD) + * @{ + */ + +/** Process an authenticated encryption operation. + * + * \param key Identifier of the key to use for the + * operation. It must allow the usage + * #PSA_KEY_USAGE_ENCRYPT. + * \param alg The AEAD algorithm to compute + * (\c PSA_ALG_XXX value such that + * #PSA_ALG_IS_AEAD(\p alg) is true). + * \param[in] nonce Nonce or IV to use. + * \param nonce_length Size of the \p nonce buffer in bytes. + * \param[in] additional_data Additional data that will be authenticated + * but not encrypted. + * \param additional_data_length Size of \p additional_data in bytes. + * \param[in] plaintext Data that will be authenticated and + * encrypted. + * \param plaintext_length Size of \p plaintext in bytes. + * \param[out] ciphertext Output buffer for the authenticated and + * encrypted data. The additional data is not + * part of this output. For algorithms where the + * encrypted data and the authentication tag + * are defined as separate outputs, the + * authentication tag is appended to the + * encrypted data. + * \param ciphertext_size Size of the \p ciphertext buffer in bytes. + * This must be appropriate for the selected + * algorithm and key: + * - A sufficient output size is + * #PSA_AEAD_ENCRYPT_OUTPUT_SIZE(\c key_type, + * \p alg, \p plaintext_length) where + * \c key_type is the type of \p key. + * - #PSA_AEAD_ENCRYPT_OUTPUT_MAX_SIZE(\p + * plaintext_length) evaluates to the maximum + * ciphertext size of any supported AEAD + * encryption. + * \param[out] ciphertext_length On success, the size of the output + * in the \p ciphertext buffer. + * + * \retval #PSA_SUCCESS + * Success. + * \retval #PSA_ERROR_INVALID_HANDLE \emptydescription + * \retval #PSA_ERROR_NOT_PERMITTED \emptydescription + * \retval #PSA_ERROR_INVALID_ARGUMENT + * \p key is not compatible with \p alg. + * \retval #PSA_ERROR_NOT_SUPPORTED + * \p alg is not supported or is not an AEAD algorithm. + * \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription + * \retval #PSA_ERROR_BUFFER_TOO_SMALL + * \p ciphertext_size is too small. + * #PSA_AEAD_ENCRYPT_OUTPUT_SIZE(\c key_type, \p alg, + * \p plaintext_length) or + * #PSA_AEAD_ENCRYPT_OUTPUT_MAX_SIZE(\p plaintext_length) can be used to + * determine the required buffer size. + * \retval #PSA_ERROR_COMMUNICATION_FAILURE \emptydescription + * \retval #PSA_ERROR_HARDWARE_FAILURE \emptydescription + * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription + * \retval #PSA_ERROR_STORAGE_FAILURE \emptydescription + * \retval #PSA_ERROR_BAD_STATE + * The library has not been previously initialized by psa_crypto_init(). + * It is implementation-dependent whether a failure to initialize + * results in this error code. + */ +psa_status_t psa_aead_encrypt(mbedtls_svc_key_id_t key, + psa_algorithm_t alg, + const uint8_t *nonce, + size_t nonce_length, + const uint8_t *additional_data, + size_t additional_data_length, + const uint8_t *plaintext, + size_t plaintext_length, + uint8_t *ciphertext, + size_t ciphertext_size, + size_t *ciphertext_length); + +/** Process an authenticated decryption operation. + * + * \param key Identifier of the key to use for the + * operation. It must allow the usage + * #PSA_KEY_USAGE_DECRYPT. + * \param alg The AEAD algorithm to compute + * (\c PSA_ALG_XXX value such that + * #PSA_ALG_IS_AEAD(\p alg) is true). + * \param[in] nonce Nonce or IV to use. + * \param nonce_length Size of the \p nonce buffer in bytes. + * \param[in] additional_data Additional data that has been authenticated + * but not encrypted. + * \param additional_data_length Size of \p additional_data in bytes. + * \param[in] ciphertext Data that has been authenticated and + * encrypted. For algorithms where the + * encrypted data and the authentication tag + * are defined as separate inputs, the buffer + * must contain the encrypted data followed + * by the authentication tag. + * \param ciphertext_length Size of \p ciphertext in bytes. + * \param[out] plaintext Output buffer for the decrypted data. + * \param plaintext_size Size of the \p plaintext buffer in bytes. + * This must be appropriate for the selected + * algorithm and key: + * - A sufficient output size is + * #PSA_AEAD_DECRYPT_OUTPUT_SIZE(\c key_type, + * \p alg, \p ciphertext_length) where + * \c key_type is the type of \p key. + * - #PSA_AEAD_DECRYPT_OUTPUT_MAX_SIZE(\p + * ciphertext_length) evaluates to the maximum + * plaintext size of any supported AEAD + * decryption. + * \param[out] plaintext_length On success, the size of the output + * in the \p plaintext buffer. + * + * \retval #PSA_SUCCESS + * Success. + * \retval #PSA_ERROR_INVALID_HANDLE \emptydescription + * \retval #PSA_ERROR_INVALID_SIGNATURE + * The ciphertext is not authentic. + * \retval #PSA_ERROR_NOT_PERMITTED \emptydescription + * \retval #PSA_ERROR_INVALID_ARGUMENT + * \p key is not compatible with \p alg. + * \retval #PSA_ERROR_NOT_SUPPORTED + * \p alg is not supported or is not an AEAD algorithm. + * \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription + * \retval #PSA_ERROR_BUFFER_TOO_SMALL + * \p plaintext_size is too small. + * #PSA_AEAD_DECRYPT_OUTPUT_SIZE(\c key_type, \p alg, + * \p ciphertext_length) or + * #PSA_AEAD_DECRYPT_OUTPUT_MAX_SIZE(\p ciphertext_length) can be used + * to determine the required buffer size. + * \retval #PSA_ERROR_COMMUNICATION_FAILURE \emptydescription + * \retval #PSA_ERROR_HARDWARE_FAILURE \emptydescription + * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription + * \retval #PSA_ERROR_STORAGE_FAILURE \emptydescription + * \retval #PSA_ERROR_BAD_STATE + * The library has not been previously initialized by psa_crypto_init(). + * It is implementation-dependent whether a failure to initialize + * results in this error code. + */ +psa_status_t psa_aead_decrypt(mbedtls_svc_key_id_t key, + psa_algorithm_t alg, + const uint8_t *nonce, + size_t nonce_length, + const uint8_t *additional_data, + size_t additional_data_length, + const uint8_t *ciphertext, + size_t ciphertext_length, + uint8_t *plaintext, + size_t plaintext_size, + size_t *plaintext_length); + +/** The type of the state data structure for multipart AEAD operations. + * + * Before calling any function on an AEAD operation object, the application + * must initialize it by any of the following means: + * - Set the structure to all-bits-zero, for example: + * \code + * psa_aead_operation_t operation; + * memset(&operation, 0, sizeof(operation)); + * \endcode + * - Initialize the structure to logical zero values, for example: + * \code + * psa_aead_operation_t operation = {0}; + * \endcode + * - Initialize the structure to the initializer #PSA_AEAD_OPERATION_INIT, + * for example: + * \code + * psa_aead_operation_t operation = PSA_AEAD_OPERATION_INIT; + * \endcode + * - Assign the result of the function psa_aead_operation_init() + * to the structure, for example: + * \code + * psa_aead_operation_t operation; + * operation = psa_aead_operation_init(); + * \endcode + * + * This is an implementation-defined \c struct. Applications should not + * make any assumptions about the content of this structure. + * Implementation details can change in future versions without notice. */ +typedef struct psa_aead_operation_s psa_aead_operation_t; + +/** \def PSA_AEAD_OPERATION_INIT + * + * This macro returns a suitable initializer for an AEAD operation object of + * type #psa_aead_operation_t. + */ + +/** Return an initial value for an AEAD operation object. + */ +static psa_aead_operation_t psa_aead_operation_init(void); + +/** Set the key for a multipart authenticated encryption operation. + * + * The sequence of operations to encrypt a message with authentication + * is as follows: + * -# Allocate an operation object which will be passed to all the functions + * listed here. + * -# Initialize the operation object with one of the methods described in the + * documentation for #psa_aead_operation_t, e.g. + * #PSA_AEAD_OPERATION_INIT. + * -# Call psa_aead_encrypt_setup() to specify the algorithm and key. + * -# If needed, call psa_aead_set_lengths() to specify the length of the + * inputs to the subsequent calls to psa_aead_update_ad() and + * psa_aead_update(). See the documentation of psa_aead_set_lengths() + * for details. + * -# Call either psa_aead_generate_nonce() or psa_aead_set_nonce() to + * generate or set the nonce. You should use + * psa_aead_generate_nonce() unless the protocol you are implementing + * requires a specific nonce value. + * -# Call psa_aead_update_ad() zero, one or more times, passing a fragment + * of the non-encrypted additional authenticated data each time. + * -# Call psa_aead_update() zero, one or more times, passing a fragment + * of the message to encrypt each time. + * -# Call psa_aead_finish(). + * + * If an error occurs at any step after a call to psa_aead_encrypt_setup(), + * the operation will need to be reset by a call to psa_aead_abort(). The + * application may call psa_aead_abort() at any time after the operation + * has been initialized. + * + * After a successful call to psa_aead_encrypt_setup(), the application must + * eventually terminate the operation. The following events terminate an + * operation: + * - A successful call to psa_aead_finish(). + * - A call to psa_aead_abort(). + * + * \param[in,out] operation The operation object to set up. It must have + * been initialized as per the documentation for + * #psa_aead_operation_t and not yet in use. + * \param key Identifier of the key to use for the operation. + * It must remain valid until the operation + * terminates. It must allow the usage + * #PSA_KEY_USAGE_ENCRYPT. + * \param alg The AEAD algorithm to compute + * (\c PSA_ALG_XXX value such that + * #PSA_ALG_IS_AEAD(\p alg) is true). + * + * \retval #PSA_SUCCESS + * Success. + * \retval #PSA_ERROR_BAD_STATE + * The operation state is not valid (it must be inactive), or + * the library has not been previously initialized by psa_crypto_init(). + * \retval #PSA_ERROR_INVALID_HANDLE \emptydescription + * \retval #PSA_ERROR_NOT_PERMITTED \emptydescription + * \retval #PSA_ERROR_INVALID_ARGUMENT + * \p key is not compatible with \p alg. + * \retval #PSA_ERROR_NOT_SUPPORTED + * \p alg is not supported or is not an AEAD algorithm. + * \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription + * \retval #PSA_ERROR_COMMUNICATION_FAILURE \emptydescription + * \retval #PSA_ERROR_HARDWARE_FAILURE \emptydescription + * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription + * \retval #PSA_ERROR_STORAGE_FAILURE + * The library has not been previously initialized by psa_crypto_init(). + * It is implementation-dependent whether a failure to initialize + * results in this error code. + */ +psa_status_t psa_aead_encrypt_setup(psa_aead_operation_t *operation, + mbedtls_svc_key_id_t key, + psa_algorithm_t alg); + +/** Set the key for a multipart authenticated decryption operation. + * + * The sequence of operations to decrypt a message with authentication + * is as follows: + * -# Allocate an operation object which will be passed to all the functions + * listed here. + * -# Initialize the operation object with one of the methods described in the + * documentation for #psa_aead_operation_t, e.g. + * #PSA_AEAD_OPERATION_INIT. + * -# Call psa_aead_decrypt_setup() to specify the algorithm and key. + * -# If needed, call psa_aead_set_lengths() to specify the length of the + * inputs to the subsequent calls to psa_aead_update_ad() and + * psa_aead_update(). See the documentation of psa_aead_set_lengths() + * for details. + * -# Call psa_aead_set_nonce() with the nonce for the decryption. + * -# Call psa_aead_update_ad() zero, one or more times, passing a fragment + * of the non-encrypted additional authenticated data each time. + * -# Call psa_aead_update() zero, one or more times, passing a fragment + * of the ciphertext to decrypt each time. + * -# Call psa_aead_verify(). + * + * If an error occurs at any step after a call to psa_aead_decrypt_setup(), + * the operation will need to be reset by a call to psa_aead_abort(). The + * application may call psa_aead_abort() at any time after the operation + * has been initialized. + * + * After a successful call to psa_aead_decrypt_setup(), the application must + * eventually terminate the operation. The following events terminate an + * operation: + * - A successful call to psa_aead_verify(). + * - A call to psa_aead_abort(). + * + * \param[in,out] operation The operation object to set up. It must have + * been initialized as per the documentation for + * #psa_aead_operation_t and not yet in use. + * \param key Identifier of the key to use for the operation. + * It must remain valid until the operation + * terminates. It must allow the usage + * #PSA_KEY_USAGE_DECRYPT. + * \param alg The AEAD algorithm to compute + * (\c PSA_ALG_XXX value such that + * #PSA_ALG_IS_AEAD(\p alg) is true). + * + * \retval #PSA_SUCCESS + * Success. + * \retval #PSA_ERROR_INVALID_HANDLE \emptydescription + * \retval #PSA_ERROR_NOT_PERMITTED \emptydescription + * \retval #PSA_ERROR_INVALID_ARGUMENT + * \p key is not compatible with \p alg. + * \retval #PSA_ERROR_NOT_SUPPORTED + * \p alg is not supported or is not an AEAD algorithm. + * \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription + * \retval #PSA_ERROR_COMMUNICATION_FAILURE \emptydescription + * \retval #PSA_ERROR_HARDWARE_FAILURE \emptydescription + * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription + * \retval #PSA_ERROR_STORAGE_FAILURE \emptydescription + * \retval #PSA_ERROR_BAD_STATE + * The operation state is not valid (it must be inactive), or the + * library has not been previously initialized by psa_crypto_init(). + * It is implementation-dependent whether a failure to initialize + * results in this error code. + */ +psa_status_t psa_aead_decrypt_setup(psa_aead_operation_t *operation, + mbedtls_svc_key_id_t key, + psa_algorithm_t alg); + +/** Generate a random nonce for an authenticated encryption operation. + * + * This function generates a random nonce for the authenticated encryption + * operation with an appropriate size for the chosen algorithm, key type + * and key size. + * + * The application must call psa_aead_encrypt_setup() before + * calling this function. + * + * If this function returns an error status, the operation enters an error + * state and must be aborted by calling psa_aead_abort(). + * + * \param[in,out] operation Active AEAD operation. + * \param[out] nonce Buffer where the generated nonce is to be + * written. + * \param nonce_size Size of the \p nonce buffer in bytes. + * \param[out] nonce_length On success, the number of bytes of the + * generated nonce. + * + * \retval #PSA_SUCCESS + * Success. + * \retval #PSA_ERROR_BUFFER_TOO_SMALL + * The size of the \p nonce buffer is too small. + * \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription + * \retval #PSA_ERROR_COMMUNICATION_FAILURE \emptydescription + * \retval #PSA_ERROR_HARDWARE_FAILURE \emptydescription + * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription + * \retval #PSA_ERROR_STORAGE_FAILURE \emptydescription + * \retval #PSA_ERROR_BAD_STATE + * The operation state is not valid (it must be an active aead encrypt + * operation, with no nonce set), or the library has not been + * previously initialized by psa_crypto_init(). + * It is implementation-dependent whether a failure to initialize + * results in this error code. + */ +psa_status_t psa_aead_generate_nonce(psa_aead_operation_t *operation, + uint8_t *nonce, + size_t nonce_size, + size_t *nonce_length); + +/** Set the nonce for an authenticated encryption or decryption operation. + * + * This function sets the nonce for the authenticated + * encryption or decryption operation. + * + * The application must call psa_aead_encrypt_setup() or + * psa_aead_decrypt_setup() before calling this function. + * + * If this function returns an error status, the operation enters an error + * state and must be aborted by calling psa_aead_abort(). + * + * \note When encrypting, applications should use psa_aead_generate_nonce() + * instead of this function, unless implementing a protocol that requires + * a non-random IV. + * + * \param[in,out] operation Active AEAD operation. + * \param[in] nonce Buffer containing the nonce to use. + * \param nonce_length Size of the nonce in bytes. + * + * \retval #PSA_SUCCESS + * Success. + * \retval #PSA_ERROR_INVALID_ARGUMENT + * The size of \p nonce is not acceptable for the chosen algorithm. + * \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription + * \retval #PSA_ERROR_COMMUNICATION_FAILURE \emptydescription + * \retval #PSA_ERROR_HARDWARE_FAILURE \emptydescription + * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription + * \retval #PSA_ERROR_STORAGE_FAILURE \emptydescription + * \retval #PSA_ERROR_BAD_STATE + * The operation state is not valid (it must be active, with no nonce + * set), or the library has not been previously initialized + * by psa_crypto_init(). + * It is implementation-dependent whether a failure to initialize + * results in this error code. + */ +psa_status_t psa_aead_set_nonce(psa_aead_operation_t *operation, + const uint8_t *nonce, + size_t nonce_length); + +/** Declare the lengths of the message and additional data for AEAD. + * + * The application must call this function before calling + * psa_aead_update_ad() or psa_aead_update() if the algorithm for + * the operation requires it. If the algorithm does not require it, + * calling this function is optional, but if this function is called + * then the implementation must enforce the lengths. + * + * You may call this function before or after setting the nonce with + * psa_aead_set_nonce() or psa_aead_generate_nonce(). + * + * - For #PSA_ALG_CCM, calling this function is required. + * - For the other AEAD algorithms defined in this specification, calling + * this function is not required. + * - For vendor-defined algorithm, refer to the vendor documentation. + * + * If this function returns an error status, the operation enters an error + * state and must be aborted by calling psa_aead_abort(). + * + * \param[in,out] operation Active AEAD operation. + * \param ad_length Size of the non-encrypted additional + * authenticated data in bytes. + * \param plaintext_length Size of the plaintext to encrypt in bytes. + * + * \retval #PSA_SUCCESS + * Success. + * \retval #PSA_ERROR_INVALID_ARGUMENT + * At least one of the lengths is not acceptable for the chosen + * algorithm. + * \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription + * \retval #PSA_ERROR_COMMUNICATION_FAILURE \emptydescription + * \retval #PSA_ERROR_HARDWARE_FAILURE \emptydescription + * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription + * \retval #PSA_ERROR_BAD_STATE + * The operation state is not valid (it must be active, and + * psa_aead_update_ad() and psa_aead_update() must not have been + * called yet), or the library has not been previously initialized + * by psa_crypto_init(). + * It is implementation-dependent whether a failure to initialize + * results in this error code. + */ +psa_status_t psa_aead_set_lengths(psa_aead_operation_t *operation, + size_t ad_length, + size_t plaintext_length); + +/** Pass additional data to an active AEAD operation. + * + * Additional data is authenticated, but not encrypted. + * + * You may call this function multiple times to pass successive fragments + * of the additional data. You may not call this function after passing + * data to encrypt or decrypt with psa_aead_update(). + * + * Before calling this function, you must: + * 1. Call either psa_aead_encrypt_setup() or psa_aead_decrypt_setup(). + * 2. Set the nonce with psa_aead_generate_nonce() or psa_aead_set_nonce(). + * + * If this function returns an error status, the operation enters an error + * state and must be aborted by calling psa_aead_abort(). + * + * \warning When decrypting, until psa_aead_verify() has returned #PSA_SUCCESS, + * there is no guarantee that the input is valid. Therefore, until + * you have called psa_aead_verify() and it has returned #PSA_SUCCESS, + * treat the input as untrusted and prepare to undo any action that + * depends on the input if psa_aead_verify() returns an error status. + * + * \param[in,out] operation Active AEAD operation. + * \param[in] input Buffer containing the fragment of + * additional data. + * \param input_length Size of the \p input buffer in bytes. + * + * \retval #PSA_SUCCESS + * Success. + * \retval #PSA_ERROR_INVALID_ARGUMENT + * The total input length overflows the additional data length that + * was previously specified with psa_aead_set_lengths(). + * \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription + * \retval #PSA_ERROR_COMMUNICATION_FAILURE \emptydescription + * \retval #PSA_ERROR_HARDWARE_FAILURE \emptydescription + * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription + * \retval #PSA_ERROR_STORAGE_FAILURE \emptydescription + * \retval #PSA_ERROR_BAD_STATE + * The operation state is not valid (it must be active, have a nonce + * set, have lengths set if required by the algorithm, and + * psa_aead_update() must not have been called yet), or the library + * has not been previously initialized by psa_crypto_init(). + * It is implementation-dependent whether a failure to initialize + * results in this error code. + */ +psa_status_t psa_aead_update_ad(psa_aead_operation_t *operation, + const uint8_t *input, + size_t input_length); + +/** Encrypt or decrypt a message fragment in an active AEAD operation. + * + * Before calling this function, you must: + * 1. Call either psa_aead_encrypt_setup() or psa_aead_decrypt_setup(). + * The choice of setup function determines whether this function + * encrypts or decrypts its input. + * 2. Set the nonce with psa_aead_generate_nonce() or psa_aead_set_nonce(). + * 3. Call psa_aead_update_ad() to pass all the additional data. + * + * If this function returns an error status, the operation enters an error + * state and must be aborted by calling psa_aead_abort(). + * + * \warning When decrypting, until psa_aead_verify() has returned #PSA_SUCCESS, + * there is no guarantee that the input is valid. Therefore, until + * you have called psa_aead_verify() and it has returned #PSA_SUCCESS: + * - Do not use the output in any way other than storing it in a + * confidential location. If you take any action that depends + * on the tentative decrypted data, this action will need to be + * undone if the input turns out not to be valid. Furthermore, + * if an adversary can observe that this action took place + * (for example through timing), they may be able to use this + * fact as an oracle to decrypt any message encrypted with the + * same key. + * - In particular, do not copy the output anywhere but to a + * memory or storage space that you have exclusive access to. + * + * This function does not require the input to be aligned to any + * particular block boundary. If the implementation can only process + * a whole block at a time, it must consume all the input provided, but + * it may delay the end of the corresponding output until a subsequent + * call to psa_aead_update(), psa_aead_finish() or psa_aead_verify() + * provides sufficient input. The amount of data that can be delayed + * in this way is bounded by #PSA_AEAD_UPDATE_OUTPUT_SIZE. + * + * \param[in,out] operation Active AEAD operation. + * \param[in] input Buffer containing the message fragment to + * encrypt or decrypt. + * \param input_length Size of the \p input buffer in bytes. + * \param[out] output Buffer where the output is to be written. + * \param output_size Size of the \p output buffer in bytes. + * This must be appropriate for the selected + * algorithm and key: + * - A sufficient output size is + * #PSA_AEAD_UPDATE_OUTPUT_SIZE(\c key_type, + * \c alg, \p input_length) where + * \c key_type is the type of key and \c alg is + * the algorithm that were used to set up the + * operation. + * - #PSA_AEAD_UPDATE_OUTPUT_MAX_SIZE(\p + * input_length) evaluates to the maximum + * output size of any supported AEAD + * algorithm. + * \param[out] output_length On success, the number of bytes + * that make up the returned output. + * + * \retval #PSA_SUCCESS + * Success. + * \retval #PSA_ERROR_BUFFER_TOO_SMALL + * The size of the \p output buffer is too small. + * #PSA_AEAD_UPDATE_OUTPUT_SIZE(\c key_type, \c alg, \p input_length) or + * #PSA_AEAD_UPDATE_OUTPUT_MAX_SIZE(\p input_length) can be used to + * determine the required buffer size. + * \retval #PSA_ERROR_INVALID_ARGUMENT + * The total length of input to psa_aead_update_ad() so far is + * less than the additional data length that was previously + * specified with psa_aead_set_lengths(), or + * the total input length overflows the plaintext length that + * was previously specified with psa_aead_set_lengths(). + * \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription + * \retval #PSA_ERROR_COMMUNICATION_FAILURE \emptydescription + * \retval #PSA_ERROR_HARDWARE_FAILURE \emptydescription + * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription + * \retval #PSA_ERROR_STORAGE_FAILURE \emptydescription + * \retval #PSA_ERROR_BAD_STATE + * The operation state is not valid (it must be active, have a nonce + * set, and have lengths set if required by the algorithm), or the + * library has not been previously initialized by psa_crypto_init(). + * It is implementation-dependent whether a failure to initialize + * results in this error code. + */ +psa_status_t psa_aead_update(psa_aead_operation_t *operation, + const uint8_t *input, + size_t input_length, + uint8_t *output, + size_t output_size, + size_t *output_length); + +/** Finish encrypting a message in an AEAD operation. + * + * The operation must have been set up with psa_aead_encrypt_setup(). + * + * This function finishes the authentication of the additional data + * formed by concatenating the inputs passed to preceding calls to + * psa_aead_update_ad() with the plaintext formed by concatenating the + * inputs passed to preceding calls to psa_aead_update(). + * + * This function has two output buffers: + * - \p ciphertext contains trailing ciphertext that was buffered from + * preceding calls to psa_aead_update(). + * - \p tag contains the authentication tag. + * + * When this function returns successfully, the operation becomes inactive. + * If this function returns an error status, the operation enters an error + * state and must be aborted by calling psa_aead_abort(). + * + * \param[in,out] operation Active AEAD operation. + * \param[out] ciphertext Buffer where the last part of the ciphertext + * is to be written. + * \param ciphertext_size Size of the \p ciphertext buffer in bytes. + * This must be appropriate for the selected + * algorithm and key: + * - A sufficient output size is + * #PSA_AEAD_FINISH_OUTPUT_SIZE(\c key_type, + * \c alg) where \c key_type is the type of key + * and \c alg is the algorithm that were used to + * set up the operation. + * - #PSA_AEAD_FINISH_OUTPUT_MAX_SIZE evaluates to + * the maximum output size of any supported AEAD + * algorithm. + * \param[out] ciphertext_length On success, the number of bytes of + * returned ciphertext. + * \param[out] tag Buffer where the authentication tag is + * to be written. + * \param tag_size Size of the \p tag buffer in bytes. + * This must be appropriate for the selected + * algorithm and key: + * - The exact tag size is #PSA_AEAD_TAG_LENGTH(\c + * key_type, \c key_bits, \c alg) where + * \c key_type and \c key_bits are the type and + * bit-size of the key, and \c alg is the + * algorithm that were used in the call to + * psa_aead_encrypt_setup(). + * - #PSA_AEAD_TAG_MAX_SIZE evaluates to the + * maximum tag size of any supported AEAD + * algorithm. + * \param[out] tag_length On success, the number of bytes + * that make up the returned tag. + * + * \retval #PSA_SUCCESS + * Success. + * \retval #PSA_ERROR_BUFFER_TOO_SMALL + * The size of the \p ciphertext or \p tag buffer is too small. + * #PSA_AEAD_FINISH_OUTPUT_SIZE(\c key_type, \c alg) or + * #PSA_AEAD_FINISH_OUTPUT_MAX_SIZE can be used to determine the + * required \p ciphertext buffer size. #PSA_AEAD_TAG_LENGTH(\c key_type, + * \c key_bits, \c alg) or #PSA_AEAD_TAG_MAX_SIZE can be used to + * determine the required \p tag buffer size. + * \retval #PSA_ERROR_INVALID_ARGUMENT + * The total length of input to psa_aead_update_ad() so far is + * less than the additional data length that was previously + * specified with psa_aead_set_lengths(), or + * the total length of input to psa_aead_update() so far is + * less than the plaintext length that was previously + * specified with psa_aead_set_lengths(). + * \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription + * \retval #PSA_ERROR_COMMUNICATION_FAILURE \emptydescription + * \retval #PSA_ERROR_HARDWARE_FAILURE \emptydescription + * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription + * \retval #PSA_ERROR_STORAGE_FAILURE \emptydescription + * \retval #PSA_ERROR_BAD_STATE + * The operation state is not valid (it must be an active encryption + * operation with a nonce set), or the library has not been previously + * initialized by psa_crypto_init(). + * It is implementation-dependent whether a failure to initialize + * results in this error code. + */ +psa_status_t psa_aead_finish(psa_aead_operation_t *operation, + uint8_t *ciphertext, + size_t ciphertext_size, + size_t *ciphertext_length, + uint8_t *tag, + size_t tag_size, + size_t *tag_length); + +/** Finish authenticating and decrypting a message in an AEAD operation. + * + * The operation must have been set up with psa_aead_decrypt_setup(). + * + * This function finishes the authenticated decryption of the message + * components: + * + * - The additional data consisting of the concatenation of the inputs + * passed to preceding calls to psa_aead_update_ad(). + * - The ciphertext consisting of the concatenation of the inputs passed to + * preceding calls to psa_aead_update(). + * - The tag passed to this function call. + * + * If the authentication tag is correct, this function outputs any remaining + * plaintext and reports success. If the authentication tag is not correct, + * this function returns #PSA_ERROR_INVALID_SIGNATURE. + * + * When this function returns successfully, the operation becomes inactive. + * If this function returns an error status, the operation enters an error + * state and must be aborted by calling psa_aead_abort(). + * + * \note Implementations shall make the best effort to ensure that the + * comparison between the actual tag and the expected tag is performed + * in constant time. + * + * \param[in,out] operation Active AEAD operation. + * \param[out] plaintext Buffer where the last part of the plaintext + * is to be written. This is the remaining data + * from previous calls to psa_aead_update() + * that could not be processed until the end + * of the input. + * \param plaintext_size Size of the \p plaintext buffer in bytes. + * This must be appropriate for the selected algorithm and key: + * - A sufficient output size is + * #PSA_AEAD_VERIFY_OUTPUT_SIZE(\c key_type, + * \c alg) where \c key_type is the type of key + * and \c alg is the algorithm that were used to + * set up the operation. + * - #PSA_AEAD_VERIFY_OUTPUT_MAX_SIZE evaluates to + * the maximum output size of any supported AEAD + * algorithm. + * \param[out] plaintext_length On success, the number of bytes of + * returned plaintext. + * \param[in] tag Buffer containing the authentication tag. + * \param tag_length Size of the \p tag buffer in bytes. + * + * \retval #PSA_SUCCESS + * Success. + * \retval #PSA_ERROR_INVALID_SIGNATURE + * The calculations were successful, but the authentication tag is + * not correct. + * \retval #PSA_ERROR_BUFFER_TOO_SMALL + * The size of the \p plaintext buffer is too small. + * #PSA_AEAD_VERIFY_OUTPUT_SIZE(\c key_type, \c alg) or + * #PSA_AEAD_VERIFY_OUTPUT_MAX_SIZE can be used to determine the + * required buffer size. + * \retval #PSA_ERROR_INVALID_ARGUMENT + * The total length of input to psa_aead_update_ad() so far is + * less than the additional data length that was previously + * specified with psa_aead_set_lengths(), or + * the total length of input to psa_aead_update() so far is + * less than the plaintext length that was previously + * specified with psa_aead_set_lengths(). + * \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription + * \retval #PSA_ERROR_COMMUNICATION_FAILURE \emptydescription + * \retval #PSA_ERROR_HARDWARE_FAILURE \emptydescription + * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription + * \retval #PSA_ERROR_STORAGE_FAILURE \emptydescription + * \retval #PSA_ERROR_BAD_STATE + * The operation state is not valid (it must be an active decryption + * operation with a nonce set), or the library has not been previously + * initialized by psa_crypto_init(). + * It is implementation-dependent whether a failure to initialize + * results in this error code. + */ +psa_status_t psa_aead_verify(psa_aead_operation_t *operation, + uint8_t *plaintext, + size_t plaintext_size, + size_t *plaintext_length, + const uint8_t *tag, + size_t tag_length); + +/** Abort an AEAD operation. + * + * Aborting an operation frees all associated resources except for the + * \p operation structure itself. Once aborted, the operation object + * can be reused for another operation by calling + * psa_aead_encrypt_setup() or psa_aead_decrypt_setup() again. + * + * You may call this function any time after the operation object has + * been initialized as described in #psa_aead_operation_t. + * + * In particular, calling psa_aead_abort() after the operation has been + * terminated by a call to psa_aead_abort(), psa_aead_finish() or + * psa_aead_verify() is safe and has no effect. + * + * \param[in,out] operation Initialized AEAD operation. + * + * \retval #PSA_SUCCESS \emptydescription + * \retval #PSA_ERROR_COMMUNICATION_FAILURE \emptydescription + * \retval #PSA_ERROR_HARDWARE_FAILURE \emptydescription + * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription + * \retval #PSA_ERROR_BAD_STATE + * The library has not been previously initialized by psa_crypto_init(). + * It is implementation-dependent whether a failure to initialize + * results in this error code. + */ +psa_status_t psa_aead_abort(psa_aead_operation_t *operation); + +/**@}*/ + +/** \defgroup asymmetric Asymmetric cryptography + * @{ + */ + +/** + * \brief Sign a message with a private key. For hash-and-sign algorithms, + * this includes the hashing step. + * + * \note To perform a multi-part hash-and-sign signature algorithm, first use + * a multi-part hash operation and then pass the resulting hash to + * psa_sign_hash(). PSA_ALG_GET_HASH(\p alg) can be used to determine the + * hash algorithm to use. + * + * \param[in] key Identifier of the key to use for the operation. + * It must be an asymmetric key pair. The key must + * allow the usage #PSA_KEY_USAGE_SIGN_MESSAGE. + * \param[in] alg An asymmetric signature algorithm (PSA_ALG_XXX + * value such that #PSA_ALG_IS_SIGN_MESSAGE(\p alg) + * is true), that is compatible with the type of + * \p key. + * \param[in] input The input message to sign. + * \param[in] input_length Size of the \p input buffer in bytes. + * \param[out] signature Buffer where the signature is to be written. + * \param[in] signature_size Size of the \p signature buffer in bytes. This + * must be appropriate for the selected + * algorithm and key: + * - The required signature size is + * #PSA_SIGN_OUTPUT_SIZE(\c key_type, \c key_bits, \p alg) + * where \c key_type and \c key_bits are the type and + * bit-size respectively of key. + * - #PSA_SIGNATURE_MAX_SIZE evaluates to the + * maximum signature size of any supported + * signature algorithm. + * \param[out] signature_length On success, the number of bytes that make up + * the returned signature value. + * + * \retval #PSA_SUCCESS \emptydescription + * \retval #PSA_ERROR_INVALID_HANDLE \emptydescription + * \retval #PSA_ERROR_NOT_PERMITTED + * The key does not have the #PSA_KEY_USAGE_SIGN_MESSAGE flag, + * or it does not permit the requested algorithm. + * \retval #PSA_ERROR_BUFFER_TOO_SMALL + * The size of the \p signature buffer is too small. You can + * determine a sufficient buffer size by calling + * #PSA_SIGN_OUTPUT_SIZE(\c key_type, \c key_bits, \p alg) + * where \c key_type and \c key_bits are the type and bit-size + * respectively of \p key. + * \retval #PSA_ERROR_NOT_SUPPORTED \emptydescription + * \retval #PSA_ERROR_INVALID_ARGUMENT \emptydescription + * \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription + * \retval #PSA_ERROR_COMMUNICATION_FAILURE \emptydescription + * \retval #PSA_ERROR_HARDWARE_FAILURE \emptydescription + * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription + * \retval #PSA_ERROR_STORAGE_FAILURE \emptydescription + * \retval #PSA_ERROR_DATA_CORRUPT \emptydescription + * \retval #PSA_ERROR_DATA_INVALID \emptydescription + * \retval #PSA_ERROR_INSUFFICIENT_ENTROPY \emptydescription + * \retval #PSA_ERROR_BAD_STATE + * The library has not been previously initialized by psa_crypto_init(). + * It is implementation-dependent whether a failure to initialize + * results in this error code. + */ +psa_status_t psa_sign_message(mbedtls_svc_key_id_t key, + psa_algorithm_t alg, + const uint8_t *input, + size_t input_length, + uint8_t *signature, + size_t signature_size, + size_t *signature_length); + +/** \brief Verify the signature of a message with a public key, using + * a hash-and-sign verification algorithm. + * + * \note To perform a multi-part hash-and-sign signature verification + * algorithm, first use a multi-part hash operation to hash the message + * and then pass the resulting hash to psa_verify_hash(). + * PSA_ALG_GET_HASH(\p alg) can be used to determine the hash algorithm + * to use. + * + * \param[in] key Identifier of the key to use for the operation. + * It must be a public key or an asymmetric key + * pair. The key must allow the usage + * #PSA_KEY_USAGE_VERIFY_MESSAGE. + * \param[in] alg An asymmetric signature algorithm (PSA_ALG_XXX + * value such that #PSA_ALG_IS_SIGN_MESSAGE(\p alg) + * is true), that is compatible with the type of + * \p key. + * \param[in] input The message whose signature is to be verified. + * \param[in] input_length Size of the \p input buffer in bytes. + * \param[out] signature Buffer containing the signature to verify. + * \param[in] signature_length Size of the \p signature buffer in bytes. + * + * \retval #PSA_SUCCESS \emptydescription + * \retval #PSA_ERROR_INVALID_HANDLE \emptydescription + * \retval #PSA_ERROR_NOT_PERMITTED + * The key does not have the #PSA_KEY_USAGE_SIGN_MESSAGE flag, + * or it does not permit the requested algorithm. + * \retval #PSA_ERROR_INVALID_SIGNATURE + * The calculation was performed successfully, but the passed signature + * is not a valid signature. + * \retval #PSA_ERROR_NOT_SUPPORTED \emptydescription + * \retval #PSA_ERROR_INVALID_ARGUMENT \emptydescription + * \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription + * \retval #PSA_ERROR_COMMUNICATION_FAILURE \emptydescription + * \retval #PSA_ERROR_HARDWARE_FAILURE \emptydescription + * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription + * \retval #PSA_ERROR_STORAGE_FAILURE \emptydescription + * \retval #PSA_ERROR_DATA_CORRUPT \emptydescription + * \retval #PSA_ERROR_DATA_INVALID \emptydescription + * \retval #PSA_ERROR_BAD_STATE + * The library has not been previously initialized by psa_crypto_init(). + * It is implementation-dependent whether a failure to initialize + * results in this error code. + */ +psa_status_t psa_verify_message(mbedtls_svc_key_id_t key, + psa_algorithm_t alg, + const uint8_t *input, + size_t input_length, + const uint8_t *signature, + size_t signature_length); + +/** + * \brief Sign a hash or short message with a private key. + * + * Note that to perform a hash-and-sign signature algorithm, you must + * first calculate the hash by calling psa_hash_setup(), psa_hash_update() + * and psa_hash_finish(), or alternatively by calling psa_hash_compute(). + * Then pass the resulting hash as the \p hash + * parameter to this function. You can use #PSA_ALG_SIGN_GET_HASH(\p alg) + * to determine the hash algorithm to use. + * + * \param key Identifier of the key to use for the operation. + * It must be an asymmetric key pair. The key must + * allow the usage #PSA_KEY_USAGE_SIGN_HASH. + * \param alg A signature algorithm (PSA_ALG_XXX + * value such that #PSA_ALG_IS_SIGN_HASH(\p alg) + * is true), that is compatible with + * the type of \p key. + * \param[in] hash The hash or message to sign. + * \param hash_length Size of the \p hash buffer in bytes. + * \param[out] signature Buffer where the signature is to be written. + * \param signature_size Size of the \p signature buffer in bytes. + * \param[out] signature_length On success, the number of bytes + * that make up the returned signature value. + * + * \retval #PSA_SUCCESS \emptydescription + * \retval #PSA_ERROR_INVALID_HANDLE \emptydescription + * \retval #PSA_ERROR_NOT_PERMITTED \emptydescription + * \retval #PSA_ERROR_BUFFER_TOO_SMALL + * The size of the \p signature buffer is too small. You can + * determine a sufficient buffer size by calling + * #PSA_SIGN_OUTPUT_SIZE(\c key_type, \c key_bits, \p alg) + * where \c key_type and \c key_bits are the type and bit-size + * respectively of \p key. + * \retval #PSA_ERROR_NOT_SUPPORTED \emptydescription + * \retval #PSA_ERROR_INVALID_ARGUMENT \emptydescription + * \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription + * \retval #PSA_ERROR_COMMUNICATION_FAILURE \emptydescription + * \retval #PSA_ERROR_HARDWARE_FAILURE \emptydescription + * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription + * \retval #PSA_ERROR_STORAGE_FAILURE \emptydescription + * \retval #PSA_ERROR_INSUFFICIENT_ENTROPY \emptydescription + * \retval #PSA_ERROR_BAD_STATE + * The library has not been previously initialized by psa_crypto_init(). + * It is implementation-dependent whether a failure to initialize + * results in this error code. + */ +psa_status_t psa_sign_hash(mbedtls_svc_key_id_t key, + psa_algorithm_t alg, + const uint8_t *hash, + size_t hash_length, + uint8_t *signature, + size_t signature_size, + size_t *signature_length); + +/** + * \brief Verify the signature of a hash or short message using a public key. + * + * Note that to perform a hash-and-sign signature algorithm, you must + * first calculate the hash by calling psa_hash_setup(), psa_hash_update() + * and psa_hash_finish(), or alternatively by calling psa_hash_compute(). + * Then pass the resulting hash as the \p hash + * parameter to this function. You can use #PSA_ALG_SIGN_GET_HASH(\p alg) + * to determine the hash algorithm to use. + * + * \param key Identifier of the key to use for the operation. It + * must be a public key or an asymmetric key pair. The + * key must allow the usage + * #PSA_KEY_USAGE_VERIFY_HASH. + * \param alg A signature algorithm (PSA_ALG_XXX + * value such that #PSA_ALG_IS_SIGN_HASH(\p alg) + * is true), that is compatible with + * the type of \p key. + * \param[in] hash The hash or message whose signature is to be + * verified. + * \param hash_length Size of the \p hash buffer in bytes. + * \param[in] signature Buffer containing the signature to verify. + * \param signature_length Size of the \p signature buffer in bytes. + * + * \retval #PSA_SUCCESS + * The signature is valid. + * \retval #PSA_ERROR_INVALID_HANDLE \emptydescription + * \retval #PSA_ERROR_NOT_PERMITTED \emptydescription + * \retval #PSA_ERROR_INVALID_SIGNATURE + * The calculation was performed successfully, but the passed + * signature is not a valid signature. + * \retval #PSA_ERROR_NOT_SUPPORTED \emptydescription + * \retval #PSA_ERROR_INVALID_ARGUMENT \emptydescription + * \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription + * \retval #PSA_ERROR_COMMUNICATION_FAILURE \emptydescription + * \retval #PSA_ERROR_HARDWARE_FAILURE \emptydescription + * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription + * \retval #PSA_ERROR_STORAGE_FAILURE \emptydescription + * \retval #PSA_ERROR_BAD_STATE + * The library has not been previously initialized by psa_crypto_init(). + * It is implementation-dependent whether a failure to initialize + * results in this error code. + */ +psa_status_t psa_verify_hash(mbedtls_svc_key_id_t key, + psa_algorithm_t alg, + const uint8_t *hash, + size_t hash_length, + const uint8_t *signature, + size_t signature_length); + +/** + * \brief Encrypt a short message with a public key. + * + * \param key Identifier of the key to use for the operation. + * It must be a public key or an asymmetric key + * pair. It must allow the usage + * #PSA_KEY_USAGE_ENCRYPT. + * \param alg An asymmetric encryption algorithm that is + * compatible with the type of \p key. + * \param[in] input The message to encrypt. + * \param input_length Size of the \p input buffer in bytes. + * \param[in] salt A salt or label, if supported by the + * encryption algorithm. + * If the algorithm does not support a + * salt, pass \c NULL. + * If the algorithm supports an optional + * salt and you do not want to pass a salt, + * pass \c NULL. + * + * - For #PSA_ALG_RSA_PKCS1V15_CRYPT, no salt is + * supported. + * \param salt_length Size of the \p salt buffer in bytes. + * If \p salt is \c NULL, pass 0. + * \param[out] output Buffer where the encrypted message is to + * be written. + * \param output_size Size of the \p output buffer in bytes. + * \param[out] output_length On success, the number of bytes + * that make up the returned output. + * + * \retval #PSA_SUCCESS \emptydescription + * \retval #PSA_ERROR_INVALID_HANDLE \emptydescription + * \retval #PSA_ERROR_NOT_PERMITTED \emptydescription + * \retval #PSA_ERROR_BUFFER_TOO_SMALL + * The size of the \p output buffer is too small. You can + * determine a sufficient buffer size by calling + * #PSA_ASYMMETRIC_ENCRYPT_OUTPUT_SIZE(\c key_type, \c key_bits, \p alg) + * where \c key_type and \c key_bits are the type and bit-size + * respectively of \p key. + * \retval #PSA_ERROR_NOT_SUPPORTED \emptydescription + * \retval #PSA_ERROR_INVALID_ARGUMENT \emptydescription + * \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription + * \retval #PSA_ERROR_COMMUNICATION_FAILURE \emptydescription + * \retval #PSA_ERROR_HARDWARE_FAILURE \emptydescription + * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription + * \retval #PSA_ERROR_STORAGE_FAILURE \emptydescription + * \retval #PSA_ERROR_INSUFFICIENT_ENTROPY \emptydescription + * \retval #PSA_ERROR_BAD_STATE + * The library has not been previously initialized by psa_crypto_init(). + * It is implementation-dependent whether a failure to initialize + * results in this error code. + */ +psa_status_t psa_asymmetric_encrypt(mbedtls_svc_key_id_t key, + psa_algorithm_t alg, + const uint8_t *input, + size_t input_length, + const uint8_t *salt, + size_t salt_length, + uint8_t *output, + size_t output_size, + size_t *output_length); + +/** + * \brief Decrypt a short message with a private key. + * + * \param key Identifier of the key to use for the operation. + * It must be an asymmetric key pair. It must + * allow the usage #PSA_KEY_USAGE_DECRYPT. + * \param alg An asymmetric encryption algorithm that is + * compatible with the type of \p key. + * \param[in] input The message to decrypt. + * \param input_length Size of the \p input buffer in bytes. + * \param[in] salt A salt or label, if supported by the + * encryption algorithm. + * If the algorithm does not support a + * salt, pass \c NULL. + * If the algorithm supports an optional + * salt and you do not want to pass a salt, + * pass \c NULL. + * + * - For #PSA_ALG_RSA_PKCS1V15_CRYPT, no salt is + * supported. + * \param salt_length Size of the \p salt buffer in bytes. + * If \p salt is \c NULL, pass 0. + * \param[out] output Buffer where the decrypted message is to + * be written. + * \param output_size Size of the \c output buffer in bytes. + * \param[out] output_length On success, the number of bytes + * that make up the returned output. + * + * \retval #PSA_SUCCESS \emptydescription + * \retval #PSA_ERROR_INVALID_HANDLE \emptydescription + * \retval #PSA_ERROR_NOT_PERMITTED \emptydescription + * \retval #PSA_ERROR_BUFFER_TOO_SMALL + * The size of the \p output buffer is too small. You can + * determine a sufficient buffer size by calling + * #PSA_ASYMMETRIC_DECRYPT_OUTPUT_SIZE(\c key_type, \c key_bits, \p alg) + * where \c key_type and \c key_bits are the type and bit-size + * respectively of \p key. + * \retval #PSA_ERROR_NOT_SUPPORTED \emptydescription + * \retval #PSA_ERROR_INVALID_ARGUMENT \emptydescription + * \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription + * \retval #PSA_ERROR_COMMUNICATION_FAILURE \emptydescription + * \retval #PSA_ERROR_HARDWARE_FAILURE \emptydescription + * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription + * \retval #PSA_ERROR_STORAGE_FAILURE \emptydescription + * \retval #PSA_ERROR_INSUFFICIENT_ENTROPY \emptydescription + * \retval #PSA_ERROR_INVALID_PADDING \emptydescription + * \retval #PSA_ERROR_BAD_STATE + * The library has not been previously initialized by psa_crypto_init(). + * It is implementation-dependent whether a failure to initialize + * results in this error code. + */ +psa_status_t psa_asymmetric_decrypt(mbedtls_svc_key_id_t key, + psa_algorithm_t alg, + const uint8_t *input, + size_t input_length, + const uint8_t *salt, + size_t salt_length, + uint8_t *output, + size_t output_size, + size_t *output_length); + +/**@}*/ + +/** \defgroup key_derivation Key derivation and pseudorandom generation + * @{ + */ + +/** The type of the state data structure for key derivation operations. + * + * Before calling any function on a key derivation operation object, the + * application must initialize it by any of the following means: + * - Set the structure to all-bits-zero, for example: + * \code + * psa_key_derivation_operation_t operation; + * memset(&operation, 0, sizeof(operation)); + * \endcode + * - Initialize the structure to logical zero values, for example: + * \code + * psa_key_derivation_operation_t operation = {0}; + * \endcode + * - Initialize the structure to the initializer #PSA_KEY_DERIVATION_OPERATION_INIT, + * for example: + * \code + * psa_key_derivation_operation_t operation = PSA_KEY_DERIVATION_OPERATION_INIT; + * \endcode + * - Assign the result of the function psa_key_derivation_operation_init() + * to the structure, for example: + * \code + * psa_key_derivation_operation_t operation; + * operation = psa_key_derivation_operation_init(); + * \endcode + * + * This is an implementation-defined \c struct. Applications should not + * make any assumptions about the content of this structure. + * Implementation details can change in future versions without notice. + */ +typedef struct psa_key_derivation_s psa_key_derivation_operation_t; + +/** \def PSA_KEY_DERIVATION_OPERATION_INIT + * + * This macro returns a suitable initializer for a key derivation operation + * object of type #psa_key_derivation_operation_t. + */ + +/** Return an initial value for a key derivation operation object. + */ +static psa_key_derivation_operation_t psa_key_derivation_operation_init(void); + +/** Set up a key derivation operation. + * + * A key derivation algorithm takes some inputs and uses them to generate + * a byte stream in a deterministic way. + * This byte stream can be used to produce keys and other + * cryptographic material. + * + * To derive a key: + * -# Start with an initialized object of type #psa_key_derivation_operation_t. + * -# Call psa_key_derivation_setup() to select the algorithm. + * -# Provide the inputs for the key derivation by calling + * psa_key_derivation_input_bytes() or psa_key_derivation_input_key() + * as appropriate. Which inputs are needed, in what order, and whether + * they may be keys and if so of what type depends on the algorithm. + * -# Optionally set the operation's maximum capacity with + * psa_key_derivation_set_capacity(). You may do this before, in the middle + * of or after providing inputs. For some algorithms, this step is mandatory + * because the output depends on the maximum capacity. + * -# To derive a key, call psa_key_derivation_output_key(). + * To derive a byte string for a different purpose, call + * psa_key_derivation_output_bytes(). + * Successive calls to these functions use successive output bytes + * calculated by the key derivation algorithm. + * -# Clean up the key derivation operation object with + * psa_key_derivation_abort(). + * + * If this function returns an error, the key derivation operation object is + * not changed. + * + * If an error occurs at any step after a call to psa_key_derivation_setup(), + * the operation will need to be reset by a call to psa_key_derivation_abort(). + * + * Implementations must reject an attempt to derive a key of size 0. + * + * \param[in,out] operation The key derivation operation object + * to set up. It must + * have been initialized but not set up yet. + * \param alg The key derivation algorithm to compute + * (\c PSA_ALG_XXX value such that + * #PSA_ALG_IS_KEY_DERIVATION(\p alg) is true). + * + * \retval #PSA_SUCCESS + * Success. + * \retval #PSA_ERROR_INVALID_ARGUMENT + * \c alg is not a key derivation algorithm. + * \retval #PSA_ERROR_NOT_SUPPORTED + * \c alg is not supported or is not a key derivation algorithm. + * \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription + * \retval #PSA_ERROR_COMMUNICATION_FAILURE \emptydescription + * \retval #PSA_ERROR_HARDWARE_FAILURE \emptydescription + * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription + * \retval #PSA_ERROR_STORAGE_FAILURE \emptydescription + * \retval #PSA_ERROR_BAD_STATE + * The operation state is not valid (it must be inactive), or + * the library has not been previously initialized by psa_crypto_init(). + * It is implementation-dependent whether a failure to initialize + * results in this error code. + */ +psa_status_t psa_key_derivation_setup( + psa_key_derivation_operation_t *operation, + psa_algorithm_t alg); + +/** Retrieve the current capacity of a key derivation operation. + * + * The capacity of a key derivation is the maximum number of bytes that it can + * return. When you get *N* bytes of output from a key derivation operation, + * this reduces its capacity by *N*. + * + * \param[in] operation The operation to query. + * \param[out] capacity On success, the capacity of the operation. + * + * \retval #PSA_SUCCESS \emptydescription + * \retval #PSA_ERROR_COMMUNICATION_FAILURE \emptydescription + * \retval #PSA_ERROR_HARDWARE_FAILURE \emptydescription + * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription + * \retval #PSA_ERROR_BAD_STATE + * The operation state is not valid (it must be active), or + * the library has not been previously initialized by psa_crypto_init(). + * It is implementation-dependent whether a failure to initialize + * results in this error code. + */ +psa_status_t psa_key_derivation_get_capacity( + const psa_key_derivation_operation_t *operation, + size_t *capacity); + +/** Set the maximum capacity of a key derivation operation. + * + * The capacity of a key derivation operation is the maximum number of bytes + * that the key derivation operation can return from this point onwards. + * + * \param[in,out] operation The key derivation operation object to modify. + * \param capacity The new capacity of the operation. + * It must be less or equal to the operation's + * current capacity. + * + * \retval #PSA_SUCCESS \emptydescription + * \retval #PSA_ERROR_INVALID_ARGUMENT + * \p capacity is larger than the operation's current capacity. + * In this case, the operation object remains valid and its capacity + * remains unchanged. + * \retval #PSA_ERROR_COMMUNICATION_FAILURE \emptydescription + * \retval #PSA_ERROR_HARDWARE_FAILURE \emptydescription + * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription + * \retval #PSA_ERROR_BAD_STATE + * The operation state is not valid (it must be active), or the + * library has not been previously initialized by psa_crypto_init(). + * It is implementation-dependent whether a failure to initialize + * results in this error code. + */ +psa_status_t psa_key_derivation_set_capacity( + psa_key_derivation_operation_t *operation, + size_t capacity); + +/** Use the maximum possible capacity for a key derivation operation. + * + * Use this value as the capacity argument when setting up a key derivation + * to indicate that the operation should have the maximum possible capacity. + * The value of the maximum possible capacity depends on the key derivation + * algorithm. + */ +#define PSA_KEY_DERIVATION_UNLIMITED_CAPACITY ((size_t) (-1)) + +/** Provide an input for key derivation or key agreement. + * + * Which inputs are required and in what order depends on the algorithm. + * Refer to the documentation of each key derivation or key agreement + * algorithm for information. + * + * This function passes direct inputs, which is usually correct for + * non-secret inputs. To pass a secret input, which should be in a key + * object, call psa_key_derivation_input_key() instead of this function. + * Refer to the documentation of individual step types + * (`PSA_KEY_DERIVATION_INPUT_xxx` values of type ::psa_key_derivation_step_t) + * for more information. + * + * If this function returns an error status, the operation enters an error + * state and must be aborted by calling psa_key_derivation_abort(). + * + * \param[in,out] operation The key derivation operation object to use. + * It must have been set up with + * psa_key_derivation_setup() and must not + * have produced any output yet. + * \param step Which step the input data is for. + * \param[in] data Input data to use. + * \param data_length Size of the \p data buffer in bytes. + * + * \retval #PSA_SUCCESS + * Success. + * \retval #PSA_ERROR_INVALID_ARGUMENT + * \c step is not compatible with the operation's algorithm, or + * \c step does not allow direct inputs. + * \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription + * \retval #PSA_ERROR_COMMUNICATION_FAILURE \emptydescription + * \retval #PSA_ERROR_HARDWARE_FAILURE \emptydescription + * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription + * \retval #PSA_ERROR_STORAGE_FAILURE \emptydescription + * \retval #PSA_ERROR_BAD_STATE + * The operation state is not valid for this input \p step, or + * the library has not been previously initialized by psa_crypto_init(). + * It is implementation-dependent whether a failure to initialize + * results in this error code. + */ +psa_status_t psa_key_derivation_input_bytes( + psa_key_derivation_operation_t *operation, + psa_key_derivation_step_t step, + const uint8_t *data, + size_t data_length); + +/** Provide a numeric input for key derivation or key agreement. + * + * Which inputs are required and in what order depends on the algorithm. + * However, when an algorithm requires a particular order, numeric inputs + * usually come first as they tend to be configuration parameters. + * Refer to the documentation of each key derivation or key agreement + * algorithm for information. + * + * This function is used for inputs which are fixed-size non-negative + * integers. + * + * If this function returns an error status, the operation enters an error + * state and must be aborted by calling psa_key_derivation_abort(). + * + * \param[in,out] operation The key derivation operation object to use. + * It must have been set up with + * psa_key_derivation_setup() and must not + * have produced any output yet. + * \param step Which step the input data is for. + * \param[in] value The value of the numeric input. + * + * \retval #PSA_SUCCESS + * Success. + * \retval #PSA_ERROR_INVALID_ARGUMENT + * \c step is not compatible with the operation's algorithm, or + * \c step does not allow numeric inputs. + * \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription + * \retval #PSA_ERROR_COMMUNICATION_FAILURE \emptydescription + * \retval #PSA_ERROR_HARDWARE_FAILURE \emptydescription + * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription + * \retval #PSA_ERROR_STORAGE_FAILURE \emptydescription + * \retval #PSA_ERROR_BAD_STATE + * The operation state is not valid for this input \p step, or + * the library has not been previously initialized by psa_crypto_init(). + * It is implementation-dependent whether a failure to initialize + * results in this error code. + */ +psa_status_t psa_key_derivation_input_integer( + psa_key_derivation_operation_t *operation, + psa_key_derivation_step_t step, + uint64_t value); + +/** Provide an input for key derivation in the form of a key. + * + * Which inputs are required and in what order depends on the algorithm. + * Refer to the documentation of each key derivation or key agreement + * algorithm for information. + * + * This function obtains input from a key object, which is usually correct for + * secret inputs or for non-secret personalization strings kept in the key + * store. To pass a non-secret parameter which is not in the key store, + * call psa_key_derivation_input_bytes() instead of this function. + * Refer to the documentation of individual step types + * (`PSA_KEY_DERIVATION_INPUT_xxx` values of type ::psa_key_derivation_step_t) + * for more information. + * + * If this function returns an error status, the operation enters an error + * state and must be aborted by calling psa_key_derivation_abort(). + * + * \param[in,out] operation The key derivation operation object to use. + * It must have been set up with + * psa_key_derivation_setup() and must not + * have produced any output yet. + * \param step Which step the input data is for. + * \param key Identifier of the key. It must have an + * appropriate type for step and must allow the + * usage #PSA_KEY_USAGE_DERIVE or + * #PSA_KEY_USAGE_VERIFY_DERIVATION (see note) + * and the algorithm used by the operation. + * + * \note Once all inputs steps are completed, the operations will allow: + * - psa_key_derivation_output_bytes() if each input was either a direct input + * or a key with #PSA_KEY_USAGE_DERIVE set; + * - psa_key_derivation_output_key() if the input for step + * #PSA_KEY_DERIVATION_INPUT_SECRET or #PSA_KEY_DERIVATION_INPUT_PASSWORD + * was from a key slot with #PSA_KEY_USAGE_DERIVE and each other input was + * either a direct input or a key with #PSA_KEY_USAGE_DERIVE set; + * - psa_key_derivation_verify_bytes() if each input was either a direct input + * or a key with #PSA_KEY_USAGE_VERIFY_DERIVATION set; + * - psa_key_derivation_verify_key() under the same conditions as + * psa_key_derivation_verify_bytes(). + * + * \retval #PSA_SUCCESS + * Success. + * \retval #PSA_ERROR_INVALID_HANDLE \emptydescription + * \retval #PSA_ERROR_NOT_PERMITTED + * The key allows neither #PSA_KEY_USAGE_DERIVE nor + * #PSA_KEY_USAGE_VERIFY_DERIVATION, or it doesn't allow this + * algorithm. + * \retval #PSA_ERROR_INVALID_ARGUMENT + * \c step is not compatible with the operation's algorithm, or + * \c step does not allow key inputs of the given type + * or does not allow key inputs at all. + * \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription + * \retval #PSA_ERROR_COMMUNICATION_FAILURE \emptydescription + * \retval #PSA_ERROR_HARDWARE_FAILURE \emptydescription + * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription + * \retval #PSA_ERROR_STORAGE_FAILURE \emptydescription + * \retval #PSA_ERROR_BAD_STATE + * The operation state is not valid for this input \p step, or + * the library has not been previously initialized by psa_crypto_init(). + * It is implementation-dependent whether a failure to initialize + * results in this error code. + */ +psa_status_t psa_key_derivation_input_key( + psa_key_derivation_operation_t *operation, + psa_key_derivation_step_t step, + mbedtls_svc_key_id_t key); + +/** Perform a key agreement and use the shared secret as input to a key + * derivation. + * + * A key agreement algorithm takes two inputs: a private key \p private_key + * a public key \p peer_key. + * The result of this function is passed as input to a key derivation. + * The output of this key derivation can be extracted by reading from the + * resulting operation to produce keys and other cryptographic material. + * + * If this function returns an error status, the operation enters an error + * state and must be aborted by calling psa_key_derivation_abort(). + * + * \param[in,out] operation The key derivation operation object to use. + * It must have been set up with + * psa_key_derivation_setup() with a + * key agreement and derivation algorithm + * \c alg (\c PSA_ALG_XXX value such that + * #PSA_ALG_IS_KEY_AGREEMENT(\c alg) is true + * and #PSA_ALG_IS_RAW_KEY_AGREEMENT(\c alg) + * is false). + * The operation must be ready for an + * input of the type given by \p step. + * \param step Which step the input data is for. + * \param private_key Identifier of the private key to use. It must + * allow the usage #PSA_KEY_USAGE_DERIVE. + * \param[in] peer_key Public key of the peer. The peer key must be in the + * same format that psa_import_key() accepts for the + * public key type corresponding to the type of + * private_key. That is, this function performs the + * equivalent of + * #psa_import_key(..., + * `peer_key`, `peer_key_length`) where + * with key attributes indicating the public key + * type corresponding to the type of `private_key`. + * For example, for EC keys, this means that peer_key + * is interpreted as a point on the curve that the + * private key is on. The standard formats for public + * keys are documented in the documentation of + * psa_export_public_key(). + * \param peer_key_length Size of \p peer_key in bytes. + * + * \retval #PSA_SUCCESS + * Success. + * \retval #PSA_ERROR_INVALID_HANDLE \emptydescription + * \retval #PSA_ERROR_NOT_PERMITTED \emptydescription + * \retval #PSA_ERROR_INVALID_ARGUMENT + * \c private_key is not compatible with \c alg, + * or \p peer_key is not valid for \c alg or not compatible with + * \c private_key, or \c step does not allow an input resulting + * from a key agreement. + * \retval #PSA_ERROR_NOT_SUPPORTED + * \c alg is not supported or is not a key derivation algorithm. + * \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription + * \retval #PSA_ERROR_COMMUNICATION_FAILURE \emptydescription + * \retval #PSA_ERROR_HARDWARE_FAILURE \emptydescription + * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription + * \retval #PSA_ERROR_STORAGE_FAILURE \emptydescription + * \retval #PSA_ERROR_BAD_STATE + * The operation state is not valid for this key agreement \p step, + * or the library has not been previously initialized by psa_crypto_init(). + * It is implementation-dependent whether a failure to initialize + * results in this error code. + */ +psa_status_t psa_key_derivation_key_agreement( + psa_key_derivation_operation_t *operation, + psa_key_derivation_step_t step, + mbedtls_svc_key_id_t private_key, + const uint8_t *peer_key, + size_t peer_key_length); + +/** Read some data from a key derivation operation. + * + * This function calculates output bytes from a key derivation algorithm and + * return those bytes. + * If you view the key derivation's output as a stream of bytes, this + * function destructively reads the requested number of bytes from the + * stream. + * The operation's capacity decreases by the number of bytes read. + * + * If this function returns an error status other than + * #PSA_ERROR_INSUFFICIENT_DATA, the operation enters an error + * state and must be aborted by calling psa_key_derivation_abort(). + * + * \param[in,out] operation The key derivation operation object to read from. + * \param[out] output Buffer where the output will be written. + * \param output_length Number of bytes to output. + * + * \retval #PSA_SUCCESS \emptydescription + * \retval #PSA_ERROR_NOT_PERMITTED + * One of the inputs was a key whose policy didn't allow + * #PSA_KEY_USAGE_DERIVE. + * \retval #PSA_ERROR_INSUFFICIENT_DATA + * The operation's capacity was less than + * \p output_length bytes. Note that in this case, + * no output is written to the output buffer. + * The operation's capacity is set to 0, thus + * subsequent calls to this function will not + * succeed, even with a smaller output buffer. + * \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription + * \retval #PSA_ERROR_COMMUNICATION_FAILURE \emptydescription + * \retval #PSA_ERROR_HARDWARE_FAILURE \emptydescription + * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription + * \retval #PSA_ERROR_STORAGE_FAILURE \emptydescription + * \retval #PSA_ERROR_BAD_STATE + * The operation state is not valid (it must be active and completed + * all required input steps), or the library has not been previously + * initialized by psa_crypto_init(). + * It is implementation-dependent whether a failure to initialize + * results in this error code. + */ +psa_status_t psa_key_derivation_output_bytes( + psa_key_derivation_operation_t *operation, + uint8_t *output, + size_t output_length); + +/** Derive a key from an ongoing key derivation operation. + * + * This function calculates output bytes from a key derivation algorithm + * and uses those bytes to generate a key deterministically. + * The key's location, usage policy, type and size are taken from + * \p attributes. + * + * If you view the key derivation's output as a stream of bytes, this + * function destructively reads as many bytes as required from the + * stream. + * The operation's capacity decreases by the number of bytes read. + * + * If this function returns an error status other than + * #PSA_ERROR_INSUFFICIENT_DATA, the operation enters an error + * state and must be aborted by calling psa_key_derivation_abort(). + * + * How much output is produced and consumed from the operation, and how + * the key is derived, depends on the key type and on the key size + * (denoted \c bits below): + * + * - For key types for which the key is an arbitrary sequence of bytes + * of a given size, this function is functionally equivalent to + * calling #psa_key_derivation_output_bytes + * and passing the resulting output to #psa_import_key. + * However, this function has a security benefit: + * if the implementation provides an isolation boundary then + * the key material is not exposed outside the isolation boundary. + * As a consequence, for these key types, this function always consumes + * exactly (\c bits / 8) bytes from the operation. + * The following key types defined in this specification follow this scheme: + * + * - #PSA_KEY_TYPE_AES; + * - #PSA_KEY_TYPE_ARIA; + * - #PSA_KEY_TYPE_CAMELLIA; + * - #PSA_KEY_TYPE_DERIVE; + * - #PSA_KEY_TYPE_HMAC; + * - #PSA_KEY_TYPE_PASSWORD_HASH. + * + * - For ECC keys on a Montgomery elliptic curve + * (#PSA_KEY_TYPE_ECC_KEY_PAIR(\c curve) where \c curve designates a + * Montgomery curve), this function always draws a byte string whose + * length is determined by the curve, and sets the mandatory bits + * accordingly. That is: + * + * - Curve25519 (#PSA_ECC_FAMILY_MONTGOMERY, 255 bits): draw a 32-byte + * string and process it as specified in RFC 7748 §5. + * - Curve448 (#PSA_ECC_FAMILY_MONTGOMERY, 448 bits): draw a 56-byte + * string and process it as specified in RFC 7748 §5. + * + * - For key types for which the key is represented by a single sequence of + * \c bits bits with constraints as to which bit sequences are acceptable, + * this function draws a byte string of length (\c bits / 8) bytes rounded + * up to the nearest whole number of bytes. If the resulting byte string + * is acceptable, it becomes the key, otherwise the drawn bytes are discarded. + * This process is repeated until an acceptable byte string is drawn. + * The byte string drawn from the operation is interpreted as specified + * for the output produced by psa_export_key(). + * The following key types defined in this specification follow this scheme: + * + * - #PSA_KEY_TYPE_DES. + * Force-set the parity bits, but discard forbidden weak keys. + * For 2-key and 3-key triple-DES, the three keys are generated + * successively (for example, for 3-key triple-DES, + * if the first 8 bytes specify a weak key and the next 8 bytes do not, + * discard the first 8 bytes, use the next 8 bytes as the first key, + * and continue reading output from the operation to derive the other + * two keys). + * - Finite-field Diffie-Hellman keys (#PSA_KEY_TYPE_DH_KEY_PAIR(\c group) + * where \c group designates any Diffie-Hellman group) and + * ECC keys on a Weierstrass elliptic curve + * (#PSA_KEY_TYPE_ECC_KEY_PAIR(\c curve) where \c curve designates a + * Weierstrass curve). + * For these key types, interpret the byte string as integer + * in big-endian order. Discard it if it is not in the range + * [0, *N* - 2] where *N* is the boundary of the private key domain + * (the prime *p* for Diffie-Hellman, the subprime *q* for DSA, + * or the order of the curve's base point for ECC). + * Add 1 to the resulting integer and use this as the private key *x*. + * This method allows compliance to NIST standards, specifically + * the methods titled "key-pair generation by testing candidates" + * in NIST SP 800-56A §5.6.1.1.4 for Diffie-Hellman, + * in FIPS 186-4 §B.1.2 for DSA, and + * in NIST SP 800-56A §5.6.1.2.2 or + * FIPS 186-4 §B.4.2 for elliptic curve keys. + * + * - For other key types, including #PSA_KEY_TYPE_RSA_KEY_PAIR, + * the way in which the operation output is consumed is + * implementation-defined. + * + * In all cases, the data that is read is discarded from the operation. + * The operation's capacity is decreased by the number of bytes read. + * + * For algorithms that take an input step #PSA_KEY_DERIVATION_INPUT_SECRET, + * the input to that step must be provided with psa_key_derivation_input_key(). + * Future versions of this specification may include additional restrictions + * on the derived key based on the attributes and strength of the secret key. + * + * \param[in] attributes The attributes for the new key. + * If the key type to be created is + * #PSA_KEY_TYPE_PASSWORD_HASH then the algorithm in + * the policy must be the same as in the current + * operation. + * \param[in,out] operation The key derivation operation object to read from. + * \param[out] key On success, an identifier for the newly created + * key. For persistent keys, this is the key + * identifier defined in \p attributes. + * \c 0 on failure. + * + * \retval #PSA_SUCCESS + * Success. + * If the key is persistent, the key material and the key's metadata + * have been saved to persistent storage. + * \retval #PSA_ERROR_ALREADY_EXISTS + * This is an attempt to create a persistent key, and there is + * already a persistent key with the given identifier. + * \retval #PSA_ERROR_INSUFFICIENT_DATA + * There was not enough data to create the desired key. + * Note that in this case, no output is written to the output buffer. + * The operation's capacity is set to 0, thus subsequent calls to + * this function will not succeed, even with a smaller output buffer. + * \retval #PSA_ERROR_NOT_SUPPORTED + * The key type or key size is not supported, either by the + * implementation in general or in this particular location. + * \retval #PSA_ERROR_INVALID_ARGUMENT + * The provided key attributes are not valid for the operation. + * \retval #PSA_ERROR_NOT_PERMITTED + * The #PSA_KEY_DERIVATION_INPUT_SECRET or + * #PSA_KEY_DERIVATION_INPUT_PASSWORD input was not provided through a + * key; or one of the inputs was a key whose policy didn't allow + * #PSA_KEY_USAGE_DERIVE. + * \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription + * \retval #PSA_ERROR_INSUFFICIENT_STORAGE \emptydescription + * \retval #PSA_ERROR_COMMUNICATION_FAILURE \emptydescription + * \retval #PSA_ERROR_HARDWARE_FAILURE \emptydescription + * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription + * \retval #PSA_ERROR_DATA_INVALID \emptydescription + * \retval #PSA_ERROR_DATA_CORRUPT \emptydescription + * \retval #PSA_ERROR_STORAGE_FAILURE \emptydescription + * \retval #PSA_ERROR_BAD_STATE + * The operation state is not valid (it must be active and completed + * all required input steps), or the library has not been previously + * initialized by psa_crypto_init(). + * It is implementation-dependent whether a failure to initialize + * results in this error code. + */ +psa_status_t psa_key_derivation_output_key( + const psa_key_attributes_t *attributes, + psa_key_derivation_operation_t *operation, + mbedtls_svc_key_id_t *key); + +/** Compare output data from a key derivation operation to an expected value. + * + * This function calculates output bytes from a key derivation algorithm and + * compares those bytes to an expected value in constant time. + * If you view the key derivation's output as a stream of bytes, this + * function destructively reads the expected number of bytes from the + * stream before comparing them. + * The operation's capacity decreases by the number of bytes read. + * + * This is functionally equivalent to the following code: + * \code + * psa_key_derivation_output_bytes(operation, tmp, output_length); + * if (memcmp(output, tmp, output_length) != 0) + * return PSA_ERROR_INVALID_SIGNATURE; + * \endcode + * except (1) it works even if the key's policy does not allow outputting the + * bytes, and (2) the comparison will be done in constant time. + * + * If this function returns an error status other than + * #PSA_ERROR_INSUFFICIENT_DATA or #PSA_ERROR_INVALID_SIGNATURE, + * the operation enters an error state and must be aborted by calling + * psa_key_derivation_abort(). + * + * \param[in,out] operation The key derivation operation object to read from. + * \param[in] expected_output Buffer containing the expected derivation output. + * \param output_length Length of the expected output; this is also the + * number of bytes that will be read. + * + * \retval #PSA_SUCCESS \emptydescription + * \retval #PSA_ERROR_INVALID_SIGNATURE + * The output was read successfully, but it differs from the expected + * output. + * \retval #PSA_ERROR_NOT_PERMITTED + * One of the inputs was a key whose policy didn't allow + * #PSA_KEY_USAGE_VERIFY_DERIVATION. + * \retval #PSA_ERROR_INSUFFICIENT_DATA + * The operation's capacity was less than + * \p output_length bytes. Note that in this case, + * the operation's capacity is set to 0, thus + * subsequent calls to this function will not + * succeed, even with a smaller expected output. + * \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription + * \retval #PSA_ERROR_COMMUNICATION_FAILURE \emptydescription + * \retval #PSA_ERROR_HARDWARE_FAILURE \emptydescription + * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription + * \retval #PSA_ERROR_STORAGE_FAILURE \emptydescription + * \retval #PSA_ERROR_BAD_STATE + * The operation state is not valid (it must be active and completed + * all required input steps), or the library has not been previously + * initialized by psa_crypto_init(). + * It is implementation-dependent whether a failure to initialize + * results in this error code. + */ +psa_status_t psa_key_derivation_verify_bytes( + psa_key_derivation_operation_t *operation, + const uint8_t *expected_output, + size_t output_length); + +/** Compare output data from a key derivation operation to an expected value + * stored in a key object. + * + * This function calculates output bytes from a key derivation algorithm and + * compares those bytes to an expected value, provided as key of type + * #PSA_KEY_TYPE_PASSWORD_HASH. + * If you view the key derivation's output as a stream of bytes, this + * function destructively reads the number of bytes corresponding to the + * length of the expected value from the stream before comparing them. + * The operation's capacity decreases by the number of bytes read. + * + * This is functionally equivalent to exporting the key and calling + * psa_key_derivation_verify_bytes() on the result, except that it + * works even if the key cannot be exported. + * + * If this function returns an error status other than + * #PSA_ERROR_INSUFFICIENT_DATA or #PSA_ERROR_INVALID_SIGNATURE, + * the operation enters an error state and must be aborted by calling + * psa_key_derivation_abort(). + * + * \param[in,out] operation The key derivation operation object to read from. + * \param[in] expected A key of type #PSA_KEY_TYPE_PASSWORD_HASH + * containing the expected output. Its policy must + * include the #PSA_KEY_USAGE_VERIFY_DERIVATION flag + * and the permitted algorithm must match the + * operation. The value of this key was likely + * computed by a previous call to + * psa_key_derivation_output_key(). + * + * \retval #PSA_SUCCESS \emptydescription + * \retval #PSA_ERROR_INVALID_SIGNATURE + * The output was read successfully, but if differs from the expected + * output. + * \retval #PSA_ERROR_INVALID_HANDLE + * The key passed as the expected value does not exist. + * \retval #PSA_ERROR_INVALID_ARGUMENT + * The key passed as the expected value has an invalid type. + * \retval #PSA_ERROR_NOT_PERMITTED + * The key passed as the expected value does not allow this usage or + * this algorithm; or one of the inputs was a key whose policy didn't + * allow #PSA_KEY_USAGE_VERIFY_DERIVATION. + * \retval #PSA_ERROR_INSUFFICIENT_DATA + * The operation's capacity was less than + * the length of the expected value. In this case, + * the operation's capacity is set to 0, thus + * subsequent calls to this function will not + * succeed, even with a smaller expected output. + * \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription + * \retval #PSA_ERROR_COMMUNICATION_FAILURE \emptydescription + * \retval #PSA_ERROR_HARDWARE_FAILURE \emptydescription + * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription + * \retval #PSA_ERROR_STORAGE_FAILURE \emptydescription + * \retval #PSA_ERROR_BAD_STATE + * The operation state is not valid (it must be active and completed + * all required input steps), or the library has not been previously + * initialized by psa_crypto_init(). + * It is implementation-dependent whether a failure to initialize + * results in this error code. + */ +psa_status_t psa_key_derivation_verify_key( + psa_key_derivation_operation_t *operation, + mbedtls_svc_key_id_t expected); + +/** Abort a key derivation operation. + * + * Aborting an operation frees all associated resources except for the \c + * operation structure itself. Once aborted, the operation object can be reused + * for another operation by calling psa_key_derivation_setup() again. + * + * This function may be called at any time after the operation + * object has been initialized as described in #psa_key_derivation_operation_t. + * + * In particular, it is valid to call psa_key_derivation_abort() twice, or to + * call psa_key_derivation_abort() on an operation that has not been set up. + * + * \param[in,out] operation The operation to abort. + * + * \retval #PSA_SUCCESS \emptydescription + * \retval #PSA_ERROR_COMMUNICATION_FAILURE \emptydescription + * \retval #PSA_ERROR_HARDWARE_FAILURE \emptydescription + * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription + * \retval #PSA_ERROR_BAD_STATE + * The library has not been previously initialized by psa_crypto_init(). + * It is implementation-dependent whether a failure to initialize + * results in this error code. + */ +psa_status_t psa_key_derivation_abort( + psa_key_derivation_operation_t *operation); + +/** Perform a key agreement and return the raw shared secret. + * + * \warning The raw result of a key agreement algorithm such as finite-field + * Diffie-Hellman or elliptic curve Diffie-Hellman has biases and should + * not be used directly as key material. It should instead be passed as + * input to a key derivation algorithm. To chain a key agreement with + * a key derivation, use psa_key_derivation_key_agreement() and other + * functions from the key derivation interface. + * + * \param alg The key agreement algorithm to compute + * (\c PSA_ALG_XXX value such that + * #PSA_ALG_IS_RAW_KEY_AGREEMENT(\p alg) + * is true). + * \param private_key Identifier of the private key to use. It must + * allow the usage #PSA_KEY_USAGE_DERIVE. + * \param[in] peer_key Public key of the peer. It must be + * in the same format that psa_import_key() + * accepts. The standard formats for public + * keys are documented in the documentation + * of psa_export_public_key(). + * \param peer_key_length Size of \p peer_key in bytes. + * \param[out] output Buffer where the decrypted message is to + * be written. + * \param output_size Size of the \c output buffer in bytes. + * \param[out] output_length On success, the number of bytes + * that make up the returned output. + * + * \retval #PSA_SUCCESS + * Success. + * \retval #PSA_ERROR_INVALID_HANDLE \emptydescription + * \retval #PSA_ERROR_NOT_PERMITTED \emptydescription + * \retval #PSA_ERROR_INVALID_ARGUMENT + * \p alg is not a key agreement algorithm, or + * \p private_key is not compatible with \p alg, + * or \p peer_key is not valid for \p alg or not compatible with + * \p private_key. + * \retval #PSA_ERROR_BUFFER_TOO_SMALL + * \p output_size is too small + * \retval #PSA_ERROR_NOT_SUPPORTED + * \p alg is not a supported key agreement algorithm. + * \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription + * \retval #PSA_ERROR_COMMUNICATION_FAILURE \emptydescription + * \retval #PSA_ERROR_HARDWARE_FAILURE \emptydescription + * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription + * \retval #PSA_ERROR_STORAGE_FAILURE \emptydescription + * \retval #PSA_ERROR_BAD_STATE + * The library has not been previously initialized by psa_crypto_init(). + * It is implementation-dependent whether a failure to initialize + * results in this error code. + */ +psa_status_t psa_raw_key_agreement(psa_algorithm_t alg, + mbedtls_svc_key_id_t private_key, + const uint8_t *peer_key, + size_t peer_key_length, + uint8_t *output, + size_t output_size, + size_t *output_length); + +/**@}*/ + +/** \defgroup random Random generation + * @{ + */ + +/** + * \brief Generate random bytes. + * + * \warning This function **can** fail! Callers MUST check the return status + * and MUST NOT use the content of the output buffer if the return + * status is not #PSA_SUCCESS. + * + * \note To generate a key, use psa_generate_key() instead. + * + * \param[out] output Output buffer for the generated data. + * \param output_size Number of bytes to generate and output. + * + * \retval #PSA_SUCCESS \emptydescription + * \retval #PSA_ERROR_NOT_SUPPORTED \emptydescription + * \retval #PSA_ERROR_INSUFFICIENT_ENTROPY \emptydescription + * \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription + * \retval #PSA_ERROR_COMMUNICATION_FAILURE \emptydescription + * \retval #PSA_ERROR_HARDWARE_FAILURE \emptydescription + * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription + * \retval #PSA_ERROR_BAD_STATE + * The library has not been previously initialized by psa_crypto_init(). + * It is implementation-dependent whether a failure to initialize + * results in this error code. + */ +psa_status_t psa_generate_random(uint8_t *output, + size_t output_size); + +/** + * \brief Generate a key or key pair. + * + * The key is generated randomly. + * Its location, usage policy, type and size are taken from \p attributes. + * + * Implementations must reject an attempt to generate a key of size 0. + * + * The following type-specific considerations apply: + * - For RSA keys (#PSA_KEY_TYPE_RSA_KEY_PAIR), + * the public exponent is 65537. + * The modulus is a product of two probabilistic primes + * between 2^{n-1} and 2^n where n is the bit size specified in the + * attributes. + * + * \param[in] attributes The attributes for the new key. + * \param[out] key On success, an identifier for the newly created + * key. For persistent keys, this is the key + * identifier defined in \p attributes. + * \c 0 on failure. + * + * \retval #PSA_SUCCESS + * Success. + * If the key is persistent, the key material and the key's metadata + * have been saved to persistent storage. + * \retval #PSA_ERROR_ALREADY_EXISTS + * This is an attempt to create a persistent key, and there is + * already a persistent key with the given identifier. + * \retval #PSA_ERROR_NOT_SUPPORTED \emptydescription + * \retval #PSA_ERROR_INVALID_ARGUMENT \emptydescription + * \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription + * \retval #PSA_ERROR_INSUFFICIENT_ENTROPY \emptydescription + * \retval #PSA_ERROR_COMMUNICATION_FAILURE \emptydescription + * \retval #PSA_ERROR_HARDWARE_FAILURE \emptydescription + * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription + * \retval #PSA_ERROR_INSUFFICIENT_STORAGE \emptydescription + * \retval #PSA_ERROR_DATA_INVALID \emptydescription + * \retval #PSA_ERROR_DATA_CORRUPT \emptydescription + * \retval #PSA_ERROR_STORAGE_FAILURE \emptydescription + * \retval #PSA_ERROR_BAD_STATE + * The library has not been previously initialized by psa_crypto_init(). + * It is implementation-dependent whether a failure to initialize + * results in this error code. + */ +psa_status_t psa_generate_key(const psa_key_attributes_t *attributes, + mbedtls_svc_key_id_t *key); + +/**@}*/ + +/** \defgroup interruptible_hash Interruptible sign/verify hash + * @{ + */ + +/** The type of the state data structure for interruptible hash + * signing operations. + * + * Before calling any function on a sign hash operation object, the + * application must initialize it by any of the following means: + * - Set the structure to all-bits-zero, for example: + * \code + * psa_sign_hash_interruptible_operation_t operation; + * memset(&operation, 0, sizeof(operation)); + * \endcode + * - Initialize the structure to logical zero values, for example: + * \code + * psa_sign_hash_interruptible_operation_t operation = {0}; + * \endcode + * - Initialize the structure to the initializer + * #PSA_SIGN_HASH_INTERRUPTIBLE_OPERATION_INIT, for example: + * \code + * psa_sign_hash_interruptible_operation_t operation = + * PSA_SIGN_HASH_INTERRUPTIBLE_OPERATION_INIT; + * \endcode + * - Assign the result of the function + * psa_sign_hash_interruptible_operation_init() to the structure, for + * example: + * \code + * psa_sign_hash_interruptible_operation_t operation; + * operation = psa_sign_hash_interruptible_operation_init(); + * \endcode + * + * This is an implementation-defined \c struct. Applications should not + * make any assumptions about the content of this structure. + * Implementation details can change in future versions without notice. */ +typedef struct psa_sign_hash_interruptible_operation_s psa_sign_hash_interruptible_operation_t; + +/** The type of the state data structure for interruptible hash + * verification operations. + * + * Before calling any function on a sign hash operation object, the + * application must initialize it by any of the following means: + * - Set the structure to all-bits-zero, for example: + * \code + * psa_verify_hash_interruptible_operation_t operation; + * memset(&operation, 0, sizeof(operation)); + * \endcode + * - Initialize the structure to logical zero values, for example: + * \code + * psa_verify_hash_interruptible_operation_t operation = {0}; + * \endcode + * - Initialize the structure to the initializer + * #PSA_VERIFY_HASH_INTERRUPTIBLE_OPERATION_INIT, for example: + * \code + * psa_verify_hash_interruptible_operation_t operation = + * PSA_VERIFY_HASH_INTERRUPTIBLE_OPERATION_INIT; + * \endcode + * - Assign the result of the function + * psa_verify_hash_interruptible_operation_init() to the structure, for + * example: + * \code + * psa_verify_hash_interruptible_operation_t operation; + * operation = psa_verify_hash_interruptible_operation_init(); + * \endcode + * + * This is an implementation-defined \c struct. Applications should not + * make any assumptions about the content of this structure. + * Implementation details can change in future versions without notice. */ +typedef struct psa_verify_hash_interruptible_operation_s psa_verify_hash_interruptible_operation_t; + +/** + * \brief Set the maximum number of ops allowed to be + * executed by an interruptible function in a + * single call. + * + * \warning This is a beta API, and thus subject to change + * at any point. It is not bound by the usual + * interface stability promises. + * + * \note The time taken to execute a single op is + * implementation specific and depends on + * software, hardware, the algorithm, key type and + * curve chosen. Even within a single operation, + * successive ops can take differing amounts of + * time. The only guarantee is that lower values + * for \p max_ops means functions will block for a + * lesser maximum amount of time. The functions + * \c psa_sign_interruptible_get_num_ops() and + * \c psa_verify_interruptible_get_num_ops() are + * provided to help with tuning this value. + * + * \note This value defaults to + * #PSA_INTERRUPTIBLE_MAX_OPS_UNLIMITED, which + * means the whole operation will be done in one + * go, regardless of the number of ops required. + * + * \note If more ops are needed to complete a + * computation, #PSA_OPERATION_INCOMPLETE will be + * returned by the function performing the + * computation. It is then the caller's + * responsibility to either call again with the + * same operation context until it returns 0 or an + * error code; or to call the relevant abort + * function if the answer is no longer required. + * + * \note The interpretation of \p max_ops is also + * implementation defined. On a hard real time + * system, this can indicate a hard deadline, as a + * real-time system needs a guarantee of not + * spending more than X time, however care must be + * taken in such an implementation to avoid the + * situation whereby calls just return, not being + * able to do any actual work within the allotted + * time. On a non-real-time system, the + * implementation can be more relaxed, but again + * whether this number should be interpreted as as + * hard or soft limit or even whether a less than + * or equals as regards to ops executed in a + * single call is implementation defined. + * + * \note For keys in local storage when no accelerator + * driver applies, please see also the + * documentation for \c mbedtls_ecp_set_max_ops(), + * which is the internal implementation in these + * cases. + * + * \warning With implementations that interpret this number + * as a hard limit, setting this number too small + * may result in an infinite loop, whereby each + * call results in immediate return with no ops + * done (as there is not enough time to execute + * any), and thus no result will ever be achieved. + * + * \note This only applies to functions whose + * documentation mentions they may return + * #PSA_OPERATION_INCOMPLETE. + * + * \param max_ops The maximum number of ops to be executed in a + * single call. This can be a number from 0 to + * #PSA_INTERRUPTIBLE_MAX_OPS_UNLIMITED, where 0 + * is the least amount of work done per call. + */ +void psa_interruptible_set_max_ops(uint32_t max_ops); + +/** + * \brief Get the maximum number of ops allowed to be + * executed by an interruptible function in a + * single call. This will return the last + * value set by + * \c psa_interruptible_set_max_ops() or + * #PSA_INTERRUPTIBLE_MAX_OPS_UNLIMITED if + * that function has never been called. + * + * \warning This is a beta API, and thus subject to change + * at any point. It is not bound by the usual + * interface stability promises. + * + * \return Maximum number of ops allowed to be + * executed by an interruptible function in a + * single call. + */ +uint32_t psa_interruptible_get_max_ops(void); + +/** + * \brief Get the number of ops that a hash signing + * operation has taken so far. If the operation + * has completed, then this will represent the + * number of ops required for the entire + * operation. After initialization or calling + * \c psa_sign_hash_interruptible_abort() on + * the operation, a value of 0 will be returned. + * + * \note This interface is guaranteed re-entrant and + * thus may be called from driver code. + * + * \warning This is a beta API, and thus subject to change + * at any point. It is not bound by the usual + * interface stability promises. + * + * This is a helper provided to help you tune the + * value passed to \c + * psa_interruptible_set_max_ops(). + * + * \param operation The \c psa_sign_hash_interruptible_operation_t + * to use. This must be initialized first. + * + * \return Number of ops that the operation has taken so + * far. + */ +uint32_t psa_sign_hash_get_num_ops( + const psa_sign_hash_interruptible_operation_t *operation); + +/** + * \brief Get the number of ops that a hash verification + * operation has taken so far. If the operation + * has completed, then this will represent the + * number of ops required for the entire + * operation. After initialization or calling \c + * psa_verify_hash_interruptible_abort() on the + * operation, a value of 0 will be returned. + * + * \warning This is a beta API, and thus subject to change + * at any point. It is not bound by the usual + * interface stability promises. + * + * This is a helper provided to help you tune the + * value passed to \c + * psa_interruptible_set_max_ops(). + * + * \param operation The \c + * psa_verify_hash_interruptible_operation_t to + * use. This must be initialized first. + * + * \return Number of ops that the operation has taken so + * far. + */ +uint32_t psa_verify_hash_get_num_ops( + const psa_verify_hash_interruptible_operation_t *operation); + +/** + * \brief Start signing a hash or short message with a + * private key, in an interruptible manner. + * + * \see \c psa_sign_hash_complete() + * + * \warning This is a beta API, and thus subject to change + * at any point. It is not bound by the usual + * interface stability promises. + * + * \note This function combined with \c + * psa_sign_hash_complete() is equivalent to + * \c psa_sign_hash() but + * \c psa_sign_hash_complete() can return early and + * resume according to the limit set with \c + * psa_interruptible_set_max_ops() to reduce the + * maximum time spent in a function call. + * + * \note Users should call \c psa_sign_hash_complete() + * repeatedly on the same context after a + * successful call to this function until \c + * psa_sign_hash_complete() either returns 0 or an + * error. \c psa_sign_hash_complete() will return + * #PSA_OPERATION_INCOMPLETE if there is more work + * to do. Alternatively users can call + * \c psa_sign_hash_abort() at any point if they no + * longer want the result. + * + * \note If this function returns an error status, the + * operation enters an error state and must be + * aborted by calling \c psa_sign_hash_abort(). + * + * \param[in, out] operation The \c psa_sign_hash_interruptible_operation_t + * to use. This must be initialized first. + * + * \param key Identifier of the key to use for the operation. + * It must be an asymmetric key pair. The key must + * allow the usage #PSA_KEY_USAGE_SIGN_HASH. + * \param alg A signature algorithm (\c PSA_ALG_XXX + * value such that #PSA_ALG_IS_SIGN_HASH(\p alg) + * is true), that is compatible with + * the type of \p key. + * \param[in] hash The hash or message to sign. + * \param hash_length Size of the \p hash buffer in bytes. + * + * \retval #PSA_SUCCESS + * The operation started successfully - call \c psa_sign_hash_complete() + * with the same context to complete the operation + * + * \retval #PSA_ERROR_INVALID_HANDLE \emptydescription + * \retval #PSA_ERROR_NOT_PERMITTED + * The key does not have the #PSA_KEY_USAGE_SIGN_HASH flag, or it does + * not permit the requested algorithm. + * \retval #PSA_ERROR_BAD_STATE + * An operation has previously been started on this context, and is + * still in progress. + * \retval #PSA_ERROR_NOT_SUPPORTED \emptydescription + * \retval #PSA_ERROR_INVALID_ARGUMENT \emptydescription + * \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription + * \retval #PSA_ERROR_COMMUNICATION_FAILURE \emptydescription + * \retval #PSA_ERROR_HARDWARE_FAILURE \emptydescription + * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription + * \retval #PSA_ERROR_STORAGE_FAILURE \emptydescription + * \retval #PSA_ERROR_DATA_CORRUPT \emptydescription + * \retval #PSA_ERROR_DATA_INVALID \emptydescription + * \retval #PSA_ERROR_INSUFFICIENT_ENTROPY \emptydescription + * \retval #PSA_ERROR_BAD_STATE + * The library has not been previously initialized by psa_crypto_init(). + * It is implementation-dependent whether a failure to initialize + * results in this error code. + */ +psa_status_t psa_sign_hash_start( + psa_sign_hash_interruptible_operation_t *operation, + mbedtls_svc_key_id_t key, psa_algorithm_t alg, + const uint8_t *hash, size_t hash_length); + +/** + * \brief Continue and eventually complete the action of + * signing a hash or short message with a private + * key, in an interruptible manner. + * + * \see \c psa_sign_hash_start() + * + * \warning This is a beta API, and thus subject to change + * at any point. It is not bound by the usual + * interface stability promises. + * + * \note This function combined with \c + * psa_sign_hash_start() is equivalent to + * \c psa_sign_hash() but this function can return + * early and resume according to the limit set with + * \c psa_interruptible_set_max_ops() to reduce the + * maximum time spent in a function call. + * + * \note Users should call this function on the same + * operation object repeatedly until it either + * returns 0 or an error. This function will return + * #PSA_OPERATION_INCOMPLETE if there is more work + * to do. Alternatively users can call + * \c psa_sign_hash_abort() at any point if they no + * longer want the result. + * + * \note When this function returns successfully, the + * operation becomes inactive. If this function + * returns an error status, the operation enters an + * error state and must be aborted by calling + * \c psa_sign_hash_abort(). + * + * \param[in, out] operation The \c psa_sign_hash_interruptible_operation_t + * to use. This must be initialized first, and have + * had \c psa_sign_hash_start() called with it + * first. + * + * \param[out] signature Buffer where the signature is to be written. + * \param signature_size Size of the \p signature buffer in bytes. This + * must be appropriate for the selected + * algorithm and key: + * - The required signature size is + * #PSA_SIGN_OUTPUT_SIZE(\c key_type, \c + * key_bits, \c alg) where \c key_type and \c + * key_bits are the type and bit-size + * respectively of key. + * - #PSA_SIGNATURE_MAX_SIZE evaluates to the + * maximum signature size of any supported + * signature algorithm. + * \param[out] signature_length On success, the number of bytes that make up + * the returned signature value. + * + * \retval #PSA_SUCCESS + * Operation completed successfully + * + * \retval #PSA_OPERATION_INCOMPLETE + * Operation was interrupted due to the setting of \c + * psa_interruptible_set_max_ops(). There is still work to be done. + * Call this function again with the same operation object. + * + * \retval #PSA_ERROR_BUFFER_TOO_SMALL + * The size of the \p signature buffer is too small. You can + * determine a sufficient buffer size by calling + * #PSA_SIGN_OUTPUT_SIZE(\c key_type, \c key_bits, \p alg) + * where \c key_type and \c key_bits are the type and bit-size + * respectively of \p key. + * + * \retval #PSA_ERROR_BAD_STATE + * An operation was not previously started on this context via + * \c psa_sign_hash_start(). + * + * \retval #PSA_ERROR_NOT_SUPPORTED \emptydescription + * \retval #PSA_ERROR_INVALID_ARGUMENT \emptydescription + * \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription + * \retval #PSA_ERROR_COMMUNICATION_FAILURE \emptydescription + * \retval #PSA_ERROR_HARDWARE_FAILURE \emptydescription + * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription + * \retval #PSA_ERROR_STORAGE_FAILURE \emptydescription + * \retval #PSA_ERROR_DATA_CORRUPT \emptydescription + * \retval #PSA_ERROR_DATA_INVALID \emptydescription + * \retval #PSA_ERROR_INSUFFICIENT_ENTROPY \emptydescription + * \retval #PSA_ERROR_BAD_STATE + * The library has either not been previously initialized by + * psa_crypto_init() or you did not previously call + * psa_sign_hash_start() with this operation object. It is + * implementation-dependent whether a failure to initialize results in + * this error code. + */ +psa_status_t psa_sign_hash_complete( + psa_sign_hash_interruptible_operation_t *operation, + uint8_t *signature, size_t signature_size, + size_t *signature_length); + +/** + * \brief Abort a sign hash operation. + * + * \warning This is a beta API, and thus subject to change + * at any point. It is not bound by the usual + * interface stability promises. + * + * \note This function is the only function that clears + * the number of ops completed as part of the + * operation. Please ensure you copy this value via + * \c psa_sign_hash_get_num_ops() if required + * before calling. + * + * \note Aborting an operation frees all associated + * resources except for the \p operation structure + * itself. Once aborted, the operation object can + * be reused for another operation by calling \c + * psa_sign_hash_start() again. + * + * \note You may call this function any time after the + * operation object has been initialized. In + * particular, calling \c psa_sign_hash_abort() + * after the operation has already been terminated + * by a call to \c psa_sign_hash_abort() or + * psa_sign_hash_complete() is safe. + * + * \param[in,out] operation Initialized sign hash operation. + * + * \retval #PSA_SUCCESS + * The operation was aborted successfully. + * + * \retval #PSA_ERROR_NOT_SUPPORTED \emptydescription + * \retval #PSA_ERROR_BAD_STATE + * The library has not been previously initialized by psa_crypto_init(). + * It is implementation-dependent whether a failure to initialize + * results in this error code. + */ +psa_status_t psa_sign_hash_abort( + psa_sign_hash_interruptible_operation_t *operation); + +/** + * \brief Start reading and verifying a hash or short + * message, in an interruptible manner. + * + * \see \c psa_verify_hash_complete() + * + * \warning This is a beta API, and thus subject to change + * at any point. It is not bound by the usual + * interface stability promises. + * + * \note This function combined with \c + * psa_verify_hash_complete() is equivalent to + * \c psa_verify_hash() but \c + * psa_verify_hash_complete() can return early and + * resume according to the limit set with \c + * psa_interruptible_set_max_ops() to reduce the + * maximum time spent in a function. + * + * \note Users should call \c psa_verify_hash_complete() + * repeatedly on the same operation object after a + * successful call to this function until \c + * psa_verify_hash_complete() either returns 0 or + * an error. \c psa_verify_hash_complete() will + * return #PSA_OPERATION_INCOMPLETE if there is + * more work to do. Alternatively users can call + * \c psa_verify_hash_abort() at any point if they + * no longer want the result. + * + * \note If this function returns an error status, the + * operation enters an error state and must be + * aborted by calling \c psa_verify_hash_abort(). + * + * \param[in, out] operation The \c psa_verify_hash_interruptible_operation_t + * to use. This must be initialized first. + * + * \param key Identifier of the key to use for the operation. + * The key must allow the usage + * #PSA_KEY_USAGE_VERIFY_HASH. + * \param alg A signature algorithm (\c PSA_ALG_XXX + * value such that #PSA_ALG_IS_SIGN_HASH(\p alg) + * is true), that is compatible with + * the type of \p key. + * \param[in] hash The hash whose signature is to be verified. + * \param hash_length Size of the \p hash buffer in bytes. + * \param[in] signature Buffer containing the signature to verify. + * \param signature_length Size of the \p signature buffer in bytes. + * + * \retval #PSA_SUCCESS + * The operation started successfully - please call \c + * psa_verify_hash_complete() with the same context to complete the + * operation. + * + * \retval #PSA_ERROR_BAD_STATE + * Another operation has already been started on this context, and is + * still in progress. + * + * \retval #PSA_ERROR_NOT_PERMITTED + * The key does not have the #PSA_KEY_USAGE_VERIFY_HASH flag, or it does + * not permit the requested algorithm. + * + * \retval #PSA_ERROR_NOT_SUPPORTED \emptydescription + * \retval #PSA_ERROR_INVALID_ARGUMENT \emptydescription + * \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription + * \retval #PSA_ERROR_COMMUNICATION_FAILURE \emptydescription + * \retval #PSA_ERROR_HARDWARE_FAILURE \emptydescription + * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription + * \retval #PSA_ERROR_STORAGE_FAILURE \emptydescription + * \retval PSA_ERROR_DATA_CORRUPT \emptydescription + * \retval PSA_ERROR_DATA_INVALID \emptydescription + * \retval #PSA_ERROR_BAD_STATE + * The library has not been previously initialized by psa_crypto_init(). + * It is implementation-dependent whether a failure to initialize + * results in this error code. + */ +psa_status_t psa_verify_hash_start( + psa_verify_hash_interruptible_operation_t *operation, + mbedtls_svc_key_id_t key, psa_algorithm_t alg, + const uint8_t *hash, size_t hash_length, + const uint8_t *signature, size_t signature_length); + +/** + * \brief Continue and eventually complete the action of + * reading and verifying a hash or short message + * signed with a private key, in an interruptible + * manner. + * + * \see \c psa_verify_hash_start() + * + * \warning This is a beta API, and thus subject to change + * at any point. It is not bound by the usual + * interface stability promises. + * + * \note This function combined with \c + * psa_verify_hash_start() is equivalent to + * \c psa_verify_hash() but this function can + * return early and resume according to the limit + * set with \c psa_interruptible_set_max_ops() to + * reduce the maximum time spent in a function + * call. + * + * \note Users should call this function on the same + * operation object repeatedly until it either + * returns 0 or an error. This function will return + * #PSA_OPERATION_INCOMPLETE if there is more work + * to do. Alternatively users can call + * \c psa_verify_hash_abort() at any point if they + * no longer want the result. + * + * \note When this function returns successfully, the + * operation becomes inactive. If this function + * returns an error status, the operation enters an + * error state and must be aborted by calling + * \c psa_verify_hash_abort(). + * + * \param[in, out] operation The \c psa_verify_hash_interruptible_operation_t + * to use. This must be initialized first, and have + * had \c psa_verify_hash_start() called with it + * first. + * + * \retval #PSA_SUCCESS + * Operation completed successfully, and the passed signature is valid. + * + * \retval #PSA_OPERATION_INCOMPLETE + * Operation was interrupted due to the setting of \c + * psa_interruptible_set_max_ops(). There is still work to be done. + * Call this function again with the same operation object. + * + * \retval #PSA_ERROR_INVALID_HANDLE \emptydescription + * \retval #PSA_ERROR_INVALID_SIGNATURE + * The calculation was performed successfully, but the passed + * signature is not a valid signature. + * \retval #PSA_ERROR_BAD_STATE + * An operation was not previously started on this context via + * \c psa_verify_hash_start(). + * \retval #PSA_ERROR_NOT_SUPPORTED \emptydescription + * \retval #PSA_ERROR_INVALID_ARGUMENT \emptydescription + * \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription + * \retval #PSA_ERROR_COMMUNICATION_FAILURE \emptydescription + * \retval #PSA_ERROR_HARDWARE_FAILURE \emptydescription + * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription + * \retval #PSA_ERROR_STORAGE_FAILURE \emptydescription + * \retval #PSA_ERROR_DATA_CORRUPT \emptydescription + * \retval #PSA_ERROR_DATA_INVALID \emptydescription + * \retval #PSA_ERROR_INSUFFICIENT_ENTROPY \emptydescription + * \retval #PSA_ERROR_BAD_STATE + * The library has either not been previously initialized by + * psa_crypto_init() or you did not previously call + * psa_verify_hash_start() on this object. It is + * implementation-dependent whether a failure to initialize results in + * this error code. + */ +psa_status_t psa_verify_hash_complete( + psa_verify_hash_interruptible_operation_t *operation); + +/** + * \brief Abort a verify hash operation. + * + * \warning This is a beta API, and thus subject to change at + * any point. It is not bound by the usual interface + * stability promises. + * + * \note This function is the only function that clears the + * number of ops completed as part of the operation. + * Please ensure you copy this value via + * \c psa_verify_hash_get_num_ops() if required + * before calling. + * + * \note Aborting an operation frees all associated + * resources except for the operation structure + * itself. Once aborted, the operation object can be + * reused for another operation by calling \c + * psa_verify_hash_start() again. + * + * \note You may call this function any time after the + * operation object has been initialized. + * In particular, calling \c psa_verify_hash_abort() + * after the operation has already been terminated by + * a call to \c psa_verify_hash_abort() or + * psa_verify_hash_complete() is safe. + * + * \param[in,out] operation Initialized verify hash operation. + * + * \retval #PSA_SUCCESS + * The operation was aborted successfully. + * + * \retval #PSA_ERROR_NOT_SUPPORTED \emptydescription + * \retval #PSA_ERROR_BAD_STATE + * The library has not been previously initialized by psa_crypto_init(). + * It is implementation-dependent whether a failure to initialize + * results in this error code. + */ +psa_status_t psa_verify_hash_abort( + psa_verify_hash_interruptible_operation_t *operation); + + +/**@}*/ + +#ifdef __cplusplus +} +#endif + +/* The file "crypto_sizes.h" contains definitions for size calculation + * macros whose definitions are implementation-specific. */ +#include "crypto_sizes.h" + +/* The file "crypto_struct.h" contains definitions for + * implementation-specific structs that are declared above. */ +#if defined(MBEDTLS_PSA_CRYPTO_STRUCT_FILE) +#include MBEDTLS_PSA_CRYPTO_STRUCT_FILE +#else +#include "crypto_struct.h" +#endif + +/* The file "crypto_extra.h" contains vendor-specific definitions. This + * can include vendor-defined algorithms, extra functions, etc. */ +#include "crypto_extra.h" + +#endif /* PSA_CRYPTO_H */ diff --git a/nrfdemo/build/tfm/api_ns/interface/include/psa/crypto_client_struct.h b/nrfdemo/build/tfm/api_ns/interface/include/psa/crypto_client_struct.h new file mode 100644 index 0000000..bf95c98 --- /dev/null +++ b/nrfdemo/build/tfm/api_ns/interface/include/psa/crypto_client_struct.h @@ -0,0 +1,48 @@ +/* + * Copyright (c) 2020-2021, Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: BSD-3-Clause + * + */ +/** + * \file psa/crypto_client_struct.h + * + * \brief PSA cryptography client key attribute definitions + * + * \note This file may not be included directly. Applications must + * include psa/crypto.h. + * + * This file contains the definitions of some data structures with + * PSA crypto client specific definitions. This is for implementations + * with isolation between the Client applications and the Crypto + * Server module, it is expected that the front-end and the back-end + * would have different versions of the data structure. + */ +#ifndef PSA_CRYPTO_CLIENT_STRUCT_H +#define PSA_CRYPTO_CLIENT_STRUCT_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* This is the client view of the `key_attributes` structure. Only + * fields which need to be set by the PSA crypto client are present. + * The PSA crypto service will maintain a different version of the + * data structure internally. */ +struct psa_client_key_attributes_s +{ + uint16_t type; + uint16_t bits; + uint32_t lifetime; + psa_key_id_t id; + uint32_t usage; + uint32_t alg; +}; + +#define PSA_CLIENT_KEY_ATTRIBUTES_INIT {0, 0, 0, 0, 0, 0} + +#ifdef __cplusplus +} +#endif + +#endif /* PSA_CRYPTO_CLIENT_STRUCT_H */ diff --git a/nrfdemo/build/tfm/api_ns/interface/include/psa/crypto_compat.h b/nrfdemo/build/tfm/api_ns/interface/include/psa/crypto_compat.h new file mode 100644 index 0000000..c21649d --- /dev/null +++ b/nrfdemo/build/tfm/api_ns/interface/include/psa/crypto_compat.h @@ -0,0 +1,155 @@ +/* + * Copyright (c) 2019-2023, Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: BSD-3-Clause + * + */ +/** + * \file psa/crypto_compat.h + * + * \brief PSA cryptography module: Backward compatibility aliases + * + * This header declares alternative names for macro and functions. + * New application code should not use these names. + * These names may be removed in a future version of Mbed Crypto. + * + * \note This file may not be included directly. Applications must + * include psa/crypto.h. + */ + +#ifndef PSA_CRYPTO_COMPAT_H +#define PSA_CRYPTO_COMPAT_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* + * To support both openless APIs and psa_open_key() temporarily, define + * psa_key_handle_t to be equal to mbedtls_svc_key_id_t. Do not mark the + * type and its utility macros and functions deprecated yet. This will be done + * in a subsequent phase. + */ +typedef mbedtls_svc_key_id_t psa_key_handle_t; + +#define PSA_KEY_HANDLE_INIT MBEDTLS_SVC_KEY_ID_INIT + +/** Check whether a handle is null. + * + * \param handle Handle + * + * \return Non-zero if the handle is null, zero otherwise. + */ +static inline int psa_key_handle_is_null(psa_key_handle_t handle) +{ + return mbedtls_svc_key_id_is_null(handle); +} + +/** Open a handle to an existing persistent key. + * + * Open a handle to a persistent key. A key is persistent if it was created + * with a lifetime other than #PSA_KEY_LIFETIME_VOLATILE. A persistent key + * always has a nonzero key identifier, set with psa_set_key_id() when + * creating the key. Implementations may provide additional pre-provisioned + * keys that can be opened with psa_open_key(). Such keys have an application + * key identifier in the vendor range, as documented in the description of + * #psa_key_id_t. + * + * The application must eventually close the handle with psa_close_key() or + * psa_destroy_key() to release associated resources. If the application dies + * without calling one of these functions, the implementation should perform + * the equivalent of a call to psa_close_key(). + * + * Some implementations permit an application to open the same key multiple + * times. If this is successful, each call to psa_open_key() will return a + * different key handle. + * + * \note This API is not part of the PSA Cryptography API Release 1.0.0 + * specification. It was defined in the 1.0 Beta 3 version of the + * specification but was removed in the 1.0.0 released version. This API is + * kept for the time being to not break applications relying on it. It is not + * deprecated yet but will be in the near future. + * + * \note Applications that rely on opening a key multiple times will not be + * portable to implementations that only permit a single key handle to be + * opened. See also :ref:\`key-handles\`. + * + * + * \param key The persistent identifier of the key. + * \param[out] handle On success, a handle to the key. + * + * \retval #PSA_SUCCESS + * Success. The application can now use the value of `*handle` + * to access the key. + * \retval #PSA_ERROR_INSUFFICIENT_MEMORY + * The implementation does not have sufficient resources to open the + * key. This can be due to reaching an implementation limit on the + * number of open keys, the number of open key handles, or available + * memory. + * \retval #PSA_ERROR_DOES_NOT_EXIST + * There is no persistent key with key identifier \p key. + * \retval #PSA_ERROR_INVALID_ARGUMENT + * \p key is not a valid persistent key identifier. + * \retval #PSA_ERROR_NOT_PERMITTED + * The specified key exists, but the application does not have the + * permission to access it. Note that this specification does not + * define any way to create such a key, but it may be possible + * through implementation-specific means. + * \retval #PSA_ERROR_COMMUNICATION_FAILURE \emptydescription + * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription + * \retval #PSA_ERROR_STORAGE_FAILURE \emptydescription + * \retval #PSA_ERROR_DATA_INVALID \emptydescription + * \retval #PSA_ERROR_DATA_CORRUPT \emptydescription + * \retval #PSA_ERROR_BAD_STATE + * The library has not been previously initialized by psa_crypto_init(). + * It is implementation-dependent whether a failure to initialize + * results in this error code. + */ +psa_status_t psa_open_key(mbedtls_svc_key_id_t key, + psa_key_handle_t *handle); + +/** Close a key handle. + * + * If the handle designates a volatile key, this will destroy the key material + * and free all associated resources, just like psa_destroy_key(). + * + * If this is the last open handle to a persistent key, then closing the handle + * will free all resources associated with the key in volatile memory. The key + * data in persistent storage is not affected and can be opened again later + * with a call to psa_open_key(). + * + * Closing the key handle makes the handle invalid, and the key handle + * must not be used again by the application. + * + * \note This API is not part of the PSA Cryptography API Release 1.0.0 + * specification. It was defined in the 1.0 Beta 3 version of the + * specification but was removed in the 1.0.0 released version. This API is + * kept for the time being to not break applications relying on it. It is not + * deprecated yet but will be in the near future. + * + * \note If the key handle was used to set up an active + * :ref:\`multipart operation <multipart-operations>\`, then closing the + * key handle can cause the multipart operation to fail. Applications should + * maintain the key handle until after the multipart operation has finished. + * + * \param handle The key handle to close. + * If this is \c 0, do nothing and return \c PSA_SUCCESS. + * + * \retval #PSA_SUCCESS + * \p handle was a valid handle or \c 0. It is now closed. + * \retval #PSA_ERROR_INVALID_HANDLE + * \p handle is not a valid handle nor \c 0. + * \retval #PSA_ERROR_COMMUNICATION_FAILURE \emptydescription + * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription + * \retval #PSA_ERROR_BAD_STATE + * The library has not been previously initialized by psa_crypto_init(). + * It is implementation-dependent whether a failure to initialize + * results in this error code. + */ +psa_status_t psa_close_key(psa_key_handle_t handle); + +#ifdef __cplusplus +} +#endif + +#endif /* PSA_CRYPTO_COMPAT_H */ diff --git a/nrfdemo/build/tfm/api_ns/interface/include/psa/crypto_extra.h b/nrfdemo/build/tfm/api_ns/interface/include/psa/crypto_extra.h new file mode 100644 index 0000000..6709b7b --- /dev/null +++ b/nrfdemo/build/tfm/api_ns/interface/include/psa/crypto_extra.h @@ -0,0 +1,1495 @@ +/* + * Copyright (c) 2018-2023, Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: BSD-3-Clause + * + */ +/** + * \file psa/crypto_extra.h + * + * \brief PSA cryptography module: vendor extensions + * + * \note This file may not be included directly. Applications must + * include psa/crypto.h. + * + * This file is reserved for vendor-specific definitions. + */ + +#ifndef PSA_CRYPTO_EXTRA_H +#define PSA_CRYPTO_EXTRA_H + +#include "crypto_types.h" +#include "crypto_compat.h" + +#ifdef __cplusplus +extern "C" { +#endif + +/** \addtogroup crypto_types + * @{ + */ + +/** DSA public key. + * + * The import and export format is the + * representation of the public key `y = g^x mod p` as a big-endian byte + * string. The length of the byte string is the length of the base prime `p` + * in bytes. + */ +#define PSA_KEY_TYPE_DSA_PUBLIC_KEY ((psa_key_type_t) 0x4002) + +/** DSA key pair (private and public key). + * + * The import and export format is the + * representation of the private key `x` as a big-endian byte string. The + * length of the byte string is the private key size in bytes (leading zeroes + * are not stripped). + * + * Deterministic DSA key derivation with psa_generate_derived_key follows + * FIPS 186-4 §B.1.2: interpret the byte string as integer + * in big-endian order. Discard it if it is not in the range + * [0, *N* - 2] where *N* is the boundary of the private key domain + * (the prime *p* for Diffie-Hellman, the subprime *q* for DSA, + * or the order of the curve's base point for ECC). + * Add 1 to the resulting integer and use this as the private key *x*. + * + */ +#define PSA_KEY_TYPE_DSA_KEY_PAIR ((psa_key_type_t) 0x7002) + +/** Whether a key type is a DSA key (pair or public-only). */ +#define PSA_KEY_TYPE_IS_DSA(type) \ + (PSA_KEY_TYPE_PUBLIC_KEY_OF_KEY_PAIR(type) == PSA_KEY_TYPE_DSA_PUBLIC_KEY) + +#define PSA_ALG_DSA_BASE ((psa_algorithm_t) 0x06000400) +/** DSA signature with hashing. + * + * This is the signature scheme defined by FIPS 186-4, + * with a random per-message secret number (*k*). + * + * \param hash_alg A hash algorithm (\c PSA_ALG_XXX value such that + * #PSA_ALG_IS_HASH(\p hash_alg) is true). + * This includes #PSA_ALG_ANY_HASH + * when specifying the algorithm in a usage policy. + * + * \return The corresponding DSA signature algorithm. + * \return Unspecified if \p hash_alg is not a supported + * hash algorithm. + */ +#define PSA_ALG_DSA(hash_alg) \ + (PSA_ALG_DSA_BASE | ((hash_alg) & PSA_ALG_HASH_MASK)) +#define PSA_ALG_DETERMINISTIC_DSA_BASE ((psa_algorithm_t) 0x06000500) +#define PSA_ALG_DSA_DETERMINISTIC_FLAG PSA_ALG_ECDSA_DETERMINISTIC_FLAG +/** Deterministic DSA signature with hashing. + * + * This is the deterministic variant defined by RFC 6979 of + * the signature scheme defined by FIPS 186-4. + * + * \param hash_alg A hash algorithm (\c PSA_ALG_XXX value such that + * #PSA_ALG_IS_HASH(\p hash_alg) is true). + * This includes #PSA_ALG_ANY_HASH + * when specifying the algorithm in a usage policy. + * + * \return The corresponding DSA signature algorithm. + * \return Unspecified if \p hash_alg is not a supported + * hash algorithm. + */ +#define PSA_ALG_DETERMINISTIC_DSA(hash_alg) \ + (PSA_ALG_DETERMINISTIC_DSA_BASE | ((hash_alg) & PSA_ALG_HASH_MASK)) +#define PSA_ALG_IS_DSA(alg) \ + (((alg) & ~PSA_ALG_HASH_MASK & ~PSA_ALG_DSA_DETERMINISTIC_FLAG) == \ + PSA_ALG_DSA_BASE) +#define PSA_ALG_DSA_IS_DETERMINISTIC(alg) \ + (((alg) & PSA_ALG_DSA_DETERMINISTIC_FLAG) != 0) +#define PSA_ALG_IS_DETERMINISTIC_DSA(alg) \ + (PSA_ALG_IS_DSA(alg) && PSA_ALG_DSA_IS_DETERMINISTIC(alg)) +#define PSA_ALG_IS_RANDOMIZED_DSA(alg) \ + (PSA_ALG_IS_DSA(alg) && !PSA_ALG_DSA_IS_DETERMINISTIC(alg)) + + +/* We need to expand the sample definition of this macro from + * the API definition. */ +#undef PSA_ALG_IS_VENDOR_HASH_AND_SIGN +#define PSA_ALG_IS_VENDOR_HASH_AND_SIGN(alg) \ + PSA_ALG_IS_DSA(alg) + +/* Workaround for build warnings when MBed TLS has enabled MBEDTLS_USE_PSA_CRYPTO + * + * Mbed TLS is not compatible with TF-Ms PSA API headers. + * + * In order to prevent build warnings for the follow functions we add the + * prototypes for them here. + * If the application tries to link with these functions it will get a link-time + * error. This use-case is not supported by TF-M. + */ +void psa_set_key_enrollment_algorithm( + psa_key_attributes_t *attributes, + psa_algorithm_t alg2); +psa_algorithm_t psa_get_key_enrollment_algorithm( + const psa_key_attributes_t *attributes); + + +#define PSA_KEY_TYPE_SPAKE2P_KEY_PAIR_BASE ((psa_key_type_t) 0x7400) +#define PSA_KEY_TYPE_SPAKE2P_PUBLIC_KEY_BASE ((psa_key_type_t) 0x4400) +#define PSA_KEY_TYPE_SPAKE2P_CURVE_MASK ((psa_key_type_t) 0x00ff) + + /** SPAKE2+ key pair. Both the prover and verifier key. + * + * The size of a SPAKE2+ key is the size associated with the elliptic curve + * group. See the documentation of each elliptic curve family for details. + * To construct a SPAKE2+ key pair, it must be output from a key derivation + * operation. + * The corresponding public key can be exported using psa_export_public_key(). + * See also #PSA_KEY_TYPE_SPAKE2P_PUBLIC_KEY(). + * + * \param curve A value of type psa_ecc_family_t that identifies the elliptic + * curve family to be used. + */ +#define PSA_KEY_TYPE_SPAKE2P_KEY_PAIR(curve) \ + ((psa_key_type_t) (PSA_KEY_TYPE_SPAKE2P_KEY_PAIR_BASE | (curve))) + + /** SPAKE2+ public key. The verifier key. + * + * The size of an SPAKE2+ public key is the same as the corresponding private + * key. See #PSA_KEY_TYPE_SPAKE2P_KEY_PAIR() and the documentation of each + * elliptic curve family for details. + * To construct a SPAKE2+ public key, it must be imported. + * + * \param curve A value of type psa_ecc_family_t that identifies the elliptic + * curve family to be used. + */ +#define PSA_KEY_TYPE_SPAKE2P_PUBLIC_KEY(curve) \ + ((psa_key_type_t) (PSA_KEY_TYPE_SPAKE2P_PUBLIC_KEY_BASE | (curve))) + + /** Whether a key type is a SPAKE2+ key (pair or public-only). */ +#define PSA_KEY_TYPE_IS_SPAKE2P(type) \ + ((PSA_KEY_TYPE_PUBLIC_KEY_OF_KEY_PAIR(type) & \ + ~PSA_KEY_TYPE_SPAKE2P_CURVE_MASK) == \ + PSA_KEY_TYPE_SPAKE2P_PUBLIC_KEY_BASE) + /** Whether a key type is a SPAKE2+ key pair. */ +#define PSA_KEY_TYPE_IS_SPAKE2P_KEY_PAIR(type) \ + (((type) & ~PSA_KEY_TYPE_SPAKE2P_CURVE_MASK) == \ + PSA_KEY_TYPE_SPAKE2P_KEY_PAIR_BASE) + /** Whether a key type is a SPAKE2+ public key. */ +#define PSA_KEY_TYPE_IS_SPAKE2P_PUBLIC_KEY(type) \ + (((type) & ~PSA_KEY_TYPE_SPAKE2P_CURVE_MASK) == \ + PSA_KEY_TYPE_SPAKE2P_PUBLIC_KEY_BASE) + /** Extract the curve from a SPAKE2+ key type. */ +#define PSA_KEY_TYPE_SPAKE2P_GET_FAMILY(type) \ + ((psa_ecc_family_t) (PSA_KEY_TYPE_IS_SPAKE2P(type) ? \ + ((type) & PSA_KEY_TYPE_SPAKE2P_CURVE_MASK) : \ + 0)) + +#define PSA_KEY_TYPE_SRP_KEY_PAIR_BASE ((psa_key_type_t) 0x7700) +#define PSA_KEY_TYPE_SRP_PUBLIC_KEY_BASE ((psa_key_type_t) 0x4700) +#define PSA_KEY_TYPE_SRP_GROUP_MASK ((psa_key_type_t) 0x00ff) + + /** SRP key pair. Both the client and server key. + * + * The size of a SRP key is the size associated with the Diffie-Hellman + * group. See the documentation of each Diffie-Hellman group for details. + * To construct a SRP key pair, the password hash must be imported. + * The corresponding public key (password verifier) can be exported using + * psa_export_public_key(). See also #PSA_KEY_TYPE_SRP_PUBLIC_KEY(). + * + * \param group A value of type ::psa_dh_family_t that identifies the + * Diffie-Hellman group to be used. + */ +#define PSA_KEY_TYPE_SRP_KEY_PAIR(group) \ + ((psa_key_type_t) (PSA_KEY_TYPE_SRP_KEY_PAIR_BASE | (group))) + + /** SRP public key. The server key (password verifier). + * + * The size of an SRP public key is the same as the corresponding private + * key. See #PSA_KEY_TYPE_SRP_KEY_PAIR() and the documentation of each + * Diffie-Hellman group for details. + * To construct a SRP public key, it must be imported. The key size + * in attributes must not be zero. + * + * \param group A value of type ::psa_dh_family_t that identifies the + * Diffie-Hellman group to be used. + */ +#define PSA_KEY_TYPE_SRP_PUBLIC_KEY(group) \ + ((psa_key_type_t) (PSA_KEY_TYPE_SRP_PUBLIC_KEY_BASE | (group))) + + /** Whether a key type is a SRP key (pair or public-only). */ +#define PSA_KEY_TYPE_IS_SRP(type) \ + ((PSA_KEY_TYPE_PUBLIC_KEY_OF_KEY_PAIR(type) & \ + ~PSA_KEY_TYPE_SRP_GROUP_MASK) == \ + PSA_KEY_TYPE_SRP_PUBLIC_KEY_BASE) + /** Whether a key type is a SRP key pair. */ +#define PSA_KEY_TYPE_IS_SRP_KEY_PAIR(type) \ + (((type) & ~PSA_KEY_TYPE_SRP_GROUP_MASK) == \ + PSA_KEY_TYPE_SRP_KEY_PAIR_BASE) + /** Whether a key type is a SRP public key. */ +#define PSA_KEY_TYPE_IS_SRP_PUBLIC_KEY(type) \ + (((type) & ~PSA_KEY_TYPE_SRP_GROUP_MASK) == \ + PSA_KEY_TYPE_SRP_PUBLIC_KEY_BASE) + /** Extract the curve from a SRP key type. */ +#define PSA_KEY_TYPE_SRP_GET_FAMILY(type) \ + ((psa_ecc_family_t) (PSA_KEY_TYPE_IS_SRP(type) ? \ + ((type) & PSA_KEY_TYPE_SRP_GROUP_MASK) : \ + 0)) + +#define PSA_ALG_CATEGORY_PAKE ((psa_algorithm_t) 0x0a000000) + +/** Whether the specified algorithm is a password-authenticated key exchange. + * + * \param alg An algorithm identifier (value of type #psa_algorithm_t). + * + * \return 1 if \p alg is a password-authenticated key exchange (PAKE) + * algorithm, 0 otherwise. + * This macro may return either 0 or 1 if \p alg is not a supported + * algorithm identifier. + */ +#define PSA_ALG_IS_PAKE(alg) \ + (((alg) & PSA_ALG_CATEGORY_MASK) == PSA_ALG_CATEGORY_PAKE) + +/** The Password-authenticated key exchange by juggling (J-PAKE) algorithm. + * + * This is J-PAKE as defined by RFC 8236, instantiated with the following + * parameters: + * + * - The group can be either an elliptic curve or defined over a finite field. + * - Schnorr NIZK proof as defined by RFC 8235 and using the same group as the + * J-PAKE algorithm. + * - A cryptographic hash function. + * + * To select these parameters and set up the cipher suite, call these functions + * in any order: + * + * \code + * psa_pake_cs_set_algorithm(cipher_suite, PSA_ALG_JPAKE(hash)); + * psa_pake_cs_set_primitive(cipher_suite, + * PSA_PAKE_PRIMITIVE(type, family, bits)); + * \endcode + * + * For more information on how to set a specific curve or field, refer to the + * documentation of the individual \c PSA_PAKE_PRIMITIVE_TYPE_XXX constants. + * + * After initializing a J-PAKE operation, call + * + * \code + * psa_pake_setup(operation, key, cipher_suite); + * psa_pake_set_user(operation, ...); + * psa_pake_set_peer(operation, ...); + * \endcode + * + * The password is provided as a key. This can be the password text itself, + * in an agreed character encoding, or some value derived from the password + * as required by a higher level protocol. + * + * (The implementation converts the key material to a number as described in + * Section 2.3.8 of _SEC 1: Elliptic Curve Cryptography_ + * (https://www.secg.org/sec1-v2.pdf), before reducing it modulo \c q. Here + * \c q is order of the group defined by the primitive set in the cipher suite. + * The \c psa_pake_setup() function returns an error if the result of the + * reduction is 0.) + * + * The key exchange flow for J-PAKE is as follows: + * -# To get the first round data that needs to be sent to the peer, call + * \code + * // Get g1 + * psa_pake_output(operation, #PSA_PAKE_STEP_KEY_SHARE, ...); + * // Get the ZKP public key for x1 + * psa_pake_output(operation, #PSA_PAKE_STEP_ZK_PUBLIC, ...); + * // Get the ZKP proof for x1 + * psa_pake_output(operation, #PSA_PAKE_STEP_ZK_PROOF, ...); + * // Get g2 + * psa_pake_output(operation, #PSA_PAKE_STEP_KEY_SHARE, ...); + * // Get the ZKP public key for x2 + * psa_pake_output(operation, #PSA_PAKE_STEP_ZK_PUBLIC, ...); + * // Get the ZKP proof for x2 + * psa_pake_output(operation, #PSA_PAKE_STEP_ZK_PROOF, ...); + * \endcode + * -# To provide the first round data received from the peer to the operation, + * call + * \code + * // Set g3 + * psa_pake_input(operation, #PSA_PAKE_STEP_KEY_SHARE, ...); + * // Set the ZKP public key for x3 + * psa_pake_input(operation, #PSA_PAKE_STEP_ZK_PUBLIC, ...); + * // Set the ZKP proof for x3 + * psa_pake_input(operation, #PSA_PAKE_STEP_ZK_PROOF, ...); + * // Set g4 + * psa_pake_input(operation, #PSA_PAKE_STEP_KEY_SHARE, ...); + * // Set the ZKP public key for x4 + * psa_pake_input(operation, #PSA_PAKE_STEP_ZK_PUBLIC, ...); + * // Set the ZKP proof for x4 + * psa_pake_input(operation, #PSA_PAKE_STEP_ZK_PROOF, ...); + * \endcode + * -# To get the second round data that needs to be sent to the peer, call + * \code + * // Get A + * psa_pake_output(operation, #PSA_PAKE_STEP_KEY_SHARE, ...); + * // Get ZKP public key for x2*s + * psa_pake_output(operation, #PSA_PAKE_STEP_ZK_PUBLIC, ...); + * // Get ZKP proof for x2*s + * psa_pake_output(operation, #PSA_PAKE_STEP_ZK_PROOF, ...); + * \endcode + * -# To provide the second round data received from the peer to the operation, + * call + * \code + * // Set B + * psa_pake_input(operation, #PSA_PAKE_STEP_KEY_SHARE, ...); + * // Set ZKP public key for x4*s + * psa_pake_input(operation, #PSA_PAKE_STEP_ZK_PUBLIC, ...); + * // Set ZKP proof for x4*s + * psa_pake_input(operation, #PSA_PAKE_STEP_ZK_PROOF, ...); + * \endcode + * -# To access the shared secret call + * \code + * // Get Ka=Kb=K + * psa_pake_get_shared_key() + * \endcode + * + * For more information consult the documentation of the individual + * \c PSA_PAKE_STEP_XXX constants. + * + * At this point there is a cryptographic guarantee that only the authenticated + * party who used the same password is able to compute the key. But there is no + * guarantee that the peer is the party it claims to be and was able to do so. + * + * That is, the authentication is only implicit (the peer is not authenticated + * at this point, and no action should be taken that assume that they are - like + * for example accessing restricted files). + * + * To make the authentication explicit there are various methods, see Section 5 + * of RFC 8236 for two examples. + * + */ +#define PSA_ALG_JPAKE_BASE ((psa_algorithm_t) 0x0a000100) +#define PSA_ALG_JPAKE(hash_alg) (PSA_ALG_JPAKE_BASE | ((hash_alg) & PSA_ALG_HASH_MASK)) +#define PSA_ALG_IS_JPAKE(alg) (((alg) & ~PSA_ALG_HASH_MASK) == PSA_ALG_JPAKE_BASE) + + /** The SPAKE2+ algorithm. + * + * SPAKE2+ is the augmented password-authenticated key exchange protocol, + * defined by RFC9383. SPAKE2+ includes confirmation of the shared secret + * key that results from the key exchange. + * SPAKE2+ is required by Matter Specification, Version 1.2, as MATTER_PAKE. + * Matter uses an earlier draft of the SPAKE2+ protocol: "SPAKE2+, an + * Augmented PAKE (Draft 02)". + * Although the operation of the PAKE is similar for both of these variants, + * they have different key schedules for the derivation of the shared secret. + * + * When setting up a PAKE cipher suite to use the SPAKE2+ protocol defined + * in RFC9383: + * - For cipher-suites that use HMAC for key confirmation, use the + * PSA_ALG_SPAKE2P_HMAC() algorithm, parameterized by the required hash + * algorithm. + * - For cipher-suites that use CMAC-AES-128 for key confirmation, use the + * PSA_ALG_SPAKE2P_CMAC() algorithm, parameterized by the required hash + * algorithm. + * - Use a PAKE primitive for the required elliptic curve. + * + * For example, the following code creates a cipher suite to select SPAKE2+ + * using edwards25519 with the SHA-256 hash function: + * + * \code + * psa_pake_cipher_suite_t cipher_suite = PSA_PAKE_CIPHER_SUITE_INIT; + * psa_pake_cs_set_algorithm(cipher_suite, PSA_ALG_SPAKE2P_HMAC(PSA_ALG_SHA_256)); + * psa_pake_cs_set_primitive(&cipher_suite, + * PSA_PAKE_PRIMITIVE(PSA_PAKE_PRIMITIVE_TYPE_ECC, + * PSA_ECC_FAMILY_TWISTED_EDWARDS, 255)); + * \endcode + * + * When setting up a PAKE cipher suite to use the SPAKE2+ protocol used by + * Matter: + * - Use the PSA_ALG_SPAKE2P_MATTER algorithm. + * - Use the PSA_PAKE_PRIMITIVE(PSA_PAKE_PRIMITIVE_TYPE_ECC, + * PSA_ECC_FAMILY_SECP_R1, 256) + * PAKE primitive. + * + * The following code creates a cipher suite to select the Matter variant of + * SPAKE2+: + * + * \code + * psa_pake_cipher_suite_t cipher_suite = PSA_PAKE_CIPHER_SUITE_INIT; + * psa_pake_cs_set_algorithm(&cipher_suite, PSA_ALG_SPAKE2P_MATTER); + * psa_pake_cs_set_primitive(&cipher_suite, + * PSA_PAKE_PRIMITIVE(PSA_PAKE_PRIMITIVE_TYPE_ECC, + * PSA_ECC_FAMILY_SECP_R1, 256)); + * \endcode + * + * After initializing a SPAKE2+ operation, call + * + * \code + * psa_pake_setup(operation, password, cipher_suite); + * psa_pake_set_role(operation, ...); + * \endcode + * + * The password provided to the client side must be of type + * #PSA_KEY_TYPE_SPAKE2P_KEY_PAIR. + * The password provided to the server side must be of type + * #PSA_KEY_TYPE_SPAKE2P_PUBLIC_KEY. + * + * The role set by \c psa_pake_set_role() must be either + * \c PSA_PAKE_ROLE_CLIENT or \c PSA_PAKE_ROLE_SERVER. + * + * Then provide any additional, optional parameters: + * + * \code + * psa_pake_set_user(operation, ...); + * psa_pake_set_peer(operation, ...); + * psa_pake_set_context(operation, ...); + * \endcode + * + * + * The key exchange flow for a SPAKE2+ client is as follows: + * \code + * // send shareP + * psa_pake_output(operation, #PSA_PAKE_STEP_KEY_SHARE, ...); + * // receive shareV + * psa_pake_input(operation, #PSA_PAKE_STEP_KEY_SHARE, ...); + * // receive confirmV + * psa_pake_input(operation, #PSA_PAKE_STEP_CONFIRM, ...); + * // send confirmP + * psa_pake_output(operation, #PSA_PAKE_STEP_CONFIRM, ...); + * // get K_shared + * psa_pake_get_shared_key(operation, ...); + * \endcode + * + * The key exchange flow for a SPAKE2+ server is as follows: + * \code + * // receive shareP + * psa_pake_input(operation, #PSA_PAKE_STEP_KEY_SHARE, ...); + * // send shareV + * psa_pake_output(operation, #PSA_PAKE_STEP_KEY_SHARE, ...); + * // send confirmV + * psa_pake_output(operation, #PSA_PAKE_STEP_CONFIRM, ...); + * // receive confirmP + * psa_pake_input(operation, #PSA_PAKE_STEP_CONFIRM, ...); + * // get K_shared + * psa_pake_get_shared_key(operation, ...); + * \endcode + * + * The shared secret that is produced by SPAKE2+ is pseudorandom. Although + * it can be used directly as an encryption key, it is recommended to use + * the shared secret as an input to a key derivation operation to produce + * additional cryptographic keys. + */ +#define PSA_ALG_IS_SPAKE2P_HMAC_BASE ((psa_algorithm_t) 0x0a000400) +#define PSA_ALG_SPAKE2P_HMAC(hash_alg) (PSA_ALG_IS_SPAKE2P_HMAC_BASE | ((hash_alg) & PSA_ALG_HASH_MASK)) +#define PSA_ALG_IS_SPAKE2P_CMAC_BASE ((psa_algorithm_t) 0x0a000500) +#define PSA_ALG_SPAKE2P_CMAC(hash_alg) (PSA_ALG_IS_SPAKE2P_CMAC_BASE | ((hash_alg) & PSA_ALG_HASH_MASK)) +#define PSA_ALG_SPAKE2P_MATTER ((psa_algorithm_t) 0x0A000609) +#define PSA_ALG_IS_SPAKE2P(alg) (((alg) & ~0x000003ff) == PSA_ALG_IS_SPAKE2P_HMAC_BASE) +#define PSA_ALG_IS_SPAKE2P_HMAC(alg) (((alg) & ~PSA_ALG_HASH_MASK) == PSA_ALG_IS_SPAKE2P_HMAC_BASE) +#define PSA_ALG_IS_SPAKE2P_CMAC(alg) (((alg) & ~PSA_ALG_HASH_MASK) == PSA_ALG_IS_SPAKE2P_CMAC_BASE) + + /** The Secure Remote Passwort key exchange (SRP) algorithm. + * + * This is SRP-6 as defined by RFC 2945 and RFC 5054, instantiated with the + * following parameters: + * + * - The group is defined over a finite field using a secure prime. + * - A cryptographic hash function. + * + * To select these parameters and set up the cipher suite, call these functions: + * + * \code + * psa_pake_cipher_suite_t cipher_suite = PSA_PAKE_CIPHER_SUITE_INIT; + * psa_pake_cs_set_algorithm(cipher_suite, PSA_ALG_SRP_6(hash)); + * psa_pake_cs_set_primitive(&cipher_suite, + * PSA_PAKE_PRIMITIVE(type, family, bits)); + * \endcode + * + * After initializing a SRP operation, call: + * + * \code + * psa_pake_setup(operation, password, cipher_suite); + * psa_pake_set_role(operation, ...); + * psa_pake_set_user(operation, ...); + * \endcode + * + * The password provided to the client side must be of type + * #PSA_KEY_TYPE_SRP_KEY_PAIR. + * The password provided to the server side must be of type + * #PSA_KEY_TYPE_SRP_PUBLIC_KEY. + * + * The role set by \c psa_pake_set_role() must be either + * \c PSA_PAKE_ROLE_CLIENT or \c PSA_PAKE_ROLE_SERVER. + * + * For the SRP client key exchange call the following functions in any order: + * \code + * // get salt + * psa_pake_input(operation, #PSA_PAKE_STEP_SALT, ...); + * // get server key + * psa_pake_input(operation, #PSA_PAKE_STEP_KEY_SHARE, ...); + * // write client key + * psa_pake_output(operation, #PSA_PAKE_STEP_KEY_SHARE, ...); + * \endcode + * + * For the SRP server key exchange call the following functions in any order: + * \code + * // get salt + * psa_pake_input(operation, #PSA_PAKE_STEP_SALT, ...); + * // get client key + * psa_pake_input(operation, #PSA_PAKE_STEP_KEY_SHARE, ...); + * // write server key + * psa_pake_output(operation, #PSA_PAKE_STEP_KEY_SHARE, ...); + * \endcode + * + * For the client proof phase call the following functions in this order: + * \code + * // send M1 + * psa_pake_input(operation, #PSA_PAKE_STEP_CONFIRM, ...); + * // receive M2 + * psa_pake_output(operation, #PSA_PAKE_STEP_CONFIRM, ...); + * // Get secret + * psa_pake_get_shared_key() + * \endcode + * + * For the server proof phase call the following functions in this order: + * \code + * // receive M1 + * psa_pake_output(operation, #PSA_PAKE_STEP_CONFIRM, ...); + * // send M2 + * psa_pake_input(operation, #PSA_PAKE_STEP_CONFIRM, ...); + * // Get secret + * psa_pake_get_shared_key() + * \endcode + * + * The shared secret that is produced by SRP is pseudorandom. Although + * it can be used directly as an encryption key, it is recommended to use + * the shared secret as an input to a key derivation operation to produce + * additional cryptographic keys. + */ +#define PSA_ALG_SRP_6_BASE ((psa_algorithm_t) 0x0a000300) +#define PSA_ALG_SRP_6(hash_alg) (PSA_ALG_SRP_6_BASE | ((hash_alg) & PSA_ALG_HASH_MASK)) +#define PSA_ALG_IS_SRP_6(alg) (((alg) & ~PSA_ALG_HASH_MASK) == PSA_ALG_SRP_6_BASE) + +/** @} */ + +/** \defgroup pake Password-authenticated key exchange (PAKE) + * + * This is a proposed PAKE interface for the PSA Crypto API. It is not part of + * the official PSA Crypto API yet. + * + * \note The content of this section is not part of the stable API and ABI + * of Mbed TLS and may change arbitrarily from version to version. + * Same holds for the corresponding macros #PSA_ALG_CATEGORY_PAKE and + * #PSA_ALG_JPAKE. + * @{ + */ + +/** A value to indicate no role in a PAKE algorithm. + * This value can be used in a call to psa_pake_set_role() for symmetric PAKE + * algorithms which do not assign roles. + */ +#define PSA_PAKE_ROLE_NONE ((psa_pake_role_t) 0x00) + +/** The first peer in a balanced PAKE. + * + * Although balanced PAKE algorithms are symmetric, some of them need an + * ordering of peers for the transcript calculations. If the algorithm does not + * need this, both #PSA_PAKE_ROLE_FIRST and #PSA_PAKE_ROLE_SECOND are + * accepted. + */ +#define PSA_PAKE_ROLE_FIRST ((psa_pake_role_t) 0x01) + +/** The second peer in a balanced PAKE. + * + * Although balanced PAKE algorithms are symmetric, some of them need an + * ordering of peers for the transcript calculations. If the algorithm does not + * need this, either #PSA_PAKE_ROLE_FIRST or #PSA_PAKE_ROLE_SECOND are + * accepted. + */ +#define PSA_PAKE_ROLE_SECOND ((psa_pake_role_t) 0x02) + +/** The client in an augmented PAKE. + * + * Augmented PAKE algorithms need to differentiate between client and server. + */ +#define PSA_PAKE_ROLE_CLIENT ((psa_pake_role_t) 0x11) + +/** The server in an augmented PAKE. + * + * Augmented PAKE algorithms need to differentiate between client and server. + */ +#define PSA_PAKE_ROLE_SERVER ((psa_pake_role_t) 0x12) + +/** The PAKE primitive type indicating the use of elliptic curves. + * + * The values of the \c family and \c bits fields of the cipher suite identify a + * specific elliptic curve, using the same mapping that is used for ECC + * (::psa_ecc_family_t) keys. + * + * (Here \c family means the value returned by PSA_PAKE_PRIMITIVE_GET_FAMILY() and + * \c bits means the value returned by PSA_PAKE_PRIMITIVE_GET_BITS().) + * + * Input and output during the operation can involve group elements and scalar + * values: + * -# The format for group elements is the same as for public keys on the + * specific curve would be. For more information, consult the documentation of + * psa_export_public_key(). + * -# The format for scalars is the same as for private keys on the specific + * curve would be. For more information, consult the documentation of + * psa_export_key(). + */ +#define PSA_PAKE_PRIMITIVE_TYPE_ECC ((psa_pake_primitive_type_t) 0x01) + +/** The PAKE primitive type indicating the use of Diffie-Hellman groups. + * + * The values of the \c family and \c bits fields of the cipher suite identify + * a specific Diffie-Hellman group, using the same mapping that is used for + * Diffie-Hellman (::psa_dh_family_t) keys. + * + * (Here \c family means the value returned by PSA_PAKE_PRIMITIVE_GET_FAMILY() and + * \c bits means the value returned by PSA_PAKE_PRIMITIVE_GET_BITS().) + * + * Input and output during the operation can involve group elements and scalar + * values: + * -# The format for group elements is the same as for public keys on the + * specific group would be. For more information, consult the documentation of + * psa_export_public_key(). + * -# The format for scalars is the same as for private keys on the specific + * group would be. For more information, consult the documentation of + * psa_export_key(). + */ +#define PSA_PAKE_PRIMITIVE_TYPE_DH ((psa_pake_primitive_type_t) 0x02) + +/** Construct a PAKE primitive from type, family and bit-size. + * + * \param pake_type The type of the primitive + * (value of type ::psa_pake_primitive_type_t). + * \param pake_family The family of the primitive + * (the type and interpretation of this parameter depends + * on \p pake_type, for more information consult the + * documentation of individual ::psa_pake_primitive_type_t + * constants). + * \param pake_bits The bit-size of the primitive + * (Value of type \c size_t. The interpretation + * of this parameter depends on \p pake_family, for more + * information consult the documentation of individual + * ::psa_pake_primitive_type_t constants). + * + * \return The constructed primitive value of type ::psa_pake_primitive_t. + * Return 0 if the requested primitive can't be encoded as + * ::psa_pake_primitive_t. + */ +#define PSA_PAKE_PRIMITIVE(pake_type, pake_family, pake_bits) \ + (((pake_bits & 0xFFFF) != pake_bits) ? 0 : \ + ((psa_pake_primitive_t) (((pake_type) << 24 | \ + (pake_family) << 16) | (pake_bits)))) + +#define PSA_PAKE_PRIMITIVE_GET_BITS(pake_primitive) \ + ((size_t)(pake_primitive & 0xFFFF)) + +#define PSA_PAKE_PRIMITIVE_GET_FAMILY(pake_primitive) \ + ((psa_pake_family_t)((pake_primitive >> 16) & 0xFF)) + +#define PSA_PAKE_PRIMITIVE_GET_TYPE(pake_primitive) \ + ((psa_pake_primitive_type_t)((pake_primitive >> 24) & 0xFF)) + +/** A key confirmation value that indicates a confirmed key in a PAKE cipher + * suite. + * + * This key confirmation value will result in the PAKE algorithm exchanging + * data to verify that the shared key is identical for both parties. This is + * the default key confirmation value in an initialized PAKE cipher suite + * object. + * Some algorithms do not include confirmation of the shared key. + */ +#define PSA_PAKE_CONFIRMED_KEY 0 + +/** A key confirmation value that indicates an unconfirmed key in a PAKE cipher + * suite. + * + * This key confirmation value will result in the PAKE algorithm terminating + * prior to confirming that the resulting shared key is identical for both + * parties. + * Some algorithms do not support returning an unconfirmed shared key. + */ +#define PSA_PAKE_UNCONFIRMED_KEY 1 + + /** The key share being sent to or received from the peer. + * + * The format for both input and output at this step is the same as for public + * keys on the group determined by the primitive (::psa_pake_primitive_t) would + * be. + * + * For more information on the format, consult the documentation of + * psa_export_public_key(). + * + * For information regarding how the group is determined, consult the + * documentation #PSA_PAKE_PRIMITIVE. + */ +#define PSA_PAKE_STEP_KEY_SHARE ((psa_pake_step_t) 0x01) + +/** A Schnorr NIZKP public key. + * + * This is the ephemeral public key in the Schnorr Non-Interactive + * Zero-Knowledge Proof (the value denoted by the letter 'V' in RFC 8235). + * + * The format for both input and output at this step is the same as for public + * keys on the group determined by the primitive (::psa_pake_primitive_t) would + * be. + * + * For more information on the format, consult the documentation of + * psa_export_public_key(). + * + * For information regarding how the group is determined, consult the + * documentation #PSA_PAKE_PRIMITIVE. + */ +#define PSA_PAKE_STEP_ZK_PUBLIC ((psa_pake_step_t) 0x02) + +/** A Schnorr NIZKP proof. + * + * This is the proof in the Schnorr Non-Interactive Zero-Knowledge Proof (the + * value denoted by the letter 'r' in RFC 8235). + * + * Both for input and output, the value at this step is an integer less than + * the order of the group selected in the cipher suite. The format depends on + * the group as well: + * + * - For Montgomery curves, the encoding is little endian. + * - For everything else the encoding is big endian (see Section 2.3.8 of + * _SEC 1: Elliptic Curve Cryptography_ at https://www.secg.org/sec1-v2.pdf). + * + * In both cases leading zeroes are allowed as long as the length in bytes does + * not exceed the byte length of the group order. + * + * For information regarding how the group is determined, consult the + * documentation #PSA_PAKE_PRIMITIVE. + */ +#define PSA_PAKE_STEP_ZK_PROOF ((psa_pake_step_t) 0x03) + +/** The key confirmation value. + * + * This value is used during the key confirmation phase of a PAKE protocol. + * The format of the value depends on the algorithm and cipher suite: + * + * For SPAKE2+ algorithms, the format for both input and output at this step is + * the same as the output of the MAC algorithm specified in the cipher suite. + * + * For PSA_ALG_SRP_6, the format for both input and output at this step is + * the same as the output of the Hash algorithm specified. + */ +#define PSA_PAKE_STEP_CONFIRM ((psa_pake_step_t)0x04) + +/** The salt. + * + * The format for both input and output at this step is plain binary data. + */ +#define PSA_PAKE_STEP_SALT ((psa_pake_step_t)0x05) + +/** Retrieve the PAKE algorithm from a PAKE cipher suite. + * + * \param[in] cipher_suite The cipher suite structure to query. + * + * \return The PAKE algorithm stored in the cipher suite structure. + */ +static psa_algorithm_t psa_pake_cs_get_algorithm( + const psa_pake_cipher_suite_t *cipher_suite); + +/** Declare the PAKE algorithm for the cipher suite. + * + * This function overwrites any PAKE algorithm + * previously set in \p cipher_suite. + * + * \param[out] cipher_suite The cipher suite structure to write to. + * \param algorithm The PAKE algorithm to write. + * (`PSA_ALG_XXX` values of type ::psa_algorithm_t + * such that #PSA_ALG_IS_PAKE(\c alg) is true.) + * If this is 0, the PAKE algorithm in + * \p cipher_suite becomes unspecified. + */ +static void psa_pake_cs_set_algorithm(psa_pake_cipher_suite_t *cipher_suite, + psa_algorithm_t algorithm); + +/** Retrieve the primitive from a PAKE cipher suite. + * + * \param[in] cipher_suite The cipher suite structure to query. + * + * \return The primitive stored in the cipher suite structure. + */ +static psa_pake_primitive_t psa_pake_cs_get_primitive( + const psa_pake_cipher_suite_t *cipher_suite); + +/** Declare the primitive for a PAKE cipher suite. + * + * This function overwrites any primitive previously set in \p cipher_suite. + * + * \param[out] cipher_suite The cipher suite structure to write to. + * \param primitive The primitive to write. If this is 0, the + * primitive type in \p cipher_suite becomes + * unspecified. + */ +static void psa_pake_cs_set_primitive(psa_pake_cipher_suite_t *cipher_suite, + psa_pake_primitive_t primitive); + +/** The type of the state data structure for PAKE operations. + * + * Before calling any function on a PAKE operation object, the application + * must initialize it by any of the following means: + * - Set the structure to all-bits-zero, for example: + * \code + * psa_pake_operation_t operation; + * memset(&operation, 0, sizeof(operation)); + * \endcode + * - Initialize the structure to logical zero values, for example: + * \code + * psa_pake_operation_t operation = {0}; + * \endcode + * - Initialize the structure to the initializer #PSA_PAKE_OPERATION_INIT, + * for example: + * \code + * psa_pake_operation_t operation = PSA_PAKE_OPERATION_INIT; + * \endcode + * - Assign the result of the function psa_pake_operation_init() + * to the structure, for example: + * \code + * psa_pake_operation_t operation; + * operation = psa_pake_operation_init(); + * \endcode + * + * This is an implementation-defined \c struct. Applications should not + * make any assumptions about the content of this structure. + * Implementation details can change in future versions without notice. */ +typedef struct psa_pake_operation_s psa_pake_operation_t; + +/** Return an initial value for a PAKE operation object. + */ +static psa_pake_operation_t psa_pake_operation_init(void); + +/** Set the session information for a password-authenticated key exchange. + * + * The sequence of operations to set up a password-authenticated key exchange + * is as follows: + * -# Allocate an operation object which will be passed to all the functions + * listed here. + * -# Initialize the operation object with one of the methods described in the + * documentation for #psa_pake_operation_t, e.g. + * #PSA_PAKE_OPERATION_INIT. + * -# Call psa_pake_setup() to specify the password key and the cipher suite. + * -# Call \c psa_pake_set_xxx() functions on the operation to complete the + * setup. The exact sequence of \c psa_pake_set_xxx() functions that needs + * to be called depends on the algorithm in use. + * + * Refer to the documentation of individual PAKE algorithm types (`PSA_ALG_XXX` + * values of type ::psa_algorithm_t such that #PSA_ALG_IS_PAKE(\c alg) is true) + * for more information. + * + * A typical sequence of calls to perform a password-authenticated key + * exchange: + * -# Call psa_pake_output(operation, #PSA_PAKE_STEP_KEY_SHARE, ...) to get the + * key share that needs to be sent to the peer. + * -# Call psa_pake_input(operation, #PSA_PAKE_STEP_KEY_SHARE, ...) to provide + * the key share that was received from the peer. + * -# Depending on the algorithm additional calls to psa_pake_output() and + * psa_pake_input() might be necessary. + * -# Call psa_pake_get_shared_key() for accessing the shared secret. + * + * Refer to the documentation of individual PAKE algorithm types (`PSA_ALG_XXX` + * values of type ::psa_algorithm_t such that #PSA_ALG_IS_PAKE(\c alg) is true) + * for more information. + * + * If an error occurs at any step after a call to psa_pake_setup(), + * the operation will need to be reset by a call to psa_pake_abort(). The + * application may call psa_pake_abort() at any time after the operation + * has been initialized. + * + * After a successful call to psa_pake_setup(), the application must + * eventually terminate the operation. The following events terminate an + * operation: + * - A call to psa_pake_abort(). + * - A successful call to psa_pake_get_shared_key(). + * + * \param[in,out] operation The operation object to set up. It must have + * been initialized but not set up yet. + * \param[in] password_key Identifier of the key holding the password or + * a value derived from the password. It must + * remain valid until the operation terminates. + * The valid key types depend on the PAKE algorithm, + * and participant role. + * \param[in] cipher_suite The cipher suite to use. (A cipher suite fully + * characterizes a PAKE algorithm and determines + * the algorithm as well.) + * + * \retval #PSA_SUCCESS + * Success. + * \retval #PSA_ERROR_INVALID_HANDLE + * \p password_key is not a valid key identifier. + * \retval #PSA_ERROR_NOT_PERMITTED + * The key does not have the #PSA_KEY_USAGE_DERIVE flag, or it does not + * permit the \p operation's algorithm. + * \retval #PSA_ERROR_INVALID_ARGUMENT + * The algorithm in \p cipher_suite is not a PAKE algorithm or encodes + * an invalid hash algorithm, or the PAKE primitive in \p cipher_suite + * is not compatible with the PAKE algorithm, or the key confirmation + * value in \p cipher_suite is not compatible with the PAKE algorithm + * and primitive, or the \p password_key is not compatible with + * \p cipher_suite. + * \retval #PSA_ERROR_NOT_SUPPORTED + * The algorithm in \p cipher_suite is not a supported PAKE algorithm, + * or the PAKE primitive in \p cipher_suite is not supported or not + * compatible with the PAKE algorithm, or the key confirmation value + * in \p cipher_suite is not supported or not compatible with the PAKE + * algorithm and primitive, or the key type or key size of + * \p password_key is not supported with \p cipher_suite. + * \retval #PSA_ERROR_COMMUNICATION_FAILURE \emptydescription + * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription + * \retval #PSA_ERROR_BAD_STATE + * The operation state is not valid, or + * the library has not been previously initialized by psa_crypto_init(). + * It is implementation-dependent whether a failure to initialize + * results in this error code. + */ +psa_status_t psa_pake_setup(psa_pake_operation_t *operation, + mbedtls_svc_key_id_t password_key, + const psa_pake_cipher_suite_t *cipher_suite); + +/** Set the application role for a password-authenticated key exchange. +* +* Not all PAKE algorithms need to differentiate the communicating entities. +* It is optional to call this function for PAKEs that don't require a role +* to be specified. For such PAKEs the application role parameter is ignored, +* or #PSA_PAKE_ROLE_NONE can be passed as \c role. +* +* Refer to the documentation of individual PAKE algorithm types (`PSA_ALG_XXX` +* values of type ::psa_algorithm_t such that #PSA_ALG_IS_PAKE(\c alg) is true) +* for more information. +* +* \param[in,out] operation The operation object to specify the +* application's role for. It must have been set up +* by psa_pake_setup() and not yet in use (neither +* psa_pake_output() nor psa_pake_input() has been +* called yet). It must be an operation for which +* the application's role hasn't been specified +* (psa_pake_set_role() hasn't been called yet). +* \param role A value of type ::psa_pake_role_t indicating the +* application's role in the PAKE algorithm +* that is being set up. For more information see +* the documentation of \c PSA_PAKE_ROLE_XXX +* constants. +* +* \retval #PSA_SUCCESS +* Success. +* \retval #PSA_ERROR_INVALID_ARGUMENT +* The \p role is not a valid PAKE role in the \p operation’s algorithm. +* \retval #PSA_ERROR_NOT_SUPPORTED +* The \p role for this algorithm is not supported or is not valid. +* \retval #PSA_ERROR_COMMUNICATION_FAILURE \emptydescription +* \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription +* \retval #PSA_ERROR_BAD_STATE +* The operation state is not valid, or +* the library has not been previously initialized by psa_crypto_init(). +* It is implementation-dependent whether a failure to initialize +* results in this error code. +*/ +psa_status_t psa_pake_set_role(psa_pake_operation_t *operation, + psa_pake_role_t role); + +/** Set the user ID for a password-authenticated key exchange. + * + * Call this function to set the user ID. For PAKE algorithms that associate a + * user identifier with each side of the session you need to call + * psa_pake_set_peer() as well. For PAKE algorithms that associate a single + * user identifier with the session, call psa_pake_set_user() only. + * + * Refer to the documentation of individual PAKE algorithm types (`PSA_ALG_XXX` + * values of type ::psa_algorithm_t such that #PSA_ALG_IS_PAKE(\c alg) is true) + * for more information. + * + * \param[in,out] operation The operation object to set the user ID for. It + * must have been set up by psa_pake_setup() and + * not yet in use (neither psa_pake_output() nor + * psa_pake_input() has been called yet). It must + * be on operation for which the user ID hasn't + * been set (psa_pake_set_user() hasn't been + * called yet). + * \param[in] user_id The user ID to authenticate with. + * \param user_id_len Size of the \p user_id buffer in bytes. + * + * \retval #PSA_SUCCESS + * Success. + * \retval #PSA_ERROR_INVALID_ARGUMENT + * \p user_id is not valid for the \p operation's algorithm and cipher + * suite. + * \retval #PSA_ERROR_NOT_SUPPORTED + * The value of \p user_id is not supported by the implementation. + * \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription + * \retval #PSA_ERROR_COMMUNICATION_FAILURE \emptydescription + * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription + * \retval #PSA_ERROR_BAD_STATE + * The operation state is not valid, or + * the library has not been previously initialized by psa_crypto_init(). + * It is implementation-dependent whether a failure to initialize + * results in this error code. + */ +psa_status_t psa_pake_set_user(psa_pake_operation_t *operation, + const uint8_t *user_id, + size_t user_id_len); + +/** Set the peer ID for a password-authenticated key exchange. + * + * Call this function in addition to psa_pake_set_user() for PAKE algorithms + * that associate a user identifier with each side of the session. For PAKE + * algorithms that associate a single user identifier with the session, call + * psa_pake_set_user() only. + * + * Refer to the documentation of individual PAKE algorithm types (`PSA_ALG_XXX` + * values of type ::psa_algorithm_t such that #PSA_ALG_IS_PAKE(\c alg) is true) + * for more information. + * + * \param[in,out] operation The operation object to set the peer ID for. It + * must have been set up by psa_pake_setup() and + * not yet in use (neither psa_pake_output() nor + * psa_pake_input() has been called yet). It must + * be on operation for which the peer ID hasn't + * been set (psa_pake_set_peer() hasn't been + * called yet). + * \param[in] peer_id The peer's ID to authenticate. + * \param peer_id_len Size of the \p peer_id buffer in bytes. + * + * \retval #PSA_SUCCESS + * Success. + * \retval #PSA_ERROR_INVALID_ARGUMENT + * \p peer_id is not valid for the \p operation's algorithm and cipher + * suite. + * \retval #PSA_ERROR_NOT_SUPPORTED + * The algorithm doesn't associate a second identity with the session. + * \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription + * \retval #PSA_ERROR_COMMUNICATION_FAILURE \emptydescription + * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription + * \retval #PSA_ERROR_BAD_STATE + * Calling psa_pake_set_peer() is invalid with the \p operation's + * algorithm, the operation state is not valid, or the library has not + * been previously initialized by psa_crypto_init(). + * It is implementation-dependent whether a failure to initialize + * results in this error code. + */ +psa_status_t psa_pake_set_peer(psa_pake_operation_t *operation, + const uint8_t *peer_id, + size_t peer_id_len); + +/** Set the context data for a password-authenticated key exchange. + * + * Call this function for PAKE algorithms that accept additional context data + * as part of the protocol setup. + * + * Refer to the documentation of individual PAKE algorithm types (`PSA_ALG_XXX` + * values of type ::psa_algorithm_t such that #PSA_ALG_IS_PAKE(\c alg) is true) + * for more information. + * + * \param[in,out] operation The operation object to set the context for. It + * must have been set up by psa_pake_setup() and + * not yet in use (neither psa_pake_output() nor + * psa_pake_input() has been called yet). It must + * be on operation for which the context hasn't + * been set (psa_pake_set_context() hasn't been + * called yet). + * \param[in] context The context. + * \param context_len Size of the \p context buffer in bytes. + * + * \retval #PSA_SUCCESS + * Success. + * \retval #PSA_ERROR_INVALID_ARGUMENT + * The \p context is not valid for the operation’s algorithm and cipher suite. + * \retval #PSA_ERROR_NOT_SUPPORTED + * The \p context is not supported by the implementation. + * \retval #PSA_ERROR_COMMUNICATION_FAILURE \emptydescription + * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription + * \retval #PSA_ERROR_BAD_STATE + * Calling psa_pake_set_context() is invalid with the \p operation's + * algorithm, the operation state is not valid, or the library has not + * been previously initialized by psa_crypto_init(). + * It is implementation-dependent whether a failure to initialize + * results in this error code. + */ +psa_status_t psa_pake_set_context(psa_pake_operation_t *operation, + const uint8_t *context, + size_t context_len); + +/** Get output for a step of a password-authenticated key exchange. + * + * Depending on the algorithm being executed, you might need to call this + * function several times or you might not need to call this at all. + * + * The exact sequence of calls to perform a password-authenticated key + * exchange depends on the algorithm in use. Refer to the documentation of + * individual PAKE algorithm types (`PSA_ALG_XXX` values of type + * ::psa_algorithm_t such that #PSA_ALG_IS_PAKE(\c alg) is true) for more + * information. + * + * If this function returns an error status, the operation enters an error + * state and must be aborted by calling psa_pake_abort(). + * + * \param[in,out] operation Active PAKE operation. + * \param step The step of the algorithm for which the output + * is requested. + * \param[out] output Buffer where the output is to be written in the + * format appropriate for this \p step. Refer to + * the documentation of the individual + * \c PSA_PAKE_STEP_XXX constants for more + * information. + * \param output_size Size of the \p output buffer in bytes. This must + * be at least #PSA_PAKE_OUTPUT_SIZE(\c alg, \c + * primitive, \p output_step) where \c alg and + * \p primitive are the PAKE algorithm and primitive + * in the operation's cipher suite, and \p step is + * the output step. + * + * \param[out] output_length On success, the number of bytes of the returned + * output. + * + * \retval #PSA_SUCCESS + * Success. + * \retval #PSA_ERROR_BUFFER_TOO_SMALL + * The size of the \p output buffer is too small. + * \retval #PSA_ERROR_INVALID_ARGUMENT + * \p step is not compatible with the operation's algorithm. + * \retval #PSA_ERROR_NOT_SUPPORTED + * \p step is not supported with the operation's algorithm. + * \retval #PSA_ERROR_INSUFFICIENT_ENTROPY \emptydescription + * \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription + * \retval #PSA_ERROR_COMMUNICATION_FAILURE \emptydescription + * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription + * \retval #PSA_ERROR_STORAGE_FAILURE \emptydescription + * \retval #PSA_ERROR_DATA_CORRUPT \emptydescription + * \retval #PSA_ERROR_DATA_INVALID \emptydescription + * \retval #PSA_ERROR_BAD_STATE + * The operation state is not valid (it must be active, and fully set + * up, and this call must conform to the algorithm's requirements + * for ordering of input and output steps), or the library has not + * been previously initialized by psa_crypto_init(). + * It is implementation-dependent whether a failure to initialize + * results in this error code. + */ +psa_status_t psa_pake_output(psa_pake_operation_t *operation, + psa_pake_step_t step, + uint8_t *output, + size_t output_size, + size_t *output_length); + +/** Provide input for a step of a password-authenticated key exchange. + * + * Depending on the algorithm being executed, you might need to call this + * function several times or you might not need to call this at all. + * + * The exact sequence of calls to perform a password-authenticated key + * exchange depends on the algorithm in use. Refer to the documentation of + * individual PAKE algorithm types (`PSA_ALG_XXX` values of type + * ::psa_algorithm_t such that #PSA_ALG_IS_PAKE(\c alg) is true) for more + * information. + * + * If this function returns an error status, the operation enters an error + * state and must be aborted by calling psa_pake_abort(). + * + * \param[in,out] operation Active PAKE operation. + * \param step The step for which the input is provided. + * \param[in] input Buffer containing the input in the format + * appropriate for this \p step. Refer to the + * documentation of the individual + * \c PSA_PAKE_STEP_XXX constants for more + * information. + * \param input_length Size of the \p input buffer in bytes. + * + * \retval #PSA_SUCCESS + * Success. + * \retval #PSA_ERROR_INVALID_SIGNATURE + * The verification fails for a #PSA_PAKE_STEP_ZK_PROOF input step. + * \retval #PSA_ERROR_INVALID_ARGUMENT + * \p step is not compatible with the operation's algorithm, or + * \p input_length is not compatible with the \p operation’s algorithm, + * or the \p input is not valid for the \p operation's algorithm, + * cipher suite or \p step. + * \retval #PSA_ERROR_NOT_SUPPORTED + * \p step is not supported with the operation's algorithm, or + * \p step p is not supported with the \p operation's algorithm, or the + * \p input is not supported for the \p operation's algorithm, cipher + * suite or \p step. + * \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription + * \retval #PSA_ERROR_COMMUNICATION_FAILURE \emptydescription + * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription + * \retval #PSA_ERROR_STORAGE_FAILURE \emptydescription + * \retval #PSA_ERROR_DATA_CORRUPT \emptydescription + * \retval #PSA_ERROR_DATA_INVALID \emptydescription + * \retval #PSA_ERROR_BAD_STATE + * The operation state is not valid (it must be active, and fully set + * up, and this call must conform to the algorithm's requirements + * for ordering of input and output steps), or the library has not + * been previously initialized by psa_crypto_init(). + * It is implementation-dependent whether a failure to initialize + * results in this error code. + */ +psa_status_t psa_pake_input(psa_pake_operation_t *operation, + psa_pake_step_t step, + const uint8_t *input, + size_t input_length); + +/** Get shared secret from a PAKE. + * + * This is the final call in a PAKE operation, which retrieves the shared + * secret as a key. It is recommended that this key is used as an input to a + * key derivation operation to produce additional cryptographic keys. For + * some PAKE algorithms, the shared secret is also suitable for use as a key + * in cryptographic operations such as encryption. Refer to the documentation + * of individual PAKE algorithm types (`PSA_ALG_XXX` values of type + * ::psa_algorithm_t such that #PSA_ALG_IS_PAKE(\c alg) is true) for more + * information. + * + * Depending on the key confirmation requested in the cipher suite, + * psa_pake_get_shared_key() must be called either before or after the + * key-confirmation output and input steps for the PAKE algorithm. The key + * confirmation affects the guarantees that can be made about the shared key: + * + * Unconfirmed key + * If the cipher suite used to set up the operation requested an unconfirmed + * key, the application must call psa_pake_get_shared_key() after the + * key-exchange output and input steps are completed. The PAKE algorithm + * provides a cryptographic guarantee that only a peer who used the same + * password, and identity inputs, is able to compute the same key. However, + * there is no guarantee that the peer is the participant it claims to be, + * and was able to compute the same key. + * Since the peer is not authenticated, no action should be taken that assumes + * that the peer is who it claims to be. For example, do not access restricted + * files on the peer’s behalf until an explicit authentication has succeeded. + * Note: + * Some PAKE algorithms do not enable the output of the shared secret until it + * has been confirmed. + * + * Confirmed key + * If the cipher suite used to set up the operation requested a confirmed key, + * the application must call psa_pake_get_shared_key() after the key-exchange + * and key-confirmation output and input steps are completed. + * Following key confirmation, the PAKE algorithm provides a cryptographic + * guarantee that the peer used the same password and identity inputs, and has + * computed the identical shared secret key. + * Since the peer is not authenticated, no action should be taken that assumes + * that the peer is who it claims to be. For example, do not access restricted + * files on the peer’s behalf until an explicit authentication has succeeded. + * Note: + * Some PAKE algorithms do not include any key-confirmation steps. + * + * The exact sequence of calls to perform a password-authenticated key + * exchange depends on the algorithm in use. + * + * When this function returns successfully, \p operation becomes inactive. + * If this function returns an error status, both \p operation + * and \c key_derivation operations enter an error state and must be aborted + * by calling psa_pake_abort(). + * + * \param[in,out] operation Active PAKE operation. + * \param[in] attributes The attributes for the new key. + * \param[out] key On success, an identifier for the newly created + * key. #PSA_KEY_ID_NULL on failure. + * + * \retval #PSA_SUCCESS + * Success. + * \retval #PSA_ERROR_NOT_PERMITTED + * The implementation does not permit creating a key with the + * specified attributes due to some implementation-specific policy. + * \retval #PSA_ERROR_ALREADY_EXISTS + * This is an attempt to create a persistent key, and there is + * already a persistent key with the given identifier. + * \retval #PSA_ERROR_INVALID_ARGUMENT + * The key type is not valid for output from this operation’s + * algorithm, or the key size is nonzero, or the key lifetime is + * invalid, the key identifier is not valid for the key lifetime, + * or the key usage flags include invalid values, or the key’s + * permitted-usage algorithm is invalid, or the key attributes, + * as a whole, are invalid. + * \retval #PSA_ERROR_NOT_SUPPORTED + * The key attributes, as a whole, are not supported for creation + * from a PAKE secret, either by the implementation in general or + * in the specified storage location. + * \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription + * \retval #PSA_ERROR_COMMUNICATION_FAILURE \emptydescription + * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription + * \retval #PSA_ERROR_STORAGE_FAILURE \emptydescription + * \retval #PSA_ERROR_DATA_CORRUPT \emptydescription + * \retval #PSA_ERROR_DATA_INVALID \emptydescription + * \retval #PSA_ERROR_BAD_STATE + * The PAKE operation state is not valid (it must be ready to return + * the shared secret), or the library has not been previously + * initialized by psa_crypto_init(). + * It is implementation-dependent whether a failure to initialize + * results in this error code. + */ +psa_status_t psa_pake_get_shared_key(psa_pake_operation_t *operation, + const psa_key_attributes_t *attributes, + mbedtls_svc_key_id_t *key); + +/** Abort a PAKE operation. + * + * Aborting an operation frees all associated resources except for the \c + * operation structure itself. Once aborted, the operation object can be reused + * for another operation by calling psa_pake_setup() again. + * + * This function may be called at any time after the operation + * object has been initialized as described in #psa_pake_operation_t. + * + * In particular, calling psa_pake_abort() after the operation has been + * terminated by a call to psa_pake_abort() or psa_pake_get_shared_key() + * is safe and has no effect. + * + * \param[in,out] operation The operation to abort. + * + * \retval #PSA_SUCCESS + * Success. + * \retval #PSA_ERROR_COMMUNICATION_FAILURE \emptydescription + * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription + * \retval #PSA_ERROR_BAD_STATE + * The library has not been previously initialized by psa_crypto_init(). + * It is implementation-dependent whether a failure to initialize + * results in this error code. + */ +psa_status_t psa_pake_abort(psa_pake_operation_t *operation); + +/**@}*/ + +/** A sufficient output buffer size for psa_pake_output(). + * + * If the size of the output buffer is at least this large, it is guaranteed + * that psa_pake_output() will not fail due to an insufficient output buffer + * size. The actual size of the output might be smaller in any given call. + * + * See also #PSA_PAKE_OUTPUT_MAX_SIZE + * + * \param alg A PAKE algorithm (\c PSA_ALG_XXX value such that + * #PSA_ALG_IS_PAKE(\p alg) is true). + * \param primitive A primitive of type ::psa_pake_primitive_t that is + * compatible with algorithm \p alg. + * \param output_step A value of type ::psa_pake_step_t that is valid for the + * algorithm \p alg. + * \return A sufficient output buffer size for the specified + * PAKE algorithm, primitive, and output step. If the + * PAKE algorithm, primitive, or output step is not + * recognized, or the parameters are incompatible, + * return 0. + */ +#define PSA_PAKE_OUTPUT_SIZE(alg, primitive, output_step) \ + (output_step == PSA_PAKE_STEP_KEY_SHARE ? \ + PSA_PAKE_PRIMITIVE_GET_TYPE(primitive) == PSA_PAKE_PRIMITIVE_TYPE_DH ? \ + PSA_BITS_TO_BYTES(PSA_PAKE_PRIMITIVE_GET_BITS(primitive)) : \ + PSA_KEY_EXPORT_ECC_PUBLIC_KEY_MAX_SIZE(PSA_PAKE_PRIMITIVE_GET_BITS(primitive)) : \ + output_step == PSA_PAKE_STEP_ZK_PUBLIC ? \ + PSA_KEY_EXPORT_ECC_PUBLIC_KEY_MAX_SIZE(PSA_PAKE_PRIMITIVE_GET_BITS(primitive)) : \ + output_step == PSA_PAKE_STEP_ZK_PROOF ? \ + PSA_BITS_TO_BYTES(PSA_PAKE_PRIMITIVE_GET_BITS(primitive)) : \ + output_step == PSA_PAKE_STEP_CONFIRM ? \ + PSA_ALG_IS_SPAKE2P_CMAC(alg) ? \ + PSA_MAC_LENGTH(PSA_KEY_TYPE_AES, 128, PSA_ALG_CMAC) : \ + PSA_HASH_LENGTH(alg) : \ + 0u) + +/** A sufficient input buffer size for psa_pake_input(). + * + * The value returned by this macro is guaranteed to be large enough for any + * valid input to psa_pake_input() in an operation with the specified + * parameters. + * + * See also #PSA_PAKE_INPUT_MAX_SIZE + * + * \param alg A PAKE algorithm (\c PSA_ALG_XXX value such that + * #PSA_ALG_IS_PAKE(\p alg) is true). + * \param primitive A primitive of type ::psa_pake_primitive_t that is + * compatible with algorithm \p alg. + * \param input_step A value of type ::psa_pake_step_t that is valid for the + * algorithm \p alg. + * \return A sufficient input buffer size for the specified + * input, cipher suite and algorithm. If the cipher suite, + * the input type or PAKE algorithm is not recognized, or + * the parameters are incompatible, return 0. + */ +#define PSA_PAKE_INPUT_SIZE(alg, primitive, input_step) \ + (input_step == PSA_PAKE_STEP_KEY_SHARE ? \ + PSA_PAKE_PRIMITIVE_GET_TYPE(primitive) == PSA_PAKE_PRIMITIVE_TYPE_DH ? \ + PSA_BITS_TO_BYTES(PSA_PAKE_PRIMITIVE_GET_BITS(primitive)) : \ + PSA_KEY_EXPORT_ECC_PUBLIC_KEY_MAX_SIZE(PSA_PAKE_PRIMITIVE_GET_BITS(primitive)) : \ + input_step == PSA_PAKE_STEP_ZK_PUBLIC ? \ + PSA_KEY_EXPORT_ECC_PUBLIC_KEY_MAX_SIZE(PSA_PAKE_PRIMITIVE_GET_BITS(primitive)) : \ + input_step == PSA_PAKE_STEP_ZK_PROOF ? \ + PSA_BITS_TO_BYTES(PSA_PAKE_PRIMITIVE_GET_BITS(primitive)) : \ + input_step == PSA_PAKE_STEP_CONFIRM ? \ + PSA_ALG_IS_SPAKE2P_CMAC(alg) ? \ + PSA_MAC_LENGTH(PSA_KEY_TYPE_AES, 128, PSA_ALG_CMAC) : \ + PSA_HASH_LENGTH(alg) : \ + input_step == PSA_PAKE_STEP_SALT ? \ + 64u : \ + 0u) + +/** Output buffer size for psa_pake_output() for any of the supported PAKE + * algorithm and primitive suites and output step. + * + * This macro must expand to a compile-time constant integer. + * + * The value of this macro must be at least as large as the largest value + * returned by PSA_PAKE_OUTPUT_SIZE() + * + * See also #PSA_PAKE_OUTPUT_SIZE(\p alg, \p primitive, \p output_step). + */ +#ifdef PSA_WANT_ALG_SRP_6 +#define PSA_PAKE_OUTPUT_MAX_SIZE PSA_BITS_TO_BYTES(PSA_VENDOR_FFDH_MAX_KEY_BITS) +#else +#define PSA_PAKE_OUTPUT_MAX_SIZE PSA_KEY_EXPORT_ECC_PUBLIC_KEY_MAX_SIZE(PSA_VENDOR_ECC_MAX_CURVE_BITS) +#endif + +/** Input buffer size for psa_pake_input() for any of the supported PAKE + * algorithm and primitive suites and input step. + * + * This macro must expand to a compile-time constant integer. + * + * The value of this macro must be at least as large as the largest value + * returned by PSA_PAKE_INPUT_SIZE() + * + * See also #PSA_PAKE_INPUT_SIZE(\p alg, \p primitive, \p output_step). + */ +#ifdef PSA_WANT_ALG_SRP_6 +#define PSA_PAKE_INPUT_MAX_SIZE PSA_BITS_TO_BYTES(PSA_VENDOR_FFDH_MAX_KEY_BITS) +#else +#define PSA_PAKE_INPUT_MAX_SIZE PSA_KEY_EXPORT_ECC_PUBLIC_KEY_MAX_SIZE(PSA_VENDOR_ECC_MAX_CURVE_BITS) +#endif + +static inline psa_algorithm_t psa_pake_cs_get_algorithm( + const psa_pake_cipher_suite_t *cipher_suite) +{ + return cipher_suite->algorithm; +} + +static inline void psa_pake_cs_set_algorithm( + psa_pake_cipher_suite_t *cipher_suite, + psa_algorithm_t algorithm) +{ + if (!PSA_ALG_IS_PAKE(algorithm)) { + cipher_suite->algorithm = 0; + } else { + cipher_suite->algorithm = algorithm; + } +} + +static inline psa_pake_primitive_t psa_pake_cs_get_primitive( + const psa_pake_cipher_suite_t *cipher_suite) +{ + return cipher_suite->primitive; +} + +static inline void psa_pake_cs_set_primitive( + psa_pake_cipher_suite_t *cipher_suite, + psa_pake_primitive_t primitive) +{ + cipher_suite->primitive = primitive; +} + +static inline uint32_t psa_pake_cs_get_key_confirmation( + const psa_pake_cipher_suite_t* cipher_suite) +{ + return cipher_suite->key_confirmation; +} + +static inline void psa_pake_cs_set_key_confirmation( + psa_pake_cipher_suite_t* cipher_suite, + uint32_t key_confirmation) +{ + cipher_suite->key_confirmation = key_confirmation; +} + +/**@}*/ + +#ifdef __cplusplus +} +#endif + +#endif /* PSA_CRYPTO_EXTRA_H */ diff --git a/nrfdemo/build/tfm/api_ns/interface/include/psa/crypto_platform.h b/nrfdemo/build/tfm/api_ns/interface/include/psa/crypto_platform.h new file mode 100644 index 0000000..c462898 --- /dev/null +++ b/nrfdemo/build/tfm/api_ns/interface/include/psa/crypto_platform.h @@ -0,0 +1,56 @@ + +/* + * Copyright (c) 2023, Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: BSD-3-Clause + * + */ +/** + * \file psa/crypto_platform.h + * + * \brief PSA cryptography module: TF-M platform definitions + * + * \note This file may not be included directly. Applications must + * include psa/crypto.h. + * + * This file contains platform-dependent type definitions. + * + * In implementations with isolation between the application and the + * cryptography module, implementers should take care to ensure that + * the definitions that are exposed to applications match what the + * module implements. + */ + +#ifndef PSA_CRYPTO_PLATFORM_H +#define PSA_CRYPTO_PLATFORM_H + +/* PSA requires several types which C99 provides in stdint.h. */ +#include <stdint.h> + +/* No particular platform definition is currently required for the + * TF-M client view of the PSA Crytpo APIs, but we keep this header + * available for reference and future compatibility + */ + +#if defined(__NRF_TFM__) && defined(MBEDTLS_PSA_CRYPTO_KEY_ID_ENCODES_OWNER) +/* + * This header file is provided by TF-M and is only intended to be + * used by clients of PSA, not implementations of PSA. So secure + * partitions in the TF-M image (other than the crypto partition + * itself), and non-secure images. + * + * In NCS, the TF-M crypto partition should be using PSA header files + * from Oberon as it is Oberon that implements PSA. + * + * We want to detect that a source file is in the crypto partition, + * but has accidentally used this TF-M header instead of headers + * provided by Oberon. To do this we would ideally have a + * IS_IN_CRYPTO_PARTION define, but since there is no such define at + * time of writing we check MBEDTLS_PSA_CRYPTO_KEY_ID_ENCODES_OWNER + * instead, which should only be defined by the PSA implementation, + * not by PSA clients. + */ +#error "The TF-M image included the TF-M PSA headers but should have included Oberon PSA headers" +#endif + +#endif /* PSA_CRYPTO_PLATFORM_H */ diff --git a/nrfdemo/build/tfm/api_ns/interface/include/psa/crypto_sizes.h b/nrfdemo/build/tfm/api_ns/interface/include/psa/crypto_sizes.h new file mode 100644 index 0000000..94da583 --- /dev/null +++ b/nrfdemo/build/tfm/api_ns/interface/include/psa/crypto_sizes.h @@ -0,0 +1,1351 @@ +/* + * Copyright (c) 2018-2023, Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: BSD-3-Clause + * + */ +/** + * \file psa/crypto_sizes.h + * + * \brief PSA cryptography module: Mbed TLS buffer size macros + * + * \note This file may not be included directly. Applications must + * include psa/crypto.h. + * + * This file contains the definitions of macros that are useful to + * compute buffer sizes. The signatures and semantics of these macros + * are standardized, but the definitions are not, because they depend on + * the available algorithms and, in some cases, on permitted tolerances + * on buffer sizes. + * + * In implementations with isolation between the application and the + * cryptography module, implementers should take care to ensure that + * the definitions that are exposed to applications match what the + * module implements. + * + * Macros that compute sizes whose values do not depend on the + * implementation are in crypto.h. + */ + +#ifndef PSA_CRYPTO_SIZES_H +#define PSA_CRYPTO_SIZES_H + +#define PSA_BITS_TO_BYTES(bits) (((bits) + 7u) / 8u) +#define PSA_BYTES_TO_BITS(bytes) ((bytes) * 8u) +#define PSA_MAX_OF_THREE(a, b, c) ((a) <= (b) ? (b) <= (c) ? \ + (c) : (b) : (a) <= (c) ? (c) : (a)) + +#define PSA_ROUND_UP_TO_MULTIPLE(block_size, length) \ + (((length) + (block_size) - 1) / (block_size) * (block_size)) + +/** The size of the output of psa_hash_finish(), in bytes. + * + * This is also the hash size that psa_hash_verify() expects. + * + * \param alg A hash algorithm (\c PSA_ALG_XXX value such that + * #PSA_ALG_IS_HASH(\p alg) is true), or an HMAC algorithm + * (#PSA_ALG_HMAC(\c hash_alg) where \c hash_alg is a + * hash algorithm). + * + * \return The hash size for the specified hash algorithm. + * If the hash algorithm is not recognized, return 0. + */ +#define PSA_HASH_LENGTH(alg) \ + ( \ + PSA_ALG_HMAC_GET_HASH(alg) == PSA_ALG_MD5 ? 16u : \ + PSA_ALG_HMAC_GET_HASH(alg) == PSA_ALG_RIPEMD160 ? 20u : \ + PSA_ALG_HMAC_GET_HASH(alg) == PSA_ALG_SHA_1 ? 20u : \ + PSA_ALG_HMAC_GET_HASH(alg) == PSA_ALG_SHA_224 ? 28u : \ + PSA_ALG_HMAC_GET_HASH(alg) == PSA_ALG_SHA_256 ? 32u : \ + PSA_ALG_HMAC_GET_HASH(alg) == PSA_ALG_SHA_384 ? 48u : \ + PSA_ALG_HMAC_GET_HASH(alg) == PSA_ALG_SHA_512 ? 64u : \ + PSA_ALG_HMAC_GET_HASH(alg) == PSA_ALG_SHA_512_224 ? 28u : \ + PSA_ALG_HMAC_GET_HASH(alg) == PSA_ALG_SHA_512_256 ? 32u : \ + PSA_ALG_HMAC_GET_HASH(alg) == PSA_ALG_SHA3_224 ? 28u : \ + PSA_ALG_HMAC_GET_HASH(alg) == PSA_ALG_SHA3_256 ? 32u : \ + PSA_ALG_HMAC_GET_HASH(alg) == PSA_ALG_SHA3_384 ? 48u : \ + PSA_ALG_HMAC_GET_HASH(alg) == PSA_ALG_SHA3_512 ? 64u : \ + 0u) + +/** The input block size of a hash algorithm, in bytes. + * + * Hash algorithms process their input data in blocks. Hash operations will + * retain any partial blocks until they have enough input to fill the block or + * until the operation is finished. + * This affects the output from psa_hash_suspend(). + * + * \param alg A hash algorithm (\c PSA_ALG_XXX value such that + * PSA_ALG_IS_HASH(\p alg) is true). + * + * \return The block size in bytes for the specified hash algorithm. + * If the hash algorithm is not recognized, return 0. + * An implementation can return either 0 or the correct size for a + * hash algorithm that it recognizes, but does not support. + */ +#define PSA_HASH_BLOCK_LENGTH(alg) \ + ( \ + PSA_ALG_HMAC_GET_HASH(alg) == PSA_ALG_MD5 ? 64u : \ + PSA_ALG_HMAC_GET_HASH(alg) == PSA_ALG_RIPEMD160 ? 64u : \ + PSA_ALG_HMAC_GET_HASH(alg) == PSA_ALG_SHA_1 ? 64u : \ + PSA_ALG_HMAC_GET_HASH(alg) == PSA_ALG_SHA_224 ? 64u : \ + PSA_ALG_HMAC_GET_HASH(alg) == PSA_ALG_SHA_256 ? 64u : \ + PSA_ALG_HMAC_GET_HASH(alg) == PSA_ALG_SHA_384 ? 128u : \ + PSA_ALG_HMAC_GET_HASH(alg) == PSA_ALG_SHA_512 ? 128u : \ + PSA_ALG_HMAC_GET_HASH(alg) == PSA_ALG_SHA_512_224 ? 128u : \ + PSA_ALG_HMAC_GET_HASH(alg) == PSA_ALG_SHA_512_256 ? 128u : \ + PSA_ALG_HMAC_GET_HASH(alg) == PSA_ALG_SHA3_224 ? 144u : \ + PSA_ALG_HMAC_GET_HASH(alg) == PSA_ALG_SHA3_256 ? 136u : \ + PSA_ALG_HMAC_GET_HASH(alg) == PSA_ALG_SHA3_384 ? 104u : \ + PSA_ALG_HMAC_GET_HASH(alg) == PSA_ALG_SHA3_512 ? 72u : \ + 0u) + +/** \def PSA_HASH_MAX_SIZE + * + * Maximum size of a hash. + * + * This macro expands to a compile-time constant integer. This value + * is the maximum size of a hash in bytes. + */ +/* Note: for HMAC-SHA-3, the block size is 144 bytes for HMAC-SHA3-224, + * 136 bytes for HMAC-SHA3-256, 104 bytes for SHA3-384, 72 bytes for + * HMAC-SHA3-512. */ +/* Note: PSA_HASH_MAX_SIZE should be kept in sync with MBEDTLS_MD_MAX_SIZE, + * see the note on MBEDTLS_MD_MAX_SIZE for details. + */ +#if defined(MBEDTLS_PSA_CRYPTO_CONFIG) +#if defined(PSA_WANT_ALG_SHA3_224) +#define PSA_HMAC_MAX_HASH_BLOCK_SIZE 144u +#elif defined(PSA_WANT_ALG_SHA3_256) +#define PSA_HMAC_MAX_HASH_BLOCK_SIZE 136u +#elif defined(PSA_WANT_ALG_SHA_512) +#define PSA_HMAC_MAX_HASH_BLOCK_SIZE 128u +#elif defined(PSA_WANT_ALG_SHA_384) +#define PSA_HMAC_MAX_HASH_BLOCK_SIZE 128u +#elif defined(PSA_WANT_ALG_SHA3_384) +#define PSA_HMAC_MAX_HASH_BLOCK_SIZE 104u +#elif defined(PSA_WANT_ALG_SHA3_512) +#define PSA_HMAC_MAX_HASH_BLOCK_SIZE 72u +#elif defined(PSA_WANT_ALG_SHA_256) +#define PSA_HMAC_MAX_HASH_BLOCK_SIZE 64u +#elif defined(PSA_WANT_ALG_SHA_224) +#define PSA_HMAC_MAX_HASH_BLOCK_SIZE 64u +#else /* SHA-1 or smaller */ +#define PSA_HMAC_MAX_HASH_BLOCK_SIZE 64u +#endif + +#if defined(PSA_WANT_ALG_SHA_512) || defined(PSA_WANT_ALG_SHA3_512) +#define PSA_HASH_MAX_SIZE 64u +#elif defined(PSA_WANT_ALG_SHA_384) || defined(PSA_WANT_ALG_SHA3_384) +#define PSA_HASH_MAX_SIZE 48u +#elif defined(PSA_WANT_ALG_SHA_256) || defined(PSA_WANT_ALG_SHA3_256) +#define PSA_HASH_MAX_SIZE 32u +#elif defined(PSA_WANT_ALG_SHA_224) || defined(PSA_WANT_ALG_SHA3_224) +#define PSA_HASH_MAX_SIZE 28u +#else /* SHA-1 or smaller */ +#define PSA_HASH_MAX_SIZE 20u +#endif +#else /* defined(MBEDTLS_PSA_CRYPTO_CONFIG) */ +/* Without any PSA configuration we must assume the maximum size possible. */ +#define PSA_HASH_MAX_SIZE 64u +#define PSA_HMAC_MAX_HASH_BLOCK_SIZE 144u +#endif /* defined(MBEDTLS_PSA_CRYPTO_CONFIG) */ + +/** \def PSA_MAC_MAX_SIZE + * + * Maximum size of a MAC. + * + * This macro expands to a compile-time constant integer. This value + * is the maximum size of a MAC in bytes. + */ +/* All non-HMAC MACs have a maximum size that's smaller than the + * minimum possible value of PSA_HASH_MAX_SIZE in this implementation. */ +/* Note that the encoding of truncated MAC algorithms limits this value + * to 64 bytes. + */ +#define PSA_MAC_MAX_SIZE PSA_HASH_MAX_SIZE + +/** The length of a tag for an AEAD algorithm, in bytes. + * + * This macro can be used to allocate a buffer of sufficient size to store the + * tag output from psa_aead_finish(). + * + * See also #PSA_AEAD_TAG_MAX_SIZE. + * + * \param key_type The type of the AEAD key. + * \param key_bits The size of the AEAD key in bits. + * \param alg An AEAD algorithm + * (\c PSA_ALG_XXX value such that + * #PSA_ALG_IS_AEAD(\p alg) is true). + * + * \return The tag length for the specified algorithm and key. + * If the AEAD algorithm does not have an identified + * tag that can be distinguished from the rest of + * the ciphertext, return 0. + * If the key type or AEAD algorithm is not + * recognized, or the parameters are incompatible, + * return 0. + */ +#define PSA_AEAD_TAG_LENGTH(key_type, key_bits, alg) \ + (PSA_AEAD_NONCE_LENGTH(key_type, alg) != 0 ? \ + PSA_ALG_AEAD_GET_TAG_LENGTH(alg) : \ + ((void) (key_bits), 0u)) + +/** The maximum tag size for all supported AEAD algorithms, in bytes. + * + * See also #PSA_AEAD_TAG_LENGTH(\p key_type, \p key_bits, \p alg). + */ +#define PSA_AEAD_TAG_MAX_SIZE 16u + +/* The maximum size of an RSA key on this implementation, in bits. + * This is a vendor-specific macro. + * + * Mbed TLS does not set a hard limit on the size of RSA keys: any key + * whose parameters fit in a bignum is accepted. However large keys can + * induce a large memory usage and long computation times. Unlike other + * auxiliary macros in this file and in crypto.h, which reflect how the + * library is configured, this macro defines how the library is + * configured. This implementation refuses to import or generate an + * RSA key whose size is larger than the value defined here. + * + * Note that an implementation may set different size limits for different + * operations, and does not need to accept all key sizes up to the limit. */ +#define PSA_VENDOR_RSA_MAX_KEY_BITS 4096u + +/* The minimum size of an RSA key on this implementation, in bits. + * This is a vendor-specific macro. + * + * Limits RSA key generation to a minimum due to avoid accidental misuse. + * This value cannot be less than 128 bits. + */ +#if defined(MBEDTLS_RSA_GEN_KEY_MIN_BITS) +#define PSA_VENDOR_RSA_GENERATE_MIN_KEY_BITS MBEDTLS_RSA_GEN_KEY_MIN_BITS +#else +#define PSA_VENDOR_RSA_GENERATE_MIN_KEY_BITS 1024 +#endif + +/* The maximum size of an DH key on this implementation, in bits. + * + * Note that an implementation may set different size limits for different + * operations, and does not need to accept all key sizes up to the limit. + */ +#define PSA_VENDOR_FFDH_MAX_KEY_BITS 8192u + +/* The maximum size of an ECC key on this implementation, in bits. + * This is a vendor-specific macro. */ +#if defined(MBEDTLS_PSA_CRYPTO_CONFIG) +#if defined(PSA_WANT_ECC_SECP_R1_521) +#define PSA_VENDOR_ECC_MAX_CURVE_BITS 521u +#elif defined(PSA_WANT_ECC_BRAINPOOL_P_R1_512) +#define PSA_VENDOR_ECC_MAX_CURVE_BITS 512u +#elif defined(PSA_WANT_ECC_MONTGOMERY_448) +#define PSA_VENDOR_ECC_MAX_CURVE_BITS 448u +#elif defined(PSA_WANT_ECC_SECP_R1_384) +#define PSA_VENDOR_ECC_MAX_CURVE_BITS 384u +#elif defined(PSA_WANT_ECC_BRAINPOOL_P_R1_384) +#define PSA_VENDOR_ECC_MAX_CURVE_BITS 384u +#elif defined(PSA_WANT_ECC_SECP_R1_256) +#define PSA_VENDOR_ECC_MAX_CURVE_BITS 256u +#elif defined(PSA_WANT_ECC_SECP_K1_256) +#define PSA_VENDOR_ECC_MAX_CURVE_BITS 256u +#elif defined(PSA_WANT_ECC_BRAINPOOL_P_R1_256) +#define PSA_VENDOR_ECC_MAX_CURVE_BITS 256u +#elif defined(PSA_WANT_ECC_MONTGOMERY_255) +#define PSA_VENDOR_ECC_MAX_CURVE_BITS 255u +#elif defined(PSA_WANT_ECC_SECP_R1_224) +#define PSA_VENDOR_ECC_MAX_CURVE_BITS 224u +#elif defined(PSA_WANT_ECC_SECP_K1_224) +#define PSA_VENDOR_ECC_MAX_CURVE_BITS 224u +#elif defined(PSA_WANT_ECC_SECP_R1_192) +#define PSA_VENDOR_ECC_MAX_CURVE_BITS 192u +#elif defined(PSA_WANT_ECC_SECP_K1_192) +#define PSA_VENDOR_ECC_MAX_CURVE_BITS 192u +#else +#define PSA_VENDOR_ECC_MAX_CURVE_BITS 0u +#endif +#else /* defined(MBEDTLS_PSA_CRYPTO_CONFIG) */ +/* Without any PSA configuration we must assume the maximum size possible. */ +#define PSA_VENDOR_ECC_MAX_CURVE_BITS 521 +#endif /* defined(MBEDTLS_PSA_CRYPTO_CONFIG) */ + +/** This macro returns the maximum supported length of the PSK for the + * TLS-1.2 PSK-to-MS key derivation + * (#PSA_ALG_TLS12_PSK_TO_MS(\c hash_alg)). + * + * The maximum supported length does not depend on the chosen hash algorithm. + * + * Quoting RFC 4279, Sect 5.3: + * TLS implementations supporting these ciphersuites MUST support + * arbitrary PSK identities up to 128 octets in length, and arbitrary + * PSKs up to 64 octets in length. Supporting longer identities and + * keys is RECOMMENDED. + * + * Therefore, no implementation should define a value smaller than 64 + * for #PSA_TLS12_PSK_TO_MS_PSK_MAX_SIZE. + */ +#define PSA_TLS12_PSK_TO_MS_PSK_MAX_SIZE 128u + +/* The expected size of input passed to psa_tls12_ecjpake_to_pms_input, + * which is expected to work with P-256 curve only. */ +#define PSA_TLS12_ECJPAKE_TO_PMS_INPUT_SIZE 65u + +/* The size of a serialized K.X coordinate to be used in + * psa_tls12_ecjpake_to_pms_input. This function only accepts the P-256 + * curve. */ +#define PSA_TLS12_ECJPAKE_TO_PMS_DATA_SIZE 32u + +/* The maximum number of iterations for PBKDF2 on this implementation, in bits. + * This is a vendor-specific macro. This can be configured if necessary. + */ +#define PSA_VENDOR_PBKDF2_MAX_ITERATIONS 0xffffffffU + +/** The maximum size of a block cipher. */ +#define PSA_BLOCK_CIPHER_BLOCK_MAX_SIZE 16u + +/** The size of the output of psa_mac_sign_finish(), in bytes. + * + * This is also the MAC size that psa_mac_verify_finish() expects. + * + * \warning This macro may evaluate its arguments multiple times or + * zero times, so you should not pass arguments that contain + * side effects. + * + * \param key_type The type of the MAC key. + * \param key_bits The size of the MAC key in bits. + * \param alg A MAC algorithm (\c PSA_ALG_XXX value such that + * #PSA_ALG_IS_MAC(\p alg) is true). + * + * \return The MAC size for the specified algorithm with + * the specified key parameters. + * \return 0 if the MAC algorithm is not recognized. + * \return Either 0 or the correct size for a MAC algorithm that + * the implementation recognizes, but does not support. + * \return Unspecified if the key parameters are not consistent + * with the algorithm. + */ +#define PSA_MAC_LENGTH(key_type, key_bits, alg) \ + ((alg) & PSA_ALG_MAC_TRUNCATION_MASK ? PSA_MAC_TRUNCATED_LENGTH(alg) : \ + PSA_ALG_IS_HMAC(alg) ? PSA_HASH_LENGTH(PSA_ALG_HMAC_GET_HASH(alg)) : \ + PSA_ALG_IS_BLOCK_CIPHER_MAC(alg) ? PSA_BLOCK_CIPHER_BLOCK_LENGTH(key_type) : \ + ((void) (key_type), (void) (key_bits), 0u)) + +/** The maximum size of the output of psa_aead_encrypt(), in bytes. + * + * If the size of the ciphertext buffer is at least this large, it is + * guaranteed that psa_aead_encrypt() will not fail due to an + * insufficient buffer size. Depending on the algorithm, the actual size of + * the ciphertext may be smaller. + * + * See also #PSA_AEAD_ENCRYPT_OUTPUT_MAX_SIZE(\p plaintext_length). + * + * \warning This macro may evaluate its arguments multiple times or + * zero times, so you should not pass arguments that contain + * side effects. + * + * \param key_type A symmetric key type that is + * compatible with algorithm \p alg. + * \param alg An AEAD algorithm + * (\c PSA_ALG_XXX value such that + * #PSA_ALG_IS_AEAD(\p alg) is true). + * \param plaintext_length Size of the plaintext in bytes. + * + * \return The AEAD ciphertext size for the specified + * algorithm. + * If the key type or AEAD algorithm is not + * recognized, or the parameters are incompatible, + * return 0. + */ +#define PSA_AEAD_ENCRYPT_OUTPUT_SIZE(key_type, alg, plaintext_length) \ + (PSA_AEAD_NONCE_LENGTH(key_type, alg) != 0 ? \ + (plaintext_length) + PSA_ALG_AEAD_GET_TAG_LENGTH(alg) : \ + 0u) + +/** A sufficient output buffer size for psa_aead_encrypt(), for any of the + * supported key types and AEAD algorithms. + * + * If the size of the ciphertext buffer is at least this large, it is guaranteed + * that psa_aead_encrypt() will not fail due to an insufficient buffer size. + * + * \note This macro returns a compile-time constant if its arguments are + * compile-time constants. + * + * See also #PSA_AEAD_ENCRYPT_OUTPUT_SIZE(\p key_type, \p alg, + * \p plaintext_length). + * + * \param plaintext_length Size of the plaintext in bytes. + * + * \return A sufficient output buffer size for any of the + * supported key types and AEAD algorithms. + * + */ +#define PSA_AEAD_ENCRYPT_OUTPUT_MAX_SIZE(plaintext_length) \ + ((plaintext_length) + PSA_AEAD_TAG_MAX_SIZE) + + +/** The maximum size of the output of psa_aead_decrypt(), in bytes. + * + * If the size of the plaintext buffer is at least this large, it is + * guaranteed that psa_aead_decrypt() will not fail due to an + * insufficient buffer size. Depending on the algorithm, the actual size of + * the plaintext may be smaller. + * + * See also #PSA_AEAD_DECRYPT_OUTPUT_MAX_SIZE(\p ciphertext_length). + * + * \warning This macro may evaluate its arguments multiple times or + * zero times, so you should not pass arguments that contain + * side effects. + * + * \param key_type A symmetric key type that is + * compatible with algorithm \p alg. + * \param alg An AEAD algorithm + * (\c PSA_ALG_XXX value such that + * #PSA_ALG_IS_AEAD(\p alg) is true). + * \param ciphertext_length Size of the plaintext in bytes. + * + * \return The AEAD ciphertext size for the specified + * algorithm. + * If the key type or AEAD algorithm is not + * recognized, or the parameters are incompatible, + * return 0. + */ +#define PSA_AEAD_DECRYPT_OUTPUT_SIZE(key_type, alg, ciphertext_length) \ + (PSA_AEAD_NONCE_LENGTH(key_type, alg) != 0 && \ + (ciphertext_length) > PSA_ALG_AEAD_GET_TAG_LENGTH(alg) ? \ + (ciphertext_length) - PSA_ALG_AEAD_GET_TAG_LENGTH(alg) : \ + 0u) + +/** A sufficient output buffer size for psa_aead_decrypt(), for any of the + * supported key types and AEAD algorithms. + * + * If the size of the plaintext buffer is at least this large, it is guaranteed + * that psa_aead_decrypt() will not fail due to an insufficient buffer size. + * + * \note This macro returns a compile-time constant if its arguments are + * compile-time constants. + * + * See also #PSA_AEAD_DECRYPT_OUTPUT_SIZE(\p key_type, \p alg, + * \p ciphertext_length). + * + * \param ciphertext_length Size of the ciphertext in bytes. + * + * \return A sufficient output buffer size for any of the + * supported key types and AEAD algorithms. + * + */ +#define PSA_AEAD_DECRYPT_OUTPUT_MAX_SIZE(ciphertext_length) \ + (ciphertext_length) + +/** The default nonce size for an AEAD algorithm, in bytes. + * + * This macro can be used to allocate a buffer of sufficient size to + * store the nonce output from #psa_aead_generate_nonce(). + * + * See also #PSA_AEAD_NONCE_MAX_SIZE. + * + * \note This is not the maximum size of nonce supported as input to + * #psa_aead_set_nonce(), #psa_aead_encrypt() or #psa_aead_decrypt(), + * just the default size that is generated by #psa_aead_generate_nonce(). + * + * \warning This macro may evaluate its arguments multiple times or + * zero times, so you should not pass arguments that contain + * side effects. + * + * \param key_type A symmetric key type that is compatible with + * algorithm \p alg. + * + * \param alg An AEAD algorithm (\c PSA_ALG_XXX value such that + * #PSA_ALG_IS_AEAD(\p alg) is true). + * + * \return The default nonce size for the specified key type and algorithm. + * If the key type or AEAD algorithm is not recognized, + * or the parameters are incompatible, return 0. + */ +#define PSA_AEAD_NONCE_LENGTH(key_type, alg) \ + (PSA_BLOCK_CIPHER_BLOCK_LENGTH(key_type) == 16 ? \ + MBEDTLS_PSA_ALG_AEAD_EQUAL(alg, PSA_ALG_CCM) ? 13u : \ + MBEDTLS_PSA_ALG_AEAD_EQUAL(alg, PSA_ALG_GCM) ? 12u : \ + 0u : \ + (key_type) == PSA_KEY_TYPE_CHACHA20 && \ + MBEDTLS_PSA_ALG_AEAD_EQUAL(alg, PSA_ALG_CHACHA20_POLY1305) ? 12u : \ + 0u) + +/** The maximum default nonce size among all supported pairs of key types and + * AEAD algorithms, in bytes. + * + * This is equal to or greater than any value that #PSA_AEAD_NONCE_LENGTH() + * may return. + * + * \note This is not the maximum size of nonce supported as input to + * #psa_aead_set_nonce(), #psa_aead_encrypt() or #psa_aead_decrypt(), + * just the largest size that may be generated by + * #psa_aead_generate_nonce(). + */ +#define PSA_AEAD_NONCE_MAX_SIZE 13u + +/** A sufficient output buffer size for psa_aead_update(). + * + * If the size of the output buffer is at least this large, it is + * guaranteed that psa_aead_update() will not fail due to an + * insufficient buffer size. The actual size of the output may be smaller + * in any given call. + * + * See also #PSA_AEAD_UPDATE_OUTPUT_MAX_SIZE(\p input_length). + * + * \warning This macro may evaluate its arguments multiple times or + * zero times, so you should not pass arguments that contain + * side effects. + * + * \param key_type A symmetric key type that is + * compatible with algorithm \p alg. + * \param alg An AEAD algorithm + * (\c PSA_ALG_XXX value such that + * #PSA_ALG_IS_AEAD(\p alg) is true). + * \param input_length Size of the input in bytes. + * + * \return A sufficient output buffer size for the specified + * algorithm. + * If the key type or AEAD algorithm is not + * recognized, or the parameters are incompatible, + * return 0. + */ +/* For all the AEAD modes defined in this specification, it is possible + * to emit output without delay. However, hardware may not always be + * capable of this. So for modes based on a block cipher, allow the + * implementation to delay the output until it has a full block. */ +#define PSA_AEAD_UPDATE_OUTPUT_SIZE(key_type, alg, input_length) \ + (PSA_AEAD_NONCE_LENGTH(key_type, alg) != 0 ? \ + PSA_ALG_IS_AEAD_ON_BLOCK_CIPHER(alg) ? \ + PSA_ROUND_UP_TO_MULTIPLE(PSA_BLOCK_CIPHER_BLOCK_LENGTH(key_type), (input_length)) : \ + (input_length) : \ + 0u) + +/** A sufficient output buffer size for psa_aead_update(), for any of the + * supported key types and AEAD algorithms. + * + * If the size of the output buffer is at least this large, it is guaranteed + * that psa_aead_update() will not fail due to an insufficient buffer size. + * + * See also #PSA_AEAD_UPDATE_OUTPUT_SIZE(\p key_type, \p alg, \p input_length). + * + * \param input_length Size of the input in bytes. + */ +#define PSA_AEAD_UPDATE_OUTPUT_MAX_SIZE(input_length) \ + (PSA_ROUND_UP_TO_MULTIPLE(PSA_BLOCK_CIPHER_BLOCK_MAX_SIZE, (input_length))) + +/** A sufficient ciphertext buffer size for psa_aead_finish(). + * + * If the size of the ciphertext buffer is at least this large, it is + * guaranteed that psa_aead_finish() will not fail due to an + * insufficient ciphertext buffer size. The actual size of the output may + * be smaller in any given call. + * + * See also #PSA_AEAD_FINISH_OUTPUT_MAX_SIZE. + * + * \param key_type A symmetric key type that is + compatible with algorithm \p alg. + * \param alg An AEAD algorithm + * (\c PSA_ALG_XXX value such that + * #PSA_ALG_IS_AEAD(\p alg) is true). + * + * \return A sufficient ciphertext buffer size for the + * specified algorithm. + * If the key type or AEAD algorithm is not + * recognized, or the parameters are incompatible, + * return 0. + */ +#define PSA_AEAD_FINISH_OUTPUT_SIZE(key_type, alg) \ + (PSA_AEAD_NONCE_LENGTH(key_type, alg) != 0 && \ + PSA_ALG_IS_AEAD_ON_BLOCK_CIPHER(alg) ? \ + PSA_BLOCK_CIPHER_BLOCK_LENGTH(key_type) : \ + 0u) + +/** A sufficient ciphertext buffer size for psa_aead_finish(), for any of the + * supported key types and AEAD algorithms. + * + * See also #PSA_AEAD_FINISH_OUTPUT_SIZE(\p key_type, \p alg). + */ +#define PSA_AEAD_FINISH_OUTPUT_MAX_SIZE (PSA_BLOCK_CIPHER_BLOCK_MAX_SIZE) + +/** A sufficient plaintext buffer size for psa_aead_verify(). + * + * If the size of the plaintext buffer is at least this large, it is + * guaranteed that psa_aead_verify() will not fail due to an + * insufficient plaintext buffer size. The actual size of the output may + * be smaller in any given call. + * + * See also #PSA_AEAD_VERIFY_OUTPUT_MAX_SIZE. + * + * \param key_type A symmetric key type that is + * compatible with algorithm \p alg. + * \param alg An AEAD algorithm + * (\c PSA_ALG_XXX value such that + * #PSA_ALG_IS_AEAD(\p alg) is true). + * + * \return A sufficient plaintext buffer size for the + * specified algorithm. + * If the key type or AEAD algorithm is not + * recognized, or the parameters are incompatible, + * return 0. + */ +#define PSA_AEAD_VERIFY_OUTPUT_SIZE(key_type, alg) \ + (PSA_AEAD_NONCE_LENGTH(key_type, alg) != 0 && \ + PSA_ALG_IS_AEAD_ON_BLOCK_CIPHER(alg) ? \ + PSA_BLOCK_CIPHER_BLOCK_LENGTH(key_type) : \ + 0u) + +/** A sufficient plaintext buffer size for psa_aead_verify(), for any of the + * supported key types and AEAD algorithms. + * + * See also #PSA_AEAD_VERIFY_OUTPUT_SIZE(\p key_type, \p alg). + */ +#define PSA_AEAD_VERIFY_OUTPUT_MAX_SIZE (PSA_BLOCK_CIPHER_BLOCK_MAX_SIZE) + +#define PSA_RSA_MINIMUM_PADDING_SIZE(alg) \ + (PSA_ALG_IS_RSA_OAEP(alg) ? \ + 2u * PSA_HASH_LENGTH(PSA_ALG_RSA_OAEP_GET_HASH(alg)) + 1u : \ + 11u /*PKCS#1v1.5*/) + +/** + * \brief ECDSA signature size for a given curve bit size + * + * \param curve_bits Curve size in bits. + * \return Signature size in bytes. + * + * \note This macro returns a compile-time constant if its argument is one. + */ +#define PSA_ECDSA_SIGNATURE_SIZE(curve_bits) \ + (PSA_BITS_TO_BYTES(curve_bits) * 2u) + +/** Sufficient signature buffer size for psa_sign_hash(). + * + * This macro returns a sufficient buffer size for a signature using a key + * of the specified type and size, with the specified algorithm. + * Note that the actual size of the signature may be smaller + * (some algorithms produce a variable-size signature). + * + * \warning This function may call its arguments multiple times or + * zero times, so you should not pass arguments that contain + * side effects. + * + * \param key_type An asymmetric key type (this may indifferently be a + * key pair type or a public key type). + * \param key_bits The size of the key in bits. + * \param alg The signature algorithm. + * + * \return If the parameters are valid and supported, return + * a buffer size in bytes that guarantees that + * psa_sign_hash() will not fail with + * #PSA_ERROR_BUFFER_TOO_SMALL. + * If the parameters are a valid combination that is not supported, + * return either a sensible size or 0. + * If the parameters are not valid, the + * return value is unspecified. + */ +#define PSA_SIGN_OUTPUT_SIZE(key_type, key_bits, alg) \ + (PSA_KEY_TYPE_IS_RSA(key_type) ? ((void) alg, PSA_BITS_TO_BYTES(key_bits)) : \ + PSA_KEY_TYPE_IS_ECC(key_type) ? PSA_ECDSA_SIGNATURE_SIZE(key_bits) : \ + ((void) alg, 0u)) + +#define PSA_VENDOR_ECDSA_SIGNATURE_MAX_SIZE \ + PSA_ECDSA_SIGNATURE_SIZE(PSA_VENDOR_ECC_MAX_CURVE_BITS) + +/** \def PSA_SIGNATURE_MAX_SIZE + * + * Maximum size of an asymmetric signature. + * + * This macro expands to a compile-time constant integer. This value + * is the maximum size of a signature in bytes. + */ +#define PSA_SIGNATURE_MAX_SIZE 1 + +#if (defined(PSA_WANT_ALG_ECDSA) || defined(PSA_WANT_ALG_DETERMINISTIC_ECDSA)) && \ + (PSA_VENDOR_ECDSA_SIGNATURE_MAX_SIZE > PSA_SIGNATURE_MAX_SIZE) +#undef PSA_SIGNATURE_MAX_SIZE +#define PSA_SIGNATURE_MAX_SIZE PSA_VENDOR_ECDSA_SIGNATURE_MAX_SIZE +#endif +#if (defined(PSA_WANT_ALG_RSA_PKCS1V15_SIGN) || defined(PSA_WANT_ALG_RSA_PSS)) && \ + (PSA_BITS_TO_BYTES(PSA_VENDOR_RSA_MAX_KEY_BITS) > PSA_SIGNATURE_MAX_SIZE) +#undef PSA_SIGNATURE_MAX_SIZE +#define PSA_SIGNATURE_MAX_SIZE PSA_BITS_TO_BYTES(PSA_VENDOR_RSA_MAX_KEY_BITS) +#endif + +/** Sufficient output buffer size for psa_asymmetric_encrypt(). + * + * This macro returns a sufficient buffer size for a ciphertext produced using + * a key of the specified type and size, with the specified algorithm. + * Note that the actual size of the ciphertext may be smaller, depending + * on the algorithm. + * + * \warning This function may call its arguments multiple times or + * zero times, so you should not pass arguments that contain + * side effects. + * + * \param key_type An asymmetric key type (this may indifferently be a + * key pair type or a public key type). + * \param key_bits The size of the key in bits. + * \param alg The asymmetric encryption algorithm. + * + * \return If the parameters are valid and supported, return + * a buffer size in bytes that guarantees that + * psa_asymmetric_encrypt() will not fail with + * #PSA_ERROR_BUFFER_TOO_SMALL. + * If the parameters are a valid combination that is not supported, + * return either a sensible size or 0. + * If the parameters are not valid, the + * return value is unspecified. + */ +#define PSA_ASYMMETRIC_ENCRYPT_OUTPUT_SIZE(key_type, key_bits, alg) \ + (PSA_KEY_TYPE_IS_RSA(key_type) ? \ + ((void) alg, PSA_BITS_TO_BYTES(key_bits)) : \ + 0u) + +/** A sufficient output buffer size for psa_asymmetric_encrypt(), for any + * supported asymmetric encryption. + * + * See also #PSA_ASYMMETRIC_ENCRYPT_OUTPUT_SIZE(\p key_type, \p key_bits, \p alg). + */ +/* This macro assumes that RSA is the only supported asymmetric encryption. */ +#define PSA_ASYMMETRIC_ENCRYPT_OUTPUT_MAX_SIZE \ + (PSA_BITS_TO_BYTES(PSA_VENDOR_RSA_MAX_KEY_BITS)) + +/** Sufficient output buffer size for psa_asymmetric_decrypt(). + * + * This macro returns a sufficient buffer size for a plaintext produced using + * a key of the specified type and size, with the specified algorithm. + * Note that the actual size of the plaintext may be smaller, depending + * on the algorithm. + * + * \warning This function may call its arguments multiple times or + * zero times, so you should not pass arguments that contain + * side effects. + * + * \param key_type An asymmetric key type (this may indifferently be a + * key pair type or a public key type). + * \param key_bits The size of the key in bits. + * \param alg The asymmetric encryption algorithm. + * + * \return If the parameters are valid and supported, return + * a buffer size in bytes that guarantees that + * psa_asymmetric_decrypt() will not fail with + * #PSA_ERROR_BUFFER_TOO_SMALL. + * If the parameters are a valid combination that is not supported, + * return either a sensible size or 0. + * If the parameters are not valid, the + * return value is unspecified. + */ +#define PSA_ASYMMETRIC_DECRYPT_OUTPUT_SIZE(key_type, key_bits, alg) \ + (PSA_KEY_TYPE_IS_RSA(key_type) ? \ + PSA_BITS_TO_BYTES(key_bits) - PSA_RSA_MINIMUM_PADDING_SIZE(alg) : \ + 0u) + +/** A sufficient output buffer size for psa_asymmetric_decrypt(), for any + * supported asymmetric decryption. + * + * This macro assumes that RSA is the only supported asymmetric encryption. + * + * See also #PSA_ASYMMETRIC_DECRYPT_OUTPUT_SIZE(\p key_type, \p key_bits, \p alg). + */ +#define PSA_ASYMMETRIC_DECRYPT_OUTPUT_MAX_SIZE \ + (PSA_BITS_TO_BYTES(PSA_VENDOR_RSA_MAX_KEY_BITS)) + +/* Maximum size of the ASN.1 encoding of an INTEGER with the specified + * number of bits. + * + * This definition assumes that bits <= 2^19 - 9 so that the length field + * is at most 3 bytes. The length of the encoding is the length of the + * bit string padded to a whole number of bytes plus: + * - 1 type byte; + * - 1 to 3 length bytes; + * - 0 to 1 bytes of leading 0 due to the sign bit. + */ +#define PSA_KEY_EXPORT_ASN1_INTEGER_MAX_SIZE(bits) \ + ((bits) / 8u + 5u) + +/* Maximum size of the export encoding of an RSA public key. + * Assumes that the public exponent is less than 2^32. + * + * RSAPublicKey ::= SEQUENCE { + * modulus INTEGER, -- n + * publicExponent INTEGER } -- e + * + * - 4 bytes of SEQUENCE overhead; + * - n : INTEGER; + * - 7 bytes for the public exponent. + */ +#define PSA_KEY_EXPORT_RSA_PUBLIC_KEY_MAX_SIZE(key_bits) \ + (PSA_KEY_EXPORT_ASN1_INTEGER_MAX_SIZE(key_bits) + 11u) + +/* Maximum size of the export encoding of an RSA key pair. + * Assumes that the public exponent is less than 2^32 and that the size + * difference between the two primes is at most 1 bit. + * + * RSAPrivateKey ::= SEQUENCE { + * version Version, -- 0 + * modulus INTEGER, -- N-bit + * publicExponent INTEGER, -- 32-bit + * privateExponent INTEGER, -- N-bit + * prime1 INTEGER, -- N/2-bit + * prime2 INTEGER, -- N/2-bit + * exponent1 INTEGER, -- N/2-bit + * exponent2 INTEGER, -- N/2-bit + * coefficient INTEGER, -- N/2-bit + * } + * + * - 4 bytes of SEQUENCE overhead; + * - 3 bytes of version; + * - 7 half-size INTEGERs plus 2 full-size INTEGERs, + * overapproximated as 9 half-size INTEGERS; + * - 7 bytes for the public exponent. + */ +#define PSA_KEY_EXPORT_RSA_KEY_PAIR_MAX_SIZE(key_bits) \ + (9u * PSA_KEY_EXPORT_ASN1_INTEGER_MAX_SIZE((key_bits) / 2u + 1u) + 14u) + +/* Maximum size of the export encoding of a DSA public key. + * + * SubjectPublicKeyInfo ::= SEQUENCE { + * algorithm AlgorithmIdentifier, + * subjectPublicKey BIT STRING } -- contains DSAPublicKey + * AlgorithmIdentifier ::= SEQUENCE { + * algorithm OBJECT IDENTIFIER, + * parameters Dss-Params } -- SEQUENCE of 3 INTEGERs + * DSAPublicKey ::= INTEGER -- public key, Y + * + * - 3 * 4 bytes of SEQUENCE overhead; + * - 1 + 1 + 7 bytes of algorithm (DSA OID); + * - 4 bytes of BIT STRING overhead; + * - 3 full-size INTEGERs (p, g, y); + * - 1 + 1 + 32 bytes for 1 sub-size INTEGER (q <= 256 bits). + */ +#define PSA_KEY_EXPORT_DSA_PUBLIC_KEY_MAX_SIZE(key_bits) \ + (PSA_KEY_EXPORT_ASN1_INTEGER_MAX_SIZE(key_bits) * 3u + 59u) + +/* Maximum size of the export encoding of a DSA key pair. + * + * DSAPrivateKey ::= SEQUENCE { + * version Version, -- 0 + * prime INTEGER, -- p + * subprime INTEGER, -- q + * generator INTEGER, -- g + * public INTEGER, -- y + * private INTEGER, -- x + * } + * + * - 4 bytes of SEQUENCE overhead; + * - 3 bytes of version; + * - 3 full-size INTEGERs (p, g, y); + * - 2 * (1 + 1 + 32) bytes for 2 sub-size INTEGERs (q, x <= 256 bits). + */ +#define PSA_KEY_EXPORT_DSA_KEY_PAIR_MAX_SIZE(key_bits) \ + (PSA_KEY_EXPORT_ASN1_INTEGER_MAX_SIZE(key_bits) * 3u + 75u) + +/* Maximum size of the export encoding of an ECC public key. + * + * The representation of an ECC public key is: + * - The byte 0x04; + * - `x_P` as a `ceiling(m/8)`-byte string, big-endian; + * - `y_P` as a `ceiling(m/8)`-byte string, big-endian; + * - where m is the bit size associated with the curve. + * + * - 1 byte + 2 * point size. + */ +#define PSA_KEY_EXPORT_ECC_PUBLIC_KEY_MAX_SIZE(key_bits) \ + (2u * PSA_BITS_TO_BYTES(key_bits) + 1u) + +/* Maximum size of the export encoding of an ECC key pair. + * + * An ECC key pair is represented by the secret value. + */ +#define PSA_KEY_EXPORT_ECC_KEY_PAIR_MAX_SIZE(key_bits) \ + (PSA_BITS_TO_BYTES(key_bits)) + +/* Maximum size of the export encoding of an DH key pair. + * + * An DH key pair is represented by the secret value. + */ +#define PSA_KEY_EXPORT_FFDH_KEY_PAIR_MAX_SIZE(key_bits) \ + (PSA_BITS_TO_BYTES(key_bits)) + +/* Maximum size of the export encoding of an DH public key. + */ +#define PSA_KEY_EXPORT_FFDH_PUBLIC_KEY_MAX_SIZE(key_bits) \ + (PSA_BITS_TO_BYTES(key_bits)) + +/* Maximum size of the export encoding of an SPAKE2+ public key. + * + * An SPAKE2+ public key is represented by the secret values w0 and L. + */ +#define PSA_KEY_EXPORT_SPAKE2P_PUBLIC_KEY_MAX_SIZE(key_bits) \ + (3u * PSA_BITS_TO_BYTES(key_bits) + 1u) + +/* Maximum size of the export encoding of an SPAKE2+ key pair. + * + * An SPAKE2+ key pair is represented by the secret values w0 and w1. + */ +#define PSA_KEY_EXPORT_SPAKE2P_KEY_PAIR_MAX_SIZE(key_bits) \ + (2u * PSA_BITS_TO_BYTES(key_bits)) + +/* Maximum size of the export encoding of an SRP public key. + * + * An SRP public key is represented by the password verifier. + */ +#define PSA_KEY_EXPORT_SRP_PUBLIC_KEY_MAX_SIZE(key_bits) \ + (PSA_BITS_TO_BYTES(key_bits)) + +/* Maximum size of the export encoding of an SRP key pair. + * + * An SRP key pair is represented by the password hash. + */ +#define PSA_KEY_EXPORT_SRP_KEY_PAIR_MAX_SIZE(key_bits) \ + (PSA_HASH_MAX_SIZE) + +/** Sufficient output buffer size for psa_export_key() or + * psa_export_public_key(). + * + * This macro returns a compile-time constant if its arguments are + * compile-time constants. + * + * \warning This macro may evaluate its arguments multiple times or + * zero times, so you should not pass arguments that contain + * side effects. + * + * The following code illustrates how to allocate enough memory to export + * a key by querying the key type and size at runtime. + * \code{c} + * psa_key_attributes_t attributes = PSA_KEY_ATTRIBUTES_INIT; + * psa_status_t status; + * status = psa_get_key_attributes(key, &attributes); + * if (status != PSA_SUCCESS) handle_error(...); + * psa_key_type_t key_type = psa_get_key_type(&attributes); + * size_t key_bits = psa_get_key_bits(&attributes); + * size_t buffer_size = PSA_EXPORT_KEY_OUTPUT_SIZE(key_type, key_bits); + * psa_reset_key_attributes(&attributes); + * uint8_t *buffer = malloc(buffer_size); + * if (buffer == NULL) handle_error(...); + * size_t buffer_length; + * status = psa_export_key(key, buffer, buffer_size, &buffer_length); + * if (status != PSA_SUCCESS) handle_error(...); + * \endcode + * + * \param key_type A supported key type. + * \param key_bits The size of the key in bits. + * + * \return If the parameters are valid and supported, return + * a buffer size in bytes that guarantees that + * psa_export_key() or psa_export_public_key() will not fail with + * #PSA_ERROR_BUFFER_TOO_SMALL. + * If the parameters are a valid combination that is not supported, + * return either a sensible size or 0. + * If the parameters are not valid, the return value is unspecified. + */ +#define PSA_EXPORT_KEY_OUTPUT_SIZE(key_type, key_bits) \ + (PSA_KEY_TYPE_IS_UNSTRUCTURED(key_type) ? PSA_BITS_TO_BYTES(key_bits) : \ + PSA_KEY_TYPE_IS_DH(key_type) ? PSA_BITS_TO_BYTES(key_bits) : \ + (key_type) == PSA_KEY_TYPE_RSA_KEY_PAIR ? PSA_KEY_EXPORT_RSA_KEY_PAIR_MAX_SIZE(key_bits) : \ + (key_type) == PSA_KEY_TYPE_RSA_PUBLIC_KEY ? PSA_KEY_EXPORT_RSA_PUBLIC_KEY_MAX_SIZE(key_bits) : \ + (key_type) == PSA_KEY_TYPE_DSA_KEY_PAIR ? PSA_KEY_EXPORT_DSA_KEY_PAIR_MAX_SIZE(key_bits) : \ + (key_type) == PSA_KEY_TYPE_DSA_PUBLIC_KEY ? PSA_KEY_EXPORT_DSA_PUBLIC_KEY_MAX_SIZE(key_bits) : \ + PSA_KEY_TYPE_IS_SPAKE2P_KEY_PAIR(key_type) ? 2u * PSA_BITS_TO_BYTES(key_bits) : \ + PSA_KEY_TYPE_IS_SPAKE2P_PUBLIC_KEY(key_type) ? 3u * PSA_BITS_TO_BYTES(key_bits) + 1u : \ + PSA_KEY_TYPE_IS_SRP_KEY_PAIR(key_type) ? PSA_HASH_MAX_SIZE : \ + PSA_KEY_TYPE_IS_SRP_PUBLIC_KEY(key_type) ? PSA_BITS_TO_BYTES(key_bits) : \ + PSA_KEY_TYPE_IS_ECC_KEY_PAIR(key_type) ? PSA_KEY_EXPORT_ECC_KEY_PAIR_MAX_SIZE(key_bits) : \ + PSA_KEY_TYPE_IS_ECC_PUBLIC_KEY(key_type) ? PSA_KEY_EXPORT_ECC_PUBLIC_KEY_MAX_SIZE(key_bits) : \ + 0u) + +/** Sufficient output buffer size for psa_export_public_key(). + * + * This macro returns a compile-time constant if its arguments are + * compile-time constants. + * + * \warning This macro may evaluate its arguments multiple times or + * zero times, so you should not pass arguments that contain + * side effects. + * + * The following code illustrates how to allocate enough memory to export + * a public key by querying the key type and size at runtime. + * \code{c} + * psa_key_attributes_t attributes = PSA_KEY_ATTRIBUTES_INIT; + * psa_status_t status; + * status = psa_get_key_attributes(key, &attributes); + * if (status != PSA_SUCCESS) handle_error(...); + * psa_key_type_t key_type = psa_get_key_type(&attributes); + * size_t key_bits = psa_get_key_bits(&attributes); + * size_t buffer_size = PSA_EXPORT_PUBLIC_KEY_OUTPUT_SIZE(key_type, key_bits); + * psa_reset_key_attributes(&attributes); + * uint8_t *buffer = malloc(buffer_size); + * if (buffer == NULL) handle_error(...); + * size_t buffer_length; + * status = psa_export_public_key(key, buffer, buffer_size, &buffer_length); + * if (status != PSA_SUCCESS) handle_error(...); + * \endcode + * + * \param key_type A public key or key pair key type. + * \param key_bits The size of the key in bits. + * + * \return If the parameters are valid and supported, return + * a buffer size in bytes that guarantees that + * psa_export_public_key() will not fail with + * #PSA_ERROR_BUFFER_TOO_SMALL. + * If the parameters are a valid combination that is not + * supported, return either a sensible size or 0. + * If the parameters are not valid, + * the return value is unspecified. + * + * If the parameters are valid and supported, + * return the same result as + * #PSA_EXPORT_KEY_OUTPUT_SIZE( + * \p #PSA_KEY_TYPE_PUBLIC_KEY_OF_KEY_PAIR(\p key_type), + * \p key_bits). + */ +#define PSA_EXPORT_PUBLIC_KEY_OUTPUT_SIZE(key_type, key_bits) \ + (PSA_KEY_TYPE_IS_RSA(key_type) ? PSA_KEY_EXPORT_RSA_PUBLIC_KEY_MAX_SIZE(key_bits) : \ + PSA_KEY_TYPE_IS_ECC(key_type) ? PSA_KEY_EXPORT_ECC_PUBLIC_KEY_MAX_SIZE(key_bits) : \ + PSA_KEY_TYPE_IS_DH(key_type) ? PSA_BITS_TO_BYTES(key_bits) : \ + PSA_KEY_TYPE_IS_SPAKE2P(key_type) ? 3u * PSA_BITS_TO_BYTES(key_bits) + 1u : \ + PSA_KEY_TYPE_IS_SRP(key_type) ? PSA_BITS_TO_BYTES(key_bits) : \ + 0u) + +/** Sufficient buffer size for exporting any asymmetric key pair. + * + * This macro expands to a compile-time constant integer. This value is + * a sufficient buffer size when calling psa_export_key() to export any + * asymmetric key pair, regardless of the exact key type and key size. + * + * See also #PSA_EXPORT_KEY_OUTPUT_SIZE(\p key_type, \p key_bits). + */ +#define PSA_EXPORT_KEY_PAIR_MAX_SIZE 1 + +#if defined(PSA_WANT_KEY_TYPE_ECC_KEY_PAIR_BASIC) && \ + (PSA_KEY_EXPORT_ECC_KEY_PAIR_MAX_SIZE(PSA_VENDOR_ECC_MAX_CURVE_BITS) > \ + PSA_EXPORT_KEY_PAIR_MAX_SIZE) +#undef PSA_EXPORT_KEY_PAIR_MAX_SIZE +#define PSA_EXPORT_KEY_PAIR_MAX_SIZE \ + PSA_KEY_EXPORT_ECC_KEY_PAIR_MAX_SIZE(PSA_VENDOR_ECC_MAX_CURVE_BITS) +#endif +#if defined(PSA_WANT_KEY_TYPE_RSA_KEY_PAIR_BASIC) && \ + (PSA_KEY_EXPORT_RSA_KEY_PAIR_MAX_SIZE(PSA_VENDOR_RSA_MAX_KEY_BITS) > \ + PSA_EXPORT_KEY_PAIR_MAX_SIZE) +#undef PSA_EXPORT_KEY_PAIR_MAX_SIZE +#define PSA_EXPORT_KEY_PAIR_MAX_SIZE \ + PSA_KEY_EXPORT_RSA_KEY_PAIR_MAX_SIZE(PSA_VENDOR_RSA_MAX_KEY_BITS) +#endif +#if defined(PSA_WANT_KEY_TYPE_DH_KEY_PAIR_BASIC) && \ + (PSA_KEY_EXPORT_FFDH_KEY_PAIR_MAX_SIZE(PSA_VENDOR_FFDH_MAX_KEY_BITS) > \ + PSA_EXPORT_KEY_PAIR_MAX_SIZE) +#undef PSA_EXPORT_KEY_PAIR_MAX_SIZE +#define PSA_EXPORT_KEY_PAIR_MAX_SIZE \ + PSA_KEY_EXPORT_FFDH_KEY_PAIR_MAX_SIZE(PSA_VENDOR_FFDH_MAX_KEY_BITS) +#endif +#if defined(PSA_WANT_KEY_TYPE_SPAKE2P_KEY_PAIR_BASIC) && \ + (PSA_KEY_EXPORT_SPAKE2P_KEY_PAIR_MAX_SIZE(PSA_VENDOR_ECC_MAX_CURVE_BITS) > \ + PSA_EXPORT_KEY_PAIR_MAX_SIZE) +#undef PSA_EXPORT_KEY_PAIR_MAX_SIZE +#define PSA_EXPORT_KEY_PAIR_MAX_SIZE \ + PSA_KEY_EXPORT_SPAKE2P_KEY_PAIR_MAX_SIZE(PSA_VENDOR_ECC_MAX_CURVE_BITS) +#endif +#if defined(PSA_WANT_KEY_TYPE_SRP_KEY_PAIR_BASIC) && \ + (PSA_KEY_EXPORT_SRP_KEY_PAIR_MAX_SIZE(PSA_VENDOR_FFDH_MAX_KEY_BITS) > \ + PSA_EXPORT_KEY_PAIR_MAX_SIZE) +#undef PSA_EXPORT_KEY_PAIR_MAX_SIZE +#define PSA_EXPORT_KEY_PAIR_MAX_SIZE \ + PSA_KEY_EXPORT_SRP_KEY_PAIR_MAX_SIZE(PSA_VENDOR_FFDH_MAX_KEY_BITS) +#endif + +/** Sufficient buffer size for exporting any asymmetric public key. + * + * This macro expands to a compile-time constant integer. This value is + * a sufficient buffer size when calling psa_export_key() or + * psa_export_public_key() to export any asymmetric public key, + * regardless of the exact key type and key size. + * + * See also #PSA_EXPORT_PUBLIC_KEY_OUTPUT_SIZE(\p key_type, \p key_bits). + */ +#define PSA_EXPORT_PUBLIC_KEY_MAX_SIZE 1 + +#if defined(PSA_WANT_KEY_TYPE_ECC_PUBLIC_KEY) && \ + (PSA_KEY_EXPORT_ECC_PUBLIC_KEY_MAX_SIZE(PSA_VENDOR_ECC_MAX_CURVE_BITS) > \ + PSA_EXPORT_PUBLIC_KEY_MAX_SIZE) +#undef PSA_EXPORT_PUBLIC_KEY_MAX_SIZE +#define PSA_EXPORT_PUBLIC_KEY_MAX_SIZE \ + PSA_KEY_EXPORT_ECC_PUBLIC_KEY_MAX_SIZE(PSA_VENDOR_ECC_MAX_CURVE_BITS) +#endif +#if defined(PSA_WANT_KEY_TYPE_RSA_PUBLIC_KEY) && \ + (PSA_KEY_EXPORT_RSA_PUBLIC_KEY_MAX_SIZE(PSA_VENDOR_RSA_MAX_KEY_BITS) > \ + PSA_EXPORT_PUBLIC_KEY_MAX_SIZE) +#undef PSA_EXPORT_PUBLIC_KEY_MAX_SIZE +#define PSA_EXPORT_PUBLIC_KEY_MAX_SIZE \ + PSA_KEY_EXPORT_RSA_PUBLIC_KEY_MAX_SIZE(PSA_VENDOR_RSA_MAX_KEY_BITS) +#endif +#if defined(PSA_WANT_KEY_TYPE_DH_PUBLIC_KEY) && \ + (PSA_KEY_EXPORT_FFDH_PUBLIC_KEY_MAX_SIZE(PSA_VENDOR_FFDH_MAX_KEY_BITS) > \ + PSA_EXPORT_PUBLIC_KEY_MAX_SIZE) +#undef PSA_EXPORT_PUBLIC_KEY_MAX_SIZE +#define PSA_EXPORT_PUBLIC_KEY_MAX_SIZE \ + PSA_KEY_EXPORT_FFDH_PUBLIC_KEY_MAX_SIZE(PSA_VENDOR_FFDH_MAX_KEY_BITS) +#endif +#if defined(PSA_WANT_KEY_TYPE_SPAKE2P_PUBLIC_KEY) && \ + (PSA_KEY_EXPORT_SPAKE2P_PUBLIC_KEY_MAX_SIZE(PSA_VENDOR_ECC_MAX_CURVE_BITS) > \ + PSA_EXPORT_PUBLIC_KEY_MAX_SIZE) +#undef PSA_EXPORT_PUBLIC_KEY_MAX_SIZE +#define PSA_EXPORT_PUBLIC_KEY_MAX_SIZE \ + PSA_KEY_EXPORT_SPAKE2P_PUBLIC_KEY_MAX_SIZE(PSA_VENDOR_ECC_MAX_CURVE_BITS) +#endif +#if defined(PSA_WANT_KEY_TYPE_SRP_PUBLIC_KEY) && \ + (PSA_KEY_EXPORT_SRP_PUBLIC_KEY_MAX_SIZE(PSA_VENDOR_FFDH_MAX_KEY_BITS) > \ + PSA_EXPORT_PUBLIC_KEY_MAX_SIZE) +#undef PSA_EXPORT_PUBLIC_KEY_MAX_SIZE +#define PSA_EXPORT_PUBLIC_KEY_MAX_SIZE \ + PSA_KEY_EXPORT_SRP_PUBLIC_KEY_MAX_SIZE(PSA_VENDOR_FFDH_MAX_KEY_BITS) +#endif + +/** Sufficient output buffer size for psa_raw_key_agreement(). + * + * This macro returns a compile-time constant if its arguments are + * compile-time constants. + * + * \warning This macro may evaluate its arguments multiple times or + * zero times, so you should not pass arguments that contain + * side effects. + * + * See also #PSA_RAW_KEY_AGREEMENT_OUTPUT_MAX_SIZE. + * + * \param key_type A supported key type. + * \param key_bits The size of the key in bits. + * + * \return If the parameters are valid and supported, return + * a buffer size in bytes that guarantees that + * psa_raw_key_agreement() will not fail with + * #PSA_ERROR_BUFFER_TOO_SMALL. + * If the parameters are a valid combination that + * is not supported, return either a sensible size or 0. + * If the parameters are not valid, + * the return value is unspecified. + */ +#define PSA_RAW_KEY_AGREEMENT_OUTPUT_SIZE(key_type, key_bits) \ + ((PSA_KEY_TYPE_IS_ECC_KEY_PAIR(key_type) || \ + PSA_KEY_TYPE_IS_DH_KEY_PAIR(key_type)) ? PSA_BITS_TO_BYTES(key_bits) : 0u) + +/** Maximum size of the output from psa_raw_key_agreement(). + * + * This macro expands to a compile-time constant integer. This value is the + * maximum size of the output any raw key agreement algorithm, in bytes. + * + * See also #PSA_RAW_KEY_AGREEMENT_OUTPUT_SIZE(\p key_type, \p key_bits). + */ +#define PSA_RAW_KEY_AGREEMENT_OUTPUT_MAX_SIZE 1 + +#if defined(PSA_WANT_ALG_ECDH) && \ + (PSA_BITS_TO_BYTES(PSA_VENDOR_ECC_MAX_CURVE_BITS) > PSA_RAW_KEY_AGREEMENT_OUTPUT_MAX_SIZE) +#undef PSA_RAW_KEY_AGREEMENT_OUTPUT_MAX_SIZE +#define PSA_RAW_KEY_AGREEMENT_OUTPUT_MAX_SIZE PSA_BITS_TO_BYTES(PSA_VENDOR_ECC_MAX_CURVE_BITS) +#endif +#if defined(PSA_WANT_ALG_FFDH) && \ + (PSA_BITS_TO_BYTES(PSA_VENDOR_FFDH_MAX_KEY_BITS) > PSA_RAW_KEY_AGREEMENT_OUTPUT_MAX_SIZE) +#undef PSA_RAW_KEY_AGREEMENT_OUTPUT_MAX_SIZE +#define PSA_RAW_KEY_AGREEMENT_OUTPUT_MAX_SIZE PSA_BITS_TO_BYTES(PSA_VENDOR_FFDH_MAX_KEY_BITS) +#endif + +/** The default IV size for a cipher algorithm, in bytes. + * + * The IV that is generated as part of a call to #psa_cipher_encrypt() is always + * the default IV length for the algorithm. + * + * This macro can be used to allocate a buffer of sufficient size to + * store the IV output from #psa_cipher_generate_iv() when using + * a multi-part cipher operation. + * + * See also #PSA_CIPHER_IV_MAX_SIZE. + * + * \warning This macro may evaluate its arguments multiple times or + * zero times, so you should not pass arguments that contain + * side effects. + * + * \param key_type A symmetric key type that is compatible with algorithm \p alg. + * + * \param alg A cipher algorithm (\c PSA_ALG_XXX value such that #PSA_ALG_IS_CIPHER(\p alg) is true). + * + * \return The default IV size for the specified key type and algorithm. + * If the algorithm does not use an IV, return 0. + * If the key type or cipher algorithm is not recognized, + * or the parameters are incompatible, return 0. + */ +#define PSA_CIPHER_IV_LENGTH(key_type, alg) \ + (PSA_BLOCK_CIPHER_BLOCK_LENGTH(key_type) > 1 && \ + ((alg) == PSA_ALG_CTR || \ + (alg) == PSA_ALG_CFB || \ + (alg) == PSA_ALG_OFB || \ + (alg) == PSA_ALG_XTS || \ + (alg) == PSA_ALG_CBC_NO_PADDING || \ + (alg) == PSA_ALG_CBC_PKCS7) ? PSA_BLOCK_CIPHER_BLOCK_LENGTH(key_type) : \ + (key_type) == PSA_KEY_TYPE_CHACHA20 && \ + (alg) == PSA_ALG_STREAM_CIPHER ? 12u : \ + (alg) == PSA_ALG_CCM_STAR_NO_TAG ? 13u : \ + 0u) + +/** The maximum IV size for all supported cipher algorithms, in bytes. + * + * See also #PSA_CIPHER_IV_LENGTH(). + */ +#define PSA_CIPHER_IV_MAX_SIZE 16u + +/** The maximum size of the output of psa_cipher_encrypt(), in bytes. + * + * If the size of the output buffer is at least this large, it is guaranteed + * that psa_cipher_encrypt() will not fail due to an insufficient buffer size. + * Depending on the algorithm, the actual size of the output might be smaller. + * + * See also #PSA_CIPHER_ENCRYPT_OUTPUT_MAX_SIZE(\p input_length). + * + * \warning This macro may evaluate its arguments multiple times or + * zero times, so you should not pass arguments that contain + * side effects. + * + * \param key_type A symmetric key type that is compatible with algorithm + * alg. + * \param alg A cipher algorithm (\c PSA_ALG_XXX value such that + * #PSA_ALG_IS_CIPHER(\p alg) is true). + * \param input_length Size of the input in bytes. + * + * \return A sufficient output size for the specified key type and + * algorithm. If the key type or cipher algorithm is not + * recognized, or the parameters are incompatible, + * return 0. + */ +#define PSA_CIPHER_ENCRYPT_OUTPUT_SIZE(key_type, alg, input_length) \ + (alg == PSA_ALG_CBC_PKCS7 ? \ + (PSA_BLOCK_CIPHER_BLOCK_LENGTH(key_type) != 0 ? \ + PSA_ROUND_UP_TO_MULTIPLE(PSA_BLOCK_CIPHER_BLOCK_LENGTH(key_type), \ + (input_length) + 1u) + \ + PSA_CIPHER_IV_LENGTH((key_type), (alg)) : 0u) : \ + (PSA_ALG_IS_CIPHER(alg) ? \ + (input_length) + PSA_CIPHER_IV_LENGTH((key_type), (alg)) : \ + 0u)) + +/** A sufficient output buffer size for psa_cipher_encrypt(), for any of the + * supported key types and cipher algorithms. + * + * If the size of the output buffer is at least this large, it is guaranteed + * that psa_cipher_encrypt() will not fail due to an insufficient buffer size. + * + * See also #PSA_CIPHER_ENCRYPT_OUTPUT_SIZE(\p key_type, \p alg, \p input_length). + * + * \param input_length Size of the input in bytes. + * + */ +#define PSA_CIPHER_ENCRYPT_OUTPUT_MAX_SIZE(input_length) \ + (PSA_ROUND_UP_TO_MULTIPLE(PSA_BLOCK_CIPHER_BLOCK_MAX_SIZE, \ + (input_length) + 1u) + \ + PSA_CIPHER_IV_MAX_SIZE) + +/** The maximum size of the output of psa_cipher_decrypt(), in bytes. + * + * If the size of the output buffer is at least this large, it is guaranteed + * that psa_cipher_decrypt() will not fail due to an insufficient buffer size. + * Depending on the algorithm, the actual size of the output might be smaller. + * + * See also #PSA_CIPHER_DECRYPT_OUTPUT_MAX_SIZE(\p input_length). + * + * \param key_type A symmetric key type that is compatible with algorithm + * alg. + * \param alg A cipher algorithm (\c PSA_ALG_XXX value such that + * #PSA_ALG_IS_CIPHER(\p alg) is true). + * \param input_length Size of the input in bytes. + * + * \return A sufficient output size for the specified key type and + * algorithm. If the key type or cipher algorithm is not + * recognized, or the parameters are incompatible, + * return 0. + */ +#define PSA_CIPHER_DECRYPT_OUTPUT_SIZE(key_type, alg, input_length) \ + (PSA_ALG_IS_CIPHER(alg) && \ + ((key_type) & PSA_KEY_TYPE_CATEGORY_MASK) == PSA_KEY_TYPE_CATEGORY_SYMMETRIC ? \ + (input_length) : \ + 0u) + +/** A sufficient output buffer size for psa_cipher_decrypt(), for any of the + * supported key types and cipher algorithms. + * + * If the size of the output buffer is at least this large, it is guaranteed + * that psa_cipher_decrypt() will not fail due to an insufficient buffer size. + * + * See also #PSA_CIPHER_DECRYPT_OUTPUT_SIZE(\p key_type, \p alg, \p input_length). + * + * \param input_length Size of the input in bytes. + */ +#define PSA_CIPHER_DECRYPT_OUTPUT_MAX_SIZE(input_length) \ + (input_length) + +/** A sufficient output buffer size for psa_cipher_update(). + * + * If the size of the output buffer is at least this large, it is guaranteed + * that psa_cipher_update() will not fail due to an insufficient buffer size. + * The actual size of the output might be smaller in any given call. + * + * See also #PSA_CIPHER_UPDATE_OUTPUT_MAX_SIZE(\p input_length). + * + * \param key_type A symmetric key type that is compatible with algorithm + * alg. + * \param alg A cipher algorithm (PSA_ALG_XXX value such that + * #PSA_ALG_IS_CIPHER(\p alg) is true). + * \param input_length Size of the input in bytes. + * + * \return A sufficient output size for the specified key type and + * algorithm. If the key type or cipher algorithm is not + * recognized, or the parameters are incompatible, return 0. + */ +#define PSA_CIPHER_UPDATE_OUTPUT_SIZE(key_type, alg, input_length) \ + (PSA_ALG_IS_CIPHER(alg) ? \ + (PSA_BLOCK_CIPHER_BLOCK_LENGTH(key_type) != 0 ? \ + (((alg) == PSA_ALG_CBC_PKCS7 || \ + (alg) == PSA_ALG_CBC_NO_PADDING || \ + (alg) == PSA_ALG_ECB_NO_PADDING) ? \ + PSA_ROUND_UP_TO_MULTIPLE(PSA_BLOCK_CIPHER_BLOCK_LENGTH(key_type), \ + input_length) : \ + (input_length)) : 0u) : \ + 0u) + +/** A sufficient output buffer size for psa_cipher_update(), for any of the + * supported key types and cipher algorithms. + * + * If the size of the output buffer is at least this large, it is guaranteed + * that psa_cipher_update() will not fail due to an insufficient buffer size. + * + * See also #PSA_CIPHER_UPDATE_OUTPUT_SIZE(\p key_type, \p alg, \p input_length). + * + * \param input_length Size of the input in bytes. + */ +#define PSA_CIPHER_UPDATE_OUTPUT_MAX_SIZE(input_length) \ + (PSA_ROUND_UP_TO_MULTIPLE(PSA_BLOCK_CIPHER_BLOCK_MAX_SIZE, input_length)) + +/** A sufficient ciphertext buffer size for psa_cipher_finish(). + * + * If the size of the ciphertext buffer is at least this large, it is + * guaranteed that psa_cipher_finish() will not fail due to an insufficient + * ciphertext buffer size. The actual size of the output might be smaller in + * any given call. + * + * See also #PSA_CIPHER_FINISH_OUTPUT_MAX_SIZE(). + * + * \param key_type A symmetric key type that is compatible with algorithm + * alg. + * \param alg A cipher algorithm (PSA_ALG_XXX value such that + * #PSA_ALG_IS_CIPHER(\p alg) is true). + * \return A sufficient output size for the specified key type and + * algorithm. If the key type or cipher algorithm is not + * recognized, or the parameters are incompatible, return 0. + */ +#define PSA_CIPHER_FINISH_OUTPUT_SIZE(key_type, alg) \ + (PSA_ALG_IS_CIPHER(alg) ? \ + (alg == PSA_ALG_CBC_PKCS7 ? \ + PSA_BLOCK_CIPHER_BLOCK_LENGTH(key_type) : \ + 0u) : \ + 0u) + +/** A sufficient ciphertext buffer size for psa_cipher_finish(), for any of the + * supported key types and cipher algorithms. + * + * See also #PSA_CIPHER_FINISH_OUTPUT_SIZE(\p key_type, \p alg). + */ +#define PSA_CIPHER_FINISH_OUTPUT_MAX_SIZE \ + (PSA_BLOCK_CIPHER_BLOCK_MAX_SIZE) + +#endif /* PSA_CRYPTO_SIZES_H */ diff --git a/nrfdemo/build/tfm/api_ns/interface/include/psa/crypto_struct.h b/nrfdemo/build/tfm/api_ns/interface/include/psa/crypto_struct.h new file mode 100644 index 0000000..1cbbe40 --- /dev/null +++ b/nrfdemo/build/tfm/api_ns/interface/include/psa/crypto_struct.h @@ -0,0 +1,267 @@ +/* + * Copyright (c) 2018-2022, Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: BSD-3-Clause + * + */ +/** + * \file psa/crypto_struct.h + * + * \brief PSA cryptography module: structured type implementations + * + * \note This file may not be included directly. Applications must + * include psa/crypto.h. + * + * This file contains the definitions of some data structures with + * implementation-specific definitions. + * + * In implementations with isolation between the application and the + * cryptography module, it is expected that the front-end and the back-end + * would have different versions of this file. + */ + +#ifndef PSA_CRYPTO_STRUCT_H +#define PSA_CRYPTO_STRUCT_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* + * Note that the below structures are different from the decalrations in + * mbed-crypto. This is because TF-M maintains 'front-end' and 'back-end' + * versions of this header. In the front-end version, exported to NS + * clients in interface/include/psa, a crypto operation is defined as an + * opaque handle to a context in the Crypto service. The back-end + * version, directly included from the mbed-crypto repo by the Crypto + * service, contains the full definition of the operation structs. + * + * One of the functions of the Crypto service is to allocate the back-end + * operation contexts in its own partition memory (in crypto_alloc.c), + * and then do the mapping between front-end operation handles passed by + * NS clients and the corresponding back-end operation contexts. The + * advantage of doing it this way is that internal mbed-crypto state is never + * exposed to the NS client. + */ + +struct psa_hash_operation_s +{ + uint32_t handle; +}; + +#define PSA_HASH_OPERATION_INIT {0} +static inline struct psa_hash_operation_s psa_hash_operation_init(void) +{ + const struct psa_hash_operation_s v = PSA_HASH_OPERATION_INIT; + return v; +} + +struct psa_mac_operation_s +{ + uint32_t handle; +}; + +#define PSA_MAC_OPERATION_INIT {0} +static inline struct psa_mac_operation_s psa_mac_operation_init(void) +{ + const struct psa_mac_operation_s v = PSA_MAC_OPERATION_INIT; + return v; +} + +struct psa_cipher_operation_s +{ + uint32_t handle; +}; + +#define PSA_CIPHER_OPERATION_INIT {0} +static inline struct psa_cipher_operation_s psa_cipher_operation_init(void) +{ + const struct psa_cipher_operation_s v = PSA_CIPHER_OPERATION_INIT; + return v; +} + +struct psa_aead_operation_s +{ + uint32_t handle; +}; + +#define PSA_AEAD_OPERATION_INIT {0} +static inline struct psa_aead_operation_s psa_aead_operation_init(void) +{ + const struct psa_aead_operation_s v = PSA_AEAD_OPERATION_INIT; + return v; +} + +struct psa_key_derivation_s +{ + uint32_t handle; +}; + +#define PSA_KEY_DERIVATION_OPERATION_INIT {0} +static inline struct psa_key_derivation_s psa_key_derivation_operation_init(void) +{ + const struct psa_key_derivation_s v = PSA_KEY_DERIVATION_OPERATION_INIT; + return v; +} + +/* The type used internally for key sizes. + * Public interfaces use size_t, but internally we use a smaller type. */ +typedef uint16_t psa_key_bits_t; +/* The maximum value of the type used to represent bit-sizes. + * This is used to mark an invalid key size. */ +#define PSA_KEY_BITS_TOO_LARGE ((psa_key_bits_t) -1) +/* The maximum size of a key in bits. + * Currently defined as the maximum that can be represented, rounded down + * to a whole number of bytes. + * This is an uncast value so that it can be used in preprocessor + * conditionals. */ +#define PSA_MAX_KEY_BITS 0xfff8 + +/* On the client side, only some key attributes are visible. + * The server has a different definition of psa_key_attributes_s which + * maintains more attributes. + */ +#include "crypto_client_struct.h" +struct psa_key_attributes_s { + struct psa_client_key_attributes_s client; +}; + +#define PSA_KEY_ATTRIBUTES_INIT {PSA_CLIENT_KEY_ATTRIBUTES_INIT} + +static inline struct psa_key_attributes_s psa_key_attributes_init(void) +{ + const struct psa_key_attributes_s v = PSA_KEY_ATTRIBUTES_INIT; + return v; +} + +static inline void psa_set_key_id(psa_key_attributes_t *attributes, + mbedtls_svc_key_id_t key) +{ + psa_key_lifetime_t lifetime = attributes->client.lifetime; + + attributes->client.id = (psa_key_id_t)key; + + if (PSA_KEY_LIFETIME_IS_VOLATILE(lifetime)) + { + attributes->client.lifetime = + PSA_KEY_LIFETIME_FROM_PERSISTENCE_AND_LOCATION( + PSA_KEY_LIFETIME_PERSISTENT, + PSA_KEY_LIFETIME_GET_LOCATION(lifetime)); + } +} + +static inline mbedtls_svc_key_id_t psa_get_key_id( + const psa_key_attributes_t *attributes) +{ + return (mbedtls_svc_key_id_t)attributes->client.id; +} + +static inline void psa_set_key_lifetime(psa_key_attributes_t *attributes, + psa_key_lifetime_t lifetime) +{ + attributes->client.lifetime = lifetime; + if (PSA_KEY_LIFETIME_IS_VOLATILE(lifetime)) + { + attributes->client.id = 0; + } +} + +static inline psa_key_lifetime_t psa_get_key_lifetime( + const psa_key_attributes_t *attributes) +{ + return attributes->client.lifetime; +} + +static inline void psa_extend_key_usage_flags(psa_key_usage_t *usage_flags) +{ + if (*usage_flags & PSA_KEY_USAGE_SIGN_HASH) { + *usage_flags |= PSA_KEY_USAGE_SIGN_MESSAGE; + } + + if (*usage_flags & PSA_KEY_USAGE_VERIFY_HASH) { + *usage_flags |= PSA_KEY_USAGE_VERIFY_MESSAGE; + } +} + +static inline void psa_set_key_usage_flags(psa_key_attributes_t *attributes, + psa_key_usage_t usage_flags) +{ + psa_extend_key_usage_flags(&usage_flags); + attributes->client.usage = usage_flags; +} + +static inline psa_key_usage_t psa_get_key_usage_flags( + const psa_key_attributes_t *attributes) +{ + return attributes->client.usage; +} + +static inline void psa_set_key_algorithm(psa_key_attributes_t *attributes, + psa_algorithm_t alg) +{ + attributes->client.alg = alg; +} + +static inline psa_algorithm_t psa_get_key_algorithm( + const psa_key_attributes_t *attributes) +{ + return attributes->client.alg; +} + +static inline void psa_set_key_type(psa_key_attributes_t *attributes, + psa_key_type_t type) +{ + attributes->client.type = type; +} + +static inline psa_key_type_t psa_get_key_type( + const psa_key_attributes_t *attributes) +{ + return attributes->client.type; +} + +static inline void psa_set_key_bits(psa_key_attributes_t *attributes, + size_t bits) +{ + if (bits > PSA_MAX_KEY_BITS) { + attributes->client.bits = PSA_KEY_BITS_TOO_LARGE; + } else { + attributes->client.bits = bits; + } +} + +static inline size_t psa_get_key_bits( + const psa_key_attributes_t *attributes) +{ + return attributes->client.bits; +} + +struct psa_pake_cipher_suite_s { + psa_algorithm_t algorithm; + psa_pake_primitive_t primitive; + uint32_t key_confirmation; +}; + +#define PSA_PAKE_CIPHER_SUITE_INIT {PSA_ALG_NONE, 0, 0} +static inline struct psa_pake_cipher_suite_s psa_pake_cipher_suite_init(void) +{ + const struct psa_pake_cipher_suite_s v = PSA_PAKE_CIPHER_SUITE_INIT; + return v; +} + +struct psa_pake_operation_s { + uint32_t handle; +}; + +#define PSA_PAKE_OPERATION_INIT {0} +static inline struct psa_pake_operation_s psa_pake_operation_init(void) +{ + const struct psa_pake_operation_s v = PSA_PAKE_OPERATION_INIT; + return v; +} + +#ifdef __cplusplus +} +#endif + +#endif /* PSA_CRYPTO_STRUCT_H */ diff --git a/nrfdemo/build/tfm/api_ns/interface/include/psa/crypto_types.h b/nrfdemo/build/tfm/api_ns/interface/include/psa/crypto_types.h new file mode 100644 index 0000000..01feaeb --- /dev/null +++ b/nrfdemo/build/tfm/api_ns/interface/include/psa/crypto_types.h @@ -0,0 +1,500 @@ +/* + * Copyright (c) 2018-2023, Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: BSD-3-Clause + * + */ +/** + * \file psa/crypto_types.h + * + * \brief PSA cryptography module: type aliases. + * + * \note This file may not be included directly. Applications must + * include psa/crypto.h. Drivers must include the appropriate driver + * header file. + * + * This file contains portable definitions of integral types for properties + * of cryptographic keys, designations of cryptographic algorithms, and + * error codes returned by the library. + * + * This header file does not declare any function. + */ + +#ifndef PSA_CRYPTO_TYPES_H +#define PSA_CRYPTO_TYPES_H + +#if defined(MBEDTLS_PSA_CRYPTO_PLATFORM_FILE) +#include MBEDTLS_PSA_CRYPTO_PLATFORM_FILE +#else +#include "crypto_platform.h" +#endif + +#include <stdint.h> + +/** \defgroup error Error codes + * @{ + */ + +/** + * \brief Function return status. + * + * This is either #PSA_SUCCESS (which is zero), indicating success, + * or a small negative value indicating that an error occurred. Errors are + * encoded as one of the \c PSA_ERROR_xxx values defined here. */ +/* If #PSA_SUCCESS is already defined, it means that #psa_status_t + * is also defined in an external header, so prevent its multiple + * definition. + */ +#ifndef PSA_SUCCESS +typedef int32_t psa_status_t; +#endif + +/**@}*/ + +/** \defgroup crypto_types Key and algorithm types + * @{ + */ + +/** \brief Encoding of a key type. + * + * Values of this type are generally constructed by macros called + * `PSA_KEY_TYPE_xxx`. + * + * \note Values of this type are encoded in the persistent key store. + * Any changes to existing values will require bumping the storage + * format version and providing a translation when reading the old + * format. + */ +typedef uint16_t psa_key_type_t; + +/** The type of PSA elliptic curve family identifiers. + * + * Values of this type are generally constructed by macros called + * `PSA_ECC_FAMILY_xxx`. + * + * The curve identifier is required to create an ECC key using the + * PSA_KEY_TYPE_ECC_KEY_PAIR() or PSA_KEY_TYPE_ECC_PUBLIC_KEY() + * macros. + * + * Values defined by this standard will never be in the range 0x80-0xff. + * Vendors who define additional families must use an encoding in this range. + * + * \note Values of this type are encoded in the persistent key store. + * Any changes to existing values will require bumping the storage + * format version and providing a translation when reading the old + * format. + */ +typedef uint8_t psa_ecc_family_t; + +/** The type of PSA Diffie-Hellman group family identifiers. + * + * Values of this type are generally constructed by macros called + * `PSA_DH_FAMILY_xxx`. + * + * The group identifier is required to create a Diffie-Hellman key using the + * PSA_KEY_TYPE_DH_KEY_PAIR() or PSA_KEY_TYPE_DH_PUBLIC_KEY() + * macros. + * + * Values defined by this standard will never be in the range 0x80-0xff. + * Vendors who define additional families must use an encoding in this range. + * + * \note Values of this type are encoded in the persistent key store. + * Any changes to existing values will require bumping the storage + * format version and providing a translation when reading the old + * format. + */ +typedef uint8_t psa_dh_family_t; + +/** \brief Encoding of a cryptographic algorithm. + * + * Values of this type are generally constructed by macros called + * `PSA_ALG_xxx`. + * + * For algorithms that can be applied to multiple key types, this type + * does not encode the key type. For example, for symmetric ciphers + * based on a block cipher, #psa_algorithm_t encodes the block cipher + * mode and the padding mode while the block cipher itself is encoded + * via #psa_key_type_t. + * + * \note Values of this type are encoded in the persistent key store. + * Any changes to existing values will require bumping the storage + * format version and providing a translation when reading the old + * format. + */ +typedef uint32_t psa_algorithm_t; + +/**@}*/ + +/** \defgroup key_lifetimes Key lifetimes + * @{ + */ + +/** Encoding of key lifetimes. + * + * The lifetime of a key indicates where it is stored and what system actions + * may create and destroy it. + * + * Lifetime values have the following structure: + * - Bits 0-7 (#PSA_KEY_LIFETIME_GET_PERSISTENCE(\c lifetime)): + * persistence level. This value indicates what device management + * actions can cause it to be destroyed. In particular, it indicates + * whether the key is _volatile_ or _persistent_. + * See ::psa_key_persistence_t for more information. + * - Bits 8-31 (#PSA_KEY_LIFETIME_GET_LOCATION(\c lifetime)): + * location indicator. This value indicates which part of the system + * has access to the key material and can perform operations using the key. + * See ::psa_key_location_t for more information. + * + * Volatile keys are automatically destroyed when the application instance + * terminates or on a power reset of the device. Persistent keys are + * preserved until the application explicitly destroys them or until an + * integration-specific device management event occurs (for example, + * a factory reset). + * + * Persistent keys have a key identifier of type #mbedtls_svc_key_id_t. + * This identifier remains valid throughout the lifetime of the key, + * even if the application instance that created the key terminates. + * The application can call psa_open_key() to open a persistent key that + * it created previously. + * + * The default lifetime of a key is #PSA_KEY_LIFETIME_VOLATILE. The lifetime + * #PSA_KEY_LIFETIME_PERSISTENT is supported if persistent storage is + * available. Other lifetime values may be supported depending on the + * library configuration. + * + * Values of this type are generally constructed by macros called + * `PSA_KEY_LIFETIME_xxx`. + * + * \note Values of this type are encoded in the persistent key store. + * Any changes to existing values will require bumping the storage + * format version and providing a translation when reading the old + * format. + */ +typedef uint32_t psa_key_lifetime_t; + +/** Encoding of key persistence levels. + * + * What distinguishes different persistence levels is what device management + * events may cause keys to be destroyed. _Volatile_ keys are destroyed + * by a power reset. Persistent keys may be destroyed by events such as + * a transfer of ownership or a factory reset. What management events + * actually affect persistent keys at different levels is outside the + * scope of the PSA Cryptography specification. + * + * The PSA Cryptography specification defines the following values of + * persistence levels: + * - \c 0 = #PSA_KEY_PERSISTENCE_VOLATILE: volatile key. + * A volatile key is automatically destroyed by the implementation when + * the application instance terminates. In particular, a volatile key + * is automatically destroyed on a power reset of the device. + * - \c 1 = #PSA_KEY_PERSISTENCE_DEFAULT: + * persistent key with a default lifetime. + * - \c 2-254: currently not supported by Mbed TLS. + * - \c 255 = #PSA_KEY_PERSISTENCE_READ_ONLY: + * read-only or write-once key. + * A key with this persistence level cannot be destroyed. + * Mbed TLS does not currently offer a way to create such keys, but + * integrations of Mbed TLS can use it for built-in keys that the + * application cannot modify (for example, a hardware unique key (HUK)). + * + * \note Key persistence levels are 8-bit values. Key management + * interfaces operate on lifetimes (type ::psa_key_lifetime_t) which + * encode the persistence as the lower 8 bits of a 32-bit value. + * + * \note Values of this type are encoded in the persistent key store. + * Any changes to existing values will require bumping the storage + * format version and providing a translation when reading the old + * format. + */ +typedef uint8_t psa_key_persistence_t; + +/** Encoding of key location indicators. + * + * If an integration of Mbed TLS can make calls to external + * cryptoprocessors such as secure elements, the location of a key + * indicates which secure element performs the operations on the key. + * Depending on the design of the secure element, the key + * material may be stored either in the secure element, or + * in wrapped (encrypted) form alongside the key metadata in the + * primary local storage. + * + * The PSA Cryptography API specification defines the following values of + * location indicators: + * - \c 0: primary local storage. + * This location is always available. + * The primary local storage is typically the same storage area that + * contains the key metadata. + * - \c 1: primary secure element. + * Integrations of Mbed TLS should support this value if there is a secure + * element attached to the operating environment. + * As a guideline, secure elements may provide higher resistance against + * side channel and physical attacks than the primary local storage, but may + * have restrictions on supported key types, sizes, policies and operations + * and may have different performance characteristics. + * - \c 2-0x7fffff: other locations defined by a PSA specification. + * The PSA Cryptography API does not currently assign any meaning to these + * locations, but future versions of that specification or other PSA + * specifications may do so. + * - \c 0x800000-0xffffff: vendor-defined locations. + * No PSA specification will assign a meaning to locations in this range. + * + * \note Key location indicators are 24-bit values. Key management + * interfaces operate on lifetimes (type ::psa_key_lifetime_t) which + * encode the location as the upper 24 bits of a 32-bit value. + * + * \note Values of this type are encoded in the persistent key store. + * Any changes to existing values will require bumping the storage + * format version and providing a translation when reading the old + * format. + */ +typedef uint32_t psa_key_location_t; + +/** Encoding of identifiers of persistent keys. + * + * - Applications may freely choose key identifiers in the range + * #PSA_KEY_ID_USER_MIN to #PSA_KEY_ID_USER_MAX. + * - The implementation may define additional key identifiers in the range + * #PSA_KEY_ID_VENDOR_MIN to #PSA_KEY_ID_VENDOR_MAX. + * - 0 is reserved as an invalid key identifier. + * - Key identifiers outside these ranges are reserved for future use. + * + * \note Values of this type are encoded in the persistent key store. + * Any changes to how values are allocated must require careful + * consideration to allow backward compatibility. + */ +typedef uint32_t psa_key_id_t; + +/** Encoding of key identifiers as seen inside the PSA Crypto implementation. + * + * When PSA Crypto is built as a library inside an application, this type + * is identical to #psa_key_id_t. When PSA Crypto is built as a service + * that can store keys on behalf of multiple clients, this type + * encodes the #psa_key_id_t value seen by each client application as + * well as extra information that identifies the client that owns + * the key. + * + * \note Values of this type are encoded in the persistent key store. + * Any changes to existing values will require bumping the storage + * format version and providing a translation when reading the old + * format. + */ +#if !defined(MBEDTLS_PSA_CRYPTO_KEY_ID_ENCODES_OWNER) +typedef psa_key_id_t mbedtls_svc_key_id_t; + +#else /* MBEDTLS_PSA_CRYPTO_KEY_ID_ENCODES_OWNER */ +/* Define the MBEDTLS_PRIVATE macro. */ +#include "mbedtls/private_access.h" +/* Implementation-specific: The Mbed Cryptography library can be built as + * part of a multi-client service that exposes the PSA Cryptography API in each + * client and encodes the client identity in the key identifier argument of + * functions such as psa_open_key(). + */ +typedef struct { + psa_key_id_t MBEDTLS_PRIVATE(key_id); + mbedtls_key_owner_id_t MBEDTLS_PRIVATE(owner); +} mbedtls_svc_key_id_t; + +#endif /* !MBEDTLS_PSA_CRYPTO_KEY_ID_ENCODES_OWNER */ + +/**@}*/ + +/** \defgroup policy Key policies + * @{ + */ + +/** \brief Encoding of permitted usage on a key. + * + * Values of this type are generally constructed as bitwise-ors of macros + * called `PSA_KEY_USAGE_xxx`. + * + * \note Values of this type are encoded in the persistent key store. + * Any changes to existing values will require bumping the storage + * format version and providing a translation when reading the old + * format. + */ +typedef uint32_t psa_key_usage_t; + +/**@}*/ + +/** \defgroup attributes Key attributes + * @{ + */ + +/** The type of a structure containing key attributes. + * + * This is an opaque structure that can represent the metadata of a key + * object. Metadata that can be stored in attributes includes: + * - The location of the key in storage, indicated by its key identifier + * and its lifetime. + * - The key's policy, comprising usage flags and a specification of + * the permitted algorithm(s). + * - Information about the key itself: the key type and its size. + * - Additional implementation-defined attributes. + * + * The actual key material is not considered an attribute of a key. + * Key attributes do not contain information that is generally considered + * highly confidential. + * + * An attribute structure works like a simple data structure where each function + * `psa_set_key_xxx` sets a field and the corresponding function + * `psa_get_key_xxx` retrieves the value of the corresponding field. + * However, a future version of the library may report values that are + * equivalent to the original one, but have a different encoding. Invalid + * values may be mapped to different, also invalid values. + * + * An attribute structure may contain references to auxiliary resources, + * for example pointers to allocated memory or indirect references to + * pre-calculated values. In order to free such resources, the application + * must call psa_reset_key_attributes(). As an exception, calling + * psa_reset_key_attributes() on an attribute structure is optional if + * the structure has only been modified by the following functions + * since it was initialized or last reset with psa_reset_key_attributes(): + * - psa_set_key_id() + * - psa_set_key_lifetime() + * - psa_set_key_type() + * - psa_set_key_bits() + * - psa_set_key_usage_flags() + * - psa_set_key_algorithm() + * + * Before calling any function on a key attribute structure, the application + * must initialize it by any of the following means: + * - Set the structure to all-bits-zero, for example: + * \code + * psa_key_attributes_t attributes; + * memset(&attributes, 0, sizeof(attributes)); + * \endcode + * - Initialize the structure to logical zero values, for example: + * \code + * psa_key_attributes_t attributes = {0}; + * \endcode + * - Initialize the structure to the initializer #PSA_KEY_ATTRIBUTES_INIT, + * for example: + * \code + * psa_key_attributes_t attributes = PSA_KEY_ATTRIBUTES_INIT; + * \endcode + * - Assign the result of the function psa_key_attributes_init() + * to the structure, for example: + * \code + * psa_key_attributes_t attributes; + * attributes = psa_key_attributes_init(); + * \endcode + * + * A freshly initialized attribute structure contains the following + * values: + * + * - lifetime: #PSA_KEY_LIFETIME_VOLATILE. + * - key identifier: 0 (which is not a valid key identifier). + * - type: \c 0 (meaning that the type is unspecified). + * - key size: \c 0 (meaning that the size is unspecified). + * - usage flags: \c 0 (which allows no usage except exporting a public key). + * - algorithm: \c 0 (which allows no cryptographic usage, but allows + * exporting). + * + * A typical sequence to create a key is as follows: + * -# Create and initialize an attribute structure. + * -# If the key is persistent, call psa_set_key_id(). + * Also call psa_set_key_lifetime() to place the key in a non-default + * location. + * -# Set the key policy with psa_set_key_usage_flags() and + * psa_set_key_algorithm(). + * -# Set the key type with psa_set_key_type(). + * Skip this step if copying an existing key with psa_copy_key(). + * -# When generating a random key with psa_generate_key() or deriving a key + * with psa_key_derivation_output_key(), set the desired key size with + * psa_set_key_bits(). + * -# Call a key creation function: psa_import_key(), psa_generate_key(), + * psa_key_derivation_output_key() or psa_copy_key(). This function reads + * the attribute structure, creates a key with these attributes, and + * outputs a key identifier to the newly created key. + * -# The attribute structure is now no longer necessary. + * You may call psa_reset_key_attributes(), although this is optional + * with the workflow presented here because the attributes currently + * defined in this specification do not require any additional resources + * beyond the structure itself. + * + * A typical sequence to query a key's attributes is as follows: + * -# Call psa_get_key_attributes(). + * -# Call `psa_get_key_xxx` functions to retrieve the attribute(s) that + * you are interested in. + * -# Call psa_reset_key_attributes() to free any resources that may be + * used by the attribute structure. + * + * Once a key has been created, it is impossible to change its attributes. + */ +typedef struct psa_key_attributes_s psa_key_attributes_t; + + +#ifndef __DOXYGEN_ONLY__ +#if defined(MBEDTLS_PSA_CRYPTO_SE_C) +/* Mbed TLS defines this type in crypto_types.h because it is also + * visible to applications through an implementation-specific extension. + * For the PSA Cryptography specification, this type is only visible + * via crypto_se_driver.h. + */ +typedef uint64_t psa_key_slot_number_t; +#endif /* MBEDTLS_PSA_CRYPTO_SE_C */ +#endif /* !__DOXYGEN_ONLY__ */ + +/**@}*/ + +/** \defgroup derivation Key derivation + * @{ + */ + +/** \brief Encoding of the step of a key derivation. + * + * Values of this type are generally constructed by macros called + * `PSA_KEY_DERIVATION_INPUT_xxx`. + */ +typedef uint16_t psa_key_derivation_step_t; + +/**@}*/ + +/** The type of the data structure for PAKE cipher suites. + * + * This is an implementation-defined \c struct. Applications should not + * make any assumptions about the content of this structure. + * Implementation details can change in future versions without notice. + */ +typedef struct psa_pake_cipher_suite_s psa_pake_cipher_suite_t; + +/** Encoding of the type of the PAKE's primitive. +* +* Values defined by this standard will never be in the range 0x80-0xff. +* Vendors who define additional types must use an encoding in this range. +* +* For more information see the documentation of individual +* \c PSA_PAKE_PRIMITIVE_TYPE_XXX constants. +*/ +typedef uint8_t psa_pake_primitive_type_t; + +/** \brief Encoding of the family of the primitive associated with the PAKE. +* +* For more information see the documentation of individual +* \c PSA_PAKE_PRIMITIVE_TYPE_XXX constants. +*/ +typedef uint8_t psa_pake_family_t; + +/** \brief Encoding of the primitive associated with the PAKE. +* +* For more information see the documentation of the #PSA_PAKE_PRIMITIVE macro. +*/ +typedef uint32_t psa_pake_primitive_t; + +/** \brief Encoding of the application role of PAKE + * + * Encodes the application's role in the algorithm being executed. For more + * information see the documentation of individual \c PSA_PAKE_ROLE_XXX + * constants. + */ +typedef uint8_t psa_pake_role_t; + +/** Encoding of input and output indicators for PAKE. + * + * Some PAKE algorithms need to exchange more data than just a single key share. + * This type is for encoding additional input and output data for such + * algorithms. + */ +typedef uint8_t psa_pake_step_t; + +#endif /* PSA_CRYPTO_TYPES_H */ diff --git a/nrfdemo/build/tfm/api_ns/interface/include/psa/crypto_values.h b/nrfdemo/build/tfm/api_ns/interface/include/psa/crypto_values.h new file mode 100644 index 0000000..a2b21ae --- /dev/null +++ b/nrfdemo/build/tfm/api_ns/interface/include/psa/crypto_values.h @@ -0,0 +1,2793 @@ +/* + * Copyright (c) 2018-2023, Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: BSD-3-Clause + * + */ +/** + * \file psa/crypto_values.h + * + * \brief PSA cryptography module: macros to build and analyze integer values. + * + * \note This file may not be included directly. Applications must + * include psa/crypto.h. Drivers must include the appropriate driver + * header file. + * + * This file contains portable definitions of macros to build and analyze + * values of integral types that encode properties of cryptographic keys, + * designations of cryptographic algorithms, and error codes returned by + * the library. + * + * Note that many of the constants defined in this file are embedded in + * the persistent key store, as part of key metadata (including usage + * policies). As a consequence, they must not be changed (unless the storage + * format version changes). + * + * This header file only defines preprocessor macros. + */ + +#ifndef PSA_CRYPTO_VALUES_H +#define PSA_CRYPTO_VALUES_H + +/** \defgroup error Error codes + * @{ + */ + +/* PSA error codes */ + +/* Error codes are standardized across PSA domains (framework, crypto, storage, + * etc.). Do not change the values in this section or even the expansions + * of each macro: it must be possible to `#include` both this header + * and some other PSA component's headers in the same C source, + * which will lead to duplicate definitions of the `PSA_SUCCESS` and + * `PSA_ERROR_xxx` macros, which is ok if and only if the macros expand + * to the same sequence of tokens. + * + * If you must add a new + * value, check with the Arm PSA framework group to pick one that other + * domains aren't already using. */ + +/* Tell uncrustify not to touch the constant definitions, otherwise + * it might change the spacing to something that is not PSA-compliant + * (e.g. adding a space after casts). + * + * *INDENT-OFF* + */ + +/** The action was completed successfully. */ +#ifndef PSA_SUCCESS +#define PSA_SUCCESS ((psa_status_t)0) +#endif + +/** An error occurred that does not correspond to any defined + * failure cause. + * + * Implementations may use this error code if none of the other standard + * error codes are applicable. */ +#define PSA_ERROR_GENERIC_ERROR ((psa_status_t)-132) + +/** The requested operation or a parameter is not supported + * by this implementation. + * + * Implementations should return this error code when an enumeration + * parameter such as a key type, algorithm, etc. is not recognized. + * If a combination of parameters is recognized and identified as + * not valid, return #PSA_ERROR_INVALID_ARGUMENT instead. */ +#define PSA_ERROR_NOT_SUPPORTED ((psa_status_t)-134) + +/** The requested action is denied by a policy. + * + * Implementations should return this error code when the parameters + * are recognized as valid and supported, and a policy explicitly + * denies the requested operation. + * + * If a subset of the parameters of a function call identify a + * forbidden operation, and another subset of the parameters are + * not valid or not supported, it is unspecified whether the function + * returns #PSA_ERROR_NOT_PERMITTED, #PSA_ERROR_NOT_SUPPORTED or + * #PSA_ERROR_INVALID_ARGUMENT. */ +#define PSA_ERROR_NOT_PERMITTED ((psa_status_t)-133) + +/** An output buffer is too small. + * + * Applications can call the \c PSA_xxx_SIZE macro listed in the function + * description to determine a sufficient buffer size. + * + * Implementations should preferably return this error code only + * in cases when performing the operation with a larger output + * buffer would succeed. However implementations may return this + * error if a function has invalid or unsupported parameters in addition + * to the parameters that determine the necessary output buffer size. */ +#define PSA_ERROR_BUFFER_TOO_SMALL ((psa_status_t)-138) + +/** Asking for an item that already exists + * + * Implementations should return this error, when attempting + * to write an item (like a key) that already exists. */ +#define PSA_ERROR_ALREADY_EXISTS ((psa_status_t)-139) + +/** Asking for an item that doesn't exist + * + * Implementations should return this error, if a requested item (like + * a key) does not exist. */ +#define PSA_ERROR_DOES_NOT_EXIST ((psa_status_t)-140) + +/** The requested action cannot be performed in the current state. + * + * Multipart operations return this error when one of the + * functions is called out of sequence. Refer to the function + * descriptions for permitted sequencing of functions. + * + * Implementations shall not return this error code to indicate + * that a key either exists or not, + * but shall instead return #PSA_ERROR_ALREADY_EXISTS or #PSA_ERROR_DOES_NOT_EXIST + * as applicable. + * + * Implementations shall not return this error code to indicate that a + * key identifier is invalid, but shall return #PSA_ERROR_INVALID_HANDLE + * instead. */ +#define PSA_ERROR_BAD_STATE ((psa_status_t)-137) + +/** The parameters passed to the function are invalid. + * + * Implementations may return this error any time a parameter or + * combination of parameters are recognized as invalid. + * + * Implementations shall not return this error code to indicate that a + * key identifier is invalid, but shall return #PSA_ERROR_INVALID_HANDLE + * instead. + */ +#define PSA_ERROR_INVALID_ARGUMENT ((psa_status_t)-135) + +/** There is not enough runtime memory. + * + * If the action is carried out across multiple security realms, this + * error can refer to available memory in any of the security realms. */ +#define PSA_ERROR_INSUFFICIENT_MEMORY ((psa_status_t)-141) + +/** There is not enough persistent storage. + * + * Functions that modify the key storage return this error code if + * there is insufficient storage space on the host media. In addition, + * many functions that do not otherwise access storage may return this + * error code if the implementation requires a mandatory log entry for + * the requested action and the log storage space is full. */ +#define PSA_ERROR_INSUFFICIENT_STORAGE ((psa_status_t)-142) + +/** There was a communication failure inside the implementation. + * + * This can indicate a communication failure between the application + * and an external cryptoprocessor or between the cryptoprocessor and + * an external volatile or persistent memory. A communication failure + * may be transient or permanent depending on the cause. + * + * \warning If a function returns this error, it is undetermined + * whether the requested action has completed or not. Implementations + * should return #PSA_SUCCESS on successful completion whenever + * possible, however functions may return #PSA_ERROR_COMMUNICATION_FAILURE + * if the requested action was completed successfully in an external + * cryptoprocessor but there was a breakdown of communication before + * the cryptoprocessor could report the status to the application. + */ +#define PSA_ERROR_COMMUNICATION_FAILURE ((psa_status_t)-145) + +/** There was a storage failure that may have led to data loss. + * + * This error indicates that some persistent storage is corrupted. + * It should not be used for a corruption of volatile memory + * (use #PSA_ERROR_CORRUPTION_DETECTED), for a communication error + * between the cryptoprocessor and its external storage (use + * #PSA_ERROR_COMMUNICATION_FAILURE), or when the storage is + * in a valid state but is full (use #PSA_ERROR_INSUFFICIENT_STORAGE). + * + * Note that a storage failure does not indicate that any data that was + * previously read is invalid. However this previously read data may no + * longer be readable from storage. + * + * When a storage failure occurs, it is no longer possible to ensure + * the global integrity of the keystore. Depending on the global + * integrity guarantees offered by the implementation, access to other + * data may or may not fail even if the data is still readable but + * its integrity cannot be guaranteed. + * + * Implementations should only use this error code to report a + * permanent storage corruption. However application writers should + * keep in mind that transient errors while reading the storage may be + * reported using this error code. */ +#define PSA_ERROR_STORAGE_FAILURE ((psa_status_t)-146) + +/** A hardware failure was detected. + * + * A hardware failure may be transient or permanent depending on the + * cause. */ +#define PSA_ERROR_HARDWARE_FAILURE ((psa_status_t)-147) + +/** A tampering attempt was detected. + * + * If an application receives this error code, there is no guarantee + * that previously accessed or computed data was correct and remains + * confidential. Applications should not perform any security function + * and should enter a safe failure state. + * + * Implementations may return this error code if they detect an invalid + * state that cannot happen during normal operation and that indicates + * that the implementation's security guarantees no longer hold. Depending + * on the implementation architecture and on its security and safety goals, + * the implementation may forcibly terminate the application. + * + * This error code is intended as a last resort when a security breach + * is detected and it is unsure whether the keystore data is still + * protected. Implementations shall only return this error code + * to report an alarm from a tampering detector, to indicate that + * the confidentiality of stored data can no longer be guaranteed, + * or to indicate that the integrity of previously returned data is now + * considered compromised. Implementations shall not use this error code + * to indicate a hardware failure that merely makes it impossible to + * perform the requested operation (use #PSA_ERROR_COMMUNICATION_FAILURE, + * #PSA_ERROR_STORAGE_FAILURE, #PSA_ERROR_HARDWARE_FAILURE, + * #PSA_ERROR_INSUFFICIENT_ENTROPY or other applicable error code + * instead). + * + * This error indicates an attack against the application. Implementations + * shall not return this error code as a consequence of the behavior of + * the application itself. */ +#define PSA_ERROR_CORRUPTION_DETECTED ((psa_status_t)-151) + +/** There is not enough entropy to generate random data needed + * for the requested action. + * + * This error indicates a failure of a hardware random generator. + * Application writers should note that this error can be returned not + * only by functions whose purpose is to generate random data, such + * as key, IV or nonce generation, but also by functions that execute + * an algorithm with a randomized result, as well as functions that + * use randomization of intermediate computations as a countermeasure + * to certain attacks. + * + * Implementations should avoid returning this error after psa_crypto_init() + * has succeeded. Implementations should generate sufficient + * entropy during initialization and subsequently use a cryptographically + * secure pseudorandom generator (PRNG). However implementations may return + * this error at any time if a policy requires the PRNG to be reseeded + * during normal operation. */ +#define PSA_ERROR_INSUFFICIENT_ENTROPY ((psa_status_t)-148) + +/** The signature, MAC or hash is incorrect. + * + * Verification functions return this error if the verification + * calculations completed successfully, and the value to be verified + * was determined to be incorrect. + * + * If the value to verify has an invalid size, implementations may return + * either #PSA_ERROR_INVALID_ARGUMENT or #PSA_ERROR_INVALID_SIGNATURE. */ +#define PSA_ERROR_INVALID_SIGNATURE ((psa_status_t)-149) + +/** The decrypted padding is incorrect. + * + * \warning In some protocols, when decrypting data, it is essential that + * the behavior of the application does not depend on whether the padding + * is correct, down to precise timing. Applications should prefer + * protocols that use authenticated encryption rather than plain + * encryption. If the application must perform a decryption of + * unauthenticated data, the application writer should take care not + * to reveal whether the padding is invalid. + * + * Implementations should strive to make valid and invalid padding + * as close as possible to indistinguishable to an external observer. + * In particular, the timing of a decryption operation should not + * depend on the validity of the padding. */ +#define PSA_ERROR_INVALID_PADDING ((psa_status_t)-150) + +/** Return this error when there's insufficient data when attempting + * to read from a resource. */ +#define PSA_ERROR_INSUFFICIENT_DATA ((psa_status_t)-143) + +/** The key identifier is not valid. See also :ref:\`key-handles\`. + */ +#define PSA_ERROR_INVALID_HANDLE ((psa_status_t)-136) + +/** Stored data has been corrupted. + * + * This error indicates that some persistent storage has suffered corruption. + * It does not indicate the following situations, which have specific error + * codes: + * + * - A corruption of volatile memory - use #PSA_ERROR_CORRUPTION_DETECTED. + * - A communication error between the cryptoprocessor and its external + * storage - use #PSA_ERROR_COMMUNICATION_FAILURE. + * - When the storage is in a valid state but is full - use + * #PSA_ERROR_INSUFFICIENT_STORAGE. + * - When the storage fails for other reasons - use + * #PSA_ERROR_STORAGE_FAILURE. + * - When the stored data is not valid - use #PSA_ERROR_DATA_INVALID. + * + * \note A storage corruption does not indicate that any data that was + * previously read is invalid. However this previously read data might no + * longer be readable from storage. + * + * When a storage failure occurs, it is no longer possible to ensure the + * global integrity of the keystore. + */ +#define PSA_ERROR_DATA_CORRUPT ((psa_status_t)-152) + +/** Data read from storage is not valid for the implementation. + * + * This error indicates that some data read from storage does not have a valid + * format. It does not indicate the following situations, which have specific + * error codes: + * + * - When the storage or stored data is corrupted - use #PSA_ERROR_DATA_CORRUPT + * - When the storage fails for other reasons - use #PSA_ERROR_STORAGE_FAILURE + * - An invalid argument to the API - use #PSA_ERROR_INVALID_ARGUMENT + * + * This error is typically a result of either storage corruption on a + * cleartext storage backend, or an attempt to read data that was + * written by an incompatible version of the library. + */ +#define PSA_ERROR_DATA_INVALID ((psa_status_t)-153) + +/** The function that returns this status is defined as interruptible and + * still has work to do, thus the user should call the function again with the + * same operation context until it either returns #PSA_SUCCESS or any other + * error. This is not an error per se, more a notification of status. + */ +#define PSA_OPERATION_INCOMPLETE ((psa_status_t)-248) + +/* *INDENT-ON* */ + +/**@}*/ + +/** \defgroup crypto_types Key and algorithm types + * @{ + */ + +/* Note that key type values, including ECC family and DH group values, are + * embedded in the persistent key store, as part of key metadata. As a + * consequence, they must not be changed (unless the storage format version + * changes). + */ + +/** An invalid key type value. + * + * Zero is not the encoding of any key type. + */ +#define PSA_KEY_TYPE_NONE ((psa_key_type_t) 0x0000) + +/** Vendor-defined key type flag. + * + * Key types defined by this standard will never have the + * #PSA_KEY_TYPE_VENDOR_FLAG bit set. Vendors who define additional key types + * must use an encoding with the #PSA_KEY_TYPE_VENDOR_FLAG bit set and should + * respect the bitwise structure used by standard encodings whenever practical. + */ +#define PSA_KEY_TYPE_VENDOR_FLAG ((psa_key_type_t) 0x8000) + +#define PSA_KEY_TYPE_CATEGORY_MASK ((psa_key_type_t) 0x7000) +#define PSA_KEY_TYPE_CATEGORY_RAW ((psa_key_type_t) 0x1000) +#define PSA_KEY_TYPE_CATEGORY_SYMMETRIC ((psa_key_type_t) 0x2000) +#define PSA_KEY_TYPE_CATEGORY_PUBLIC_KEY ((psa_key_type_t) 0x4000) +#define PSA_KEY_TYPE_CATEGORY_KEY_PAIR ((psa_key_type_t) 0x7000) + +#define PSA_KEY_TYPE_CATEGORY_FLAG_PAIR ((psa_key_type_t) 0x3000) + +/** Whether a key type is vendor-defined. + * + * See also #PSA_KEY_TYPE_VENDOR_FLAG. + */ +#define PSA_KEY_TYPE_IS_VENDOR_DEFINED(type) \ + (((type) & PSA_KEY_TYPE_VENDOR_FLAG) != 0) + +/** Whether a key type is an unstructured array of bytes. + * + * This encompasses both symmetric keys and non-key data. + */ +#define PSA_KEY_TYPE_IS_UNSTRUCTURED(type) \ + (((type) & PSA_KEY_TYPE_CATEGORY_MASK) == PSA_KEY_TYPE_CATEGORY_RAW || \ + ((type) & PSA_KEY_TYPE_CATEGORY_MASK) == PSA_KEY_TYPE_CATEGORY_SYMMETRIC) + +/** Whether a key type is asymmetric: either a key pair or a public key. */ +#define PSA_KEY_TYPE_IS_ASYMMETRIC(type) \ + (((type) & PSA_KEY_TYPE_CATEGORY_MASK \ + & ~PSA_KEY_TYPE_CATEGORY_FLAG_PAIR) == \ + PSA_KEY_TYPE_CATEGORY_PUBLIC_KEY) +/** Whether a key type is the public part of a key pair. */ +#define PSA_KEY_TYPE_IS_PUBLIC_KEY(type) \ + (((type) & PSA_KEY_TYPE_CATEGORY_MASK) == PSA_KEY_TYPE_CATEGORY_PUBLIC_KEY) +/** Whether a key type is a key pair containing a private part and a public + * part. */ +#define PSA_KEY_TYPE_IS_KEY_PAIR(type) \ + (((type) & PSA_KEY_TYPE_CATEGORY_MASK) == PSA_KEY_TYPE_CATEGORY_KEY_PAIR) +/** The key pair type corresponding to a public key type. + * + * You may also pass a key pair type as \p type, it will be left unchanged. + * + * \param type A public key type or key pair type. + * + * \return The corresponding key pair type. + * If \p type is not a public key or a key pair, + * the return value is undefined. + */ +#define PSA_KEY_TYPE_KEY_PAIR_OF_PUBLIC_KEY(type) \ + ((type) | PSA_KEY_TYPE_CATEGORY_FLAG_PAIR) +/** The public key type corresponding to a key pair type. + * + * You may also pass a key pair type as \p type, it will be left unchanged. + * + * \param type A public key type or key pair type. + * + * \return The corresponding public key type. + * If \p type is not a public key or a key pair, + * the return value is undefined. + */ +#define PSA_KEY_TYPE_PUBLIC_KEY_OF_KEY_PAIR(type) \ + ((type) & ~PSA_KEY_TYPE_CATEGORY_FLAG_PAIR) + +/** Raw data. + * + * A "key" of this type cannot be used for any cryptographic operation. + * Applications may use this type to store arbitrary data in the keystore. */ +#define PSA_KEY_TYPE_RAW_DATA ((psa_key_type_t) 0x1001) + +/** HMAC key. + * + * The key policy determines which underlying hash algorithm the key can be + * used for. + * + * HMAC keys should generally have the same size as the underlying hash. + * This size can be calculated with #PSA_HASH_LENGTH(\c alg) where + * \c alg is the HMAC algorithm or the underlying hash algorithm. */ +#define PSA_KEY_TYPE_HMAC ((psa_key_type_t) 0x1100) + +/** A secret for key derivation. + * + * This key type is for high-entropy secrets only. For low-entropy secrets, + * #PSA_KEY_TYPE_PASSWORD should be used instead. + * + * These keys can be used as the #PSA_KEY_DERIVATION_INPUT_SECRET or + * #PSA_KEY_DERIVATION_INPUT_PASSWORD input of key derivation algorithms. + * + * The key policy determines which key derivation algorithm the key + * can be used for. + */ +#define PSA_KEY_TYPE_DERIVE ((psa_key_type_t) 0x1200) + +/** A low-entropy secret for password hashing or key derivation. + * + * This key type is suitable for passwords and passphrases which are typically + * intended to be memorizable by humans, and have a low entropy relative to + * their size. It can be used for randomly generated or derived keys with + * maximum or near-maximum entropy, but #PSA_KEY_TYPE_DERIVE is more suitable + * for such keys. It is not suitable for passwords with extremely low entropy, + * such as numerical PINs. + * + * These keys can be used as the #PSA_KEY_DERIVATION_INPUT_PASSWORD input of + * key derivation algorithms. Algorithms that accept such an input were + * designed to accept low-entropy secret and are known as password hashing or + * key stretching algorithms. + * + * These keys cannot be used as the #PSA_KEY_DERIVATION_INPUT_SECRET input of + * key derivation algorithms, as the algorithms that take such an input expect + * it to be high-entropy. + * + * The key policy determines which key derivation algorithm the key can be + * used for, among the permissible subset defined above. + */ +#define PSA_KEY_TYPE_PASSWORD ((psa_key_type_t) 0x1203) + +/** A secret value that can be used to verify a password hash. + * + * The key policy determines which key derivation algorithm the key + * can be used for, among the same permissible subset as for + * #PSA_KEY_TYPE_PASSWORD. + */ +#define PSA_KEY_TYPE_PASSWORD_HASH ((psa_key_type_t) 0x1205) + +/** A secret value that can be used in when computing a password hash. + * + * The key policy determines which key derivation algorithm the key + * can be used for, among the subset of algorithms that can use pepper. + */ +#define PSA_KEY_TYPE_PEPPER ((psa_key_type_t) 0x1206) + +/** Key for a cipher, AEAD or MAC algorithm based on the AES block cipher. + * + * The size of the key can be 16 bytes (AES-128), 24 bytes (AES-192) or + * 32 bytes (AES-256). + */ +#define PSA_KEY_TYPE_AES ((psa_key_type_t) 0x2400) + +/** Key for a cipher, AEAD or MAC algorithm based on the + * ARIA block cipher. */ +#define PSA_KEY_TYPE_ARIA ((psa_key_type_t) 0x2406) + +/** Key for a cipher or MAC algorithm based on DES or 3DES (Triple-DES). + * + * The size of the key can be 64 bits (single DES), 128 bits (2-key 3DES) or + * 192 bits (3-key 3DES). + * + * Note that single DES and 2-key 3DES are weak and strongly + * deprecated and should only be used to decrypt legacy data. 3-key 3DES + * is weak and deprecated and should only be used in legacy protocols. + */ +#define PSA_KEY_TYPE_DES ((psa_key_type_t) 0x2301) + +/** Key for a cipher, AEAD or MAC algorithm based on the + * Camellia block cipher. */ +#define PSA_KEY_TYPE_CAMELLIA ((psa_key_type_t) 0x2403) + +/** Key for the ChaCha20 stream cipher or the Chacha20-Poly1305 AEAD algorithm. + * + * ChaCha20 and the ChaCha20_Poly1305 construction are defined in RFC 7539. + * + * \note For ChaCha20 and ChaCha20_Poly1305, Mbed TLS only supports + * 12-byte nonces. + * + * \note For ChaCha20, the initial counter value is 0. To encrypt or decrypt + * with the initial counter value 1, you can process and discard a + * 64-byte block before the real data. + */ +#define PSA_KEY_TYPE_CHACHA20 ((psa_key_type_t) 0x2004) + +/** RSA public key. + * + * The size of an RSA key is the bit size of the modulus. + */ +#define PSA_KEY_TYPE_RSA_PUBLIC_KEY ((psa_key_type_t) 0x4001) +/** RSA key pair (private and public key). + * + * The size of an RSA key is the bit size of the modulus. + */ +#define PSA_KEY_TYPE_RSA_KEY_PAIR ((psa_key_type_t) 0x7001) +/** Whether a key type is an RSA key (pair or public-only). */ +#define PSA_KEY_TYPE_IS_RSA(type) \ + (PSA_KEY_TYPE_PUBLIC_KEY_OF_KEY_PAIR(type) == PSA_KEY_TYPE_RSA_PUBLIC_KEY) + +#define PSA_KEY_TYPE_ECC_PUBLIC_KEY_BASE ((psa_key_type_t) 0x4100) +#define PSA_KEY_TYPE_ECC_KEY_PAIR_BASE ((psa_key_type_t) 0x7100) +#define PSA_KEY_TYPE_ECC_CURVE_MASK ((psa_key_type_t) 0x00ff) +/** Elliptic curve key pair. + * + * The size of an elliptic curve key is the bit size associated with the curve, + * i.e. the bit size of *q* for a curve over a field *F<sub>q</sub>*. + * See the documentation of `PSA_ECC_FAMILY_xxx` curve families for details. + * + * \param curve A value of type ::psa_ecc_family_t that + * identifies the ECC curve to be used. + */ +#define PSA_KEY_TYPE_ECC_KEY_PAIR(curve) \ + (PSA_KEY_TYPE_ECC_KEY_PAIR_BASE | (curve)) +/** Elliptic curve public key. + * + * The size of an elliptic curve public key is the same as the corresponding + * private key (see #PSA_KEY_TYPE_ECC_KEY_PAIR and the documentation of + * `PSA_ECC_FAMILY_xxx` curve families). + * + * \param curve A value of type ::psa_ecc_family_t that + * identifies the ECC curve to be used. + */ +#define PSA_KEY_TYPE_ECC_PUBLIC_KEY(curve) \ + (PSA_KEY_TYPE_ECC_PUBLIC_KEY_BASE | (curve)) + +/** Whether a key type is an elliptic curve key (pair or public-only). */ +#define PSA_KEY_TYPE_IS_ECC(type) \ + ((PSA_KEY_TYPE_PUBLIC_KEY_OF_KEY_PAIR(type) & \ + ~PSA_KEY_TYPE_ECC_CURVE_MASK) == PSA_KEY_TYPE_ECC_PUBLIC_KEY_BASE) +/** Whether a key type is an elliptic curve key pair. */ +#define PSA_KEY_TYPE_IS_ECC_KEY_PAIR(type) \ + (((type) & ~PSA_KEY_TYPE_ECC_CURVE_MASK) == \ + PSA_KEY_TYPE_ECC_KEY_PAIR_BASE) +/** Whether a key type is an elliptic curve public key. */ +#define PSA_KEY_TYPE_IS_ECC_PUBLIC_KEY(type) \ + (((type) & ~PSA_KEY_TYPE_ECC_CURVE_MASK) == \ + PSA_KEY_TYPE_ECC_PUBLIC_KEY_BASE) + +/** Extract the curve from an elliptic curve key type. */ +#define PSA_KEY_TYPE_ECC_GET_FAMILY(type) \ + ((psa_ecc_family_t) (PSA_KEY_TYPE_IS_ECC(type) ? \ + ((type) & PSA_KEY_TYPE_ECC_CURVE_MASK) : \ + 0)) + +/** Check if the curve of given family is Weierstrass elliptic curve. */ +#define PSA_ECC_FAMILY_IS_WEIERSTRASS(family) ((family & 0xc0) == 0) + +/** SEC Koblitz curves over prime fields. + * + * This family comprises the following curves: + * secp192k1, secp224k1, secp256k1. + * They are defined in _Standards for Efficient Cryptography_, + * _SEC 2: Recommended Elliptic Curve Domain Parameters_. + * https://www.secg.org/sec2-v2.pdf + */ +#define PSA_ECC_FAMILY_SECP_K1 ((psa_ecc_family_t) 0x17) + +/** SEC random curves over prime fields. + * + * This family comprises the following curves: + * secp192k1, secp224r1, secp256r1, secp384r1, secp521r1. + * They are defined in _Standards for Efficient Cryptography_, + * _SEC 2: Recommended Elliptic Curve Domain Parameters_. + * https://www.secg.org/sec2-v2.pdf + */ +#define PSA_ECC_FAMILY_SECP_R1 ((psa_ecc_family_t) 0x12) +/* SECP160R2 (SEC2 v1, obsolete) */ +#define PSA_ECC_FAMILY_SECP_R2 ((psa_ecc_family_t) 0x1b) + +/** SEC Koblitz curves over binary fields. + * + * This family comprises the following curves: + * sect163k1, sect233k1, sect239k1, sect283k1, sect409k1, sect571k1. + * They are defined in _Standards for Efficient Cryptography_, + * _SEC 2: Recommended Elliptic Curve Domain Parameters_. + * https://www.secg.org/sec2-v2.pdf + */ +#define PSA_ECC_FAMILY_SECT_K1 ((psa_ecc_family_t) 0x27) + +/** SEC random curves over binary fields. + * + * This family comprises the following curves: + * sect163r1, sect233r1, sect283r1, sect409r1, sect571r1. + * They are defined in _Standards for Efficient Cryptography_, + * _SEC 2: Recommended Elliptic Curve Domain Parameters_. + * https://www.secg.org/sec2-v2.pdf + */ +#define PSA_ECC_FAMILY_SECT_R1 ((psa_ecc_family_t) 0x22) + +/** SEC additional random curves over binary fields. + * + * This family comprises the following curve: + * sect163r2. + * It is defined in _Standards for Efficient Cryptography_, + * _SEC 2: Recommended Elliptic Curve Domain Parameters_. + * https://www.secg.org/sec2-v2.pdf + */ +#define PSA_ECC_FAMILY_SECT_R2 ((psa_ecc_family_t) 0x2b) + +/** Brainpool P random curves. + * + * This family comprises the following curves: + * brainpoolP160r1, brainpoolP192r1, brainpoolP224r1, brainpoolP256r1, + * brainpoolP320r1, brainpoolP384r1, brainpoolP512r1. + * It is defined in RFC 5639. + */ +#define PSA_ECC_FAMILY_BRAINPOOL_P_R1 ((psa_ecc_family_t) 0x30) + +/** Curve25519 and Curve448. + * + * This family comprises the following Montgomery curves: + * - 255-bit: Bernstein et al., + * _Curve25519: new Diffie-Hellman speed records_, LNCS 3958, 2006. + * The algorithm #PSA_ALG_ECDH performs X25519 when used with this curve. + * - 448-bit: Hamburg, + * _Ed448-Goldilocks, a new elliptic curve_, NIST ECC Workshop, 2015. + * The algorithm #PSA_ALG_ECDH performs X448 when used with this curve. + */ +#define PSA_ECC_FAMILY_MONTGOMERY ((psa_ecc_family_t) 0x41) + +/** The twisted Edwards curves Ed25519 and Ed448. + * + * These curves are suitable for EdDSA (#PSA_ALG_PURE_EDDSA for both curves, + * #PSA_ALG_ED25519PH for the 255-bit curve, + * #PSA_ALG_ED448PH for the 448-bit curve). + * + * This family comprises the following twisted Edwards curves: + * - 255-bit: Edwards25519, the twisted Edwards curve birationally equivalent + * to Curve25519. + * Bernstein et al., _Twisted Edwards curves_, Africacrypt 2008. + * - 448-bit: Edwards448, the twisted Edwards curve birationally equivalent + * to Curve448. + * Hamburg, _Ed448-Goldilocks, a new elliptic curve_, NIST ECC Workshop, 2015. + */ +#define PSA_ECC_FAMILY_TWISTED_EDWARDS ((psa_ecc_family_t) 0x42) + +#define PSA_KEY_TYPE_DH_PUBLIC_KEY_BASE ((psa_key_type_t) 0x4200) +#define PSA_KEY_TYPE_DH_KEY_PAIR_BASE ((psa_key_type_t) 0x7200) +#define PSA_KEY_TYPE_DH_GROUP_MASK ((psa_key_type_t) 0x00ff) +/** Diffie-Hellman key pair. + * + * \param group A value of type ::psa_dh_family_t that identifies the + * Diffie-Hellman group to be used. + */ +#define PSA_KEY_TYPE_DH_KEY_PAIR(group) \ + (PSA_KEY_TYPE_DH_KEY_PAIR_BASE | (group)) +/** Diffie-Hellman public key. + * + * \param group A value of type ::psa_dh_family_t that identifies the + * Diffie-Hellman group to be used. + */ +#define PSA_KEY_TYPE_DH_PUBLIC_KEY(group) \ + (PSA_KEY_TYPE_DH_PUBLIC_KEY_BASE | (group)) + +/** Whether a key type is a Diffie-Hellman key (pair or public-only). */ +#define PSA_KEY_TYPE_IS_DH(type) \ + ((PSA_KEY_TYPE_PUBLIC_KEY_OF_KEY_PAIR(type) & \ + ~PSA_KEY_TYPE_DH_GROUP_MASK) == PSA_KEY_TYPE_DH_PUBLIC_KEY_BASE) +/** Whether a key type is a Diffie-Hellman key pair. */ +#define PSA_KEY_TYPE_IS_DH_KEY_PAIR(type) \ + (((type) & ~PSA_KEY_TYPE_DH_GROUP_MASK) == \ + PSA_KEY_TYPE_DH_KEY_PAIR_BASE) +/** Whether a key type is a Diffie-Hellman public key. */ +#define PSA_KEY_TYPE_IS_DH_PUBLIC_KEY(type) \ + (((type) & ~PSA_KEY_TYPE_DH_GROUP_MASK) == \ + PSA_KEY_TYPE_DH_PUBLIC_KEY_BASE) + +/** Extract the group from a Diffie-Hellman key type. */ +#define PSA_KEY_TYPE_DH_GET_FAMILY(type) \ + ((psa_dh_family_t) (PSA_KEY_TYPE_IS_DH(type) ? \ + ((type) & PSA_KEY_TYPE_DH_GROUP_MASK) : \ + 0)) + +/** Diffie-Hellman groups defined in RFC 7919 Appendix A. + * + * This family includes groups with the following key sizes (in bits): + * 2048, 3072, 4096, 6144, 8192. A given implementation may support + * all of these sizes or only a subset. + */ +#define PSA_DH_FAMILY_RFC7919 ((psa_dh_family_t) 0x03) + +/** Diffie-Hellman groups defined in RFC 3526. + * + * This family includes groups with the following key sizes (in bits): + * 1536, 2048, 3072, 4096, 6144, 8192. A given implementation may support + * all of these sizes or only a subset. + */ +#define PSA_DH_FAMILY_RFC3526 ((psa_dh_family_t) 0x05) /*!!OM*/ + +#define PSA_GET_KEY_TYPE_BLOCK_SIZE_EXPONENT(type) \ + (((type) >> 8) & 7) +/** The block size of a block cipher. + * + * \param type A cipher key type (value of type #psa_key_type_t). + * + * \return The block size for a block cipher, or 1 for a stream cipher. + * The return value is undefined if \p type is not a supported + * cipher key type. + * + * \note It is possible to build stream cipher algorithms on top of a block + * cipher, for example CTR mode (#PSA_ALG_CTR). + * This macro only takes the key type into account, so it cannot be + * used to determine the size of the data that #psa_cipher_update() + * might buffer for future processing in general. + * + * \note This macro returns a compile-time constant if its argument is one. + * + * \warning This macro may evaluate its argument multiple times. + */ +#define PSA_BLOCK_CIPHER_BLOCK_LENGTH(type) \ + (((type) & PSA_KEY_TYPE_CATEGORY_MASK) == PSA_KEY_TYPE_CATEGORY_SYMMETRIC ? \ + 1u << PSA_GET_KEY_TYPE_BLOCK_SIZE_EXPONENT(type) : \ + 0u) + +/* Note that algorithm values are embedded in the persistent key store, + * as part of key metadata. As a consequence, they must not be changed + * (unless the storage format version changes). + */ + +/** Vendor-defined algorithm flag. + * + * Algorithms defined by this standard will never have the #PSA_ALG_VENDOR_FLAG + * bit set. Vendors who define additional algorithms must use an encoding with + * the #PSA_ALG_VENDOR_FLAG bit set and should respect the bitwise structure + * used by standard encodings whenever practical. + */ +#define PSA_ALG_VENDOR_FLAG ((psa_algorithm_t) 0x80000000) + +#define PSA_ALG_CATEGORY_MASK ((psa_algorithm_t) 0x7f000000) +#define PSA_ALG_CATEGORY_HASH ((psa_algorithm_t) 0x02000000) +#define PSA_ALG_CATEGORY_MAC ((psa_algorithm_t) 0x03000000) +#define PSA_ALG_CATEGORY_CIPHER ((psa_algorithm_t) 0x04000000) +#define PSA_ALG_CATEGORY_AEAD ((psa_algorithm_t) 0x05000000) +#define PSA_ALG_CATEGORY_SIGN ((psa_algorithm_t) 0x06000000) +#define PSA_ALG_CATEGORY_ASYMMETRIC_ENCRYPTION ((psa_algorithm_t) 0x07000000) +#define PSA_ALG_CATEGORY_KEY_DERIVATION ((psa_algorithm_t) 0x08000000) +#define PSA_ALG_CATEGORY_KEY_AGREEMENT ((psa_algorithm_t) 0x09000000) + +/** Whether an algorithm is vendor-defined. + * + * See also #PSA_ALG_VENDOR_FLAG. + */ +#define PSA_ALG_IS_VENDOR_DEFINED(alg) \ + (((alg) & PSA_ALG_VENDOR_FLAG) != 0) + +/** Whether the specified algorithm is a hash algorithm. + * + * \param alg An algorithm identifier (value of type #psa_algorithm_t). + * + * \return 1 if \p alg is a hash algorithm, 0 otherwise. + * This macro may return either 0 or 1 if \p alg is not a supported + * algorithm identifier. + */ +#define PSA_ALG_IS_HASH(alg) \ + (((alg) & PSA_ALG_CATEGORY_MASK) == PSA_ALG_CATEGORY_HASH) + +/** Whether the specified algorithm is a MAC algorithm. + * + * \param alg An algorithm identifier (value of type #psa_algorithm_t). + * + * \return 1 if \p alg is a MAC algorithm, 0 otherwise. + * This macro may return either 0 or 1 if \p alg is not a supported + * algorithm identifier. + */ +#define PSA_ALG_IS_MAC(alg) \ + (((alg) & PSA_ALG_CATEGORY_MASK) == PSA_ALG_CATEGORY_MAC) + +/** Whether the specified algorithm is a symmetric cipher algorithm. + * + * \param alg An algorithm identifier (value of type #psa_algorithm_t). + * + * \return 1 if \p alg is a symmetric cipher algorithm, 0 otherwise. + * This macro may return either 0 or 1 if \p alg is not a supported + * algorithm identifier. + */ +#define PSA_ALG_IS_CIPHER(alg) \ + (((alg) & PSA_ALG_CATEGORY_MASK) == PSA_ALG_CATEGORY_CIPHER) + +/** Whether the specified algorithm is an authenticated encryption + * with associated data (AEAD) algorithm. + * + * \param alg An algorithm identifier (value of type #psa_algorithm_t). + * + * \return 1 if \p alg is an AEAD algorithm, 0 otherwise. + * This macro may return either 0 or 1 if \p alg is not a supported + * algorithm identifier. + */ +#define PSA_ALG_IS_AEAD(alg) \ + (((alg) & PSA_ALG_CATEGORY_MASK) == PSA_ALG_CATEGORY_AEAD) + +/** Whether the specified algorithm is an asymmetric signature algorithm, + * also known as public-key signature algorithm. + * + * \param alg An algorithm identifier (value of type #psa_algorithm_t). + * + * \return 1 if \p alg is an asymmetric signature algorithm, 0 otherwise. + * This macro may return either 0 or 1 if \p alg is not a supported + * algorithm identifier. + */ +#define PSA_ALG_IS_SIGN(alg) \ + (((alg) & PSA_ALG_CATEGORY_MASK) == PSA_ALG_CATEGORY_SIGN) + +/** Whether the specified algorithm is an asymmetric encryption algorithm, + * also known as public-key encryption algorithm. + * + * \param alg An algorithm identifier (value of type #psa_algorithm_t). + * + * \return 1 if \p alg is an asymmetric encryption algorithm, 0 otherwise. + * This macro may return either 0 or 1 if \p alg is not a supported + * algorithm identifier. + */ +#define PSA_ALG_IS_ASYMMETRIC_ENCRYPTION(alg) \ + (((alg) & PSA_ALG_CATEGORY_MASK) == PSA_ALG_CATEGORY_ASYMMETRIC_ENCRYPTION) + +/** Whether the specified algorithm is a key agreement algorithm. + * + * \param alg An algorithm identifier (value of type #psa_algorithm_t). + * + * \return 1 if \p alg is a key agreement algorithm, 0 otherwise. + * This macro may return either 0 or 1 if \p alg is not a supported + * algorithm identifier. + */ +#define PSA_ALG_IS_KEY_AGREEMENT(alg) \ + (((alg) & PSA_ALG_CATEGORY_MASK) == PSA_ALG_CATEGORY_KEY_AGREEMENT) + +/** Whether the specified algorithm is a key derivation algorithm. + * + * \param alg An algorithm identifier (value of type #psa_algorithm_t). + * + * \return 1 if \p alg is a key derivation algorithm, 0 otherwise. + * This macro may return either 0 or 1 if \p alg is not a supported + * algorithm identifier. + */ +#define PSA_ALG_IS_KEY_DERIVATION(alg) \ + (((alg) & PSA_ALG_CATEGORY_MASK) == PSA_ALG_CATEGORY_KEY_DERIVATION) + +/** Whether the specified algorithm is a key stretching / password hashing + * algorithm. + * + * A key stretching / password hashing algorithm is a key derivation algorithm + * that is suitable for use with a low-entropy secret such as a password. + * Equivalently, it's a key derivation algorithm that uses a + * #PSA_KEY_DERIVATION_INPUT_PASSWORD input step. + * + * \param alg An algorithm identifier (value of type #psa_algorithm_t). + * + * \return 1 if \p alg is a key stretching / password hashing algorithm, 0 + * otherwise. This macro may return either 0 or 1 if \p alg is not a + * supported algorithm identifier. + */ +#define PSA_ALG_IS_KEY_DERIVATION_STRETCHING(alg) \ + (PSA_ALG_IS_KEY_DERIVATION(alg) && \ + (alg) & PSA_ALG_KEY_DERIVATION_STRETCHING_FLAG) + +/** An invalid algorithm identifier value. */ +/* *INDENT-OFF* (https://github.com/ARM-software/psa-arch-tests/issues/337) */ +#define PSA_ALG_NONE ((psa_algorithm_t)0) +/* *INDENT-ON* */ + +#define PSA_ALG_HASH_MASK ((psa_algorithm_t) 0x000000ff) +/** MD5 */ +#define PSA_ALG_MD5 ((psa_algorithm_t) 0x02000003) +/** PSA_ALG_RIPEMD160 */ +#define PSA_ALG_RIPEMD160 ((psa_algorithm_t) 0x02000004) +/** SHA1 */ +#define PSA_ALG_SHA_1 ((psa_algorithm_t) 0x02000005) +/** SHA2-224 */ +#define PSA_ALG_SHA_224 ((psa_algorithm_t) 0x02000008) +/** SHA2-256 */ +#define PSA_ALG_SHA_256 ((psa_algorithm_t) 0x02000009) +/** SHA2-384 */ +#define PSA_ALG_SHA_384 ((psa_algorithm_t) 0x0200000a) +/** SHA2-512 */ +#define PSA_ALG_SHA_512 ((psa_algorithm_t) 0x0200000b) +/** SHA2-512/224 */ +#define PSA_ALG_SHA_512_224 ((psa_algorithm_t) 0x0200000c) +/** SHA2-512/256 */ +#define PSA_ALG_SHA_512_256 ((psa_algorithm_t) 0x0200000d) +/** SHA3-224 */ +#define PSA_ALG_SHA3_224 ((psa_algorithm_t) 0x02000010) +/** SHA3-256 */ +#define PSA_ALG_SHA3_256 ((psa_algorithm_t) 0x02000011) +/** SHA3-384 */ +#define PSA_ALG_SHA3_384 ((psa_algorithm_t) 0x02000012) +/** SHA3-512 */ +#define PSA_ALG_SHA3_512 ((psa_algorithm_t) 0x02000013) +/** The first 512 bits (64 bytes) of the SHAKE256 output. + * + * This is the prehashing for Ed448ph (see #PSA_ALG_ED448PH). For other + * scenarios where a hash function based on SHA3/SHAKE is desired, SHA3-512 + * has the same output size and a (theoretically) higher security strength. + */ +#define PSA_ALG_SHAKE256_512 ((psa_algorithm_t) 0x02000015) + +/** In a hash-and-sign algorithm policy, allow any hash algorithm. + * + * This value may be used to form the algorithm usage field of a policy + * for a signature algorithm that is parametrized by a hash. The key + * may then be used to perform operations using the same signature + * algorithm parametrized with any supported hash. + * + * That is, suppose that `PSA_xxx_SIGNATURE` is one of the following macros: + * - #PSA_ALG_RSA_PKCS1V15_SIGN, #PSA_ALG_RSA_PSS, #PSA_ALG_RSA_PSS_ANY_SALT, + * - #PSA_ALG_ECDSA, #PSA_ALG_DETERMINISTIC_ECDSA. + * Then you may create and use a key as follows: + * - Set the key usage field using #PSA_ALG_ANY_HASH, for example: + * ``` + * psa_set_key_usage_flags(&attributes, PSA_KEY_USAGE_SIGN_HASH); // or VERIFY + * psa_set_key_algorithm(&attributes, PSA_xxx_SIGNATURE(PSA_ALG_ANY_HASH)); + * ``` + * - Import or generate key material. + * - Call psa_sign_hash() or psa_verify_hash(), passing + * an algorithm built from `PSA_xxx_SIGNATURE` and a specific hash. Each + * call to sign or verify a message may use a different hash. + * ``` + * psa_sign_hash(key, PSA_xxx_SIGNATURE(PSA_ALG_SHA_256), ...); + * psa_sign_hash(key, PSA_xxx_SIGNATURE(PSA_ALG_SHA_512), ...); + * psa_sign_hash(key, PSA_xxx_SIGNATURE(PSA_ALG_SHA3_256), ...); + * ``` + * + * This value may not be used to build other algorithms that are + * parametrized over a hash. For any valid use of this macro to build + * an algorithm \c alg, #PSA_ALG_IS_HASH_AND_SIGN(\c alg) is true. + * + * This value may not be used to build an algorithm specification to + * perform an operation. It is only valid to build policies. + */ +#define PSA_ALG_ANY_HASH ((psa_algorithm_t) 0x020000ff) + +#define PSA_ALG_MAC_SUBCATEGORY_MASK ((psa_algorithm_t) 0x00c00000) +#define PSA_ALG_HMAC_BASE ((psa_algorithm_t) 0x03800000) +/** Macro to build an HMAC algorithm. + * + * For example, #PSA_ALG_HMAC(#PSA_ALG_SHA_256) is HMAC-SHA-256. + * + * \param hash_alg A hash algorithm (\c PSA_ALG_XXX value such that + * #PSA_ALG_IS_HASH(\p hash_alg) is true). + * + * \return The corresponding HMAC algorithm. + * \return Unspecified if \p hash_alg is not a supported + * hash algorithm. + */ +#define PSA_ALG_HMAC(hash_alg) \ + (PSA_ALG_HMAC_BASE | ((hash_alg) & PSA_ALG_HASH_MASK)) + +#define PSA_ALG_HMAC_GET_HASH(hmac_alg) \ + (PSA_ALG_CATEGORY_HASH | ((hmac_alg) & PSA_ALG_HASH_MASK)) + +/** Whether the specified algorithm is an HMAC algorithm. + * + * HMAC is a family of MAC algorithms that are based on a hash function. + * + * \param alg An algorithm identifier (value of type #psa_algorithm_t). + * + * \return 1 if \p alg is an HMAC algorithm, 0 otherwise. + * This macro may return either 0 or 1 if \p alg is not a supported + * algorithm identifier. + */ +#define PSA_ALG_IS_HMAC(alg) \ + (((alg) & (PSA_ALG_CATEGORY_MASK | PSA_ALG_MAC_SUBCATEGORY_MASK)) == \ + PSA_ALG_HMAC_BASE) + +/* In the encoding of a MAC algorithm, the bits corresponding to + * PSA_ALG_MAC_TRUNCATION_MASK encode the length to which the MAC is + * truncated. As an exception, the value 0 means the untruncated algorithm, + * whatever its length is. The length is encoded in 6 bits, so it can + * reach up to 63; the largest MAC is 64 bytes so its trivial truncation + * to full length is correctly encoded as 0 and any non-trivial truncation + * is correctly encoded as a value between 1 and 63. */ +#define PSA_ALG_MAC_TRUNCATION_MASK ((psa_algorithm_t) 0x003f0000) +#define PSA_MAC_TRUNCATION_OFFSET 16 + +/* In the encoding of a MAC algorithm, the bit corresponding to + * #PSA_ALG_MAC_AT_LEAST_THIS_LENGTH_FLAG encodes the fact that the algorithm + * is a wildcard algorithm. A key with such wildcard algorithm as permitted + * algorithm policy can be used with any algorithm corresponding to the + * same base class and having a (potentially truncated) MAC length greater or + * equal than the one encoded in #PSA_ALG_MAC_TRUNCATION_MASK. */ +#define PSA_ALG_MAC_AT_LEAST_THIS_LENGTH_FLAG ((psa_algorithm_t) 0x00008000) + +/** Macro to build a truncated MAC algorithm. + * + * A truncated MAC algorithm is identical to the corresponding MAC + * algorithm except that the MAC value for the truncated algorithm + * consists of only the first \p mac_length bytes of the MAC value + * for the untruncated algorithm. + * + * \note This macro may allow constructing algorithm identifiers that + * are not valid, either because the specified length is larger + * than the untruncated MAC or because the specified length is + * smaller than permitted by the implementation. + * + * \note It is implementation-defined whether a truncated MAC that + * is truncated to the same length as the MAC of the untruncated + * algorithm is considered identical to the untruncated algorithm + * for policy comparison purposes. + * + * \param mac_alg A MAC algorithm identifier (value of type + * #psa_algorithm_t such that #PSA_ALG_IS_MAC(\p mac_alg) + * is true). This may be a truncated or untruncated + * MAC algorithm. + * \param mac_length Desired length of the truncated MAC in bytes. + * This must be at most the full length of the MAC + * and must be at least an implementation-specified + * minimum. The implementation-specified minimum + * shall not be zero. + * + * \return The corresponding MAC algorithm with the specified + * length. + * \return Unspecified if \p mac_alg is not a supported + * MAC algorithm or if \p mac_length is too small or + * too large for the specified MAC algorithm. + */ +#define PSA_ALG_TRUNCATED_MAC(mac_alg, mac_length) \ + (((mac_alg) & ~(PSA_ALG_MAC_TRUNCATION_MASK | \ + PSA_ALG_MAC_AT_LEAST_THIS_LENGTH_FLAG)) | \ + ((mac_length) << PSA_MAC_TRUNCATION_OFFSET & PSA_ALG_MAC_TRUNCATION_MASK)) + +/** Macro to build the base MAC algorithm corresponding to a truncated + * MAC algorithm. + * + * \param mac_alg A MAC algorithm identifier (value of type + * #psa_algorithm_t such that #PSA_ALG_IS_MAC(\p mac_alg) + * is true). This may be a truncated or untruncated + * MAC algorithm. + * + * \return The corresponding base MAC algorithm. + * \return Unspecified if \p mac_alg is not a supported + * MAC algorithm. + */ +#define PSA_ALG_FULL_LENGTH_MAC(mac_alg) \ + ((mac_alg) & ~(PSA_ALG_MAC_TRUNCATION_MASK | \ + PSA_ALG_MAC_AT_LEAST_THIS_LENGTH_FLAG)) + +/** Length to which a MAC algorithm is truncated. + * + * \param mac_alg A MAC algorithm identifier (value of type + * #psa_algorithm_t such that #PSA_ALG_IS_MAC(\p mac_alg) + * is true). + * + * \return Length of the truncated MAC in bytes. + * \return 0 if \p mac_alg is a non-truncated MAC algorithm. + * \return Unspecified if \p mac_alg is not a supported + * MAC algorithm. + */ +#define PSA_MAC_TRUNCATED_LENGTH(mac_alg) \ + (((mac_alg) & PSA_ALG_MAC_TRUNCATION_MASK) >> PSA_MAC_TRUNCATION_OFFSET) + +/** Macro to build a MAC minimum-MAC-length wildcard algorithm. + * + * A minimum-MAC-length MAC wildcard algorithm permits all MAC algorithms + * sharing the same base algorithm, and where the (potentially truncated) MAC + * length of the specific algorithm is equal to or larger then the wildcard + * algorithm's minimum MAC length. + * + * \note When setting the minimum required MAC length to less than the + * smallest MAC length allowed by the base algorithm, this effectively + * becomes an 'any-MAC-length-allowed' policy for that base algorithm. + * + * \param mac_alg A MAC algorithm identifier (value of type + * #psa_algorithm_t such that #PSA_ALG_IS_MAC(\p mac_alg) + * is true). + * \param min_mac_length Desired minimum length of the message authentication + * code in bytes. This must be at most the untruncated + * length of the MAC and must be at least 1. + * + * \return The corresponding MAC wildcard algorithm with the + * specified minimum length. + * \return Unspecified if \p mac_alg is not a supported MAC + * algorithm or if \p min_mac_length is less than 1 or + * too large for the specified MAC algorithm. + */ +#define PSA_ALG_AT_LEAST_THIS_LENGTH_MAC(mac_alg, min_mac_length) \ + (PSA_ALG_TRUNCATED_MAC(mac_alg, min_mac_length) | \ + PSA_ALG_MAC_AT_LEAST_THIS_LENGTH_FLAG) + +#define PSA_ALG_CIPHER_MAC_BASE ((psa_algorithm_t) 0x03c00000) +/** The CBC-MAC construction over a block cipher + * + * \warning CBC-MAC is insecure in many cases. + * A more secure mode, such as #PSA_ALG_CMAC, is recommended. + */ +#define PSA_ALG_CBC_MAC ((psa_algorithm_t) 0x03c00100) +/** The CMAC construction over a block cipher */ +#define PSA_ALG_CMAC ((psa_algorithm_t) 0x03c00200) + +/** Whether the specified algorithm is a MAC algorithm based on a block cipher. + * + * \param alg An algorithm identifier (value of type #psa_algorithm_t). + * + * \return 1 if \p alg is a MAC algorithm based on a block cipher, 0 otherwise. + * This macro may return either 0 or 1 if \p alg is not a supported + * algorithm identifier. + */ +#define PSA_ALG_IS_BLOCK_CIPHER_MAC(alg) \ + (((alg) & (PSA_ALG_CATEGORY_MASK | PSA_ALG_MAC_SUBCATEGORY_MASK)) == \ + PSA_ALG_CIPHER_MAC_BASE) + +#define PSA_ALG_CIPHER_STREAM_FLAG ((psa_algorithm_t) 0x00800000) +#define PSA_ALG_CIPHER_FROM_BLOCK_FLAG ((psa_algorithm_t) 0x00400000) + +/** Whether the specified algorithm is a stream cipher. + * + * A stream cipher is a symmetric cipher that encrypts or decrypts messages + * by applying a bitwise-xor with a stream of bytes that is generated + * from a key. + * + * \param alg An algorithm identifier (value of type #psa_algorithm_t). + * + * \return 1 if \p alg is a stream cipher algorithm, 0 otherwise. + * This macro may return either 0 or 1 if \p alg is not a supported + * algorithm identifier or if it is not a symmetric cipher algorithm. + */ +#define PSA_ALG_IS_STREAM_CIPHER(alg) \ + (((alg) & (PSA_ALG_CATEGORY_MASK | PSA_ALG_CIPHER_STREAM_FLAG)) == \ + (PSA_ALG_CATEGORY_CIPHER | PSA_ALG_CIPHER_STREAM_FLAG)) + +/** The stream cipher mode of a stream cipher algorithm. + * + * The underlying stream cipher is determined by the key type. + * - To use ChaCha20, use a key type of #PSA_KEY_TYPE_CHACHA20. + */ +#define PSA_ALG_STREAM_CIPHER ((psa_algorithm_t) 0x04800100) + +/** The CTR stream cipher mode. + * + * CTR is a stream cipher which is built from a block cipher. + * The underlying block cipher is determined by the key type. + * For example, to use AES-128-CTR, use this algorithm with + * a key of type #PSA_KEY_TYPE_AES and a length of 128 bits (16 bytes). + */ +#define PSA_ALG_CTR ((psa_algorithm_t) 0x04c01000) + +/** The CFB stream cipher mode. + * + * The underlying block cipher is determined by the key type. + */ +#define PSA_ALG_CFB ((psa_algorithm_t) 0x04c01100) + +/** The OFB stream cipher mode. + * + * The underlying block cipher is determined by the key type. + */ +#define PSA_ALG_OFB ((psa_algorithm_t) 0x04c01200) + +/** The XTS cipher mode. + * + * XTS is a cipher mode which is built from a block cipher. It requires at + * least one full block of input, but beyond this minimum the input + * does not need to be a whole number of blocks. + */ +#define PSA_ALG_XTS ((psa_algorithm_t) 0x0440ff00) + +/** The Electronic Code Book (ECB) mode of a block cipher, with no padding. + * + * \warning ECB mode does not protect the confidentiality of the encrypted data + * except in extremely narrow circumstances. It is recommended that applications + * only use ECB if they need to construct an operating mode that the + * implementation does not provide. Implementations are encouraged to provide + * the modes that applications need in preference to supporting direct access + * to ECB. + * + * The underlying block cipher is determined by the key type. + * + * This symmetric cipher mode can only be used with messages whose lengths are a + * multiple of the block size of the chosen block cipher. + * + * ECB mode does not accept an initialization vector (IV). When using a + * multi-part cipher operation with this algorithm, psa_cipher_generate_iv() + * and psa_cipher_set_iv() must not be called. + */ +#define PSA_ALG_ECB_NO_PADDING ((psa_algorithm_t) 0x04404400) + +/** The CBC block cipher chaining mode, with no padding. + * + * The underlying block cipher is determined by the key type. + * + * This symmetric cipher mode can only be used with messages whose lengths + * are whole number of blocks for the chosen block cipher. + */ +#define PSA_ALG_CBC_NO_PADDING ((psa_algorithm_t) 0x04404000) + +/** The CBC block cipher chaining mode with PKCS#7 padding. + * + * The underlying block cipher is determined by the key type. + * + * This is the padding method defined by PKCS#7 (RFC 2315) §10.3. + */ +#define PSA_ALG_CBC_PKCS7 ((psa_algorithm_t) 0x04404100) + +#define PSA_ALG_AEAD_FROM_BLOCK_FLAG ((psa_algorithm_t) 0x00400000) + +/** Whether the specified algorithm is an AEAD mode on a block cipher. + * + * \param alg An algorithm identifier (value of type #psa_algorithm_t). + * + * \return 1 if \p alg is an AEAD algorithm which is an AEAD mode based on + * a block cipher, 0 otherwise. + * This macro may return either 0 or 1 if \p alg is not a supported + * algorithm identifier. + */ +#define PSA_ALG_IS_AEAD_ON_BLOCK_CIPHER(alg) \ + (((alg) & (PSA_ALG_CATEGORY_MASK | PSA_ALG_AEAD_FROM_BLOCK_FLAG)) == \ + (PSA_ALG_CATEGORY_AEAD | PSA_ALG_AEAD_FROM_BLOCK_FLAG)) + +/** The CCM authenticated encryption algorithm. + * + * The underlying block cipher is determined by the key type. + */ +#define PSA_ALG_CCM ((psa_algorithm_t) 0x05500100) + +/** The CCM* cipher mode without authentication. + * + * This is CCM* as specified in IEEE 802.15.4 §7, with a tag length of 0. + * For CCM* with a nonzero tag length, use the AEAD algorithm #PSA_ALG_CCM. + * + * The underlying block cipher is determined by the key type. + * + * Currently only 13-byte long IV's are supported. + */ +#define PSA_ALG_CCM_STAR_NO_TAG ((psa_algorithm_t) 0x04c01300) + +/** The GCM authenticated encryption algorithm. + * + * The underlying block cipher is determined by the key type. + */ +#define PSA_ALG_GCM ((psa_algorithm_t) 0x05500200) + +/** The Chacha20-Poly1305 AEAD algorithm. + * + * The ChaCha20_Poly1305 construction is defined in RFC 7539. + * + * Implementations must support 12-byte nonces, may support 8-byte nonces, + * and should reject other sizes. + * + * Implementations must support 16-byte tags and should reject other sizes. + */ +#define PSA_ALG_CHACHA20_POLY1305 ((psa_algorithm_t) 0x05100500) + +/* In the encoding of an AEAD algorithm, the bits corresponding to + * PSA_ALG_AEAD_TAG_LENGTH_MASK encode the length of the AEAD tag. + * The constants for default lengths follow this encoding. + */ +#define PSA_ALG_AEAD_TAG_LENGTH_MASK ((psa_algorithm_t) 0x003f0000) +#define PSA_AEAD_TAG_LENGTH_OFFSET 16 + +/* In the encoding of an AEAD algorithm, the bit corresponding to + * #PSA_ALG_AEAD_AT_LEAST_THIS_LENGTH_FLAG encodes the fact that the algorithm + * is a wildcard algorithm. A key with such wildcard algorithm as permitted + * algorithm policy can be used with any algorithm corresponding to the + * same base class and having a tag length greater than or equal to the one + * encoded in #PSA_ALG_AEAD_TAG_LENGTH_MASK. */ +#define PSA_ALG_AEAD_AT_LEAST_THIS_LENGTH_FLAG ((psa_algorithm_t) 0x00008000) + +/** Macro to build a shortened AEAD algorithm. + * + * A shortened AEAD algorithm is similar to the corresponding AEAD + * algorithm, but has an authentication tag that consists of fewer bytes. + * Depending on the algorithm, the tag length may affect the calculation + * of the ciphertext. + * + * \param aead_alg An AEAD algorithm identifier (value of type + * #psa_algorithm_t such that #PSA_ALG_IS_AEAD(\p aead_alg) + * is true). + * \param tag_length Desired length of the authentication tag in bytes. + * + * \return The corresponding AEAD algorithm with the specified + * length. + * \return Unspecified if \p aead_alg is not a supported + * AEAD algorithm or if \p tag_length is not valid + * for the specified AEAD algorithm. + */ +#define PSA_ALG_AEAD_WITH_SHORTENED_TAG(aead_alg, tag_length) \ + (((aead_alg) & ~(PSA_ALG_AEAD_TAG_LENGTH_MASK | \ + PSA_ALG_AEAD_AT_LEAST_THIS_LENGTH_FLAG)) | \ + ((tag_length) << PSA_AEAD_TAG_LENGTH_OFFSET & \ + PSA_ALG_AEAD_TAG_LENGTH_MASK)) + +/** Retrieve the tag length of a specified AEAD algorithm + * + * \param aead_alg An AEAD algorithm identifier (value of type + * #psa_algorithm_t such that #PSA_ALG_IS_AEAD(\p aead_alg) + * is true). + * + * \return The tag length specified by the input algorithm. + * \return Unspecified if \p aead_alg is not a supported + * AEAD algorithm. + */ +#define PSA_ALG_AEAD_GET_TAG_LENGTH(aead_alg) \ + (((aead_alg) & PSA_ALG_AEAD_TAG_LENGTH_MASK) >> \ + PSA_AEAD_TAG_LENGTH_OFFSET) + +/** Calculate the corresponding AEAD algorithm with the default tag length. + * + * \param aead_alg An AEAD algorithm (\c PSA_ALG_XXX value such that + * #PSA_ALG_IS_AEAD(\p aead_alg) is true). + * + * \return The corresponding AEAD algorithm with the default + * tag length for that algorithm. + */ +#define PSA_ALG_AEAD_WITH_DEFAULT_LENGTH_TAG(aead_alg) \ + ( \ + PSA_ALG_AEAD_WITH_DEFAULT_LENGTH_TAG_CASE(aead_alg, PSA_ALG_CCM) \ + PSA_ALG_AEAD_WITH_DEFAULT_LENGTH_TAG_CASE(aead_alg, PSA_ALG_GCM) \ + PSA_ALG_AEAD_WITH_DEFAULT_LENGTH_TAG_CASE(aead_alg, PSA_ALG_CHACHA20_POLY1305) \ + 0) +#define PSA_ALG_AEAD_WITH_DEFAULT_LENGTH_TAG_CASE(aead_alg, ref) \ + PSA_ALG_AEAD_WITH_SHORTENED_TAG(aead_alg, 0) == \ + PSA_ALG_AEAD_WITH_SHORTENED_TAG(ref, 0) ? \ + ref : + +/** Macro to build an AEAD minimum-tag-length wildcard algorithm. + * + * A minimum-tag-length AEAD wildcard algorithm permits all AEAD algorithms + * sharing the same base algorithm, and where the tag length of the specific + * algorithm is equal to or larger then the minimum tag length specified by the + * wildcard algorithm. + * + * \note When setting the minimum required tag length to less than the + * smallest tag length allowed by the base algorithm, this effectively + * becomes an 'any-tag-length-allowed' policy for that base algorithm. + * + * \param aead_alg An AEAD algorithm identifier (value of type + * #psa_algorithm_t such that + * #PSA_ALG_IS_AEAD(\p aead_alg) is true). + * \param min_tag_length Desired minimum length of the authentication tag in + * bytes. This must be at least 1 and at most the largest + * allowed tag length of the algorithm. + * + * \return The corresponding AEAD wildcard algorithm with the + * specified minimum length. + * \return Unspecified if \p aead_alg is not a supported + * AEAD algorithm or if \p min_tag_length is less than 1 + * or too large for the specified AEAD algorithm. + */ +#define PSA_ALG_AEAD_WITH_AT_LEAST_THIS_LENGTH_TAG(aead_alg, min_tag_length) \ + (PSA_ALG_AEAD_WITH_SHORTENED_TAG(aead_alg, min_tag_length) | \ + PSA_ALG_AEAD_AT_LEAST_THIS_LENGTH_FLAG) + +#define PSA_ALG_RSA_PKCS1V15_SIGN_BASE ((psa_algorithm_t) 0x06000200) +/** RSA PKCS#1 v1.5 signature with hashing. + * + * This is the signature scheme defined by RFC 8017 + * (PKCS#1: RSA Cryptography Specifications) under the name + * RSASSA-PKCS1-v1_5. + * + * \param hash_alg A hash algorithm (\c PSA_ALG_XXX value such that + * #PSA_ALG_IS_HASH(\p hash_alg) is true). + * This includes #PSA_ALG_ANY_HASH + * when specifying the algorithm in a usage policy. + * + * \return The corresponding RSA PKCS#1 v1.5 signature algorithm. + * \return Unspecified if \p hash_alg is not a supported + * hash algorithm. + */ +#define PSA_ALG_RSA_PKCS1V15_SIGN(hash_alg) \ + (PSA_ALG_RSA_PKCS1V15_SIGN_BASE | ((hash_alg) & PSA_ALG_HASH_MASK)) +/** Raw PKCS#1 v1.5 signature. + * + * The input to this algorithm is the DigestInfo structure used by + * RFC 8017 (PKCS#1: RSA Cryptography Specifications), §9.2 + * steps 3–6. + */ +#define PSA_ALG_RSA_PKCS1V15_SIGN_RAW PSA_ALG_RSA_PKCS1V15_SIGN_BASE +#define PSA_ALG_IS_RSA_PKCS1V15_SIGN(alg) \ + (((alg) & ~PSA_ALG_HASH_MASK) == PSA_ALG_RSA_PKCS1V15_SIGN_BASE) + +#define PSA_ALG_RSA_PSS_BASE ((psa_algorithm_t) 0x06000300) +#define PSA_ALG_RSA_PSS_ANY_SALT_BASE ((psa_algorithm_t) 0x06001300) +/** RSA PSS signature with hashing. + * + * This is the signature scheme defined by RFC 8017 + * (PKCS#1: RSA Cryptography Specifications) under the name + * RSASSA-PSS, with the message generation function MGF1, and with + * a salt length equal to the length of the hash, or the largest + * possible salt length for the algorithm and key size if that is + * smaller than the hash length. The specified hash algorithm is + * used to hash the input message, to create the salted hash, and + * for the mask generation. + * + * \param hash_alg A hash algorithm (\c PSA_ALG_XXX value such that + * #PSA_ALG_IS_HASH(\p hash_alg) is true). + * This includes #PSA_ALG_ANY_HASH + * when specifying the algorithm in a usage policy. + * + * \return The corresponding RSA PSS signature algorithm. + * \return Unspecified if \p hash_alg is not a supported + * hash algorithm. + */ +#define PSA_ALG_RSA_PSS(hash_alg) \ + (PSA_ALG_RSA_PSS_BASE | ((hash_alg) & PSA_ALG_HASH_MASK)) + +/** RSA PSS signature with hashing with relaxed verification. + * + * This algorithm has the same behavior as #PSA_ALG_RSA_PSS when signing, + * but allows an arbitrary salt length (including \c 0) when verifying a + * signature. + * + * \param hash_alg A hash algorithm (\c PSA_ALG_XXX value such that + * #PSA_ALG_IS_HASH(\p hash_alg) is true). + * This includes #PSA_ALG_ANY_HASH + * when specifying the algorithm in a usage policy. + * + * \return The corresponding RSA PSS signature algorithm. + * \return Unspecified if \p hash_alg is not a supported + * hash algorithm. + */ +#define PSA_ALG_RSA_PSS_ANY_SALT(hash_alg) \ + (PSA_ALG_RSA_PSS_ANY_SALT_BASE | ((hash_alg) & PSA_ALG_HASH_MASK)) + +/** Whether the specified algorithm is RSA PSS with standard salt. + * + * \param alg An algorithm value or an algorithm policy wildcard. + * + * \return 1 if \p alg is of the form + * #PSA_ALG_RSA_PSS(\c hash_alg), + * where \c hash_alg is a hash algorithm or + * #PSA_ALG_ANY_HASH. 0 otherwise. + * This macro may return either 0 or 1 if \p alg is not + * a supported algorithm identifier or policy. + */ +#define PSA_ALG_IS_RSA_PSS_STANDARD_SALT(alg) \ + (((alg) & ~PSA_ALG_HASH_MASK) == PSA_ALG_RSA_PSS_BASE) + +/** Whether the specified algorithm is RSA PSS with any salt. + * + * \param alg An algorithm value or an algorithm policy wildcard. + * + * \return 1 if \p alg is of the form + * #PSA_ALG_RSA_PSS_ANY_SALT_BASE(\c hash_alg), + * where \c hash_alg is a hash algorithm or + * #PSA_ALG_ANY_HASH. 0 otherwise. + * This macro may return either 0 or 1 if \p alg is not + * a supported algorithm identifier or policy. + */ +#define PSA_ALG_IS_RSA_PSS_ANY_SALT(alg) \ + (((alg) & ~PSA_ALG_HASH_MASK) == PSA_ALG_RSA_PSS_ANY_SALT_BASE) + +/** Whether the specified algorithm is RSA PSS. + * + * This includes any of the RSA PSS algorithm variants, regardless of the + * constraints on salt length. + * + * \param alg An algorithm value or an algorithm policy wildcard. + * + * \return 1 if \p alg is of the form + * #PSA_ALG_RSA_PSS(\c hash_alg) or + * #PSA_ALG_RSA_PSS_ANY_SALT_BASE(\c hash_alg), + * where \c hash_alg is a hash algorithm or + * #PSA_ALG_ANY_HASH. 0 otherwise. + * This macro may return either 0 or 1 if \p alg is not + * a supported algorithm identifier or policy. + */ +#define PSA_ALG_IS_RSA_PSS(alg) \ + (PSA_ALG_IS_RSA_PSS_STANDARD_SALT(alg) || \ + PSA_ALG_IS_RSA_PSS_ANY_SALT(alg)) + +#define PSA_ALG_ECDSA_BASE ((psa_algorithm_t) 0x06000600) +/** ECDSA signature with hashing. + * + * This is the ECDSA signature scheme defined by ANSI X9.62, + * with a random per-message secret number (*k*). + * + * The representation of the signature as a byte string consists of + * the concatenation of the signature values *r* and *s*. Each of + * *r* and *s* is encoded as an *N*-octet string, where *N* is the length + * of the base point of the curve in octets. Each value is represented + * in big-endian order (most significant octet first). + * + * \param hash_alg A hash algorithm (\c PSA_ALG_XXX value such that + * #PSA_ALG_IS_HASH(\p hash_alg) is true). + * This includes #PSA_ALG_ANY_HASH + * when specifying the algorithm in a usage policy. + * + * \return The corresponding ECDSA signature algorithm. + * \return Unspecified if \p hash_alg is not a supported + * hash algorithm. + */ +#define PSA_ALG_ECDSA(hash_alg) \ + (PSA_ALG_ECDSA_BASE | ((hash_alg) & PSA_ALG_HASH_MASK)) +/** ECDSA signature without hashing. + * + * This is the same signature scheme as #PSA_ALG_ECDSA(), but + * without specifying a hash algorithm. This algorithm may only be + * used to sign or verify a sequence of bytes that should be an + * already-calculated hash. Note that the input is padded with + * zeros on the left or truncated on the left as required to fit + * the curve size. + */ +#define PSA_ALG_ECDSA_ANY PSA_ALG_ECDSA_BASE +#define PSA_ALG_DETERMINISTIC_ECDSA_BASE ((psa_algorithm_t) 0x06000700) +/** Deterministic ECDSA signature with hashing. + * + * This is the deterministic ECDSA signature scheme defined by RFC 6979. + * + * The representation of a signature is the same as with #PSA_ALG_ECDSA(). + * + * Note that when this algorithm is used for verification, signatures + * made with randomized ECDSA (#PSA_ALG_ECDSA(\p hash_alg)) with the + * same private key are accepted. In other words, + * #PSA_ALG_DETERMINISTIC_ECDSA(\p hash_alg) differs from + * #PSA_ALG_ECDSA(\p hash_alg) only for signature, not for verification. + * + * \param hash_alg A hash algorithm (\c PSA_ALG_XXX value such that + * #PSA_ALG_IS_HASH(\p hash_alg) is true). + * This includes #PSA_ALG_ANY_HASH + * when specifying the algorithm in a usage policy. + * + * \return The corresponding deterministic ECDSA signature + * algorithm. + * \return Unspecified if \p hash_alg is not a supported + * hash algorithm. + */ +#define PSA_ALG_DETERMINISTIC_ECDSA(hash_alg) \ + (PSA_ALG_DETERMINISTIC_ECDSA_BASE | ((hash_alg) & PSA_ALG_HASH_MASK)) +#define PSA_ALG_ECDSA_DETERMINISTIC_FLAG ((psa_algorithm_t) 0x00000100) +#define PSA_ALG_IS_ECDSA(alg) \ + (((alg) & ~PSA_ALG_HASH_MASK & ~PSA_ALG_ECDSA_DETERMINISTIC_FLAG) == \ + PSA_ALG_ECDSA_BASE) +#define PSA_ALG_ECDSA_IS_DETERMINISTIC(alg) \ + (((alg) & PSA_ALG_ECDSA_DETERMINISTIC_FLAG) != 0) +#define PSA_ALG_IS_DETERMINISTIC_ECDSA(alg) \ + (PSA_ALG_IS_ECDSA(alg) && PSA_ALG_ECDSA_IS_DETERMINISTIC(alg)) +#define PSA_ALG_IS_RANDOMIZED_ECDSA(alg) \ + (PSA_ALG_IS_ECDSA(alg) && !PSA_ALG_ECDSA_IS_DETERMINISTIC(alg)) + +/** Edwards-curve digital signature algorithm without prehashing (PureEdDSA), + * using standard parameters. + * + * Contexts are not supported in the current version of this specification + * because there is no suitable signature interface that can take the + * context as a parameter. A future version of this specification may add + * suitable functions and extend this algorithm to support contexts. + * + * PureEdDSA requires an elliptic curve key on a twisted Edwards curve. + * In this specification, the following curves are supported: + * - #PSA_ECC_FAMILY_TWISTED_EDWARDS, 255-bit: Ed25519 as specified + * in RFC 8032. + * The curve is Edwards25519. + * The hash function used internally is SHA-512. + * - #PSA_ECC_FAMILY_TWISTED_EDWARDS, 448-bit: Ed448 as specified + * in RFC 8032. + * The curve is Edwards448. + * The hash function used internally is the first 114 bytes of the + * SHAKE256 output. + * + * This algorithm can be used with psa_sign_message() and + * psa_verify_message(). Since there is no prehashing, it cannot be used + * with psa_sign_hash() or psa_verify_hash(). + * + * The signature format is the concatenation of R and S as defined by + * RFC 8032 §5.1.6 and §5.2.6 (a 64-byte string for Ed25519, a 114-byte + * string for Ed448). + */ +#define PSA_ALG_PURE_EDDSA ((psa_algorithm_t) 0x06000800) + +#define PSA_ALG_HASH_EDDSA_BASE ((psa_algorithm_t) 0x06000900) +#define PSA_ALG_IS_HASH_EDDSA(alg) \ + (((alg) & ~PSA_ALG_HASH_MASK) == PSA_ALG_HASH_EDDSA_BASE) + +/** Edwards-curve digital signature algorithm with prehashing (HashEdDSA), + * using SHA-512 and the Edwards25519 curve. + * + * See #PSA_ALG_PURE_EDDSA regarding context support and the signature format. + * + * This algorithm is Ed25519 as specified in RFC 8032. + * The curve is Edwards25519. + * The prehash is SHA-512. + * The hash function used internally is SHA-512. + * + * This is a hash-and-sign algorithm: to calculate a signature, + * you can either: + * - call psa_sign_message() on the message; + * - or calculate the SHA-512 hash of the message + * with psa_hash_compute() + * or with a multi-part hash operation started with psa_hash_setup(), + * using the hash algorithm #PSA_ALG_SHA_512, + * then sign the calculated hash with psa_sign_hash(). + * Verifying a signature is similar, using psa_verify_message() or + * psa_verify_hash() instead of the signature function. + */ +#define PSA_ALG_ED25519PH \ + (PSA_ALG_HASH_EDDSA_BASE | (PSA_ALG_SHA_512 & PSA_ALG_HASH_MASK)) + +/** Edwards-curve digital signature algorithm with prehashing (HashEdDSA), + * using SHAKE256 and the Edwards448 curve. + * + * See #PSA_ALG_PURE_EDDSA regarding context support and the signature format. + * + * This algorithm is Ed448 as specified in RFC 8032. + * The curve is Edwards448. + * The prehash is the first 64 bytes of the SHAKE256 output. + * The hash function used internally is the first 114 bytes of the + * SHAKE256 output. + * + * This is a hash-and-sign algorithm: to calculate a signature, + * you can either: + * - call psa_sign_message() on the message; + * - or calculate the first 64 bytes of the SHAKE256 output of the message + * with psa_hash_compute() + * or with a multi-part hash operation started with psa_hash_setup(), + * using the hash algorithm #PSA_ALG_SHAKE256_512, + * then sign the calculated hash with psa_sign_hash(). + * Verifying a signature is similar, using psa_verify_message() or + * psa_verify_hash() instead of the signature function. + */ +#define PSA_ALG_ED448PH \ + (PSA_ALG_HASH_EDDSA_BASE | (PSA_ALG_SHAKE256_512 & PSA_ALG_HASH_MASK)) + +/* Default definition, to be overridden if the library is extended with + * more hash-and-sign algorithms that we want to keep out of this header + * file. */ +#define PSA_ALG_IS_VENDOR_HASH_AND_SIGN(alg) 0 + +/** Whether the specified algorithm is a signature algorithm that can be used + * with psa_sign_hash() and psa_verify_hash(). + * + * This encompasses all strict hash-and-sign algorithms categorized by + * PSA_ALG_IS_HASH_AND_SIGN(), as well as algorithms that follow the + * paradigm more loosely: + * - #PSA_ALG_RSA_PKCS1V15_SIGN_RAW (expects its input to be an encoded hash) + * - #PSA_ALG_ECDSA_ANY (doesn't specify what kind of hash the input is) + * + * \param alg An algorithm identifier (value of type psa_algorithm_t). + * + * \return 1 if alg is a signature algorithm that can be used to sign a + * hash. 0 if alg is a signature algorithm that can only be used + * to sign a message. 0 if alg is not a signature algorithm. + * This macro can return either 0 or 1 if alg is not a + * supported algorithm identifier. + */ +#define PSA_ALG_IS_SIGN_HASH(alg) \ + (PSA_ALG_IS_RSA_PSS(alg) || PSA_ALG_IS_RSA_PKCS1V15_SIGN(alg) || \ + PSA_ALG_IS_ECDSA(alg) || PSA_ALG_IS_HASH_EDDSA(alg) || \ + PSA_ALG_IS_VENDOR_HASH_AND_SIGN(alg)) + +/** Whether the specified algorithm is a signature algorithm that can be used + * with psa_sign_message() and psa_verify_message(). + * + * \param alg An algorithm identifier (value of type #psa_algorithm_t). + * + * \return 1 if alg is a signature algorithm that can be used to sign a + * message. 0 if \p alg is a signature algorithm that can only be used + * to sign an already-calculated hash. 0 if \p alg is not a signature + * algorithm. This macro can return either 0 or 1 if \p alg is not a + * supported algorithm identifier. + */ +#define PSA_ALG_IS_SIGN_MESSAGE(alg) \ + (PSA_ALG_IS_SIGN_HASH(alg) || (alg) == PSA_ALG_PURE_EDDSA) + +/** Whether the specified algorithm is a hash-and-sign algorithm. + * + * Hash-and-sign algorithms are asymmetric (public-key) signature algorithms + * structured in two parts: first the calculation of a hash in a way that + * does not depend on the key, then the calculation of a signature from the + * hash value and the key. Hash-and-sign algorithms encode the hash + * used for the hashing step, and you can call #PSA_ALG_SIGN_GET_HASH + * to extract this algorithm. + * + * Thus, for a hash-and-sign algorithm, + * `psa_sign_message(key, alg, input, ...)` is equivalent to + * ``` + * psa_hash_compute(PSA_ALG_SIGN_GET_HASH(alg), input, ..., hash, ...); + * psa_sign_hash(key, alg, hash, ..., signature, ...); + * ``` + * Most usefully, separating the hash from the signature allows the hash + * to be calculated in multiple steps with psa_hash_setup(), psa_hash_update() + * and psa_hash_finish(). Likewise psa_verify_message() is equivalent to + * calculating the hash and then calling psa_verify_hash(). + * + * \param alg An algorithm identifier (value of type #psa_algorithm_t). + * + * \return 1 if \p alg is a hash-and-sign algorithm, 0 otherwise. + * This macro may return either 0 or 1 if \p alg is not a supported + * algorithm identifier. + */ +#define PSA_ALG_IS_HASH_AND_SIGN(alg) \ + (PSA_ALG_IS_SIGN_HASH(alg) && \ + ((alg) & PSA_ALG_HASH_MASK) != 0) + +/** Get the hash used by a hash-and-sign signature algorithm. + * + * A hash-and-sign algorithm is a signature algorithm which is + * composed of two phases: first a hashing phase which does not use + * the key and produces a hash of the input message, then a signing + * phase which only uses the hash and the key and not the message + * itself. + * + * \param alg A signature algorithm (\c PSA_ALG_XXX value such that + * #PSA_ALG_IS_SIGN(\p alg) is true). + * + * \return The underlying hash algorithm if \p alg is a hash-and-sign + * algorithm. + * \return 0 if \p alg is a signature algorithm that does not + * follow the hash-and-sign structure. + * \return Unspecified if \p alg is not a signature algorithm or + * if it is not supported by the implementation. + */ +#define PSA_ALG_SIGN_GET_HASH(alg) \ + (PSA_ALG_IS_HASH_AND_SIGN(alg) ? \ + ((alg) & PSA_ALG_HASH_MASK) | PSA_ALG_CATEGORY_HASH : \ + 0) + +/** RSA PKCS#1 v1.5 encryption. + */ +#define PSA_ALG_RSA_PKCS1V15_CRYPT ((psa_algorithm_t) 0x07000200) + +#define PSA_ALG_RSA_OAEP_BASE ((psa_algorithm_t) 0x07000300) +/** RSA OAEP encryption. + * + * This is the encryption scheme defined by RFC 8017 + * (PKCS#1: RSA Cryptography Specifications) under the name + * RSAES-OAEP, with the message generation function MGF1. + * + * \param hash_alg The hash algorithm (\c PSA_ALG_XXX value such that + * #PSA_ALG_IS_HASH(\p hash_alg) is true) to use + * for MGF1. + * + * \return The corresponding RSA OAEP encryption algorithm. + * \return Unspecified if \p hash_alg is not a supported + * hash algorithm. + */ +#define PSA_ALG_RSA_OAEP(hash_alg) \ + (PSA_ALG_RSA_OAEP_BASE | ((hash_alg) & PSA_ALG_HASH_MASK)) +#define PSA_ALG_IS_RSA_OAEP(alg) \ + (((alg) & ~PSA_ALG_HASH_MASK) == PSA_ALG_RSA_OAEP_BASE) +#define PSA_ALG_RSA_OAEP_GET_HASH(alg) \ + (PSA_ALG_IS_RSA_OAEP(alg) ? \ + ((alg) & PSA_ALG_HASH_MASK) | PSA_ALG_CATEGORY_HASH : \ + 0) + +#define PSA_ALG_HKDF_BASE ((psa_algorithm_t) 0x08000100) +/** Macro to build an HKDF algorithm. + * + * For example, `PSA_ALG_HKDF(PSA_ALG_SHA_256)` is HKDF using HMAC-SHA-256. + * + * This key derivation algorithm uses the following inputs: + * - #PSA_KEY_DERIVATION_INPUT_SALT is the salt used in the "extract" step. + * It is optional; if omitted, the derivation uses an empty salt. + * - #PSA_KEY_DERIVATION_INPUT_SECRET is the secret key used in the "extract" step. + * - #PSA_KEY_DERIVATION_INPUT_INFO is the info string used in the "expand" step. + * You must pass #PSA_KEY_DERIVATION_INPUT_SALT before #PSA_KEY_DERIVATION_INPUT_SECRET. + * You may pass #PSA_KEY_DERIVATION_INPUT_INFO at any time after steup and before + * starting to generate output. + * + * \warning HKDF processes the salt as follows: first hash it with hash_alg + * if the salt is longer than the block size of the hash algorithm; then + * pad with null bytes up to the block size. As a result, it is possible + * for distinct salt inputs to result in the same outputs. To ensure + * unique outputs, it is recommended to use a fixed length for salt values. + * + * \param hash_alg A hash algorithm (\c PSA_ALG_XXX value such that + * #PSA_ALG_IS_HASH(\p hash_alg) is true). + * + * \return The corresponding HKDF algorithm. + * \return Unspecified if \p hash_alg is not a supported + * hash algorithm. + */ +#define PSA_ALG_HKDF(hash_alg) \ + (PSA_ALG_HKDF_BASE | ((hash_alg) & PSA_ALG_HASH_MASK)) +/** Whether the specified algorithm is an HKDF algorithm. + * + * HKDF is a family of key derivation algorithms that are based on a hash + * function and the HMAC construction. + * + * \param alg An algorithm identifier (value of type #psa_algorithm_t). + * + * \return 1 if \c alg is an HKDF algorithm, 0 otherwise. + * This macro may return either 0 or 1 if \c alg is not a supported + * key derivation algorithm identifier. + */ +#define PSA_ALG_IS_HKDF(alg) \ + (((alg) & ~PSA_ALG_HASH_MASK) == PSA_ALG_HKDF_BASE) +#define PSA_ALG_HKDF_GET_HASH(hkdf_alg) \ + (PSA_ALG_CATEGORY_HASH | ((hkdf_alg) & PSA_ALG_HASH_MASK)) + +#define PSA_ALG_HKDF_EXTRACT_BASE ((psa_algorithm_t) 0x08000400) +/** Macro to build an HKDF-Extract algorithm. + * + * For example, `PSA_ALG_HKDF_EXTRACT(PSA_ALG_SHA_256)` is + * HKDF-Extract using HMAC-SHA-256. + * + * This key derivation algorithm uses the following inputs: + * - PSA_KEY_DERIVATION_INPUT_SALT is the salt. + * - PSA_KEY_DERIVATION_INPUT_SECRET is the input keying material used in the + * "extract" step. + * The inputs are mandatory and must be passed in the order above. + * Each input may only be passed once. + * + * \warning HKDF-Extract is not meant to be used on its own. PSA_ALG_HKDF + * should be used instead if possible. PSA_ALG_HKDF_EXTRACT is provided + * as a separate algorithm for the sake of protocols that use it as a + * building block. It may also be a slight performance optimization + * in applications that use HKDF with the same salt and key but many + * different info strings. + * + * \warning HKDF processes the salt as follows: first hash it with hash_alg + * if the salt is longer than the block size of the hash algorithm; then + * pad with null bytes up to the block size. As a result, it is possible + * for distinct salt inputs to result in the same outputs. To ensure + * unique outputs, it is recommended to use a fixed length for salt values. + * + * \param hash_alg A hash algorithm (\c PSA_ALG_XXX value such that + * #PSA_ALG_IS_HASH(\p hash_alg) is true). + * + * \return The corresponding HKDF-Extract algorithm. + * \return Unspecified if \p hash_alg is not a supported + * hash algorithm. + */ +#define PSA_ALG_HKDF_EXTRACT(hash_alg) \ + (PSA_ALG_HKDF_EXTRACT_BASE | ((hash_alg) & PSA_ALG_HASH_MASK)) +/** Whether the specified algorithm is an HKDF-Extract algorithm. + * + * HKDF-Extract is a family of key derivation algorithms that are based + * on a hash function and the HMAC construction. + * + * \param alg An algorithm identifier (value of type #psa_algorithm_t). + * + * \return 1 if \c alg is an HKDF-Extract algorithm, 0 otherwise. + * This macro may return either 0 or 1 if \c alg is not a supported + * key derivation algorithm identifier. + */ +#define PSA_ALG_IS_HKDF_EXTRACT(alg) \ + (((alg) & ~PSA_ALG_HASH_MASK) == PSA_ALG_HKDF_EXTRACT_BASE) + +#define PSA_ALG_HKDF_EXPAND_BASE ((psa_algorithm_t) 0x08000500) +/** Macro to build an HKDF-Expand algorithm. + * + * For example, `PSA_ALG_HKDF_EXPAND(PSA_ALG_SHA_256)` is + * HKDF-Expand using HMAC-SHA-256. + * + * This key derivation algorithm uses the following inputs: + * - PSA_KEY_DERIVATION_INPUT_SECRET is the pseudorandom key (PRK). + * - PSA_KEY_DERIVATION_INPUT_INFO is the info string. + * + * The inputs are mandatory and must be passed in the order above. + * Each input may only be passed once. + * + * \warning HKDF-Expand is not meant to be used on its own. `PSA_ALG_HKDF` + * should be used instead if possible. `PSA_ALG_HKDF_EXPAND` is provided as + * a separate algorithm for the sake of protocols that use it as a building + * block. It may also be a slight performance optimization in applications + * that use HKDF with the same salt and key but many different info strings. + * + * \param hash_alg A hash algorithm (\c PSA_ALG_XXX value such that + * #PSA_ALG_IS_HASH(\p hash_alg) is true). + * + * \return The corresponding HKDF-Expand algorithm. + * \return Unspecified if \p hash_alg is not a supported + * hash algorithm. + */ +#define PSA_ALG_HKDF_EXPAND(hash_alg) \ + (PSA_ALG_HKDF_EXPAND_BASE | ((hash_alg) & PSA_ALG_HASH_MASK)) +/** Whether the specified algorithm is an HKDF-Expand algorithm. + * + * HKDF-Expand is a family of key derivation algorithms that are based + * on a hash function and the HMAC construction. + * + * \param alg An algorithm identifier (value of type #psa_algorithm_t). + * + * \return 1 if \c alg is an HKDF-Expand algorithm, 0 otherwise. + * This macro may return either 0 or 1 if \c alg is not a supported + * key derivation algorithm identifier. + */ +#define PSA_ALG_IS_HKDF_EXPAND(alg) \ + (((alg) & ~PSA_ALG_HASH_MASK) == PSA_ALG_HKDF_EXPAND_BASE) + +/** Whether the specified algorithm is an HKDF or HKDF-Extract or + * HKDF-Expand algorithm. + * + * + * \param alg An algorithm identifier (value of type #psa_algorithm_t). + * + * \return 1 if \c alg is any HKDF type algorithm, 0 otherwise. + * This macro may return either 0 or 1 if \c alg is not a supported + * key derivation algorithm identifier. + */ +#define PSA_ALG_IS_ANY_HKDF(alg) \ + (((alg) & ~PSA_ALG_HASH_MASK) == PSA_ALG_HKDF_BASE || \ + ((alg) & ~PSA_ALG_HASH_MASK) == PSA_ALG_HKDF_EXTRACT_BASE || \ + ((alg) & ~PSA_ALG_HASH_MASK) == PSA_ALG_HKDF_EXPAND_BASE) + +#define PSA_ALG_TLS12_PRF_BASE ((psa_algorithm_t) 0x08000200) +/** Macro to build a TLS-1.2 PRF algorithm. + * + * TLS 1.2 uses a custom pseudorandom function (PRF) for key schedule, + * specified in Section 5 of RFC 5246. It is based on HMAC and can be + * used with either SHA-256 or SHA-384. + * + * This key derivation algorithm uses the following inputs, which must be + * passed in the order given here: + * - #PSA_KEY_DERIVATION_INPUT_SEED is the seed. + * - #PSA_KEY_DERIVATION_INPUT_SECRET is the secret key. + * - #PSA_KEY_DERIVATION_INPUT_LABEL is the label. + * + * For the application to TLS-1.2 key expansion, the seed is the + * concatenation of ServerHello.Random + ClientHello.Random, + * and the label is "key expansion". + * + * For example, `PSA_ALG_TLS12_PRF(PSA_ALG_SHA_256)` represents the + * TLS 1.2 PRF using HMAC-SHA-256. + * + * \param hash_alg A hash algorithm (\c PSA_ALG_XXX value such that + * #PSA_ALG_IS_HASH(\p hash_alg) is true). + * + * \return The corresponding TLS-1.2 PRF algorithm. + * \return Unspecified if \p hash_alg is not a supported + * hash algorithm. + */ +#define PSA_ALG_TLS12_PRF(hash_alg) \ + (PSA_ALG_TLS12_PRF_BASE | ((hash_alg) & PSA_ALG_HASH_MASK)) + +/** Whether the specified algorithm is a TLS-1.2 PRF algorithm. + * + * \param alg An algorithm identifier (value of type #psa_algorithm_t). + * + * \return 1 if \c alg is a TLS-1.2 PRF algorithm, 0 otherwise. + * This macro may return either 0 or 1 if \c alg is not a supported + * key derivation algorithm identifier. + */ +#define PSA_ALG_IS_TLS12_PRF(alg) \ + (((alg) & ~PSA_ALG_HASH_MASK) == PSA_ALG_TLS12_PRF_BASE) +#define PSA_ALG_TLS12_PRF_GET_HASH(hkdf_alg) \ + (PSA_ALG_CATEGORY_HASH | ((hkdf_alg) & PSA_ALG_HASH_MASK)) + +#define PSA_ALG_TLS12_PSK_TO_MS_BASE ((psa_algorithm_t) 0x08000300) +/** Macro to build a TLS-1.2 PSK-to-MasterSecret algorithm. + * + * In a pure-PSK handshake in TLS 1.2, the master secret is derived + * from the PreSharedKey (PSK) through the application of padding + * (RFC 4279, Section 2) and the TLS-1.2 PRF (RFC 5246, Section 5). + * The latter is based on HMAC and can be used with either SHA-256 + * or SHA-384. + * + * This key derivation algorithm uses the following inputs, which must be + * passed in the order given here: + * - #PSA_KEY_DERIVATION_INPUT_SEED is the seed. + * - #PSA_KEY_DERIVATION_INPUT_OTHER_SECRET is the other secret for the + * computation of the premaster secret. This input is optional; + * if omitted, it defaults to a string of null bytes with the same length + * as the secret (PSK) input. + * - #PSA_KEY_DERIVATION_INPUT_SECRET is the secret key. + * - #PSA_KEY_DERIVATION_INPUT_LABEL is the label. + * + * For the application to TLS-1.2, the seed (which is + * forwarded to the TLS-1.2 PRF) is the concatenation of the + * ClientHello.Random + ServerHello.Random, + * the label is "master secret" or "extended master secret" and + * the other secret depends on the key exchange specified in the cipher suite: + * - for a plain PSK cipher suite (RFC 4279, Section 2), omit + * PSA_KEY_DERIVATION_INPUT_OTHER_SECRET + * - for a DHE-PSK (RFC 4279, Section 3) or ECDHE-PSK cipher suite + * (RFC 5489, Section 2), the other secret should be the output of the + * PSA_ALG_FFDH or PSA_ALG_ECDH key agreement performed with the peer. + * The recommended way to pass this input is to use a key derivation + * algorithm constructed as + * PSA_ALG_KEY_AGREEMENT(ka_alg, PSA_ALG_TLS12_PSK_TO_MS(hash_alg)) + * and to call psa_key_derivation_key_agreement(). Alternatively, + * this input may be an output of `psa_raw_key_agreement()` passed with + * psa_key_derivation_input_bytes(), or an equivalent input passed with + * psa_key_derivation_input_bytes() or psa_key_derivation_input_key(). + * - for a RSA-PSK cipher suite (RFC 4279, Section 4), the other secret + * should be the 48-byte client challenge (the PreMasterSecret of + * (RFC 5246, Section 7.4.7.1)) concatenation of the TLS version and + * a 46-byte random string chosen by the client. On the server, this is + * typically an output of psa_asymmetric_decrypt() using + * PSA_ALG_RSA_PKCS1V15_CRYPT, passed to the key derivation operation + * with `psa_key_derivation_input_bytes()`. + * + * For example, `PSA_ALG_TLS12_PSK_TO_MS(PSA_ALG_SHA_256)` represents the + * TLS-1.2 PSK to MasterSecret derivation PRF using HMAC-SHA-256. + * + * \param hash_alg A hash algorithm (\c PSA_ALG_XXX value such that + * #PSA_ALG_IS_HASH(\p hash_alg) is true). + * + * \return The corresponding TLS-1.2 PSK to MS algorithm. + * \return Unspecified if \p hash_alg is not a supported + * hash algorithm. + */ +#define PSA_ALG_TLS12_PSK_TO_MS(hash_alg) \ + (PSA_ALG_TLS12_PSK_TO_MS_BASE | ((hash_alg) & PSA_ALG_HASH_MASK)) + +/** Whether the specified algorithm is a TLS-1.2 PSK to MS algorithm. + * + * \param alg An algorithm identifier (value of type #psa_algorithm_t). + * + * \return 1 if \c alg is a TLS-1.2 PSK to MS algorithm, 0 otherwise. + * This macro may return either 0 or 1 if \c alg is not a supported + * key derivation algorithm identifier. + */ +#define PSA_ALG_IS_TLS12_PSK_TO_MS(alg) \ + (((alg) & ~PSA_ALG_HASH_MASK) == PSA_ALG_TLS12_PSK_TO_MS_BASE) +#define PSA_ALG_TLS12_PSK_TO_MS_GET_HASH(hkdf_alg) \ + (PSA_ALG_CATEGORY_HASH | ((hkdf_alg) & PSA_ALG_HASH_MASK)) + +/* The TLS 1.2 ECJPAKE-to-PMS KDF. It takes the shared secret K (an EC point + * in case of EC J-PAKE) and calculates SHA256(K.X) that the rest of TLS 1.2 + * will use to derive the session secret, as defined by step 2 of + * https://datatracker.ietf.org/doc/html/draft-cragie-tls-ecjpake-01#section-8.7. + * Uses PSA_ALG_SHA_256. + * This function takes a single input: + * #PSA_KEY_DERIVATION_INPUT_SECRET is the shared secret K from EC J-PAKE. + * The only supported curve is secp256r1 (the 256-bit curve in + * #PSA_ECC_FAMILY_SECP_R1), so the input must be exactly 65 bytes. + * The output has to be read as a single chunk of 32 bytes, defined as + * PSA_TLS12_ECJPAKE_TO_PMS_DATA_SIZE. + */ +#define PSA_ALG_TLS12_ECJPAKE_TO_PMS ((psa_algorithm_t) 0x08000609) + +/* This flag indicates whether the key derivation algorithm is suitable for + * use on low-entropy secrets such as password - these algorithms are also + * known as key stretching or password hashing schemes. These are also the + * algorithms that accepts inputs of type #PSA_KEY_DERIVATION_INPUT_PASSWORD. + * + * Those algorithms cannot be combined with a key agreement algorithm. + */ +#define PSA_ALG_KEY_DERIVATION_STRETCHING_FLAG ((psa_algorithm_t) 0x00800000) + +#define PSA_ALG_PBKDF2_HMAC_BASE ((psa_algorithm_t) 0x08800100) +/** Macro to build a PBKDF2-HMAC password hashing / key stretching algorithm. + * + * PBKDF2 is defined by PKCS#5, republished as RFC 8018 (section 5.2). + * This macro specifies the PBKDF2 algorithm constructed using a PRF based on + * HMAC with the specified hash. + * For example, `PSA_ALG_PBKDF2_HMAC(PSA_ALG_SHA_256)` specifies PBKDF2 + * using the PRF HMAC-SHA-256. + * + * This key derivation algorithm uses the following inputs, which must be + * provided in the following order: + * - #PSA_KEY_DERIVATION_INPUT_COST is the iteration count. + * This input step must be used exactly once. + * - #PSA_KEY_DERIVATION_INPUT_SALT is the salt. + * This input step must be used one or more times; if used several times, the + * inputs will be concatenated. This can be used to build the final salt + * from multiple sources, both public and secret (also known as pepper). + * - #PSA_KEY_DERIVATION_INPUT_PASSWORD is the password to be hashed. + * This input step must be used exactly once. + * + * \param hash_alg A hash algorithm (\c PSA_ALG_XXX value such that + * #PSA_ALG_IS_HASH(\p hash_alg) is true). + * + * \return The corresponding PBKDF2-HMAC-XXX algorithm. + * \return Unspecified if \p hash_alg is not a supported + * hash algorithm. + */ +#define PSA_ALG_PBKDF2_HMAC(hash_alg) \ + (PSA_ALG_PBKDF2_HMAC_BASE | ((hash_alg) & PSA_ALG_HASH_MASK)) + +/** Whether the specified algorithm is a PBKDF2-HMAC algorithm. + * + * \param alg An algorithm identifier (value of type #psa_algorithm_t). + * + * \return 1 if \c alg is a PBKDF2-HMAC algorithm, 0 otherwise. + * This macro may return either 0 or 1 if \c alg is not a supported + * key derivation algorithm identifier. + */ +#define PSA_ALG_IS_PBKDF2_HMAC(alg) \ + (((alg) & ~PSA_ALG_HASH_MASK) == PSA_ALG_PBKDF2_HMAC_BASE) + +#define PSA_ALG_SP800_108_COUNTER_CMAC ((psa_algorithm_t) 0x08000800) + +/** The PBKDF2-AES-CMAC-PRF-128 password hashing / key stretching algorithm. + * + * PBKDF2 is defined by PKCS#5, republished as RFC 8018 (section 5.2). + * This macro specifies the PBKDF2 algorithm constructed using the + * AES-CMAC-PRF-128 PRF specified by RFC 4615. + * + * This key derivation algorithm uses the same inputs as + * #PSA_ALG_PBKDF2_HMAC() with the same constraints. + */ +#define PSA_ALG_PBKDF2_AES_CMAC_PRF_128 ((psa_algorithm_t) 0x08800200) + +#define PSA_ALG_SRP_PASSWORD_HASH_BASE ((psa_algorithm_t) 0x08800300) + /** The SRP password to password-hash KDF. + * It takes the password p, the salt s, and the user id u. + * It calculates the password hash h as + * h = H(salt || H(u || ":" || p)) + * where H is the given hash algorithm. + * + * This key derivation algorithm uses the following inputs, which must be + * provided in the following order: + * - #PSA_KEY_DERIVATION_INPUT_INFO is the user id. + * - #PSA_KEY_DERIVATION_INPUT_PASSWORD is the password. + * - #PSA_KEY_DERIVATION_INPUT_SALT is the salt. + * The output has to be read as a key of type PSA_KEY_TYPE_SRP_KEY_PAIR. + */ +#define PSA_ALG_SRP_PASSWORD_HASH(hash_alg) \ + (PSA_ALG_SRP_PASSWORD_HASH_BASE | ((hash_alg) & PSA_ALG_HASH_MASK)) + + /** Whether the specified algorithm is a key derivation algorithm constructed + * using #PSA_ALG_SRP_PASSWORD_HASH(\p hash_alg). + * + * \param alg An algorithm identifier (value of type #psa_algorithm_t). + * + * \return 1 if \p alg is a key derivation algorithm constructed using #PSA_ALG_SRP_PASSWORD_HASH(), + * 0 otherwise. This macro may return either 0 or 1 if \c alg is not a supported + * key derivation algorithm identifier. + */ +#define PSA_ALG_IS_SRP_PASSWORD_HASH(alg) \ + (((alg) & ~PSA_ALG_HASH_MASK) == PSA_ALG_SRP_PASSWORD_HASH_BASE) + +#define PSA_ALG_KEY_DERIVATION_MASK ((psa_algorithm_t) 0xfe00ffff) +#define PSA_ALG_KEY_AGREEMENT_MASK ((psa_algorithm_t) 0xffff0000) + +/** Macro to build a combined algorithm that chains a key agreement with + * a key derivation. + * + * \param ka_alg A key agreement algorithm (\c PSA_ALG_XXX value such + * that #PSA_ALG_IS_KEY_AGREEMENT(\p ka_alg) is true). + * \param kdf_alg A key derivation algorithm (\c PSA_ALG_XXX value such + * that #PSA_ALG_IS_KEY_DERIVATION(\p kdf_alg) is true). + * + * \return The corresponding key agreement and derivation + * algorithm. + * \return Unspecified if \p ka_alg is not a supported + * key agreement algorithm or \p kdf_alg is not a + * supported key derivation algorithm. + */ +#define PSA_ALG_KEY_AGREEMENT(ka_alg, kdf_alg) \ + ((ka_alg) | (kdf_alg)) + +#define PSA_ALG_KEY_AGREEMENT_GET_KDF(alg) \ + (((alg) & PSA_ALG_KEY_DERIVATION_MASK) | PSA_ALG_CATEGORY_KEY_DERIVATION) + +#define PSA_ALG_KEY_AGREEMENT_GET_BASE(alg) \ + (((alg) & PSA_ALG_KEY_AGREEMENT_MASK) | PSA_ALG_CATEGORY_KEY_AGREEMENT) + +/** Whether the specified algorithm is a raw key agreement algorithm. + * + * A raw key agreement algorithm is one that does not specify + * a key derivation function. + * Usually, raw key agreement algorithms are constructed directly with + * a \c PSA_ALG_xxx macro while non-raw key agreement algorithms are + * constructed with #PSA_ALG_KEY_AGREEMENT(). + * + * \param alg An algorithm identifier (value of type #psa_algorithm_t). + * + * \return 1 if \p alg is a raw key agreement algorithm, 0 otherwise. + * This macro may return either 0 or 1 if \p alg is not a supported + * algorithm identifier. + */ +#define PSA_ALG_IS_RAW_KEY_AGREEMENT(alg) \ + (PSA_ALG_IS_KEY_AGREEMENT(alg) && \ + PSA_ALG_KEY_AGREEMENT_GET_KDF(alg) == PSA_ALG_CATEGORY_KEY_DERIVATION) + +#define PSA_ALG_IS_KEY_DERIVATION_OR_AGREEMENT(alg) \ + ((PSA_ALG_IS_KEY_DERIVATION(alg) || PSA_ALG_IS_KEY_AGREEMENT(alg))) + +/** The finite-field Diffie-Hellman (DH) key agreement algorithm. + * + * The shared secret produced by key agreement is + * `g^{ab}` in big-endian format. + * It is `ceiling(m / 8)` bytes long where `m` is the size of the prime `p` + * in bits. + */ +#define PSA_ALG_FFDH ((psa_algorithm_t) 0x09010000) + +/** Whether the specified algorithm is a finite field Diffie-Hellman algorithm. + * + * This includes the raw finite field Diffie-Hellman algorithm as well as + * finite-field Diffie-Hellman followed by any supporter key derivation + * algorithm. + * + * \param alg An algorithm identifier (value of type #psa_algorithm_t). + * + * \return 1 if \c alg is a finite field Diffie-Hellman algorithm, 0 otherwise. + * This macro may return either 0 or 1 if \c alg is not a supported + * key agreement algorithm identifier. + */ +#define PSA_ALG_IS_FFDH(alg) \ + (PSA_ALG_KEY_AGREEMENT_GET_BASE(alg) == PSA_ALG_FFDH) + +/** The elliptic curve Diffie-Hellman (ECDH) key agreement algorithm. + * + * The shared secret produced by key agreement is the x-coordinate of + * the shared secret point. It is always `ceiling(m / 8)` bytes long where + * `m` is the bit size associated with the curve, i.e. the bit size of the + * order of the curve's coordinate field. When `m` is not a multiple of 8, + * the byte containing the most significant bit of the shared secret + * is padded with zero bits. The byte order is either little-endian + * or big-endian depending on the curve type. + * + * - For Montgomery curves (curve types `PSA_ECC_FAMILY_CURVEXXX`), + * the shared secret is the x-coordinate of `d_A Q_B = d_B Q_A` + * in little-endian byte order. + * The bit size is 448 for Curve448 and 255 for Curve25519. + * - For Weierstrass curves over prime fields (curve types + * `PSA_ECC_FAMILY_SECPXXX` and `PSA_ECC_FAMILY_BRAINPOOL_PXXX`), + * the shared secret is the x-coordinate of `d_A Q_B = d_B Q_A` + * in big-endian byte order. + * The bit size is `m = ceiling(log_2(p))` for the field `F_p`. + * - For Weierstrass curves over binary fields (curve types + * `PSA_ECC_FAMILY_SECTXXX`), + * the shared secret is the x-coordinate of `d_A Q_B = d_B Q_A` + * in big-endian byte order. + * The bit size is `m` for the field `F_{2^m}`. + */ +#define PSA_ALG_ECDH ((psa_algorithm_t) 0x09020000) + +/** Whether the specified algorithm is an elliptic curve Diffie-Hellman + * algorithm. + * + * This includes the raw elliptic curve Diffie-Hellman algorithm as well as + * elliptic curve Diffie-Hellman followed by any supporter key derivation + * algorithm. + * + * \param alg An algorithm identifier (value of type #psa_algorithm_t). + * + * \return 1 if \c alg is an elliptic curve Diffie-Hellman algorithm, + * 0 otherwise. + * This macro may return either 0 or 1 if \c alg is not a supported + * key agreement algorithm identifier. + */ +#define PSA_ALG_IS_ECDH(alg) \ + (PSA_ALG_KEY_AGREEMENT_GET_BASE(alg) == PSA_ALG_ECDH) + +/** Whether the specified algorithm encoding is a wildcard. + * + * Wildcard values may only be used to set the usage algorithm field in + * a policy, not to perform an operation. + * + * \param alg An algorithm identifier (value of type #psa_algorithm_t). + * + * \return 1 if \c alg is a wildcard algorithm encoding. + * \return 0 if \c alg is a non-wildcard algorithm encoding (suitable for + * an operation). + * \return This macro may return either 0 or 1 if \c alg is not a supported + * algorithm identifier. + */ +#define PSA_ALG_IS_WILDCARD(alg) \ + (PSA_ALG_IS_HASH_AND_SIGN(alg) ? \ + PSA_ALG_SIGN_GET_HASH(alg) == PSA_ALG_ANY_HASH : \ + PSA_ALG_IS_MAC(alg) ? \ + (alg & PSA_ALG_MAC_AT_LEAST_THIS_LENGTH_FLAG) != 0 : \ + PSA_ALG_IS_AEAD(alg) ? \ + (alg & PSA_ALG_AEAD_AT_LEAST_THIS_LENGTH_FLAG) != 0 : \ + (alg) == PSA_ALG_ANY_HASH) + +/** Get the hash used by a composite algorithm. + * + * \param alg An algorithm identifier (value of type #psa_algorithm_t). + * + * \return The underlying hash algorithm if alg is a composite algorithm that + * uses a hash algorithm. + * + * \return \c 0 if alg is not a composite algorithm that uses a hash. + */ +#define PSA_ALG_GET_HASH(alg) \ + (((alg) & 0x000000ff) == 0 ? ((psa_algorithm_t) 0) : 0x02000000 | ((alg) & 0x000000ff)) + +/**@}*/ + +/** \defgroup key_lifetimes Key lifetimes + * @{ + */ + +/* Note that location and persistence level values are embedded in the + * persistent key store, as part of key metadata. As a consequence, they + * must not be changed (unless the storage format version changes). + */ + +/** The default lifetime for volatile keys. + * + * A volatile key only exists as long as the identifier to it is not destroyed. + * The key material is guaranteed to be erased on a power reset. + * + * A key with this lifetime is typically stored in the RAM area of the + * PSA Crypto subsystem. However this is an implementation choice. + * If an implementation stores data about the key in a non-volatile memory, + * it must release all the resources associated with the key and erase the + * key material if the calling application terminates. + */ +#define PSA_KEY_LIFETIME_VOLATILE ((psa_key_lifetime_t) 0x00000000) + +/** The default lifetime for persistent keys. + * + * A persistent key remains in storage until it is explicitly destroyed or + * until the corresponding storage area is wiped. This specification does + * not define any mechanism to wipe a storage area, but integrations may + * provide their own mechanism (for example to perform a factory reset, + * to prepare for device refurbishment, or to uninstall an application). + * + * This lifetime value is the default storage area for the calling + * application. Integrations of Mbed TLS may support other persistent lifetimes. + * See ::psa_key_lifetime_t for more information. + */ +#define PSA_KEY_LIFETIME_PERSISTENT ((psa_key_lifetime_t) 0x00000001) + +/** The persistence level of volatile keys. + * + * See ::psa_key_persistence_t for more information. + */ +#define PSA_KEY_PERSISTENCE_VOLATILE ((psa_key_persistence_t) 0x00) + +/** The default persistence level for persistent keys. + * + * See ::psa_key_persistence_t for more information. + */ +#define PSA_KEY_PERSISTENCE_DEFAULT ((psa_key_persistence_t) 0x01) + +/** A persistence level indicating that a key is never destroyed. + * + * See ::psa_key_persistence_t for more information. + */ +#define PSA_KEY_PERSISTENCE_READ_ONLY ((psa_key_persistence_t) 0xff) + +#define PSA_KEY_LIFETIME_GET_PERSISTENCE(lifetime) \ + ((psa_key_persistence_t) ((lifetime) & 0x000000ff)) + +#define PSA_KEY_LIFETIME_GET_LOCATION(lifetime) \ + ((psa_key_location_t) ((lifetime) >> 8)) + +/** Whether a key lifetime indicates that the key is volatile. + * + * A volatile key is automatically destroyed by the implementation when + * the application instance terminates. In particular, a volatile key + * is automatically destroyed on a power reset of the device. + * + * A key that is not volatile is persistent. Persistent keys are + * preserved until the application explicitly destroys them or until an + * implementation-specific device management event occurs (for example, + * a factory reset). + * + * \param lifetime The lifetime value to query (value of type + * ::psa_key_lifetime_t). + * + * \return \c 1 if the key is volatile, otherwise \c 0. + */ +#define PSA_KEY_LIFETIME_IS_VOLATILE(lifetime) \ + (PSA_KEY_LIFETIME_GET_PERSISTENCE(lifetime) == \ + PSA_KEY_PERSISTENCE_VOLATILE) + +/** Whether a key lifetime indicates that the key is read-only. + * + * Read-only keys cannot be created or destroyed through the PSA Crypto API. + * They must be created through platform-specific means that bypass the API. + * + * Some platforms may offer ways to destroy read-only keys. For example, + * consider a platform with multiple levels of privilege, where a + * low-privilege application can use a key but is not allowed to destroy + * it, and the platform exposes the key to the application with a read-only + * lifetime. High-privilege code can destroy the key even though the + * application sees the key as read-only. + * + * \param lifetime The lifetime value to query (value of type + * ::psa_key_lifetime_t). + * + * \return \c 1 if the key is read-only, otherwise \c 0. + */ +#define PSA_KEY_LIFETIME_IS_READ_ONLY(lifetime) \ + (PSA_KEY_LIFETIME_GET_PERSISTENCE(lifetime) == \ + PSA_KEY_PERSISTENCE_READ_ONLY) + +/** Construct a lifetime from a persistence level and a location. + * + * \param persistence The persistence level + * (value of type ::psa_key_persistence_t). + * \param location The location indicator + * (value of type ::psa_key_location_t). + * + * \return The constructed lifetime value. + */ +#define PSA_KEY_LIFETIME_FROM_PERSISTENCE_AND_LOCATION(persistence, location) \ + ((location) << 8 | (persistence)) + +/** The local storage area for persistent keys. + * + * This storage area is available on all systems that can store persistent + * keys without delegating the storage to a third-party cryptoprocessor. + * + * See ::psa_key_location_t for more information. + */ +#define PSA_KEY_LOCATION_LOCAL_STORAGE ((psa_key_location_t) 0x000000) + +#define PSA_KEY_LOCATION_VENDOR_FLAG ((psa_key_location_t) 0x800000) + +/* Note that key identifier values are embedded in the + * persistent key store, as part of key metadata. As a consequence, they + * must not be changed (unless the storage format version changes). + */ + +/** The null key identifier. + */ +/* *INDENT-OFF* (https://github.com/ARM-software/psa-arch-tests/issues/337) */ +#define PSA_KEY_ID_NULL ((psa_key_id_t)0) +/* *INDENT-ON* */ +/** The minimum value for a key identifier chosen by the application. + */ +#define PSA_KEY_ID_USER_MIN ((psa_key_id_t) 0x00000001) +/** The maximum value for a key identifier chosen by the application. + */ +#define PSA_KEY_ID_USER_MAX ((psa_key_id_t) 0x3fffffff) +/** The minimum value for a key identifier chosen by the implementation. + */ +#define PSA_KEY_ID_VENDOR_MIN ((psa_key_id_t) 0x40000000) +/** The maximum value for a key identifier chosen by the implementation. + */ +#define PSA_KEY_ID_VENDOR_MAX ((psa_key_id_t) 0x7fffffff) + + +#if !defined(MBEDTLS_PSA_CRYPTO_KEY_ID_ENCODES_OWNER) + +#define MBEDTLS_SVC_KEY_ID_INIT ((psa_key_id_t) 0) +#define MBEDTLS_SVC_KEY_ID_GET_KEY_ID(id) (id) +#define MBEDTLS_SVC_KEY_ID_GET_OWNER_ID(id) (0) + +/** Utility to initialize a key identifier at runtime. + * + * \param unused Unused parameter. + * \param key_id Identifier of the key. + */ +static inline mbedtls_svc_key_id_t mbedtls_svc_key_id_make( + unsigned int unused, psa_key_id_t key_id) +{ + (void) unused; + + return key_id; +} + +/** Compare two key identifiers. + * + * \param id1 First key identifier. + * \param id2 Second key identifier. + * + * \return Non-zero if the two key identifier are equal, zero otherwise. + */ +static inline int mbedtls_svc_key_id_equal(mbedtls_svc_key_id_t id1, + mbedtls_svc_key_id_t id2) +{ + return id1 == id2; +} + +/** Check whether a key identifier is null. + * + * \param key Key identifier. + * + * \return Non-zero if the key identifier is null, zero otherwise. + */ +static inline int mbedtls_svc_key_id_is_null(mbedtls_svc_key_id_t key) +{ + return key == 0; +} + +#else /* MBEDTLS_PSA_CRYPTO_KEY_ID_ENCODES_OWNER */ +#include "mbedtls/private_access.h" +#define MBEDTLS_SVC_KEY_ID_INIT ((mbedtls_svc_key_id_t){ 0, 0 }) +#define MBEDTLS_SVC_KEY_ID_GET_KEY_ID(id) ((id).MBEDTLS_PRIVATE(key_id)) +#define MBEDTLS_SVC_KEY_ID_GET_OWNER_ID(id) ((id).MBEDTLS_PRIVATE(owner)) + +/** Utility to initialize a key identifier at runtime. + * + * \param owner_id Identifier of the key owner. + * \param key_id Identifier of the key. + */ +static inline mbedtls_svc_key_id_t mbedtls_svc_key_id_make( + mbedtls_key_owner_id_t owner_id, psa_key_id_t key_id) +{ + return (mbedtls_svc_key_id_t){ .MBEDTLS_PRIVATE(key_id) = key_id, + .MBEDTLS_PRIVATE(owner) = owner_id }; +} + +/** Compare two key identifiers. + * + * \param id1 First key identifier. + * \param id2 Second key identifier. + * + * \return Non-zero if the two key identifier are equal, zero otherwise. + */ +static inline int mbedtls_svc_key_id_equal(mbedtls_svc_key_id_t id1, + mbedtls_svc_key_id_t id2) +{ + return (id1.MBEDTLS_PRIVATE(key_id) == id2.MBEDTLS_PRIVATE(key_id)) && + mbedtls_key_owner_id_equal(id1.MBEDTLS_PRIVATE(owner), id2.MBEDTLS_PRIVATE(owner)); +} + +/** Check whether a key identifier is null. + * + * \param key Key identifier. + * + * \return Non-zero if the key identifier is null, zero otherwise. + */ +static inline int mbedtls_svc_key_id_is_null(mbedtls_svc_key_id_t key) +{ + return key.MBEDTLS_PRIVATE(key_id) == 0; +} + +#endif /* !MBEDTLS_PSA_CRYPTO_KEY_ID_ENCODES_OWNER */ + +/**@}*/ + +/** \defgroup policy Key policies + * @{ + */ + +/* Note that key usage flags are embedded in the + * persistent key store, as part of key metadata. As a consequence, they + * must not be changed (unless the storage format version changes). + */ + +/** Whether the key may be exported. + * + * A public key or the public part of a key pair may always be exported + * regardless of the value of this permission flag. + * + * If a key does not have export permission, implementations shall not + * allow the key to be exported in plain form from the cryptoprocessor, + * whether through psa_export_key() or through a proprietary interface. + * The key may however be exportable in a wrapped form, i.e. in a form + * where it is encrypted by another key. + */ +#define PSA_KEY_USAGE_EXPORT ((psa_key_usage_t) 0x00000001) + +/** Whether the key may be copied. + * + * This flag allows the use of psa_copy_key() to make a copy of the key + * with the same policy or a more restrictive policy. + * + * For lifetimes for which the key is located in a secure element which + * enforce the non-exportability of keys, copying a key outside the secure + * element also requires the usage flag #PSA_KEY_USAGE_EXPORT. + * Copying the key inside the secure element is permitted with just + * #PSA_KEY_USAGE_COPY if the secure element supports it. + * For keys with the lifetime #PSA_KEY_LIFETIME_VOLATILE or + * #PSA_KEY_LIFETIME_PERSISTENT, the usage flag #PSA_KEY_USAGE_COPY + * is sufficient to permit the copy. + */ +#define PSA_KEY_USAGE_COPY ((psa_key_usage_t) 0x00000002) + +/** Whether the key may be used to encrypt a message. + * + * This flag allows the key to be used for a symmetric encryption operation, + * for an AEAD encryption-and-authentication operation, + * or for an asymmetric encryption operation, + * if otherwise permitted by the key's type and policy. + * + * For a key pair, this concerns the public key. + */ +#define PSA_KEY_USAGE_ENCRYPT ((psa_key_usage_t) 0x00000100) + +/** Whether the key may be used to decrypt a message. + * + * This flag allows the key to be used for a symmetric decryption operation, + * for an AEAD decryption-and-verification operation, + * or for an asymmetric decryption operation, + * if otherwise permitted by the key's type and policy. + * + * For a key pair, this concerns the private key. + */ +#define PSA_KEY_USAGE_DECRYPT ((psa_key_usage_t) 0x00000200) + +/** Whether the key may be used to sign a message. + * + * This flag allows the key to be used for a MAC calculation operation or for + * an asymmetric message signature operation, if otherwise permitted by the + * key’s type and policy. + * + * For a key pair, this concerns the private key. + */ +#define PSA_KEY_USAGE_SIGN_MESSAGE ((psa_key_usage_t) 0x00000400) + +/** Whether the key may be used to verify a message. + * + * This flag allows the key to be used for a MAC verification operation or for + * an asymmetric message signature verification operation, if otherwise + * permitted by the key’s type and policy. + * + * For a key pair, this concerns the public key. + */ +#define PSA_KEY_USAGE_VERIFY_MESSAGE ((psa_key_usage_t) 0x00000800) + +/** Whether the key may be used to sign a message. + * + * This flag allows the key to be used for a MAC calculation operation + * or for an asymmetric signature operation, + * if otherwise permitted by the key's type and policy. + * + * For a key pair, this concerns the private key. + */ +#define PSA_KEY_USAGE_SIGN_HASH ((psa_key_usage_t) 0x00001000) + +/** Whether the key may be used to verify a message signature. + * + * This flag allows the key to be used for a MAC verification operation + * or for an asymmetric signature verification operation, + * if otherwise permitted by the key's type and policy. + * + * For a key pair, this concerns the public key. + */ +#define PSA_KEY_USAGE_VERIFY_HASH ((psa_key_usage_t) 0x00002000) + +/** Whether the key may be used to derive other keys or produce a password + * hash. + * + * This flag allows the key to be used for a key derivation operation or for + * a key agreement operation, if otherwise permitted by the key's type and + * policy. + * + * If this flag is present on all keys used in calls to + * psa_key_derivation_input_key() for a key derivation operation, then it + * permits calling psa_key_derivation_output_bytes() or + * psa_key_derivation_output_key() at the end of the operation. + */ +#define PSA_KEY_USAGE_DERIVE ((psa_key_usage_t) 0x00004000) + +/** Whether the key may be used to verify the result of a key derivation, + * including password hashing. + * + * This flag allows the key to be used: + * + * This flag allows the key to be used in a key derivation operation, if + * otherwise permitted by the key's type and policy. + * + * If this flag is present on all keys used in calls to + * psa_key_derivation_input_key() for a key derivation operation, then it + * permits calling psa_key_derivation_verify_bytes() or + * psa_key_derivation_verify_key() at the end of the operation. + */ +#define PSA_KEY_USAGE_VERIFY_DERIVATION ((psa_key_usage_t) 0x00008000) + +/**@}*/ + +/** \defgroup derivation Key derivation + * @{ + */ + +/* Key input steps are not embedded in the persistent storage, so you can + * change them if needed: it's only an ABI change. */ + +/** A secret input for key derivation. + * + * This should be a key of type #PSA_KEY_TYPE_DERIVE + * (passed to psa_key_derivation_input_key()) + * or the shared secret resulting from a key agreement + * (obtained via psa_key_derivation_key_agreement()). + * + * The secret can also be a direct input (passed to + * key_derivation_input_bytes()). In this case, the derivation operation + * may not be used to derive keys: the operation will only allow + * psa_key_derivation_output_bytes(), + * psa_key_derivation_verify_bytes(), or + * psa_key_derivation_verify_key(), but not + * psa_key_derivation_output_key(). + */ +#define PSA_KEY_DERIVATION_INPUT_SECRET ((psa_key_derivation_step_t) 0x0101) + +/** A low-entropy secret input for password hashing / key stretching. + * + * This is usually a key of type #PSA_KEY_TYPE_PASSWORD (passed to + * psa_key_derivation_input_key()) or a direct input (passed to + * psa_key_derivation_input_bytes()) that is a password or passphrase. It can + * also be high-entropy secret such as a key of type #PSA_KEY_TYPE_DERIVE or + * the shared secret resulting from a key agreement. + * + * The secret can also be a direct input (passed to + * key_derivation_input_bytes()). In this case, the derivation operation + * may not be used to derive keys: the operation will only allow + * psa_key_derivation_output_bytes(), + * psa_key_derivation_verify_bytes(), or + * psa_key_derivation_verify_key(), but not + * psa_key_derivation_output_key(). + */ +#define PSA_KEY_DERIVATION_INPUT_PASSWORD ((psa_key_derivation_step_t) 0x0102) + +/** A high-entropy additional secret input for key derivation. + * + * This is typically the shared secret resulting from a key agreement obtained + * via `psa_key_derivation_key_agreement()`. It may alternatively be a key of + * type `PSA_KEY_TYPE_DERIVE` passed to `psa_key_derivation_input_key()`, or + * a direct input passed to `psa_key_derivation_input_bytes()`. + */ +#define PSA_KEY_DERIVATION_INPUT_OTHER_SECRET \ + ((psa_key_derivation_step_t) 0x0103) + +/** A label for key derivation. + * + * This should be a direct input. + * It can also be a key of type #PSA_KEY_TYPE_RAW_DATA. + */ +#define PSA_KEY_DERIVATION_INPUT_LABEL ((psa_key_derivation_step_t) 0x0201) + +/** A salt for key derivation. + * + * This should be a direct input. + * It can also be a key of type #PSA_KEY_TYPE_RAW_DATA or + * #PSA_KEY_TYPE_PEPPER. + */ +#define PSA_KEY_DERIVATION_INPUT_SALT ((psa_key_derivation_step_t) 0x0202) + +/** An information string for key derivation. + * + * This should be a direct input. + * It can also be a key of type #PSA_KEY_TYPE_RAW_DATA. + */ +#define PSA_KEY_DERIVATION_INPUT_INFO ((psa_key_derivation_step_t) 0x0203) + +/** A seed for key derivation. + * + * This should be a direct input. + * It can also be a key of type #PSA_KEY_TYPE_RAW_DATA. + */ +#define PSA_KEY_DERIVATION_INPUT_SEED ((psa_key_derivation_step_t) 0x0204) + +/** A cost parameter for password hashing / key stretching. + * + * This must be a direct input, passed to psa_key_derivation_input_integer(). + */ +#define PSA_KEY_DERIVATION_INPUT_COST ((psa_key_derivation_step_t) 0x0205) + +/**@}*/ + +/** \defgroup helper_macros Helper macros + * @{ + */ + +/* Helper macros */ + +/** Check if two AEAD algorithm identifiers refer to the same AEAD algorithm + * regardless of the tag length they encode. + * + * \param aead_alg_1 An AEAD algorithm identifier. + * \param aead_alg_2 An AEAD algorithm identifier. + * + * \return 1 if both identifiers refer to the same AEAD algorithm, + * 0 otherwise. + * Unspecified if neither \p aead_alg_1 nor \p aead_alg_2 are + * a supported AEAD algorithm. + */ +#define MBEDTLS_PSA_ALG_AEAD_EQUAL(aead_alg_1, aead_alg_2) \ + (!(((aead_alg_1) ^ (aead_alg_2)) & \ + ~(PSA_ALG_AEAD_TAG_LENGTH_MASK | PSA_ALG_AEAD_AT_LEAST_THIS_LENGTH_FLAG))) + +/**@}*/ + +/**@}*/ + +/** \defgroup interruptible Interruptible operations + * @{ + */ + +/** Maximum value for use with \c psa_interruptible_set_max_ops() to determine + * the maximum number of ops allowed to be executed by an interruptible + * function in a single call. + */ +#define PSA_INTERRUPTIBLE_MAX_OPS_UNLIMITED UINT32_MAX + +/**@}*/ + +#endif /* PSA_CRYPTO_VALUES_H */ diff --git a/nrfdemo/build/tfm/api_ns/interface/include/psa/error.h b/nrfdemo/build/tfm/api_ns/interface/include/psa/error.h new file mode 100644 index 0000000..fee8c99 --- /dev/null +++ b/nrfdemo/build/tfm/api_ns/interface/include/psa/error.h @@ -0,0 +1,60 @@ +/* + * Copyright (c) 2019-2022, Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: BSD-3-Clause + * + */ + +/** + * \file psa/error.h + * \brief Standard error codes for the SPM and RoT Services + */ + +#ifndef __PSA_ERROR_H__ +#define __PSA_ERROR_H__ + +#include <stdint.h> + +#ifdef __cplusplus +extern "C" { +#endif + +/* If #PSA_SUCCESS is already defined, it means that #psa_status_t + * is also defined in an external header, so prevent its multiple + * definition. + */ +#ifndef PSA_SUCCESS +typedef int32_t psa_status_t; +#endif + +#define PSA_SUCCESS ((psa_status_t)0) + +#define PSA_ERROR_PROGRAMMER_ERROR ((psa_status_t)-129) +#define PSA_ERROR_CONNECTION_REFUSED ((psa_status_t)-130) +#define PSA_ERROR_CONNECTION_BUSY ((psa_status_t)-131) +#define PSA_ERROR_GENERIC_ERROR ((psa_status_t)-132) +#define PSA_ERROR_NOT_PERMITTED ((psa_status_t)-133) +#define PSA_ERROR_NOT_SUPPORTED ((psa_status_t)-134) +#define PSA_ERROR_INVALID_ARGUMENT ((psa_status_t)-135) +#define PSA_ERROR_INVALID_HANDLE ((psa_status_t)-136) +#define PSA_ERROR_BAD_STATE ((psa_status_t)-137) +#define PSA_ERROR_BUFFER_TOO_SMALL ((psa_status_t)-138) +#define PSA_ERROR_ALREADY_EXISTS ((psa_status_t)-139) +#define PSA_ERROR_DOES_NOT_EXIST ((psa_status_t)-140) +#define PSA_ERROR_INSUFFICIENT_MEMORY ((psa_status_t)-141) +#define PSA_ERROR_INSUFFICIENT_STORAGE ((psa_status_t)-142) +#define PSA_ERROR_INSUFFICIENT_DATA ((psa_status_t)-143) +#define PSA_ERROR_SERVICE_FAILURE ((psa_status_t)-144) +#define PSA_ERROR_COMMUNICATION_FAILURE ((psa_status_t)-145) +#define PSA_ERROR_STORAGE_FAILURE ((psa_status_t)-146) +#define PSA_ERROR_HARDWARE_FAILURE ((psa_status_t)-147) +#define PSA_ERROR_INVALID_SIGNATURE ((psa_status_t)-149) +#define PSA_ERROR_DEPENDENCY_NEEDED ((psa_status_t)-156) +#define PSA_ERROR_FLASH_ABUSE ((psa_status_t)-160) +#define PSA_ERROR_INSUFFICIENT_POWER ((psa_status_t)-161) + +#ifdef __cplusplus +} +#endif + +#endif /* __PSA_ERROR_H__ */ diff --git a/nrfdemo/build/tfm/api_ns/interface/include/psa/framework_feature.h b/nrfdemo/build/tfm/api_ns/interface/include/psa/framework_feature.h new file mode 100644 index 0000000..bb9436e --- /dev/null +++ b/nrfdemo/build/tfm/api_ns/interface/include/psa/framework_feature.h @@ -0,0 +1,14 @@ +/* + * Copyright (c) 2021, Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: BSD-3-Clause + * + */ + +#ifndef __PSA_FRAMEWORK_FEATURE_H__ +#define __PSA_FRAMEWORK_FEATURE_H__ + +#define PSA_FRAMEWORK_ISOLATION_LEVEL 1 +#define PSA_FRAMEWORK_HAS_MM_IOVEC 0 + +#endif /* __PSA_FRAMEWORK_FEATURE_H__ */ diff --git a/nrfdemo/build/tfm/api_ns/interface/include/psa_manifest/sid.h b/nrfdemo/build/tfm/api_ns/interface/include/psa_manifest/sid.h new file mode 100644 index 0000000..203ab4e --- /dev/null +++ b/nrfdemo/build/tfm/api_ns/interface/include/psa_manifest/sid.h @@ -0,0 +1,31 @@ +/* + * Copyright (c) 2019-2022, Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: BSD-3-Clause + * + */ + +/*********** WARNING: This is an auto-generated file. Do not edit! ***********/ + +#ifndef __PSA_MANIFEST_SID_H__ +#define __PSA_MANIFEST_SID_H__ + +#ifdef __cplusplus +extern "C" { +#endif + +/******** TFM_SP_CRYPTO ********/ +#define TFM_CRYPTO_SID (0x00000080U) +#define TFM_CRYPTO_VERSION (1U) +#define TFM_CRYPTO_HANDLE (0x40000100U) + +/******** TFM_SP_PLATFORM ********/ +#define TFM_PLATFORM_SERVICE_SID (0x00000040U) +#define TFM_PLATFORM_SERVICE_VERSION (1U) +#define TFM_PLATFORM_SERVICE_HANDLE (0x40000105U) + +#ifdef __cplusplus +} +#endif + +#endif /* __PSA_MANIFEST_SID_H__ */ diff --git a/nrfdemo/build/tfm/api_ns/interface/include/tfm_crypto_defs.h b/nrfdemo/build/tfm/api_ns/interface/include/tfm_crypto_defs.h new file mode 100644 index 0000000..4b3cfca --- /dev/null +++ b/nrfdemo/build/tfm/api_ns/interface/include/tfm_crypto_defs.h @@ -0,0 +1,303 @@ +/* + * Copyright (c) 2018-2022, Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: BSD-3-Clause + * + */ + +#ifndef __TFM_CRYPTO_DEFS_H__ +#define __TFM_CRYPTO_DEFS_H__ + +#ifdef __cplusplus +extern "C" { +#endif + +#include <stdint.h> +#include "psa/crypto.h" +#ifdef PLATFORM_DEFAULT_CRYPTO_KEYS +#include "crypto_keys/tfm_builtin_key_ids.h" +#else +#include "tfm_builtin_key_ids.h" +#endif /* PLATFORM_DEFAULT_CRYPTO_KEYS */ + +/** + * \brief The maximum supported length of a nonce through the TF-M + * interfaces + */ +#define TFM_CRYPTO_MAX_NONCE_LENGTH (16u) + +/** + * \brief This type is used to overcome a limitation in the number of maximum + * IOVECs that can be used especially in psa_aead_encrypt and + * psa_aead_decrypt. By using this type we pack the nonce and the actual + * nonce_length at part of the same structure + */ +struct tfm_crypto_aead_pack_input { + uint8_t nonce[TFM_CRYPTO_MAX_NONCE_LENGTH]; + uint32_t nonce_length; +}; + +/** + * \brief Structure used to pack non-pointer types in a call to PSA Crypto APIs + * + */ +struct tfm_crypto_pack_iovec { + psa_key_id_t key_id; /*!< Key id */ + psa_algorithm_t alg; /*!< Algorithm */ + uint32_t op_handle; /*!< Frontend context handle associated to a + * multipart operation + */ + size_t ad_length; /*!< Additional Data length for multipart AEAD */ + size_t plaintext_length; /*!< Plaintext length for multipart AEAD */ + + struct tfm_crypto_aead_pack_input aead_in; /*!< Packs AEAD-related inputs */ + + uint16_t function_id; /*!< Used to identify the function in the + * API dispatcher to the service backend + * See tfm_crypto_func_sid for detail + */ + uint16_t step; /*!< Key derivation step */ + psa_pake_role_t role; /*!< PAKE role */ + union { + size_t capacity; /*!< Key derivation capacity */ + uint64_t value; /*!< Key derivation integer for update*/ + }; +}; + +/** + * \brief Type associated to the group of a function encoding. There can be + * nine groups (Random, Key management, Hash, MAC, Cipher, AEAD, + * Asym sign, Asym encrypt, Key derivation). + */ +enum tfm_crypto_group_id { + TFM_CRYPTO_GROUP_ID_RANDOM = 0x0, + TFM_CRYPTO_GROUP_ID_KEY_MANAGEMENT, + TFM_CRYPTO_GROUP_ID_HASH, + TFM_CRYPTO_GROUP_ID_MAC, + TFM_CRYPTO_GROUP_ID_CIPHER, + TFM_CRYPTO_GROUP_ID_AEAD, + TFM_CRYPTO_GROUP_ID_ASYM_SIGN, + TFM_CRYPTO_GROUP_ID_ASYM_ENCRYPT, + TFM_CRYPTO_GROUP_ID_KEY_DERIVATION, + TFM_CRYPTO_GROUP_ID_PAKE, +}; + +/* Set of X macros describing each of the available PSA Crypto APIs */ +#define KEY_MANAGEMENT_FUNCS \ + X(TFM_CRYPTO_GET_KEY_ATTRIBUTES) \ + X(TFM_CRYPTO_RESET_KEY_ATTRIBUTES) \ + X(TFM_CRYPTO_OPEN_KEY) \ + X(TFM_CRYPTO_CLOSE_KEY) \ + X(TFM_CRYPTO_IMPORT_KEY) \ + X(TFM_CRYPTO_DESTROY_KEY) \ + X(TFM_CRYPTO_EXPORT_KEY) \ + X(TFM_CRYPTO_EXPORT_PUBLIC_KEY) \ + X(TFM_CRYPTO_PURGE_KEY) \ + X(TFM_CRYPTO_COPY_KEY) \ + X(TFM_CRYPTO_GENERATE_KEY) + +#define HASH_FUNCS \ + X(TFM_CRYPTO_HASH_COMPUTE) \ + X(TFM_CRYPTO_HASH_COMPARE) \ + X(TFM_CRYPTO_HASH_SETUP) \ + X(TFM_CRYPTO_HASH_UPDATE) \ + X(TFM_CRYPTO_HASH_CLONE) \ + X(TFM_CRYPTO_HASH_FINISH) \ + X(TFM_CRYPTO_HASH_VERIFY) \ + X(TFM_CRYPTO_HASH_ABORT) + +#define MAC_FUNCS \ + X(TFM_CRYPTO_MAC_COMPUTE) \ + X(TFM_CRYPTO_MAC_VERIFY) \ + X(TFM_CRYPTO_MAC_SIGN_SETUP) \ + X(TFM_CRYPTO_MAC_VERIFY_SETUP) \ + X(TFM_CRYPTO_MAC_UPDATE) \ + X(TFM_CRYPTO_MAC_SIGN_FINISH) \ + X(TFM_CRYPTO_MAC_VERIFY_FINISH) \ + X(TFM_CRYPTO_MAC_ABORT) + +#define CIPHER_FUNCS \ + X(TFM_CRYPTO_CIPHER_ENCRYPT) \ + X(TFM_CRYPTO_CIPHER_DECRYPT) \ + X(TFM_CRYPTO_CIPHER_ENCRYPT_SETUP) \ + X(TFM_CRYPTO_CIPHER_DECRYPT_SETUP) \ + X(TFM_CRYPTO_CIPHER_GENERATE_IV) \ + X(TFM_CRYPTO_CIPHER_SET_IV) \ + X(TFM_CRYPTO_CIPHER_UPDATE) \ + X(TFM_CRYPTO_CIPHER_FINISH) \ + X(TFM_CRYPTO_CIPHER_ABORT) + +#define AEAD_FUNCS \ + X(TFM_CRYPTO_AEAD_ENCRYPT) \ + X(TFM_CRYPTO_AEAD_DECRYPT) \ + X(TFM_CRYPTO_AEAD_ENCRYPT_SETUP) \ + X(TFM_CRYPTO_AEAD_DECRYPT_SETUP) \ + X(TFM_CRYPTO_AEAD_GENERATE_NONCE) \ + X(TFM_CRYPTO_AEAD_SET_NONCE) \ + X(TFM_CRYPTO_AEAD_SET_LENGTHS) \ + X(TFM_CRYPTO_AEAD_UPDATE_AD) \ + X(TFM_CRYPTO_AEAD_UPDATE) \ + X(TFM_CRYPTO_AEAD_FINISH) \ + X(TFM_CRYPTO_AEAD_VERIFY) \ + X(TFM_CRYPTO_AEAD_ABORT) + +#define ASYMMETRIC_SIGN_FUNCS \ + X(TFM_CRYPTO_ASYMMETRIC_SIGN_MESSAGE) \ + X(TFM_CRYPTO_ASYMMETRIC_VERIFY_MESSAGE) \ + X(TFM_CRYPTO_ASYMMETRIC_SIGN_HASH) \ + X(TFM_CRYPTO_ASYMMETRIC_VERIFY_HASH) + +#define AYSMMETRIC_ENCRYPT_FUNCS \ + X(TFM_CRYPTO_ASYMMETRIC_ENCRYPT) \ + X(TFM_CRYPTO_ASYMMETRIC_DECRYPT) + +#define KEY_DERIVATION_FUNCS \ + X(TFM_CRYPTO_RAW_KEY_AGREEMENT) \ + X(TFM_CRYPTO_KEY_DERIVATION_SETUP) \ + X(TFM_CRYPTO_KEY_DERIVATION_GET_CAPACITY) \ + X(TFM_CRYPTO_KEY_DERIVATION_SET_CAPACITY) \ + X(TFM_CRYPTO_KEY_DERIVATION_INPUT_BYTES) \ + X(TFM_CRYPTO_KEY_DERIVATION_INPUT_KEY) \ + X(TFM_CRYPTO_KEY_DERIVATION_INPUT_INTEGER) \ + X(TFM_CRYPTO_KEY_DERIVATION_KEY_AGREEMENT) \ + X(TFM_CRYPTO_KEY_DERIVATION_OUTPUT_BYTES) \ + X(TFM_CRYPTO_KEY_DERIVATION_OUTPUT_KEY) \ + X(TFM_CRYPTO_KEY_DERIVATION_ABORT) + +#define RANDOM_FUNCS \ + X(TFM_CRYPTO_GENERATE_RANDOM) + +#define PAKE_FUNCS \ + X(TFM_CRYPTO_PAKE_SETUP) \ + X(TFM_CRYPTO_PAKE_SET_ROLE) \ + X(TFM_CRYPTO_PAKE_SET_USER) \ + X(TFM_CRYPTO_PAKE_SET_PEER) \ + X(TFM_CRYPTO_PAKE_SET_CONTEXT) \ + X(TFM_CRYPTO_PAKE_OUTPUT) \ + X(TFM_CRYPTO_PAKE_INPUT) \ + X(TFM_CRYPTO_PAKE_GET_SHARED_KEY) \ + X(TFM_CRYPTO_PAKE_ABORT) + +/** + * \brief Define function IDs in each group. The function ID will be encoded into + * tfm_crypto_func_sid below. Each group is defined as a dedicated enum + */ +#define X(func_id) func_id, +enum tfm_crypto_key_management_func_id { + KEY_MANAGEMENT_FUNCS +}; +enum tfm_crypto_hash_func_id { + HASH_FUNCS +}; +enum tfm_crypto_mac_func_id { + MAC_FUNCS +}; +enum tfm_crypto_cipher_func_id { + CIPHER_FUNCS +}; +enum tfm_crypto_aead_func_id { + AEAD_FUNCS +}; +enum tfm_crypto_asym_sign_func_id { + ASYMMETRIC_SIGN_FUNCS +}; +enum tfm_crypto_asym_encrypt_func_id { + AYSMMETRIC_ENCRYPT_FUNCS +}; +enum tfm_crypto_key_derivation_func_id { + KEY_DERIVATION_FUNCS +}; +enum tfm_crypto_random_func_id { + RANDOM_FUNCS +}; +enum tfm_crypto_pake_func_id { + PAKE_FUNCS +}; +#undef X + +/** + * \brief This macro is used to encode a function ID in a 16-bit value as the + * top 8 bits towards the MSB + */ +#define FUNC_ID(func_id) (((func_id) & 0xFF) << 8) + +/** + * \brief This macro is used to extract the group_id from an encoded function_id + * by accessing the low 8 bits towards the LSB + */ +#define TFM_CRYPTO_GET_GROUP_ID(_function_id) \ + ((enum tfm_crypto_group_id)((_function_id) & 0xFF)) +/** + * \brief This type defines numerical progressive values identifying a function API + * exposed through the interfaces (S or NS). It's used to dispatch the requests + * from S/NS to the corresponding API implementation in the Crypto service backend. + * + * \note Each function SID is encoded as uint16_t. + * +-----------+-----------+ + * | Func ID | Group ID | + * +-----------+-----------+ + * (MSB)15 8 7 0(LSB) + * + * where Func ID is defined in each group tfm_crypto_*_func_id enum above and Group ID + * is defined in \ref tfm_crypto_group_id. + */ +enum tfm_crypto_func_sid { + +#define X(func_id) func_id ## _SID = (uint16_t)((FUNC_ID(func_id)) | \ + (TFM_CRYPTO_GROUP_ID_KEY_MANAGEMENT & 0xFF)), + + KEY_MANAGEMENT_FUNCS + +#undef X +#define X(func_id) func_id ## _SID = (uint16_t)((FUNC_ID(func_id)) | \ + (TFM_CRYPTO_GROUP_ID_HASH & 0xFF)), + HASH_FUNCS + +#undef X +#define X(func_id) func_id ## _SID = (uint16_t)((FUNC_ID(func_id)) | \ + (TFM_CRYPTO_GROUP_ID_MAC & 0xFF)), + MAC_FUNCS + +#undef X +#define X(func_id) func_id ## _SID = (uint16_t)((FUNC_ID(func_id)) | \ + (TFM_CRYPTO_GROUP_ID_CIPHER & 0xFF)), + CIPHER_FUNCS + +#undef X +#define X(func_id) func_id ## _SID = (uint16_t)((FUNC_ID(func_id)) | \ + (TFM_CRYPTO_GROUP_ID_AEAD & 0xFF)), + AEAD_FUNCS + +#undef X +#define X(func_id) func_id ## _SID = (uint16_t)((FUNC_ID(func_id)) | \ + (TFM_CRYPTO_GROUP_ID_ASYM_SIGN & 0xFF)), + ASYMMETRIC_SIGN_FUNCS + +#undef X +#define X(func_id) func_id ## _SID = (uint16_t)((FUNC_ID(func_id)) | \ + (TFM_CRYPTO_GROUP_ID_ASYM_ENCRYPT & 0xFF)), + AYSMMETRIC_ENCRYPT_FUNCS + +#undef X +#define X(func_id) func_id ## _SID = (uint16_t)((FUNC_ID(func_id)) | \ + (TFM_CRYPTO_GROUP_ID_KEY_DERIVATION & 0xFF)), + KEY_DERIVATION_FUNCS + +#undef X +#define X(func_id) func_id ## _SID = (uint16_t)((FUNC_ID(func_id)) | \ + (TFM_CRYPTO_GROUP_ID_RANDOM & 0xFF)), + RANDOM_FUNCS + +#undef X +#define X(func_id) func_id ## _SID = (uint16_t)((FUNC_ID(func_id)) | \ + (TFM_CRYPTO_GROUP_ID_PAKE & 0xFF)), + PAKE_FUNCS + +}; +#undef X + +#ifdef __cplusplus +} +#endif + +#endif /* __TFM_CRYPTO_DEFS_H__ */ diff --git a/nrfdemo/build/tfm/api_ns/interface/include/tfm_ioctl_core_api.h b/nrfdemo/build/tfm/api_ns/interface/include/tfm_ioctl_core_api.h new file mode 100644 index 0000000..df3c8d6 --- /dev/null +++ b/nrfdemo/build/tfm/api_ns/interface/include/tfm_ioctl_core_api.h @@ -0,0 +1,120 @@ +/* + * Copyright (c) 2021 Nordic Semiconductor ASA + * + * SPDX-License-Identifier: BSD-3-Clause + */ + +/** @file + * @brief TFM IOCTL API header. + */ + + +#ifndef TFM_IOCTL_CORE_API_H__ +#define TFM_IOCTL_CORE_API_H__ + +/** + * @defgroup tfm_ioctl_api TFM IOCTL API + * @{ + * + */ + +#include <limits.h> +#include <tfm_platform_api.h> + +#ifdef __cplusplus +extern "C" { +#endif + +/** @brief Supported request types. + */ +enum tfm_platform_ioctl_core_reqest_types_t { + TFM_PLATFORM_IOCTL_READ_SERVICE, + TFM_PLATFORM_IOCTL_GPIO_SERVICE, + + /* Last core service, start platform specific from this value. */ + TFM_PLATFORM_IOCTL_CORE_LAST +}; + +/** @brief Argument list for each platform read service. + */ +struct tfm_read_service_args_t { + void *destination; + uint32_t addr; + size_t len; +}; + + +/** @brief Output list for each read platform service + */ +struct tfm_read_service_out_t { + uint32_t result; +}; + +enum tfm_gpio_service_type { + /** Select which MCU / Subsystem controls the pin */ + TFM_GPIO_SERVICE_TYPE_PIN_MCU_SELECT = 0, +}; + +/** @brief Arguments for selecting the MCU to control a GPIO pin. */ +struct tfm_gpio_service_args_mcu_select { + uint32_t pin_number; + uint32_t mcu; +}; + +/** @brief Argument list for each platform GPIO service */ +struct tfm_gpio_service_args { + uint32_t type; + union { + struct tfm_gpio_service_args_mcu_select mcu_select; + }; +}; + +/** @brief Output list for each GPIO platform service + */ +struct tfm_gpio_service_out { + uint32_t result; +}; + +/** + * @brief Perform a read operation. + * + * @param[out] destination Pointer where read result is stored + * @param[in] addr Address to read from + * @param[in] len Number of bytes to read + * @param[out] result Result of operation + * + * @return Returns values as specified by the tfm_platform_err_t + */ +enum tfm_platform_err_t tfm_platform_mem_read(void *destination, uint32_t addr, + size_t len, uint32_t *result); + +/** @brief Represents an accepted read range. + */ +struct tfm_read_service_range { + uint32_t start; + size_t size; +}; + +/** + * @brief Perform a GPIO MCU select operation. + * + * @param pin_number Pin_number. + * @param mcu MCU to control the pin, use nrf_gpio_pin_sel_t values. + + * @param[out] result Result of operation + * + * @return Returns values as specified by the tfm_platform_err_t + */ +enum tfm_platform_err_t tfm_platform_gpio_pin_mcu_select(uint32_t pin_number, uint32_t mcu, + uint32_t *result); + + +#ifdef __cplusplus +} +#endif + +/** + * @} + */ + +#endif /* TFM_IOCTL_CORE_API_H__ */ diff --git a/nrfdemo/build/tfm/api_ns/interface/include/tfm_ns_client_ext.h b/nrfdemo/build/tfm/api_ns/interface/include/tfm_ns_client_ext.h new file mode 100644 index 0000000..b6e944c --- /dev/null +++ b/nrfdemo/build/tfm/api_ns/interface/include/tfm_ns_client_ext.h @@ -0,0 +1,109 @@ +/* + * Copyright (c) 2021, Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: BSD-3-Clause + * + */ + +#ifndef __TFM_NS_CLIENT_EXT_H__ +#define __TFM_NS_CLIENT_EXT_H__ + +#ifdef __cplusplus +extern "C" { +#endif + +#include <stdint.h> + +#define TFM_NS_CLIENT_INVALID_TOKEN 0xFFFFFFFF + +/* TF-M NSID Error code */ +#define TFM_NS_CLIENT_ERR_SUCCESS 0x0 +#define TFM_NS_CLIENT_ERR_INVALID_TOKEN 0x1 +#define TFM_NS_CLIENT_ERR_INVALID_NSID 0x2 +#define TFM_NS_CLIENT_ERR_INVALID_ACCESS 0x3 + +/** + * \brief Initialize the non-secure client extension + * + * \details This function should be called before any other non-secure client + * APIs. It gives NSPE the opportunity to initialize the non-secure + * client extension in TF-M. Also, NSPE can get the number of allocated + * non-secure client context slots in the return value. That is useful + * if NSPE wants to decide the group (context) assignment at runtime. + * + * \param[in] ctx_requested The number of non-secure context requested from the + * NS entity. If request maximum available context, then set it to 0. + * + * \return Returns the number of non-secure context allocated to the NS entity. + * The allocated context number <= maximum supported context number. + * If the initialization is failed, then 0 is returned. + */ +uint32_t tfm_nsce_init(uint32_t ctx_requested); + +/** + * \brief Acquire the context for a non-secure client + * + * \details This function should be called before a non-secure client calling + * the PSA API into TF-M. It is to request the allocation of the + * context for the upcoming service call from that non-secure client. + * The non-secure clients in one group share the same context. + * The thread ID is used to identify the different non-secure clients. + * + * \param[in] group_id The group ID of the non-secure client + * \param[in] thread_id The thread ID of the non-secure client + * + * \return Returns the token of the allocated context. 0xFFFFFFFF means the + * allocation failed and the token is invalid. + */ +uint32_t tfm_nsce_acquire_ctx(uint8_t group_id, uint8_t thread_id); + +/** + * \brief Release the context for the non-secure client + * + * \details This function should be called when a non-secure client is going to + * be terminated or will not call TF-M secure services in the future. + * It is to release the context allocated for the calling non-secure + * client. If the calling non-secure client is the only thread in the + * group, then the context will be deallocated. Otherwise, the context + * will still be taken for the other threads in the group. + * + * \param[in] token The token returned by tfm_nsce_acquire_ctx + * + * \return Returns the error code. + */ +uint32_t tfm_nsce_release_ctx(uint32_t token); + +/** + * \brief Load the context for the non-secure client + * + * \details This function should be called when a non-secure client is going to + * be scheduled in at the non-secure side. + * The caller is usually the scheduler of the RTOS. + * The non-secure client ID is managed by the non-secure world and + * passed to TF-M as the input parameter of TF-M. + * + * \param[in] token The token returned by tfm_nsce_acquire_ctx + * \param[in] nsid The non-secure client ID for this client + * + * \return Returns the error code. + */ +uint32_t tfm_nsce_load_ctx(uint32_t token, int32_t nsid); + +/** + * \brief Save the context for the non-secure client + * + * \details This function should be called when a non-secure client is going to + * be scheduled out at the non-secure side. + * The caller is usually the scheduler of the RTOS. + * + * \param[in] token The token returned by tfm_nsce_acquire_ctx + * + * \return Returns the error code. + */ +uint32_t tfm_nsce_save_ctx(uint32_t token); + +#ifdef __cplusplus +} +#endif + +#endif /* __TFM_NS_CLIENT_EXT_H__ */ diff --git a/nrfdemo/build/tfm/api_ns/interface/include/tfm_ns_interface.h b/nrfdemo/build/tfm/api_ns/interface/include/tfm_ns_interface.h new file mode 100644 index 0000000..32a04c5 --- /dev/null +++ b/nrfdemo/build/tfm/api_ns/interface/include/tfm_ns_interface.h @@ -0,0 +1,66 @@ +/* + * Copyright (c) 2017-2021, Arm Limited. All rights reserved. + * Copyright (c) 2023 Cypress Semiconductor Corporation (an Infineon company) + * or an affiliate of Cypress Semiconductor Corporation. All rights reserved. + * + * SPDX-License-Identifier: BSD-3-Clause + * + */ +#ifndef __TFM_NS_INTERFACE_H__ +#define __TFM_NS_INTERFACE_H__ + +#ifdef __cplusplus +extern "C" { +#endif + +#include <stdint.h> +#include "tfm_veneers.h" + +typedef int32_t (*veneer_fn) (uint32_t arg0, uint32_t arg1, + uint32_t arg2, uint32_t arg3); + +/** + * \brief NS interface, veneer function dispatcher + * + * \details This function implements the dispatching mechanism for the + * desired veneer function, to be called with the parameters + * described from arg0 to arg3. + * + * \note NSPE can use default implementation of this function or implement + * this function according to NS specific implementation and actual + * usage scenario. + * + * \param[in] fn Function pointer to the veneer function desired + * \param[in] arg0 Argument 0 of fn + * \param[in] arg1 Argument 1 of fn + * \param[in] arg2 Argument 2 of fn + * \param[in] arg3 Argument 3 of fn + * + * \return Returns the same return value of the requested veneer function + * + * \note This API must ensure the return value is from the veneer function. + * Other unrecoverable errors must be considered as fatal error and should + * not return. + */ +int32_t tfm_ns_interface_dispatch(veneer_fn fn, + uint32_t arg0, uint32_t arg1, + uint32_t arg2, uint32_t arg3); + +/** + * \brief NS interface initialization function + * + * \details This function initializes TF-M NS interface. + * + * \note NSPE can use default implementation of this function or implement + * this function according to NS specific implementation and actual + * usage scenario. + * + * \return \ref OS_WRAPPER_SUCCESS on success or \ref OS_WRAPPER_ERROR on error + */ +uint32_t tfm_ns_interface_init(void); + +#ifdef __cplusplus +} +#endif + +#endif /* __TFM_NS_INTERFACE_H__ */ diff --git a/nrfdemo/build/tfm/api_ns/interface/include/tfm_platform_api.h b/nrfdemo/build/tfm/api_ns/interface/include/tfm_platform_api.h new file mode 100644 index 0000000..e925503 --- /dev/null +++ b/nrfdemo/build/tfm/api_ns/interface/include/tfm_platform_api.h @@ -0,0 +1,100 @@ +/* + * Copyright (c) 2018-2022, Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: BSD-3-Clause + * + */ + +#ifndef __TFM_PLATFORM_API__ +#define __TFM_PLATFORM_API__ + +#include <limits.h> +#include <stdbool.h> +#include <stdint.h> +#include "psa/client.h" + +#ifdef __cplusplus +extern "C" { +#endif + +/** + * \brief TFM secure partition platform API version + */ +#define TFM_PLATFORM_API_VERSION_MAJOR (0) +#define TFM_PLATFORM_API_VERSION_MINOR (3) + +#define TFM_PLATFORM_API_ID_NV_READ (1010) +#define TFM_PLATFORM_API_ID_NV_INCREMENT (1011) +#define TFM_PLATFORM_API_ID_SYSTEM_RESET (1012) +#define TFM_PLATFORM_API_ID_IOCTL (1013) + +/*! + * \enum tfm_platform_err_t + * + * \brief Platform service error types + * + */ +enum tfm_platform_err_t { + TFM_PLATFORM_ERR_SUCCESS = 0, + TFM_PLATFORM_ERR_SYSTEM_ERROR, + TFM_PLATFORM_ERR_INVALID_PARAM, + TFM_PLATFORM_ERR_NOT_SUPPORTED, + + /* Following entry is only to ensure the error code of int size */ + TFM_PLATFORM_ERR_FORCE_INT_SIZE = INT_MAX +}; + +typedef int32_t tfm_platform_ioctl_req_t; + +/*! + * \brief Resets the system. + * + * \return Returns values as specified by the \ref tfm_platform_err_t + */ +enum tfm_platform_err_t tfm_platform_system_reset(void); + +/*! + * \brief Performs a platform-specific service + * + * \param[in] request Request identifier (valid values vary + * based on the platform) + * \param[in] input Input buffer to the requested service (or NULL) + * \param[in,out] output Output buffer to the requested service (or NULL) + * + * \return Returns values as specified by the \ref tfm_platform_err_t + */ +enum tfm_platform_err_t tfm_platform_ioctl(tfm_platform_ioctl_req_t request, + psa_invec *input, + psa_outvec *output); + +/*! + * \brief Increments the given non-volatile (NV) counter by one + * + * \param[in] counter_id NV counter ID. + * + * \return TFM_PLATFORM_ERR_SUCCESS if the value is read correctly. Otherwise, + * it returns TFM_PLATFORM_ERR_SYSTEM_ERROR. + */ +enum tfm_platform_err_t +tfm_platform_nv_counter_increment(uint32_t counter_id); + +/*! + * \brief Reads the given non-volatile (NV) counter + * + * \param[in] counter_id NV counter ID. + * \param[in] size Size of the buffer to store NV counter value + * in bytes. + * \param[out] val Pointer to store the current NV counter value. + * + * \return TFM_PLATFORM_ERR_SUCCESS if the value is read correctly. Otherwise, + * it returns TFM_PLATFORM_ERR_SYSTEM_ERROR. + */ +enum tfm_platform_err_t +tfm_platform_nv_counter_read(uint32_t counter_id, + uint32_t size, uint8_t *val); + +#ifdef __cplusplus +} +#endif + +#endif /* __TFM_PLATFORM_API__ */ diff --git a/nrfdemo/build/tfm/api_ns/interface/include/tfm_psa_call_pack.h b/nrfdemo/build/tfm/api_ns/interface/include/tfm_psa_call_pack.h new file mode 100644 index 0000000..7cf62f8 --- /dev/null +++ b/nrfdemo/build/tfm/api_ns/interface/include/tfm_psa_call_pack.h @@ -0,0 +1,80 @@ +/* + * Copyright (c) 2021-2022, Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: BSD-3-Clause + * + */ + +#ifndef __TFM_PSA_CALL_PACK_H__ +#define __TFM_PSA_CALL_PACK_H__ + +#include "psa/client.h" + +#ifdef __cplusplus +extern "C" { +#endif + +/* + * 31 30-28 27 26-24 23-20 19 18-16 15-0 + * +------------+-----+------+-------+-----+-------+-------+------+ + * | NS vector | | NS | invec | | NS | outvec| type | + * | descriptor | Res | invec| number| Res | outvec| number| | + * +------------+-----+------+-------+-----+-------+-------+------+ + * + * Res: Reserved. + */ +#define TYPE_MASK 0xFFFFUL + +#define IN_LEN_OFFSET 24 +#define IN_LEN_MASK (0x7UL << IN_LEN_OFFSET) + +#define OUT_LEN_OFFSET 16 +#define OUT_LEN_MASK (0x7UL << OUT_LEN_OFFSET) + +/* + * NS_VEC_DESC_BIT is referenced by inline assembly, which does not + * support composited bit operations. So NS_VEC_DESC_BIT must be + * defined as a number. + */ +#define NS_VEC_DESC_BIT 0x80000000UL + +#define NS_INVEC_OFFSET 27 +#define NS_INVEC_BIT (1UL << NS_INVEC_OFFSET) +#define NS_OUTVEC_OFFSET 19 +#define NS_OUTVEC_BIT (1UL << NS_OUTVEC_OFFSET) + +#define PARAM_PACK(type, in_len, out_len) \ + ((((uint32_t)(type)) & TYPE_MASK) | \ + ((((uint32_t)(in_len)) << IN_LEN_OFFSET) & IN_LEN_MASK) | \ + ((((uint32_t)(out_len)) << OUT_LEN_OFFSET) & OUT_LEN_MASK)) + +#define PARAM_UNPACK_TYPE(ctrl_param) \ + ((int32_t)(int16_t)((ctrl_param) & TYPE_MASK)) + +#define PARAM_UNPACK_IN_LEN(ctrl_param) \ + ((size_t)(((ctrl_param) & IN_LEN_MASK) >> IN_LEN_OFFSET)) + +#define PARAM_UNPACK_OUT_LEN(ctrl_param) \ + ((size_t)(((ctrl_param) & OUT_LEN_MASK) >> OUT_LEN_OFFSET)) + +#define PARAM_SET_NS_VEC(ctrl_param) ((ctrl_param) | NS_VEC_DESC_BIT) +#define PARAM_IS_NS_VEC(ctrl_param) ((ctrl_param) & NS_VEC_DESC_BIT) + +#define PARAM_SET_NS_INVEC(ctrl_param) ((ctrl_param) | NS_INVEC_BIT) +#define PARAM_IS_NS_INVEC(ctrl_param) ((ctrl_param) & NS_INVEC_BIT) +#define PARAM_SET_NS_OUTVEC(ctrl_param) ((ctrl_param) | NS_OUTVEC_BIT) +#define PARAM_IS_NS_OUTVEC(ctrl_param) ((ctrl_param) & NS_OUTVEC_BIT) + +#define PARAM_HAS_IOVEC(ctrl_param) \ + ((ctrl_param) != (uint32_t)PARAM_UNPACK_TYPE(ctrl_param)) + +psa_status_t tfm_psa_call_pack(psa_handle_t handle, + uint32_t ctrl_param, + const psa_invec *in_vec, + psa_outvec *out_vec); + +#ifdef __cplusplus +} +#endif + +#endif /* __TFM_PSA_CALL_PACK_H__ */ diff --git a/nrfdemo/build/tfm/api_ns/interface/include/tfm_veneers.h b/nrfdemo/build/tfm/api_ns/interface/include/tfm_veneers.h new file mode 100644 index 0000000..24c4036 --- /dev/null +++ b/nrfdemo/build/tfm/api_ns/interface/include/tfm_veneers.h @@ -0,0 +1,75 @@ +/* + * Copyright (c) 2017-2022, Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: BSD-3-Clause + * + */ + +#ifndef __TFM_VENEERS_H__ +#define __TFM_VENEERS_H__ + +#include <stdint.h> +#include "psa/client.h" + +#ifdef __cplusplus +extern "C" { +#endif + +/********************* Secure function declarations ***************************/ + +/** + * \brief Retrieve the version of the PSA Framework API that is implemented. + * + * \return The version of the PSA Framework. + */ +uint32_t tfm_psa_framework_version_veneer(void); + +/** + * \brief Return version of secure function provided by secure binary. + * + * \param[in] sid ID of secure service. + * + * \return Version number of secure function. + */ +uint32_t tfm_psa_version_veneer(uint32_t sid); + +/** + * \brief Connect to secure function. + * + * \param[in] sid ID of secure service. + * \param[in] version Version of SF requested by client. + * + * \return Returns handle to connection. + */ +psa_handle_t tfm_psa_connect_veneer(uint32_t sid, uint32_t version); + +/** + * \brief Call a secure function referenced by a connection handle. + * + * \param[in] handle Handle to connection. + * \param[in] ctrl_param Parameters combined in uint32_t, + * includes request type, in_num and out_num. + * \param[in] in_vec Array of input \ref psa_invec structures. + * \param[in,out] out_vec Array of output \ref psa_outvec structures. + * + * \return Returns \ref psa_status_t status code. + */ +psa_status_t tfm_psa_call_veneer(psa_handle_t handle, + uint32_t ctrl_param, + const psa_invec *in_vec, + psa_outvec *out_vec); + +/** + * \brief Close connection to secure function referenced by a connection handle. + * + * \param[in] handle Handle to connection + */ +void tfm_psa_close_veneer(psa_handle_t handle); + +/***************** End Secure function declarations ***************************/ + +#ifdef __cplusplus +} +#endif + +#endif /* __TFM_VENEERS_H__ */ diff --git a/nrfdemo/build/tfm/api_ns/interface/lib/s_veneers.o b/nrfdemo/build/tfm/api_ns/interface/lib/s_veneers.o Binary files differnew file mode 100644 index 0000000..c4ae99b --- /dev/null +++ b/nrfdemo/build/tfm/api_ns/interface/lib/s_veneers.o diff --git a/nrfdemo/build/tfm/api_ns/interface/src/os_wrapper/tfm_ns_interface_bare_metal.c b/nrfdemo/build/tfm/api_ns/interface/src/os_wrapper/tfm_ns_interface_bare_metal.c new file mode 100644 index 0000000..01da8b8 --- /dev/null +++ b/nrfdemo/build/tfm/api_ns/interface/src/os_wrapper/tfm_ns_interface_bare_metal.c @@ -0,0 +1,23 @@ +/* + * Copyright (c) 2023 Cypress Semiconductor Corporation (an Infineon company) + * or an affiliate of Cypress Semiconductor Corporation. All rights reserved. + * + * SPDX-License-Identifier: BSD-3-Clause + * + */ + +/* This file provides implementation of TF-M NS os wrapper functions for the + * bare metal use case. + * + * \note This implementation does not provide multithread safety, so it + * shouldn't be used in RTOS environment. + */ + +#include "tfm_ns_interface.h" + +int32_t tfm_ns_interface_dispatch(veneer_fn fn, + uint32_t arg0, uint32_t arg1, + uint32_t arg2, uint32_t arg3) +{ + return fn(arg0, arg1, arg2, arg3); +} diff --git a/nrfdemo/build/tfm/api_ns/interface/src/os_wrapper/tfm_ns_interface_rtos.c b/nrfdemo/build/tfm/api_ns/interface/src/os_wrapper/tfm_ns_interface_rtos.c new file mode 100644 index 0000000..a1f7727 --- /dev/null +++ b/nrfdemo/build/tfm/api_ns/interface/src/os_wrapper/tfm_ns_interface_rtos.c @@ -0,0 +1,56 @@ +/* + * Copyright (c) 2017-2021, Arm Limited. All rights reserved. + * Copyright (c) 2023 Cypress Semiconductor Corporation (an Infineon company) + * or an affiliate of Cypress Semiconductor Corporation. All rights reserved. + * + * SPDX-License-Identifier: BSD-3-Clause + * + */ + +/* This file provides implementation of TF-M NS os wrapper functions for the + * RTOS use case. This implementation provides multithread safety, so it + * can be used in RTOS environment. + */ + +#include <stdint.h> + +#include "os_wrapper/mutex.h" + +#include "tfm_ns_interface.h" + +/** + * \brief the ns_lock ID + */ +static void *ns_lock_handle = NULL; + +int32_t tfm_ns_interface_dispatch(veneer_fn fn, + uint32_t arg0, uint32_t arg1, + uint32_t arg2, uint32_t arg3) +{ + int32_t result; + + /* TFM request protected by NS lock */ + while (os_wrapper_mutex_acquire(ns_lock_handle, OS_WRAPPER_WAIT_FOREVER) + != OS_WRAPPER_SUCCESS) { + } + + result = fn(arg0, arg1, arg2, arg3); + + while (os_wrapper_mutex_release(ns_lock_handle) != OS_WRAPPER_SUCCESS) { + } + + return result; +} + +uint32_t tfm_ns_interface_init(void) +{ + void *handle; + + handle = os_wrapper_mutex_create(); + if (!handle) { + return OS_WRAPPER_ERROR; + } + + ns_lock_handle = handle; + return OS_WRAPPER_SUCCESS; +} diff --git a/nrfdemo/build/tfm/api_ns/interface/src/tfm_crypto_api.c b/nrfdemo/build/tfm/api_ns/interface/src/tfm_crypto_api.c new file mode 100644 index 0000000..4dc7ea8 --- /dev/null +++ b/nrfdemo/build/tfm/api_ns/interface/src/tfm_crypto_api.c @@ -0,0 +1,1849 @@ +/* + * Copyright (c) 2018-2023, Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: BSD-3-Clause + * + */ + +#include "tfm_crypto_defs.h" +#include "psa/crypto.h" +#include "psa/client.h" +#include "psa_manifest/sid.h" + +#define API_DISPATCH(in_vec, out_vec) \ + psa_call(TFM_CRYPTO_HANDLE, PSA_IPC_CALL, \ + in_vec, IOVEC_LEN(in_vec), \ + out_vec, IOVEC_LEN(out_vec)) +#define API_DISPATCH_NO_OUTVEC(in_vec) \ + psa_call(TFM_CRYPTO_HANDLE, PSA_IPC_CALL, \ + in_vec, IOVEC_LEN(in_vec), \ + (psa_outvec *)NULL, 0) + +/*! + * \def CONFIG_TFM_CRYPTO_API_RENAME + * + * \brief By setting this to 1, system integrators can rename the symbols of the + * PSA Crypto APIs available in the TF-M interface. It allows flexibility + * for some integration setups where multiple providers of the PSA Crypto + * APIs are available at link time. Normally this configuration option + * should not be enabled when building the Secure interface because the + * secure partitions will just use the standard function names. By default + * it prepends the "tfm_crypto__" prefix. + * + * \note This config option is not available through the TF-M configuration as + * it's for NS applications and system integrators to enable. + */ + +/*! + * \def TFM_CRYPTO_API(ret, fun) + * + * \brief Define the function signature of a TF-M Crypto API with return + * type \a ret and PSA Crypto API function name \a fun + * + * \param ret return type associated to the API + * \param fun API name (e.g. a PSA Crypto API function name) + * + * \returns Function signature + */ + +#if CONFIG_TFM_CRYPTO_API_RENAME == 1 +#define TFM_CRYPTO_API(ret, fun) ret tfm_crypto__##fun +#else +#define TFM_CRYPTO_API(ret, fun) ret fun +#endif /* CONFIG_TFM_CRYPTO_API_RENAME */ + +TFM_CRYPTO_API(psa_status_t, psa_crypto_init)(void) +{ + /* Service init is performed during TFM boot up, + * so application level initialisation is empty + */ + return PSA_SUCCESS; +} + +TFM_CRYPTO_API(psa_status_t, psa_open_key)(psa_key_id_t id, + psa_key_id_t *key) +{ + const struct tfm_crypto_pack_iovec iov = { + .function_id = TFM_CRYPTO_OPEN_KEY_SID, + .key_id = id, + }; + psa_invec in_vec[] = { + {.base = &iov, .len = sizeof(struct tfm_crypto_pack_iovec)}, + }; + psa_outvec out_vec[] = { + {.base = key, .len = sizeof(psa_key_id_t)}, + }; + + return API_DISPATCH(in_vec, out_vec); +} + +TFM_CRYPTO_API(psa_status_t, psa_close_key)(psa_key_id_t key) +{ + const struct tfm_crypto_pack_iovec iov = { + .function_id = TFM_CRYPTO_CLOSE_KEY_SID, + .key_id = key, + }; + psa_invec in_vec[] = { + {.base = &iov, .len = sizeof(struct tfm_crypto_pack_iovec)}, + }; + + return API_DISPATCH_NO_OUTVEC(in_vec); +} + +TFM_CRYPTO_API(psa_status_t, psa_import_key)(const psa_key_attributes_t *attributes, + const uint8_t *data, + size_t data_length, + psa_key_id_t *key) +{ + struct tfm_crypto_pack_iovec iov = { + .function_id = TFM_CRYPTO_IMPORT_KEY_SID, + }; + psa_invec in_vec[] = { + {.base = &iov, .len = sizeof(struct tfm_crypto_pack_iovec)}, + {.base = attributes, .len = sizeof(psa_key_attributes_t)}, + {.base = data, .len = data_length} + }; + psa_outvec out_vec[] = { + {.base = key, .len = sizeof(psa_key_id_t)} + }; + + return API_DISPATCH(in_vec, out_vec); +} + +TFM_CRYPTO_API(psa_status_t, psa_destroy_key)(psa_key_id_t key) +{ + struct tfm_crypto_pack_iovec iov = { + .function_id = TFM_CRYPTO_DESTROY_KEY_SID, + .key_id = key, + }; + psa_invec in_vec[] = { + {.base = &iov, .len = sizeof(struct tfm_crypto_pack_iovec)}, + }; + + return API_DISPATCH_NO_OUTVEC(in_vec); +} + +TFM_CRYPTO_API(psa_status_t, psa_get_key_attributes)(psa_key_id_t key, + psa_key_attributes_t *attributes) +{ + struct tfm_crypto_pack_iovec iov = { + .function_id = TFM_CRYPTO_GET_KEY_ATTRIBUTES_SID, + .key_id = key, + }; + psa_invec in_vec[] = { + {.base = &iov, .len = sizeof(struct tfm_crypto_pack_iovec)}, + }; + psa_outvec out_vec[] = { + {.base = attributes, .len = sizeof(psa_key_attributes_t)}, + }; + + return API_DISPATCH(in_vec, out_vec); +} + +TFM_CRYPTO_API(void, psa_reset_key_attributes)(psa_key_attributes_t *attributes) +{ + struct tfm_crypto_pack_iovec iov = { + .function_id = TFM_CRYPTO_RESET_KEY_ATTRIBUTES_SID, + }; + psa_invec in_vec[] = { + {.base = &iov, .len = sizeof(struct tfm_crypto_pack_iovec)}, + }; + psa_outvec out_vec[] = { + {.base = attributes, .len = sizeof(psa_key_attributes_t)}, + }; + + (void)API_DISPATCH(in_vec, out_vec); + return; +} + +TFM_CRYPTO_API(psa_status_t, psa_export_key)(psa_key_id_t key, + uint8_t *data, + size_t data_size, + size_t *data_length) +{ + psa_status_t status; + struct tfm_crypto_pack_iovec iov = { + .function_id = TFM_CRYPTO_EXPORT_KEY_SID, + .key_id = key, + }; + psa_invec in_vec[] = { + {.base = &iov, .len = sizeof(struct tfm_crypto_pack_iovec)}, + }; + psa_outvec out_vec[] = { + {.base = data, .len = data_size} + }; + + status = API_DISPATCH(in_vec, out_vec); + + *data_length = out_vec[0].len; + + return status; +} + +TFM_CRYPTO_API(psa_status_t, psa_export_public_key)(psa_key_id_t key, + uint8_t *data, + size_t data_size, + size_t *data_length) +{ + psa_status_t status; + struct tfm_crypto_pack_iovec iov = { + .function_id = TFM_CRYPTO_EXPORT_PUBLIC_KEY_SID, + .key_id = key, + }; + + psa_invec in_vec[] = { + {.base = &iov, .len = sizeof(struct tfm_crypto_pack_iovec)}, + }; + psa_outvec out_vec[] = { + {.base = data, .len = data_size} + }; + + status = API_DISPATCH(in_vec, out_vec); + + *data_length = out_vec[0].len; + + return status; +} + +TFM_CRYPTO_API(psa_status_t, psa_purge_key)(psa_key_id_t key) +{ + struct tfm_crypto_pack_iovec iov = { + .function_id = TFM_CRYPTO_PURGE_KEY_SID, + .key_id = key, + }; + psa_invec in_vec[] = { + {.base = &iov, .len = sizeof(struct tfm_crypto_pack_iovec)}, + }; + + return API_DISPATCH_NO_OUTVEC(in_vec); +} + +TFM_CRYPTO_API(psa_status_t, psa_copy_key)(psa_key_id_t source_key, + const psa_key_attributes_t *attributes, + psa_key_id_t *target_key) +{ + struct tfm_crypto_pack_iovec iov = { + .function_id = TFM_CRYPTO_COPY_KEY_SID, + .key_id = source_key, + }; + + psa_invec in_vec[] = { + {.base = &iov, .len = sizeof(struct tfm_crypto_pack_iovec)}, + {.base = attributes, .len = sizeof(psa_key_attributes_t)}, + }; + + psa_outvec out_vec[] = { + {.base = target_key, .len = sizeof(psa_key_id_t)}, + }; + + return API_DISPATCH(in_vec, out_vec); +} + +TFM_CRYPTO_API(psa_status_t, psa_cipher_generate_iv)(psa_cipher_operation_t *operation, + unsigned char *iv, + size_t iv_size, + size_t *iv_length) +{ + psa_status_t status; + struct tfm_crypto_pack_iovec iov = { + .function_id = TFM_CRYPTO_CIPHER_GENERATE_IV_SID, + .op_handle = operation->handle, + }; + + psa_invec in_vec[] = { + {.base = &iov, .len = sizeof(struct tfm_crypto_pack_iovec)}, + }; + psa_outvec out_vec[] = { + {.base = iv, .len = iv_size}, + }; + + status = API_DISPATCH(in_vec, out_vec); + + *iv_length = out_vec[0].len; + + return status; +} + +TFM_CRYPTO_API(psa_status_t, psa_cipher_set_iv)(psa_cipher_operation_t *operation, + const unsigned char *iv, + size_t iv_length) +{ + struct tfm_crypto_pack_iovec iov = { + .function_id = TFM_CRYPTO_CIPHER_SET_IV_SID, + .op_handle = operation->handle, + }; + + psa_invec in_vec[] = { + {.base = &iov, .len = sizeof(struct tfm_crypto_pack_iovec)}, + {.base = iv, .len = iv_length}, + }; + + return API_DISPATCH_NO_OUTVEC(in_vec); +} + +TFM_CRYPTO_API(psa_status_t, psa_cipher_encrypt_setup)(psa_cipher_operation_t *operation, + psa_key_id_t key, + psa_algorithm_t alg) +{ + struct tfm_crypto_pack_iovec iov = { + .function_id = TFM_CRYPTO_CIPHER_ENCRYPT_SETUP_SID, + .key_id = key, + .alg = alg, + .op_handle = operation->handle, + }; + + psa_invec in_vec[] = { + {.base = &iov, .len = sizeof(struct tfm_crypto_pack_iovec)}, + }; + psa_outvec out_vec[] = { + {.base = &(operation->handle), .len = sizeof(uint32_t)}, + }; + + return API_DISPATCH(in_vec, out_vec); +} + +TFM_CRYPTO_API(psa_status_t, psa_cipher_decrypt_setup)(psa_cipher_operation_t *operation, + psa_key_id_t key, + psa_algorithm_t alg) +{ + struct tfm_crypto_pack_iovec iov = { + .function_id = TFM_CRYPTO_CIPHER_DECRYPT_SETUP_SID, + .key_id = key, + .alg = alg, + .op_handle = operation->handle, + }; + + psa_invec in_vec[] = { + {.base = &iov, .len = sizeof(struct tfm_crypto_pack_iovec)}, + }; + psa_outvec out_vec[] = { + {.base = &(operation->handle), .len = sizeof(uint32_t)}, + }; + + return API_DISPATCH(in_vec, out_vec); +} + +TFM_CRYPTO_API(psa_status_t, psa_cipher_update)(psa_cipher_operation_t *operation, + const uint8_t *input, + size_t input_length, + unsigned char *output, + size_t output_size, + size_t *output_length) +{ + psa_status_t status; + struct tfm_crypto_pack_iovec iov = { + .function_id = TFM_CRYPTO_CIPHER_UPDATE_SID, + .op_handle = operation->handle, + }; + + psa_invec in_vec[] = { + {.base = &iov, .len = sizeof(struct tfm_crypto_pack_iovec)}, + {.base = input, .len = input_length}, + }; + psa_outvec out_vec[] = { + {.base = output, .len = output_size} + }; + + status = API_DISPATCH(in_vec, out_vec); + + *output_length = out_vec[0].len; + + return status; +} + +TFM_CRYPTO_API(psa_status_t, psa_cipher_abort)(psa_cipher_operation_t *operation) +{ + struct tfm_crypto_pack_iovec iov = { + .function_id = TFM_CRYPTO_CIPHER_ABORT_SID, + .op_handle = operation->handle, + }; + + psa_invec in_vec[] = { + {.base = &iov, .len = sizeof(struct tfm_crypto_pack_iovec)}, + }; + psa_outvec out_vec[] = { + {.base = &(operation->handle), .len = sizeof(uint32_t)}, + }; + + return API_DISPATCH(in_vec, out_vec); +} + +TFM_CRYPTO_API(psa_status_t, psa_cipher_finish)(psa_cipher_operation_t *operation, + uint8_t *output, + size_t output_size, + size_t *output_length) +{ + psa_status_t status; + struct tfm_crypto_pack_iovec iov = { + .function_id = TFM_CRYPTO_CIPHER_FINISH_SID, + .op_handle = operation->handle, + }; + + psa_invec in_vec[] = { + {.base = &iov, .len = sizeof(struct tfm_crypto_pack_iovec)}, + }; + psa_outvec out_vec[] = { + {.base = &(operation->handle), .len = sizeof(uint32_t)}, + {.base = output, .len = output_size}, + }; + + status = API_DISPATCH(in_vec, out_vec); + + *output_length = out_vec[1].len; + + return status; +} + +TFM_CRYPTO_API(psa_status_t, psa_hash_setup)(psa_hash_operation_t *operation, + psa_algorithm_t alg) +{ + struct tfm_crypto_pack_iovec iov = { + .function_id = TFM_CRYPTO_HASH_SETUP_SID, + .alg = alg, + .op_handle = operation->handle, + }; + + psa_invec in_vec[] = { + {.base = &iov, .len = sizeof(struct tfm_crypto_pack_iovec)}, + }; + psa_outvec out_vec[] = { + {.base = &(operation->handle), .len = sizeof(uint32_t)}, + }; + + return API_DISPATCH(in_vec, out_vec); +} + +TFM_CRYPTO_API(psa_status_t, psa_hash_update)(psa_hash_operation_t *operation, + const uint8_t *input, + size_t input_length) +{ + struct tfm_crypto_pack_iovec iov = { + .function_id = TFM_CRYPTO_HASH_UPDATE_SID, + .op_handle = operation->handle, + }; + + psa_invec in_vec[] = { + {.base = &iov, .len = sizeof(struct tfm_crypto_pack_iovec)}, + {.base = input, .len = input_length}, + }; + + return API_DISPATCH_NO_OUTVEC(in_vec); +} + +TFM_CRYPTO_API(psa_status_t, psa_hash_finish)(psa_hash_operation_t *operation, + uint8_t *hash, + size_t hash_size, + size_t *hash_length) +{ + psa_status_t status; + struct tfm_crypto_pack_iovec iov = { + .function_id = TFM_CRYPTO_HASH_FINISH_SID, + .op_handle = operation->handle, + }; + + psa_invec in_vec[] = { + {.base = &iov, .len = sizeof(struct tfm_crypto_pack_iovec)}, + }; + psa_outvec out_vec[] = { + {.base = &(operation->handle), .len = sizeof(uint32_t)}, + {.base = hash, .len = hash_size}, + }; + + status = API_DISPATCH(in_vec, out_vec); + + *hash_length = out_vec[1].len; + + return status; +} + +TFM_CRYPTO_API(psa_status_t, psa_hash_verify)(psa_hash_operation_t *operation, + const uint8_t *hash, + size_t hash_length) +{ + struct tfm_crypto_pack_iovec iov = { + .function_id = TFM_CRYPTO_HASH_VERIFY_SID, + .op_handle = operation->handle, + }; + + psa_invec in_vec[] = { + {.base = &iov, .len = sizeof(struct tfm_crypto_pack_iovec)}, + {.base = hash, .len = hash_length}, + }; + psa_outvec out_vec[] = { + {.base = &(operation->handle), .len = sizeof(uint32_t)}, + }; + + return API_DISPATCH(in_vec, out_vec); +} + +TFM_CRYPTO_API(psa_status_t, psa_hash_abort)(psa_hash_operation_t *operation) +{ + struct tfm_crypto_pack_iovec iov = { + .function_id = TFM_CRYPTO_HASH_ABORT_SID, + .op_handle = operation->handle, + }; + + psa_invec in_vec[] = { + {.base = &iov, .len = sizeof(struct tfm_crypto_pack_iovec)}, + }; + psa_outvec out_vec[] = { + {.base = &(operation->handle), .len = sizeof(uint32_t)}, + }; + + return API_DISPATCH(in_vec, out_vec); +} + +TFM_CRYPTO_API(psa_status_t, psa_hash_clone)(const psa_hash_operation_t *source_operation, + psa_hash_operation_t *target_operation) +{ + struct tfm_crypto_pack_iovec iov = { + .function_id = TFM_CRYPTO_HASH_CLONE_SID, + .op_handle = source_operation->handle, + }; + + if (target_operation && (target_operation->handle != 0)) { + return PSA_ERROR_BAD_STATE; + } + + psa_invec in_vec[] = { + {.base = &iov, .len = sizeof(struct tfm_crypto_pack_iovec)}, + {.base = &(target_operation->handle), + .len = sizeof(target_operation->handle)}, + }; + psa_outvec out_vec[] = { + {.base = &(target_operation->handle), + .len = sizeof(target_operation->handle)}, + }; + + return API_DISPATCH(in_vec, out_vec); +} + +TFM_CRYPTO_API(psa_status_t, psa_hash_compute)(psa_algorithm_t alg, + const uint8_t *input, + size_t input_length, + uint8_t *hash, + size_t hash_size, + size_t *hash_length) +{ + psa_status_t status; + struct tfm_crypto_pack_iovec iov = { + .function_id = TFM_CRYPTO_HASH_COMPUTE_SID, + .alg = alg, + }; + + psa_invec in_vec[] = { + {.base = &iov, .len = sizeof(struct tfm_crypto_pack_iovec)}, + {.base = input, .len = input_length}, + }; + + psa_outvec out_vec[] = { + {.base = hash, .len = hash_size} + }; + + status = API_DISPATCH(in_vec, out_vec); + + *hash_length = out_vec[0].len; + + return status; +} + +TFM_CRYPTO_API(psa_status_t, psa_hash_compare)(psa_algorithm_t alg, + const uint8_t *input, + size_t input_length, + const uint8_t *hash, + size_t hash_length) +{ + struct tfm_crypto_pack_iovec iov = { + .function_id = TFM_CRYPTO_HASH_COMPARE_SID, + .alg = alg, + }; + + psa_invec in_vec[] = { + {.base = &iov, .len = sizeof(struct tfm_crypto_pack_iovec)}, + {.base = input, .len = input_length}, + {.base = hash, .len = hash_length}, + }; + + return API_DISPATCH_NO_OUTVEC(in_vec); +} + +TFM_CRYPTO_API(psa_status_t, psa_mac_sign_setup)(psa_mac_operation_t *operation, + psa_key_id_t key, + psa_algorithm_t alg) +{ + struct tfm_crypto_pack_iovec iov = { + .function_id = TFM_CRYPTO_MAC_SIGN_SETUP_SID, + .key_id = key, + .alg = alg, + .op_handle = operation->handle, + }; + + psa_invec in_vec[] = { + {.base = &iov, .len = sizeof(struct tfm_crypto_pack_iovec)}, + }; + psa_outvec out_vec[] = { + {.base = &(operation->handle), .len = sizeof(uint32_t)}, + }; + + return API_DISPATCH(in_vec, out_vec); +} + +TFM_CRYPTO_API(psa_status_t, psa_mac_verify_setup)(psa_mac_operation_t *operation, + psa_key_id_t key, + psa_algorithm_t alg) +{ + struct tfm_crypto_pack_iovec iov = { + .function_id = TFM_CRYPTO_MAC_VERIFY_SETUP_SID, + .key_id = key, + .alg = alg, + .op_handle = operation->handle, + }; + + psa_invec in_vec[] = { + {.base = &iov, .len = sizeof(struct tfm_crypto_pack_iovec)}, + }; + psa_outvec out_vec[] = { + {.base = &(operation->handle), .len = sizeof(uint32_t)}, + }; + + return API_DISPATCH(in_vec, out_vec); +} + +TFM_CRYPTO_API(psa_status_t, psa_mac_update)(psa_mac_operation_t *operation, + const uint8_t *input, + size_t input_length) +{ + struct tfm_crypto_pack_iovec iov = { + .function_id = TFM_CRYPTO_MAC_UPDATE_SID, + .op_handle = operation->handle, + }; + + psa_invec in_vec[] = { + {.base = &iov, .len = sizeof(struct tfm_crypto_pack_iovec)}, + {.base = input, .len = input_length}, + }; + + return API_DISPATCH_NO_OUTVEC(in_vec); +} + +TFM_CRYPTO_API(psa_status_t, psa_mac_sign_finish)(psa_mac_operation_t *operation, + uint8_t *mac, + size_t mac_size, + size_t *mac_length) +{ + psa_status_t status; + struct tfm_crypto_pack_iovec iov = { + .function_id = TFM_CRYPTO_MAC_SIGN_FINISH_SID, + .op_handle = operation->handle, + }; + + psa_invec in_vec[] = { + {.base = &iov, .len = sizeof(struct tfm_crypto_pack_iovec)}, + }; + psa_outvec out_vec[] = { + {.base = &(operation->handle), .len = sizeof(uint32_t)}, + {.base = mac, .len = mac_size}, + }; + + status = API_DISPATCH(in_vec, out_vec); + + *mac_length = out_vec[1].len; + + return status; +} + +TFM_CRYPTO_API(psa_status_t, psa_mac_verify_finish)(psa_mac_operation_t *operation, + const uint8_t *mac, + size_t mac_length) +{ + struct tfm_crypto_pack_iovec iov = { + .function_id = TFM_CRYPTO_MAC_VERIFY_FINISH_SID, + .op_handle = operation->handle, + }; + + psa_invec in_vec[] = { + {.base = &iov, .len = sizeof(struct tfm_crypto_pack_iovec)}, + {.base = mac, .len = mac_length}, + }; + psa_outvec out_vec[] = { + {.base = &(operation->handle), .len = sizeof(uint32_t)}, + }; + + return API_DISPATCH(in_vec, out_vec); +} + +TFM_CRYPTO_API(psa_status_t, psa_mac_abort)(psa_mac_operation_t *operation) +{ + struct tfm_crypto_pack_iovec iov = { + .function_id = TFM_CRYPTO_MAC_ABORT_SID, + .op_handle = operation->handle, + }; + + psa_invec in_vec[] = { + {.base = &iov, .len = sizeof(struct tfm_crypto_pack_iovec)}, + }; + psa_outvec out_vec[] = { + {.base = &(operation->handle), .len = sizeof(uint32_t)}, + }; + + return API_DISPATCH(in_vec, out_vec); +} + +TFM_CRYPTO_API(psa_status_t, psa_aead_encrypt)(psa_key_id_t key, + psa_algorithm_t alg, + const uint8_t *nonce, + size_t nonce_length, + const uint8_t *additional_data, + size_t additional_data_length, + const uint8_t *plaintext, + size_t plaintext_length, + uint8_t *ciphertext, + size_t ciphertext_size, + size_t *ciphertext_length) +{ + psa_status_t status; + struct tfm_crypto_pack_iovec iov = { + .function_id = TFM_CRYPTO_AEAD_ENCRYPT_SID, + .key_id = key, + .alg = alg, + .aead_in = {.nonce = {0}, .nonce_length = 0} + }; + + /* Sanitize the optional input */ + if ((additional_data == NULL) && (additional_data_length != 0)) { + return PSA_ERROR_INVALID_ARGUMENT; + } + + psa_invec in_vec[] = { + {.base = NULL, .len = 0}, + {.base = plaintext, .len = plaintext_length}, + {.base = additional_data, .len = additional_data_length}, + }; + psa_outvec out_vec[] = { + {.base = ciphertext, .len = ciphertext_size}, + }; + + if (nonce_length > TFM_CRYPTO_MAX_NONCE_LENGTH) { + return PSA_ERROR_INVALID_ARGUMENT; + } + + if (nonce != NULL) { + for (size_t idx = 0; idx < nonce_length; idx++) { + iov.aead_in.nonce[idx] = nonce[idx]; + } + iov.aead_in.nonce_length = nonce_length; + } + + in_vec[0].base = &iov; + in_vec[0].len = sizeof(struct tfm_crypto_pack_iovec); + + size_t in_len = IOVEC_LEN(in_vec); + + if (additional_data == NULL) { + in_len--; + } + status = psa_call(TFM_CRYPTO_HANDLE, PSA_IPC_CALL, in_vec, in_len, + out_vec, IOVEC_LEN(out_vec)); + + *ciphertext_length = out_vec[0].len; + + return status; +} + +TFM_CRYPTO_API(psa_status_t, psa_aead_decrypt)(psa_key_id_t key, + psa_algorithm_t alg, + const uint8_t *nonce, + size_t nonce_length, + const uint8_t *additional_data, + size_t additional_data_length, + const uint8_t *ciphertext, + size_t ciphertext_length, + uint8_t *plaintext, + size_t plaintext_size, + size_t *plaintext_length) +{ + psa_status_t status; + struct tfm_crypto_pack_iovec iov = { + .function_id = TFM_CRYPTO_AEAD_DECRYPT_SID, + .key_id = key, + .alg = alg, + .aead_in = {.nonce = {0}, .nonce_length = 0} + }; + + /* Sanitize the optional input */ + if ((additional_data == NULL) && (additional_data_length != 0)) { + return PSA_ERROR_INVALID_ARGUMENT; + } + + psa_invec in_vec[] = { + {.base = NULL, .len = 0}, + {.base = ciphertext, .len = ciphertext_length}, + {.base = additional_data, .len = additional_data_length}, + }; + psa_outvec out_vec[] = { + {.base = plaintext, .len = plaintext_size}, + }; + + if (nonce_length > TFM_CRYPTO_MAX_NONCE_LENGTH) { + return PSA_ERROR_INVALID_ARGUMENT; + } + + if (nonce != NULL) { + for (size_t idx = 0; idx < nonce_length; idx++) { + iov.aead_in.nonce[idx] = nonce[idx]; + } + iov.aead_in.nonce_length = nonce_length; + } + + in_vec[0].base = &iov; + in_vec[0].len = sizeof(struct tfm_crypto_pack_iovec); + + size_t in_len = IOVEC_LEN(in_vec); + + if (additional_data == NULL) { + in_len--; + } + status = psa_call(TFM_CRYPTO_HANDLE, PSA_IPC_CALL, in_vec, in_len, + out_vec, IOVEC_LEN(out_vec)); + + *plaintext_length = out_vec[0].len; + + return status; +} + +TFM_CRYPTO_API(psa_status_t, psa_aead_encrypt_setup)(psa_aead_operation_t *operation, + psa_key_id_t key, + psa_algorithm_t alg) +{ + psa_status_t status; + struct tfm_crypto_pack_iovec iov = { + .function_id = TFM_CRYPTO_AEAD_ENCRYPT_SETUP_SID, + .key_id = key, + .alg = alg, + .op_handle = operation->handle, + }; + + psa_invec in_vec[] = { + {.base = &iov, .len = sizeof(struct tfm_crypto_pack_iovec)} + }; + psa_outvec out_vec[] = { + {.base = &(operation->handle), .len = sizeof(uint32_t)} + }; + + status = API_DISPATCH(in_vec, out_vec); + return status; +} + +TFM_CRYPTO_API(psa_status_t, psa_aead_decrypt_setup)(psa_aead_operation_t *operation, + psa_key_id_t key, + psa_algorithm_t alg) +{ + psa_status_t status; + struct tfm_crypto_pack_iovec iov = { + .function_id = TFM_CRYPTO_AEAD_DECRYPT_SETUP_SID, + .key_id = key, + .alg = alg, + .op_handle = operation->handle, + }; + + psa_invec in_vec[] = { + {.base = &iov, .len = sizeof(struct tfm_crypto_pack_iovec)} + }; + psa_outvec out_vec[] = { + {.base = &(operation->handle), .len = sizeof(uint32_t)} + }; + + status = API_DISPATCH(in_vec, out_vec); + return status; +} + +TFM_CRYPTO_API(psa_status_t, psa_aead_generate_nonce)(psa_aead_operation_t *operation, + uint8_t *nonce, + size_t nonce_size, + size_t *nonce_length) +{ + psa_status_t status; + struct tfm_crypto_pack_iovec iov = { + .function_id = TFM_CRYPTO_AEAD_GENERATE_NONCE_SID, + .op_handle = operation->handle, + }; + + psa_invec in_vec[] = { + {.base = &iov, .len = sizeof(struct tfm_crypto_pack_iovec)}, + }; + psa_outvec out_vec[] = { + {.base = nonce, .len = nonce_size} + }; + + status = API_DISPATCH(in_vec, out_vec); + + *nonce_length = out_vec[0].len; + return status; +} + +TFM_CRYPTO_API(psa_status_t, psa_aead_set_nonce)(psa_aead_operation_t *operation, + const uint8_t *nonce, + size_t nonce_length) +{ + psa_status_t status; + struct tfm_crypto_pack_iovec iov = { + .function_id = TFM_CRYPTO_AEAD_SET_NONCE_SID, + .op_handle = operation->handle, + }; + + psa_invec in_vec[] = { + {.base = &iov, .len = sizeof(struct tfm_crypto_pack_iovec)}, + {.base = nonce, .len = nonce_length} + }; + + status = API_DISPATCH_NO_OUTVEC(in_vec); + return status; +} + +TFM_CRYPTO_API(psa_status_t, psa_aead_set_lengths)(psa_aead_operation_t *operation, + size_t ad_length, + size_t plaintext_length) +{ + psa_status_t status; + struct tfm_crypto_pack_iovec iov = { + .function_id = TFM_CRYPTO_AEAD_SET_LENGTHS_SID, + .ad_length = ad_length, + .plaintext_length = plaintext_length, + .op_handle = operation->handle, + }; + + psa_invec in_vec[] = { + {.base = &iov, .len = sizeof(struct tfm_crypto_pack_iovec)}, + }; + + status = API_DISPATCH_NO_OUTVEC(in_vec); + return status; +} + +TFM_CRYPTO_API(psa_status_t, psa_aead_update_ad)(psa_aead_operation_t *operation, + const uint8_t *input, + size_t input_length) +{ + psa_status_t status; + struct tfm_crypto_pack_iovec iov = { + .function_id = TFM_CRYPTO_AEAD_UPDATE_AD_SID, + .op_handle = operation->handle, + }; + + /* Sanitize the optional input */ + if ((input == NULL) && (input_length != 0)) { + return PSA_ERROR_INVALID_ARGUMENT; + } + + psa_invec in_vec[] = { + {.base = &iov, .len = sizeof(struct tfm_crypto_pack_iovec)}, + {.base = input, .len = input_length} + }; + + size_t in_len = IOVEC_LEN(in_vec); + + if (input == NULL) { + in_len--; + } + status = psa_call(TFM_CRYPTO_HANDLE, PSA_IPC_CALL, in_vec, in_len, + NULL, 0); + return status; +} + +TFM_CRYPTO_API(psa_status_t, psa_aead_update)(psa_aead_operation_t *operation, + const uint8_t *input, + size_t input_length, + uint8_t *output, + size_t output_size, + size_t *output_length) +{ + psa_status_t status; + struct tfm_crypto_pack_iovec iov = { + .function_id = TFM_CRYPTO_AEAD_UPDATE_SID, + .op_handle = operation->handle, + }; + + /* Sanitize the optional input */ + if ((input == NULL) && (input_length != 0)) { + return PSA_ERROR_INVALID_ARGUMENT; + } + + psa_invec in_vec[] = { + {.base = &iov, .len = sizeof(struct tfm_crypto_pack_iovec)}, + {.base = input, .len = input_length} + }; + psa_outvec out_vec[] = { + {.base = output, .len = output_size}, + }; + + size_t in_len = IOVEC_LEN(in_vec); + + if (input == NULL) { + in_len--; + } + status = psa_call(TFM_CRYPTO_HANDLE, PSA_IPC_CALL, in_vec, in_len, + out_vec, IOVEC_LEN(out_vec)); + + *output_length = out_vec[0].len; + return status; +} + +TFM_CRYPTO_API(psa_status_t, psa_aead_finish)(psa_aead_operation_t *operation, + uint8_t *ciphertext, + size_t ciphertext_size, + size_t *ciphertext_length, + uint8_t *tag, + size_t tag_size, + size_t *tag_length) +{ + psa_status_t status; + struct tfm_crypto_pack_iovec iov = { + .function_id = TFM_CRYPTO_AEAD_FINISH_SID, + .op_handle = operation->handle, + }; + + /* Sanitize the optional output */ + if ((ciphertext == NULL) && (ciphertext_size != 0)) { + return PSA_ERROR_INVALID_ARGUMENT; + } + + psa_invec in_vec[] = { + {.base = &iov, .len = sizeof(struct tfm_crypto_pack_iovec)}, + }; + psa_outvec out_vec[] = { + {.base = &(operation->handle), .len = sizeof(uint32_t)}, + {.base = tag, .len = tag_size}, + {.base = ciphertext, .len = ciphertext_size} + }; + + size_t out_len = IOVEC_LEN(out_vec); + + if (ciphertext == NULL || ciphertext_size == 0) { + out_len--; + } + if ((out_len == 3) && (ciphertext_length == NULL)) { + return PSA_ERROR_INVALID_ARGUMENT; + } + + status = psa_call(TFM_CRYPTO_HANDLE, PSA_IPC_CALL, + in_vec, IOVEC_LEN(in_vec), + out_vec, out_len); + + if (out_len == 3) { + *ciphertext_length = out_vec[2].len; + } else { + *ciphertext_length = 0; + } + + *tag_length = out_vec[1].len; + + return status; +} + +TFM_CRYPTO_API(psa_status_t, psa_aead_verify)(psa_aead_operation_t *operation, + uint8_t *plaintext, + size_t plaintext_size, + size_t *plaintext_length, + const uint8_t *tag, + size_t tag_length) +{ + psa_status_t status; + struct tfm_crypto_pack_iovec iov = { + .function_id = TFM_CRYPTO_AEAD_VERIFY_SID, + .op_handle = operation->handle, + }; + + /* Sanitize the optional output */ + if ((plaintext == NULL) && (plaintext_size != 0)) { + return PSA_ERROR_INVALID_ARGUMENT; + } + + psa_invec in_vec[] = { + {.base = &iov, .len = sizeof(struct tfm_crypto_pack_iovec)}, + {.base = tag, .len = tag_length} + }; + psa_outvec out_vec[] = { + {.base = &(operation->handle), .len = sizeof(uint32_t)}, + {.base = plaintext, .len = plaintext_size} + }; + + size_t out_len = IOVEC_LEN(out_vec); + + if (plaintext == NULL || plaintext_size == 0) { + out_len--; + } + if ((out_len == 2) && (plaintext_length == NULL)) { + return PSA_ERROR_INVALID_ARGUMENT; + } + + status = psa_call(TFM_CRYPTO_HANDLE, PSA_IPC_CALL, + in_vec, IOVEC_LEN(in_vec), + out_vec, out_len); + + if (out_len == 2) { + *plaintext_length = out_vec[1].len; + } else { + *plaintext_length = 0; + } + return status; +} + +TFM_CRYPTO_API(psa_status_t, psa_aead_abort)(psa_aead_operation_t *operation) +{ + struct tfm_crypto_pack_iovec iov = { + .function_id = TFM_CRYPTO_AEAD_ABORT_SID, + .op_handle = operation->handle, + }; + + psa_invec in_vec[] = { + {.base = &iov, .len = sizeof(struct tfm_crypto_pack_iovec)}, + }; + psa_outvec out_vec[] = { + {.base = &(operation->handle), .len = sizeof(uint32_t)}, + }; + + return API_DISPATCH(in_vec, out_vec); +} + +TFM_CRYPTO_API(psa_status_t, psa_sign_message)(psa_key_id_t key, + psa_algorithm_t alg, + const uint8_t *input, + size_t input_length, + uint8_t *signature, + size_t signature_size, + size_t *signature_length) +{ + psa_status_t status; + struct tfm_crypto_pack_iovec iov = { + .function_id = TFM_CRYPTO_ASYMMETRIC_SIGN_MESSAGE_SID, + .key_id = key, + .alg = alg, + }; + + psa_invec in_vec[] = { + {.base = &iov, .len = sizeof(struct tfm_crypto_pack_iovec)}, + {.base = input, .len = input_length}, + }; + psa_outvec out_vec[] = { + {.base = signature, .len = signature_size}, + }; + + status = API_DISPATCH(in_vec, out_vec); + + *signature_length = out_vec[0].len; + return status; +} + +TFM_CRYPTO_API(psa_status_t, psa_verify_message)(psa_key_id_t key, + psa_algorithm_t alg, + const uint8_t *input, + size_t input_length, + const uint8_t *signature, + size_t signature_length) +{ + struct tfm_crypto_pack_iovec iov = { + .function_id = TFM_CRYPTO_ASYMMETRIC_VERIFY_MESSAGE_SID, + .key_id = key, + .alg = alg + }; + + psa_invec in_vec[] = { + {.base = &iov, .len = sizeof(struct tfm_crypto_pack_iovec)}, + {.base = input, .len = input_length}, + {.base = signature, .len = signature_length} + }; + + return API_DISPATCH_NO_OUTVEC(in_vec); +} + +TFM_CRYPTO_API(psa_status_t, psa_sign_hash)(psa_key_id_t key, + psa_algorithm_t alg, + const uint8_t *hash, + size_t hash_length, + uint8_t *signature, + size_t signature_size, + size_t *signature_length) +{ + psa_status_t status; + struct tfm_crypto_pack_iovec iov = { + .function_id = TFM_CRYPTO_ASYMMETRIC_SIGN_HASH_SID, + .key_id = key, + .alg = alg, + }; + + psa_invec in_vec[] = { + {.base = &iov, .len = sizeof(struct tfm_crypto_pack_iovec)}, + {.base = hash, .len = hash_length}, + }; + psa_outvec out_vec[] = { + {.base = signature, .len = signature_size}, + }; + + status = API_DISPATCH(in_vec, out_vec); + + *signature_length = out_vec[0].len; + + return status; +} + +TFM_CRYPTO_API(psa_status_t, psa_verify_hash)(psa_key_id_t key, + psa_algorithm_t alg, + const uint8_t *hash, + size_t hash_length, + const uint8_t *signature, + size_t signature_length) +{ + struct tfm_crypto_pack_iovec iov = { + .function_id = TFM_CRYPTO_ASYMMETRIC_VERIFY_HASH_SID, + .key_id = key, + .alg = alg + }; + + psa_invec in_vec[] = { + {.base = &iov, .len = sizeof(struct tfm_crypto_pack_iovec)}, + {.base = hash, .len = hash_length}, + {.base = signature, .len = signature_length} + }; + + return API_DISPATCH_NO_OUTVEC(in_vec); +} + +TFM_CRYPTO_API(psa_status_t, psa_asymmetric_encrypt)(psa_key_id_t key, + psa_algorithm_t alg, + const uint8_t *input, + size_t input_length, + const uint8_t *salt, + size_t salt_length, + uint8_t *output, + size_t output_size, + size_t *output_length) +{ + psa_status_t status; + struct tfm_crypto_pack_iovec iov = { + .function_id = TFM_CRYPTO_ASYMMETRIC_ENCRYPT_SID, + .key_id = key, + .alg = alg + }; + + /* Sanitize the optional input */ + if ((salt == NULL) && (salt_length != 0)) { + return PSA_ERROR_INVALID_ARGUMENT; + } + + psa_invec in_vec[] = { + {.base = &iov, .len = sizeof(struct tfm_crypto_pack_iovec)}, + {.base = input, .len = input_length}, + {.base = salt, .len = salt_length} + }; + + psa_outvec out_vec[] = { + {.base = output, .len = output_size}, + }; + + size_t in_len = IOVEC_LEN(in_vec); + + if (salt == NULL) { + in_len--; + } + status = psa_call(TFM_CRYPTO_HANDLE, PSA_IPC_CALL, in_vec, in_len, + out_vec, IOVEC_LEN(out_vec)); + + *output_length = out_vec[0].len; + + return status; +} + +TFM_CRYPTO_API(psa_status_t, psa_asymmetric_decrypt)(psa_key_id_t key, + psa_algorithm_t alg, + const uint8_t *input, + size_t input_length, + const uint8_t *salt, + size_t salt_length, + uint8_t *output, + size_t output_size, + size_t *output_length) +{ + psa_status_t status; + struct tfm_crypto_pack_iovec iov = { + .function_id = TFM_CRYPTO_ASYMMETRIC_DECRYPT_SID, + .key_id = key, + .alg = alg + }; + + /* Sanitize the optional input */ + if ((salt == NULL) && (salt_length != 0)) { + return PSA_ERROR_INVALID_ARGUMENT; + } + + psa_invec in_vec[] = { + {.base = &iov, .len = sizeof(struct tfm_crypto_pack_iovec)}, + {.base = input, .len = input_length}, + {.base = salt, .len = salt_length} + }; + + psa_outvec out_vec[] = { + {.base = output, .len = output_size}, + }; + + size_t in_len = IOVEC_LEN(in_vec); + + if (salt == NULL) { + in_len--; + } + status = psa_call(TFM_CRYPTO_HANDLE, PSA_IPC_CALL, in_vec, in_len, + out_vec, IOVEC_LEN(out_vec)); + + *output_length = out_vec[0].len; + + return status; +} + +TFM_CRYPTO_API(psa_status_t, psa_key_derivation_get_capacity)( + const psa_key_derivation_operation_t *operation, + size_t *capacity) +{ + struct tfm_crypto_pack_iovec iov = { + .function_id = TFM_CRYPTO_KEY_DERIVATION_GET_CAPACITY_SID, + .op_handle = operation->handle, + }; + + psa_invec in_vec[] = { + {.base = &iov, .len = sizeof(struct tfm_crypto_pack_iovec)}, + }; + + psa_outvec out_vec[] = { + {.base = capacity, .len = sizeof(size_t)}, + }; + + return API_DISPATCH(in_vec, out_vec); +} + +TFM_CRYPTO_API(psa_status_t, psa_key_derivation_output_bytes)( + psa_key_derivation_operation_t *operation, + uint8_t *output, + size_t output_length) +{ + struct tfm_crypto_pack_iovec iov = { + .function_id = TFM_CRYPTO_KEY_DERIVATION_OUTPUT_BYTES_SID, + .op_handle = operation->handle, + }; + + psa_invec in_vec[] = { + {.base = &iov, .len = sizeof(struct tfm_crypto_pack_iovec)}, + }; + + psa_outvec out_vec[] = { + {.base = output, .len = output_length}, + }; + + return API_DISPATCH(in_vec, out_vec); +} + +TFM_CRYPTO_API(psa_status_t, psa_key_derivation_input_key)( + psa_key_derivation_operation_t *operation, + psa_key_derivation_step_t step, + psa_key_id_t key) +{ + struct tfm_crypto_pack_iovec iov = { + .function_id = TFM_CRYPTO_KEY_DERIVATION_INPUT_KEY_SID, + .key_id = key, + .step = step, + .op_handle = operation->handle, + }; + + psa_invec in_vec[] = { + {.base = &iov, .len = sizeof(struct tfm_crypto_pack_iovec)}, + }; + + return API_DISPATCH_NO_OUTVEC(in_vec); +} + +TFM_CRYPTO_API(psa_status_t, psa_key_derivation_abort)(psa_key_derivation_operation_t *operation) +{ + struct tfm_crypto_pack_iovec iov = { + .function_id = TFM_CRYPTO_KEY_DERIVATION_ABORT_SID, + .op_handle = operation->handle, + }; + + psa_invec in_vec[] = { + {.base = &iov, .len = sizeof(struct tfm_crypto_pack_iovec)}, + }; + + psa_outvec out_vec[] = { + {.base = &(operation->handle), .len = sizeof(uint32_t)}, + }; + + return API_DISPATCH(in_vec, out_vec); +} + +TFM_CRYPTO_API(psa_status_t, psa_key_derivation_key_agreement)( + psa_key_derivation_operation_t *operation, + psa_key_derivation_step_t step, + psa_key_id_t private_key, + const uint8_t *peer_key, + size_t peer_key_length) +{ + struct tfm_crypto_pack_iovec iov = { + .function_id = TFM_CRYPTO_KEY_DERIVATION_KEY_AGREEMENT_SID, + .key_id = private_key, + .step = step, + .op_handle = operation->handle, + }; + + psa_invec in_vec[] = { + {.base = &iov, .len = sizeof(struct tfm_crypto_pack_iovec)}, + {.base = peer_key, .len = peer_key_length}, + }; + + return API_DISPATCH_NO_OUTVEC(in_vec); +} + +TFM_CRYPTO_API(psa_status_t, psa_generate_random)(uint8_t *output, + size_t output_size) +{ + struct tfm_crypto_pack_iovec iov = { + .function_id = TFM_CRYPTO_GENERATE_RANDOM_SID, + }; + + psa_invec in_vec[] = { + {.base = &iov, .len = sizeof(struct tfm_crypto_pack_iovec)}, + }; + + psa_outvec out_vec[] = { + {.base = output, .len = output_size}, + }; + + if (output_size == 0) { + return PSA_SUCCESS; + } + + return API_DISPATCH(in_vec, out_vec); +} + +TFM_CRYPTO_API(psa_status_t, psa_generate_key)(const psa_key_attributes_t *attributes, + psa_key_id_t *key) +{ + struct tfm_crypto_pack_iovec iov = { + .function_id = TFM_CRYPTO_GENERATE_KEY_SID, + }; + + psa_invec in_vec[] = { + {.base = &iov, .len = sizeof(struct tfm_crypto_pack_iovec)}, + {.base = attributes, .len = sizeof(psa_key_attributes_t)}, + }; + + psa_outvec out_vec[] = { + {.base = key, .len = sizeof(psa_key_id_t)}, + }; + + return API_DISPATCH(in_vec, out_vec); +} + +TFM_CRYPTO_API(psa_status_t, psa_mac_compute)(psa_key_id_t key, + psa_algorithm_t alg, + const uint8_t *input, + size_t input_length, + uint8_t *mac, + size_t mac_size, + size_t *mac_length) +{ + psa_status_t status; + struct tfm_crypto_pack_iovec iov = { + .function_id = TFM_CRYPTO_MAC_COMPUTE_SID, + .key_id = key, + .alg = alg, + }; + + psa_invec in_vec[] = { + {.base = &iov, .len = sizeof(struct tfm_crypto_pack_iovec)}, + {.base = input, .len = input_length}, + }; + psa_outvec out_vec[] = { + {.base = mac, .len = mac_size}, + }; + + status = API_DISPATCH(in_vec, out_vec); + + *mac_length = out_vec[0].len; + return status; +} + +TFM_CRYPTO_API(psa_status_t, psa_mac_verify)(psa_key_id_t key, + psa_algorithm_t alg, + const uint8_t *input, + size_t input_length, + const uint8_t *mac, + const size_t mac_length) +{ + struct tfm_crypto_pack_iovec iov = { + .function_id = TFM_CRYPTO_MAC_VERIFY_SID, + .key_id = key, + .alg = alg, + }; + + psa_invec in_vec[] = { + {.base = &iov, .len = sizeof(struct tfm_crypto_pack_iovec)}, + {.base = input, .len = input_length}, + {.base = mac, .len = mac_length}, + }; + + return API_DISPATCH_NO_OUTVEC(in_vec); +} + +TFM_CRYPTO_API(psa_status_t, psa_cipher_encrypt)(psa_key_id_t key, + psa_algorithm_t alg, + const uint8_t *input, + size_t input_length, + uint8_t *output, + size_t output_size, + size_t *output_length) +{ + psa_status_t status; + struct tfm_crypto_pack_iovec iov = { + .function_id = TFM_CRYPTO_CIPHER_ENCRYPT_SID, + .key_id = key, + .alg = alg, + }; + + psa_invec in_vec[] = { + {.base = &iov, .len = sizeof(struct tfm_crypto_pack_iovec)}, + {.base = input, .len = input_length}, + }; + psa_outvec out_vec[] = { + {.base = output, .len = output_size} + }; + + status = API_DISPATCH(in_vec, out_vec); + + *output_length = out_vec[0].len; + return status; +} + +TFM_CRYPTO_API(psa_status_t, psa_cipher_decrypt)(psa_key_id_t key, + psa_algorithm_t alg, + const uint8_t *input, + size_t input_length, + uint8_t *output, + size_t output_size, + size_t *output_length) +{ + psa_status_t status; + struct tfm_crypto_pack_iovec iov = { + .function_id = TFM_CRYPTO_CIPHER_DECRYPT_SID, + .key_id = key, + .alg = alg, + }; + + psa_invec in_vec[] = { + {.base = &iov, .len = sizeof(struct tfm_crypto_pack_iovec)}, + {.base = input, .len = input_length}, + }; + psa_outvec out_vec[] = { + {.base = output, .len = output_size} + }; + + status = API_DISPATCH(in_vec, out_vec); + + *output_length = out_vec[0].len; + return status; +} + +TFM_CRYPTO_API(psa_status_t, psa_raw_key_agreement)(psa_algorithm_t alg, + psa_key_id_t private_key, + const uint8_t *peer_key, + size_t peer_key_length, + uint8_t *output, + size_t output_size, + size_t *output_length) +{ + psa_status_t status; + struct tfm_crypto_pack_iovec iov = { + .function_id = TFM_CRYPTO_RAW_KEY_AGREEMENT_SID, + .alg = alg, + .key_id = private_key + }; + + psa_invec in_vec[] = { + {.base = &iov, .len = sizeof(struct tfm_crypto_pack_iovec)}, + {.base = peer_key, .len = peer_key_length}, + }; + + psa_outvec out_vec[] = { + {.base = output, .len = output_size}, + }; + + status = API_DISPATCH(in_vec, out_vec); + + *output_length = out_vec[0].len; + + return status; +} + +TFM_CRYPTO_API(psa_status_t, psa_key_derivation_setup)(psa_key_derivation_operation_t *operation, + psa_algorithm_t alg) +{ + struct tfm_crypto_pack_iovec iov = { + .function_id = TFM_CRYPTO_KEY_DERIVATION_SETUP_SID, + .alg = alg, + .op_handle = operation->handle, + }; + + psa_invec in_vec[] = { + {.base = &iov, .len = sizeof(struct tfm_crypto_pack_iovec)}, + }; + psa_outvec out_vec[] = { + {.base = &(operation->handle), .len = sizeof(uint32_t)}, + }; + + return API_DISPATCH(in_vec, out_vec); +} + +TFM_CRYPTO_API(psa_status_t, psa_key_derivation_set_capacity)( + psa_key_derivation_operation_t *operation, + size_t capacity) +{ + struct tfm_crypto_pack_iovec iov = { + .function_id = TFM_CRYPTO_KEY_DERIVATION_SET_CAPACITY_SID, + .capacity = capacity, + .op_handle = operation->handle, + }; + + psa_invec in_vec[] = { + {.base = &iov, .len = sizeof(struct tfm_crypto_pack_iovec)}, + }; + + return API_DISPATCH_NO_OUTVEC(in_vec); +} + +TFM_CRYPTO_API(psa_status_t, psa_key_derivation_input_bytes)( + psa_key_derivation_operation_t *operation, + psa_key_derivation_step_t step, + const uint8_t *data, + size_t data_length) +{ + struct tfm_crypto_pack_iovec iov = { + .function_id = TFM_CRYPTO_KEY_DERIVATION_INPUT_BYTES_SID, + .step = step, + .op_handle = operation->handle, + }; + + psa_invec in_vec[] = { + {.base = &iov, .len = sizeof(struct tfm_crypto_pack_iovec)}, + {.base = data, .len = data_length}, + }; + + return API_DISPATCH_NO_OUTVEC(in_vec); +} + +TFM_CRYPTO_API(psa_status_t, psa_key_derivation_output_key)( + const psa_key_attributes_t *attributes, + psa_key_derivation_operation_t *operation, + psa_key_id_t *key) +{ + struct tfm_crypto_pack_iovec iov = { + .function_id = TFM_CRYPTO_KEY_DERIVATION_OUTPUT_KEY_SID, + .op_handle = operation->handle, + }; + + psa_invec in_vec[] = { + {.base = &iov, .len = sizeof(struct tfm_crypto_pack_iovec)}, + {.base = attributes, .len = sizeof(psa_key_attributes_t)}, + }; + + psa_outvec out_vec[] = { + {.base = key, .len = sizeof(psa_key_id_t)} + }; + + return API_DISPATCH(in_vec, out_vec); +} + +TFM_CRYPTO_API(psa_status_t, psa_pake_setup) +(psa_pake_operation_t *operation, psa_key_id_t password_key, + const psa_pake_cipher_suite_t *cipher_suite) { + struct tfm_crypto_pack_iovec iov = {.function_id = TFM_CRYPTO_PAKE_SETUP_SID, + .op_handle = operation->handle, + .key_id = password_key}; + + psa_invec in_vec[] = { + {.base = &iov, .len = sizeof(struct tfm_crypto_pack_iovec)}, + {.base = cipher_suite, .len = sizeof(psa_pake_cipher_suite_t)}, + }; + + psa_outvec out_vec[] = { + {.base = &(operation->handle), .len = sizeof(uint32_t)}, + }; + + return API_DISPATCH(in_vec, out_vec); +} + +TFM_CRYPTO_API(psa_status_t, psa_pake_set_role) +(psa_pake_operation_t *operation, psa_pake_role_t role) { + struct tfm_crypto_pack_iovec iov = { + .function_id = TFM_CRYPTO_PAKE_SET_ROLE_SID, + .op_handle = operation->handle, + .role = role, + }; + + psa_invec in_vec[] = { + {.base = &iov, .len = sizeof(struct tfm_crypto_pack_iovec)}, + }; + + return API_DISPATCH_NO_OUTVEC(in_vec); +} + +TFM_CRYPTO_API(psa_status_t, psa_pake_set_user) +(psa_pake_operation_t *operation, const uint8_t *user_id, size_t user_id_len) { + struct tfm_crypto_pack_iovec iov = { + .function_id = TFM_CRYPTO_PAKE_SET_USER_SID, + .op_handle = operation->handle, + }; + + psa_invec in_vec[] = { + {.base = &iov, .len = sizeof(struct tfm_crypto_pack_iovec)}, + {.base = user_id, .len = user_id_len}, + }; + + return API_DISPATCH_NO_OUTVEC(in_vec); +} + +TFM_CRYPTO_API(psa_status_t, psa_pake_set_peer) +(psa_pake_operation_t *operation, const uint8_t *peer_id, size_t peer_id_len) { + struct tfm_crypto_pack_iovec iov = { + .function_id = TFM_CRYPTO_PAKE_SET_PEER_SID, + .op_handle = operation->handle, + }; + + psa_invec in_vec[] = { + {.base = &iov, .len = sizeof(struct tfm_crypto_pack_iovec)}, + {.base = peer_id, .len = peer_id_len}, + }; + + return API_DISPATCH_NO_OUTVEC(in_vec); +} + +TFM_CRYPTO_API(psa_status_t, psa_pake_set_context) +(psa_pake_operation_t *operation, const uint8_t *context, size_t context_len) { + struct tfm_crypto_pack_iovec iov = { + .function_id = TFM_CRYPTO_PAKE_SET_CONTEXT_SID, + .op_handle = operation->handle, + }; + + psa_invec in_vec[] = { + {.base = &iov, .len = sizeof(struct tfm_crypto_pack_iovec)}, + {.base = context, .len = context_len}, + }; + + return API_DISPATCH_NO_OUTVEC(in_vec); +} + +TFM_CRYPTO_API(psa_status_t, psa_pake_output) +(psa_pake_operation_t *operation, psa_pake_step_t step, uint8_t *output, + size_t output_size, size_t *output_length) { + psa_status_t status = PSA_ERROR_CORRUPTION_DETECTED; + struct tfm_crypto_pack_iovec iov = { + .function_id = TFM_CRYPTO_PAKE_OUTPUT_SID, + .op_handle = operation->handle, + .step = step, + }; + + psa_invec in_vec[] = { + {.base = &iov, .len = sizeof(struct tfm_crypto_pack_iovec)}, + }; + + psa_outvec out_vec[] = {{.base = output, .len = output_size}}; + + status = API_DISPATCH(in_vec, out_vec); + + *output_length = out_vec[0].len; + + return status; +} + +TFM_CRYPTO_API(psa_status_t, psa_pake_input) +(psa_pake_operation_t *operation, psa_pake_step_t step, const uint8_t *input, + size_t input_length) { + struct tfm_crypto_pack_iovec iov = { + .function_id = TFM_CRYPTO_PAKE_INPUT_SID, + .op_handle = operation->handle, + .step = step, + }; + + psa_invec in_vec[] = { + {.base = &iov, .len = sizeof(struct tfm_crypto_pack_iovec)}, + {.base = input, .len = input_length}, + }; + + return API_DISPATCH_NO_OUTVEC(in_vec); +} + +TFM_CRYPTO_API(psa_status_t, psa_pake_get_shared_key) +(psa_pake_operation_t *operation, const psa_key_attributes_t *attributes, + mbedtls_svc_key_id_t *key) { + struct tfm_crypto_pack_iovec iov = { + .function_id = TFM_CRYPTO_PAKE_GET_SHARED_KEY_SID, + .op_handle = operation->handle, + }; + + psa_invec in_vec[] = { + {.base = &iov, .len = sizeof(struct tfm_crypto_pack_iovec)}, + {.base = attributes, .len = sizeof(psa_key_attributes_t)}, + }; + + psa_outvec out_vec[] = { + {.base = &(operation->handle), .len = sizeof(uint32_t)}, + {.base = key, .len = sizeof(mbedtls_svc_key_id_t)}}; + + return API_DISPATCH(in_vec, out_vec); +} + +TFM_CRYPTO_API(psa_status_t, psa_pake_abort)(psa_pake_operation_t *operation) { + struct tfm_crypto_pack_iovec iov = { + .function_id = TFM_CRYPTO_PAKE_ABORT_SID, + .op_handle = operation->handle, + }; + + psa_invec in_vec[] = { + {.base = &iov, .len = sizeof(struct tfm_crypto_pack_iovec)}, + }; + psa_outvec out_vec[] = { + {.base = &(operation->handle), .len = sizeof(uint32_t)}, + }; + + return API_DISPATCH(in_vec, out_vec); +} + +TFM_CRYPTO_API(psa_status_t, psa_key_derivation_input_integer)( + psa_key_derivation_operation_t *operation, + psa_key_derivation_step_t step, + uint64_t value) +{ + struct tfm_crypto_pack_iovec iov = { + .function_id = TFM_CRYPTO_KEY_DERIVATION_INPUT_INTEGER_SID, + .step = step, + .value = value, + .op_handle = operation->handle, + }; + + psa_invec in_vec[] = { + {.base = &iov, .len = sizeof(struct tfm_crypto_pack_iovec)}, + }; + + return API_DISPATCH_NO_OUTVEC(in_vec); +} + +TFM_CRYPTO_API(psa_status_t, psa_key_derivation_verify_bytes)( + psa_key_derivation_operation_t *operation, + const uint8_t *expected_output, + size_t output_length) +{ + /* To be implemented when the PSA backend supports it */ + return PSA_ERROR_NOT_SUPPORTED; +} + +TFM_CRYPTO_API(psa_status_t, psa_key_derivation_verify_key)( + psa_key_derivation_operation_t *operation, + psa_key_id_t expected) +{ + /* To be implemented when the PSA backend supports it */ + return PSA_ERROR_NOT_SUPPORTED; +} diff --git a/nrfdemo/build/tfm/api_ns/interface/src/tfm_ioctl_core_ns_api.c b/nrfdemo/build/tfm/api_ns/interface/src/tfm_ioctl_core_ns_api.c new file mode 100644 index 0000000..2370988 --- /dev/null +++ b/nrfdemo/build/tfm/api_ns/interface/src/tfm_ioctl_core_ns_api.c @@ -0,0 +1,68 @@ +/* + * Copyright (c) 2021 Nordic Semiconductor ASA + * + * SPDX-License-Identifier: BSD-3-Clause + */ + +#include "nrf.h" +#include <stdint.h> +#include <tfm_platform_api.h> +#include <tfm_ioctl_core_api.h> + +enum tfm_platform_err_t tfm_platform_mem_read(void *destination, uint32_t addr, + size_t len, uint32_t *result) +{ + enum tfm_platform_err_t ret; + psa_invec in_vec; + psa_outvec out_vec; + struct tfm_read_service_args_t args; + struct tfm_read_service_out_t out; + + in_vec.base = (const void *)&args; + in_vec.len = sizeof(args); + + out_vec.base = (void *)&out; + out_vec.len = sizeof(out); + + args.destination = destination; + args.addr = addr; + args.len = len; + + ret = tfm_platform_ioctl(TFM_PLATFORM_IOCTL_READ_SERVICE, &in_vec, + &out_vec); + + *result = out.result; + + return ret; +} + +enum tfm_platform_err_t tfm_platform_gpio_pin_mcu_select(uint32_t pin_number, uint32_t mcu, + uint32_t *result) +{ +#if defined(GPIO_PIN_CNF_MCUSEL_Msk) + enum tfm_platform_err_t ret; + psa_invec in_vec; + psa_outvec out_vec; + struct tfm_gpio_service_args args; + struct tfm_gpio_service_out out; + + args.type = TFM_GPIO_SERVICE_TYPE_PIN_MCU_SELECT; + args.mcu_select.pin_number = pin_number; + args.mcu_select.mcu = mcu; + + in_vec.base = (const void *)&args; + in_vec.len = sizeof(args); + + out_vec.base = (void *)&out; + out_vec.len = sizeof(out); + + ret = tfm_platform_ioctl(TFM_PLATFORM_IOCTL_GPIO_SERVICE, &in_vec, + &out_vec); + + *result = out.result; + + return ret; +#else + return TFM_PLATFORM_ERR_NOT_SUPPORTED; +#endif +} diff --git a/nrfdemo/build/tfm/api_ns/interface/src/tfm_platform_api.c b/nrfdemo/build/tfm/api_ns/interface/src/tfm_platform_api.c new file mode 100644 index 0000000..4fc564b --- /dev/null +++ b/nrfdemo/build/tfm/api_ns/interface/src/tfm_platform_api.c @@ -0,0 +1,109 @@ +/* + * Copyright (c) 2019-2022, Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: BSD-3-Clause + * + */ + +#include <stdbool.h> +#include "tfm_platform_api.h" +#include "psa/client.h" +#include "psa_manifest/sid.h" + +enum tfm_platform_err_t tfm_platform_system_reset(void) +{ + psa_status_t status = PSA_ERROR_CONNECTION_REFUSED; + + status = psa_call(TFM_PLATFORM_SERVICE_HANDLE, + TFM_PLATFORM_API_ID_SYSTEM_RESET, + NULL, 0, NULL, 0); + + if (status < PSA_SUCCESS) { + return TFM_PLATFORM_ERR_SYSTEM_ERROR; + } else { + return (enum tfm_platform_err_t)status; + } + +} + +enum tfm_platform_err_t +tfm_platform_ioctl(tfm_platform_ioctl_req_t request, + psa_invec *input, psa_outvec *output) +{ + tfm_platform_ioctl_req_t req = request; + struct psa_invec in_vec[2] = { {0} }; + size_t inlen, outlen; + psa_status_t status = PSA_ERROR_CONNECTION_REFUSED; + + in_vec[0].base = &req; + in_vec[0].len = sizeof(req); + if (input != NULL) { + in_vec[1].base = input->base; + in_vec[1].len = input->len; + inlen = 2; + } else { + inlen = 1; + } + + if (output != NULL) { + outlen = 1; + } else { + outlen = 0; + } + + status = psa_call(TFM_PLATFORM_SERVICE_HANDLE, + TFM_PLATFORM_API_ID_IOCTL, + in_vec, inlen, + output, outlen); + + if (status < PSA_SUCCESS) { + return TFM_PLATFORM_ERR_SYSTEM_ERROR; + } else { + return (enum tfm_platform_err_t)status; + } +} + +enum tfm_platform_err_t +tfm_platform_nv_counter_increment(uint32_t counter_id) +{ + psa_status_t status = PSA_ERROR_CONNECTION_REFUSED; + struct psa_invec in_vec[1]; + + in_vec[0].base = &counter_id; + in_vec[0].len = sizeof(counter_id); + + status = psa_call(TFM_PLATFORM_SERVICE_HANDLE, + TFM_PLATFORM_API_ID_NV_INCREMENT, + in_vec, 1, (psa_outvec *)NULL, 0); + + if (status < PSA_SUCCESS) { + return TFM_PLATFORM_ERR_SYSTEM_ERROR; + } else { + return (enum tfm_platform_err_t)status; + } +} + +enum tfm_platform_err_t +tfm_platform_nv_counter_read(uint32_t counter_id, + uint32_t size, uint8_t *val) +{ + psa_status_t status = PSA_ERROR_CONNECTION_REFUSED; + struct psa_invec in_vec[1]; + struct psa_outvec out_vec[1]; + + in_vec[0].base = &counter_id; + in_vec[0].len = sizeof(counter_id); + + out_vec[0].base = val; + out_vec[0].len = size; + + status = psa_call(TFM_PLATFORM_SERVICE_HANDLE, + TFM_PLATFORM_API_ID_NV_READ, + in_vec, 1, out_vec, 1); + + if (status < PSA_SUCCESS) { + return TFM_PLATFORM_ERR_SYSTEM_ERROR; + } else { + return (enum tfm_platform_err_t)status; + } +} diff --git a/nrfdemo/build/tfm/api_ns/interface/src/tfm_tz_psa_ns_api.c b/nrfdemo/build/tfm/api_ns/interface/src/tfm_tz_psa_ns_api.c new file mode 100644 index 0000000..1f9fbe4 --- /dev/null +++ b/nrfdemo/build/tfm/api_ns/interface/src/tfm_tz_psa_ns_api.c @@ -0,0 +1,63 @@ +/* + * Copyright (c) 2018-2022, Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: BSD-3-Clause + * + */ + +#include "psa/client.h" +#include "tfm_ns_interface.h" +#include "tfm_psa_call_pack.h" + +/**** API functions ****/ + +uint32_t psa_framework_version(void) +{ + return tfm_ns_interface_dispatch( + (veneer_fn)tfm_psa_framework_version_veneer, + 0, + 0, + 0, + 0); +} + +uint32_t psa_version(uint32_t sid) +{ + return tfm_ns_interface_dispatch( + (veneer_fn)tfm_psa_version_veneer, + sid, + 0, + 0, + 0); +} + +psa_status_t psa_call(psa_handle_t handle, int32_t type, + const psa_invec *in_vec, + size_t in_len, + psa_outvec *out_vec, + size_t out_len) +{ + if ((type > PSA_CALL_TYPE_MAX) || + (type < PSA_CALL_TYPE_MIN) || + (in_len > PSA_MAX_IOVEC) || + (out_len > PSA_MAX_IOVEC)) { + return PSA_ERROR_PROGRAMMER_ERROR; + } + + return tfm_ns_interface_dispatch( + (veneer_fn)tfm_psa_call_veneer, + (uint32_t)handle, + PARAM_PACK(type, in_len, out_len), + (uint32_t)in_vec, + (uint32_t)out_vec); +} + +psa_handle_t psa_connect(uint32_t sid, uint32_t version) +{ + return tfm_ns_interface_dispatch((veneer_fn)tfm_psa_connect_veneer, sid, version, 0, 0); +} + +void psa_close(psa_handle_t handle) +{ + (void)tfm_ns_interface_dispatch((veneer_fn)tfm_psa_close_veneer, (uint32_t)handle, 0, 0, 0); +} |